Waste incineration,PVC, and dioxins

Waste incineration is becoming increasingly necessary to tackle the rapidly rising amounts of municipal solid waste (MSW); in China many large cities are already surrounded by a girdle of landfills. Still, the not-in-my-backyard (nimby) syndrome holds strong. This attitude stems from fear of dioxins. These have been associated with incineration (‘dioxin factories’) and at times also with polyvinylchloride. In this paper this issue is analysed. China should build additional trust in MSW incineration, following promulgation of stricter emission standards, enforced by stringent controls.     

Extruded Cornstarch-Glycerol-Polyvinyl Alcohol Blends: Mechanical Properties, Morphology, and Biodegradability

Elongation properties of extruded cornstarch were improved by blending with glycerol. Further blending of starch-glycerol with polyvinyl alcohol (PVOH) resulted in significant improvements in both tensile strength (TS) and elongation at break. Samples of starch-glycerol without PVOH equilibrated at 50% relative humidity had a TS of 1.8 MPa and elongation of 113%, whereas those containing PVOH had a TS and elongation of 4 MPa and 150%, respectively. Dynamic mechanical analysis (DMA) of starch-glycerol-PVOH blends showed that decreases in glass transition temperatures (T _g values) were proportional to glycerol content. Scanning electron microscopy (SEM) of fractured surfaces revealed numerous cracks in starch-glycerol (80:20) samples. Cracks were absent in starch-glycerol (70:30) samples. In both blends, many starch granules were exposed at the surface. No exposed starch granules were visible in blends with added PVOH. Starch-glycerol samples incubated in compost lost up to 70% of their dry weight within 22 days. Addition of PVOH lowered both the rate and extent of biodegradation.     

Atmospheric Metal Pollutants-Archives, Methods, and History

Pollution of the atmosphere with cadmium (Cd), mercury (Hg), and lead (Pb) is a consequence of human activities. Natural archives are necessary to reconstruct the long-term history of metal deposition because accurate measurement of atmospheric deposition is a recent accomplishment. Reconstructions require: (1) accurate determination of concentrations of elements and isotopes, (2) accurate chronology of archives, and (3) archives that faithfully record atmosphere deposition. The most useful long-term archives are accumulations of ice and snow, peat, and lake sediment. Quantification of Cd deposition is uncommon because of its low concentration and substantial chemical mobility. Nonetheless, trends in peat and lake sediment are similar to those of Hg and Pb since ca. 1800 a.d. Both Hg and Pb are relatively chemically immobile and thus the peat and lake archives are believed to record historic trends of atmospheric deposition. Isotopic and concentration studies of Pb indicate a history of northern hemisphere atmospheric pollution extending back prior to 0 a.d. Although measurements of Hg concentration are now routine, isotopic measurements are in their infancy. Some Hg pollution sources have unique isotopic ratios, thereby contributing unique signals to the total Hg. Maximum accumulation rates of Hg and Pb occur up to 10 years later than for Cd (1970s versus 1960s in eastern North America, perhaps slightly later in Europe). By 2004, deposition of Cd, Hg, and Pb had declined from peak values in eastern North America more than 75, 75, and 90%, respectively.     

Remediation,land use,and risk at Hanford

U.S. Department of Energy (US DOE) remediation responsibilities include the Hanford site in Washington State. Cleanup is governed by the Tri‐Party Agreement (TPA) between the US DOE as the responsible party and the U.S. Environmental Protection Agency and Washington State Department of Ecology as joint regulators. In 2003, the US DOE desired to implement a “Risk‐Based End State” (RBES) policy at Hanford, with remediation measures driven by acceptable risk standards using exposure scenarios based on the 1999 Hanford Comprehensive Land‐Use Plan. Facing resistance from regulators and stakeholders, the US DOE solicited public input on its policy. This led to a Hanford Site End State Vision in 2005 and a commitment that the TPA would continue to control remediation. This article describes how regulator and public participation modified RBES to an end‐state vision. © 2010 Wiley Periodicals, Inc.     

Synthesis, Characterization, and Hydrolytic Degradation of Copolymers of 2-Methylene-1,3-dioxepane with Ethylene and with Styrene

2-Methylene-1,3-dioxepane (MDP) was copolymerized with ethylene (E) at a pressure of approximately 1000 psi and a temperature of approximately 70°C with AIBN as the free radical initiator. The copolymers obtained, poly(MDP-co-E), were characterized by elemental analysis, IR, ¹H-NMR and ¹³C-NMR spectroscopy, DSC, and GPC. The copolymers contained 2–15 mol% ester units. MDP was also copolymerized with styrene (S) at 120°C with di-t-butyl peroxide as the initiator to prepare the copolymer, poly(MDP-co-S). The number-average molecular weights of both types of copolymers were in the range of 6000 to 11,000, and the weight-average molecular weights were in the range of 9000 to 17,000. The melting temperatures of poly(MDP-co-E) decreased with increasing ester unit content in the copolymer. For the MDP-S copolymers, the glass transition temperatures decreased with increasing ester unit content. Both poly(MDP-co-E) and poly(MDP-co-S) were degraded by methanolysis, and their molecular weights decreased by the expected amounts based on the ester unit content.     

Physical Properties, Photo- and Bio-degradation of Baked Foams Based on Cassava Starch, Sugarcane Bagasse Fibers and Montmorillonite

The objectives of this work were to develop biodegradable trays from cassava starch, sugarcane fibers and Na-montmorillonite (Na-MMT) using a baking process and to study the effects of these components on the physical properties, photo- and bio-degradation of the trays. The sample F20 (produced with 20 g fiber/100 g formulation) showed the maximum yield production (100 %). All formulations resulted in well-shaped trays with densities between 0.1941 and 0.2966 g/cm³. The addition of fibers and Na-MMT resulted in less dense and less rigid trays compared to control samples (only starch). The studied processing conditions resulted in good nanoclay dispersion, leading to the formation of an exfoliated structure. The evaluation of the photo-degradation stability of the trays under UV exposure for 336 h showed that a sample produced with a specific combination of fiber and nanoclay (20 g fiber and 5 g nanoclay/100 g formulation) had the highest loss in stress at break (91 %). Biodegradation assays showed that Control trays (starch) and F20 (20 g fiber/100 g formulation) lost a greater percentage of their weight after 90 days of incubation in soil, with losses of up to 85.50 and 82.70 %, respectively.     

Tensile Strength, Elongation, Hardness, and Tensile and Flexural Moduli of Injection-Molded TPS Filled with Glycerol-Plasticized DDGS

Continuing growth of biofuel industries is generating large amounts of coproducts such as distillers dried grains with solubles (DDGS) from ethanol production and glycerol from biodiesel. Currently these coproducts are undervalued, but they have application in the plastics industry as property modifiers. This research effort has quantified the effects on mechanical properties of adding DDGS and glycerol to a commercial thermoplastic starch (TPS). The methodology was to physically mix DDGS, as filler, with the TPS pellets and injection mold the blends into test bars using glycerol as a processing aid. The bars were then mechanically tested with blends from 0 to 65 %, by weight, of plasticized filler. The test bars were typically relatively brittle with little yielding prior to fracture with elongation between 1 and 3 %. The addition of glycerol enabled molding of blends with high levels of DDGS but did not increase strength. Any presence of filler decreased the tensile strength of the starch, and up to 30 % filler, the tensile strength drops about 15 %. The 20 and 50 % blends (without glycerol) have slightly greater stiffness than pure starch. With some other blends, the presence of plasticized filler degrades the tensile modulus with 35 % filler yielding about 1/3 the stiffness. Changes in the flexural modulus are much more pronounced as 20–25 % filled TPS has a 30 % increase in flexural stiffness. In terms of surface hardness, blends up to 60 % filler are within 20 % of the TPS baseline.     

Effects of Compatibilizer and Thermoplastic Starch (TPS) Concentration on Morphological,Rheological, Tensile,Thermal and Moisture Sorption Properties of Plasticized Polylactic Acid/TPS Blends

The blends of polylactic acid plasticized with acetyl tributyl citrate (P-PLA) and thermoplastic wheat starch (TPS) were prepared by a co-rotating twin screw extruder and the effect of maleic anhydride grafted PLA (PLA-g-MA) content as reactive compatibilizer on blends compatibility through morphological, rheological and tensile properties of the blends was investigated. Considerable improvement in properties of P-PLA/TPS (70/30 w/w) blend with incorporating the optimum PLA-g-MA content of 4 phr was achieved as this blend exhibited better morphological and rheological properties with an increase by 158 and 276% in tensile strength and elongation at break, respectively, compared to the uncompatibilized blend. Also the thermal stability and moisture sorption properties of the blends as effected by TPS content were studied. Decreasing in thermal stability and increasing in equilibrium moisture content of the blends were observed with progressively increasing of TPS content. For prediction the moisture sorption behaviour of blends with various TPS contents at different relative humidity, the moisture sorption isotherm data were modeled by GAB (Guggenheim–Anderson–de Boer) model.     

Poly(aspartic acid): Synthesis, biodegradation, and current applications

Poly(aspartic acid) is a biodegradable, water-soluble polymer that is valuable in numerous industrial applications. A variety of synthetic methods can be utilized to prepare poly(aspartic acid) and related polymeric materials with a range of tailored physical and chemical characteristics. This review of current investigative and patent literature describes methods of synthesis, biodegradative studies, and important current and potential applications of both poly(aspartic acid) homopolymers and copolymers.     

Trends in Fish Community Structure,Biomass, and Production in Three Algoma,Ontario, Lakes

Long-term (i.e. >10 years) whole community fish dataincluding catch-per-unit-effort, abundance, biomass, andproduction from three lakes were used: 1) to examine variabilityin fish population and community measures among years using wholelake assessments of fish populations derived from mark recaptureexperiments, 2) to assess implications arising from monitoringindividual species vs. the whole fish community, and 3) toascertain whether, in fisheries assessments (science) a commonlyused surrogate measure, [catch-per-unit-effort (CPUE)] reflectedannual changes in the fish assemblage, and thus may be a goodestimator of abundance. High, long-term variability was evident in the abundance andbiomass of a fish species in our lakes, yet the communityremained relatively stable in terms of its biomass andproduction. Changes in total fish community biomass appear drivenby large species, which, relative to small fish species, remainstable among years. Among years, species richness remainedstable; however, fish species changed in the community. AnnualCPUE was found to be a suitable surrogate for abundance (N) ofsmall fishes; CPUE x mean weight of the catch (bCPUE) was asuitable surrogate for biomass (B) of large fishes. Prior toconcluding that a change in a fish population has occurred as aresult of a stressor, care must be taken to critically examinethe level of population assessment in order to avoid acceptingpotentially invalid conclusions.     

Physical,Mechanical, and Morphological Characteristics of Extruded Starch Acetate Foams

Starch acetates with degrees of substitution (DS) of 0.57, 1.11, 1.68, and 2.23 were prepared and extruded with either water or ethanol. The microstructure, physical properties (radial expansion ratio [RER] and unit density), mechanical properties (spring index [SI] and compressibility), and crystalline structure of the foams were investigated. The functional properties were a function of DS and blowing agent type. When water was used as the blowing agent and DS increased, the foams were pale yellow, with rough and uneven surfaces. The cells were dense, with thick cell walls. Lower RER and SI, with higher DS, were associated with high unit density and compressibility. When ethanol was used as the blowing agent, contrary results were observed. The snow-white foams had smooth surfaces, uniform cells, and smooth cell walls. High RER and SI, and low unit density and compressibility were observed. The changes in SI and compressibility with RER also were examined and found to depend on the type of solvent. A crystalline pattern was observed because of the formation of well-ordered structures during extrusion.     

Yields of Dissolved Organic C,N, and P. from Three High-Elevation Catchments,Colorado Front Range,U.S.A.

Ecosystem dynamics in high-elevation watersheds are extremely sensitive to changes in chemical, energy, and water fluxes. Here we report information on yields of dissolved organic C, N, and P for the 1999 snowmelt runoff season from three high-elevation catchments in the Colorado Front Range, U.S.A.: Green Lake 4 (GL4) and Albion townsite (ALB) on North Boulder Creek and the Saddle Stream (SS), a tributary catchment dominated by alpine tundra. Dissolved organic carbon (DOC) concentrations in stream waters ranged from <1 to 10 mg C L^-1, with the highest values occurring at the SS site. Dissolved organic nitrogen (DON) concentrations ranged from below detection limits to 0.28 mg N L^-1 and were again highest at the tundra-dominatedsite. Dissolved organic phosphorus (DOP) concentrations were at or near detection limits throughout the season in all three catchments indicating a strong terrestrial retention of P. OnlyDOC showed a significant relationship to discharge. Yields of DOC in the three catchments ranged from 10.6 to 11.8 kg C ha^-1 while yields of DON and DOP ranged from 0.32 to 0.41 and 0.02 to 0.08 kg ha^-1, respectively. The relatively highyield of organic N and P relative to C from the highest elevationsite (GL4) was somewhat surprising and points to either: (1) a source of dissolved organic material (DOM) in the upper reaches of the catchment that is enriched in these nutrients or (2) theselective uptake and processing of organic N and P downstream ofthe sampling site. Additionally, seasonal changes in the relativeimportance of DOM precursor materials appear to result in changesin the N content of DOM at both the GL4 and ALB sites.     

Hydrodechlorination/detoxification of PCDDs,PCDFs, and co-PCBs in fly ash by using calcium polysulfide

Dioxins like polychlorinated dibenzo-p-dioxins (PCSDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) are mainly emitted from waste incinerators (WIs) and have become an international research focus because of its serious concerns over the adverse health effects. The detoxification of PCCDs/Fs and PCBs is very difficult because of their stable chemical structure. A significant hydrodechlorination/detoxification of polychlorinated 1-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) were achieved in fly ash by using an aqueous mixture of calcium hydroxide and sulfur. Two different fly ashes were studied: originating from municipal waste incinerator (FA1) and industrial waste incinerator (FA2). They were heated with the aqueous mixture at 150 °C for 30 or 60 min with agitation. Higher decomposition (87%) and detoxification (87.7%) of PCDD/Fs and PCBs were achieved at 150 °C with two runs; every run was for 30 min, compared to one run for 60 min. FA2 gave higher decomposition and detoxification as compared to FA1, which might be due to higher metal content that played a catalytic role to decompose and detoxify the PCDDs, PCDFs and PCBs. The decomposition and detoxification of PCDFs in fly ash was higher than PCDDs and was augmented with increasing number of chlorides on aromatic compounds. As the highly significant decomposition and detoxification of higher concentration of PCDD/Fs and PCBs were achieved in 1 hour without additive catalyst and at low temperature of 150 °C, therefore, the developed method is cost effective and most suitable to apply on commercial/industrial level. The detail results of hydrodechlorination/detoxification of PCDD, PCDFs at different conditions are described and its mechanism is discussed.     

Dynamics of Bacterial Abundance,Biomass, Activity,and Community Composition in the Oligotrophic Traunsee and the Traun River (Austria)

The holomictic Traunsee is the deepest and second largest lakein Austria. The special characteristic of this ecosystem isthe fact that local salt and soda industries presumably alterthe lake by the discharge of waste materials. Since thebeginning of the 20th century salt and soda works areannually releasing up to 50,000 tons of solid wastes and up to150,000 tons of chloride into Traunsee. To assess potentialeffects of these anthropogenic impacts on the bacterioplanktonthree sampling sites, influenced as well as not influenced bythe industrial discharge, were chosen for comparison andsampled monthly from November 1997 to October 1998. Bacterialabundance ranged between 0.4 to 3.0 × 10⁶ cells ml^-1 with decreasing numbers along the depth profile. Theproportion of actively respiring bacteria, i.e. INT [2-(4-iodophenyl)-3-(4-nitrophenyl)-5-phenyltetrazolium chloride]reducing cells, never exceeded 10% of DAPI (4',6'-diamidino-2-phenylindole) stained cells. Fluorescence in situ hybridization (FISH) was used to examine the seasonal and spatial distribution of dominant phylogenetic groups of thebacterioplankton. Up to 84% of bacteria detected with DAPIcould be detected via FISH applying the universal bacterialprobe EUB338. Percentages of alpha- and beta-Proteobacteriaand members of the Cytophaga-Flavobacterium cluster did notexceed 60% of DAPI-stained cells.Beta-Proteobacteriaappeared to be the most abundant group, not only in Traunsee butalso in two reference lakes, Attersee and Hallstättersee. No significant differences in any of the bacterial parameters couldbe detected between the three sampling sites and all measurementswere found in the range reported for oligotrophic lakes. The highdischarge of the Traun River, resulting in a lake water renewaltime of only one year, may diminish possible effects of industrial waste discharge in the pelagic zone.     

Generation, storage, collection and transportation of municipal solid waste--a case study in the city of Kathmandu, capital of Nepal

Solid waste management (SWM) services have consistently failed to keep up with the vast amount of solid waste produced in urban areas. There is not currently an efficient system in place for the management, storage, collection, and transportation of solid waste. Kathmandu City, an important urban center of South Asia, is no exception. In Kathmandu Metropolitan City, solid waste generation is predicted to be 1091 m(3)/d (245 tons/day) and 1155 m(3)/d (260 tons/day) for the years 2005 and 2006, respectively. The majority (89%) of households in Kathmandu Metropolitan City are willing to segregate the organic and non-organic portions of their waste. Overall collection efficiency was 94% in 2003. An increase in waste collection occurred due to private sector involvement, the shutdown of the second transfer station near the airport due to local protest, a lack of funding to maintain trucks/equipment, a huge increase in plastic waste, and the willingness of people to separate their waste into separate bins. Despite a substantial increase in total expenditure, no additional investments were made to the existing development plan to introduce a modern disposal system due to insufficient funding. Due to the lack of a proper lining, raw solid waste from the existing dumping site comes in contact with river water directly, causing severe river contamination and deteriorating the quality of the water.     

The in situ treatment of BTEX,MTBE, and TBA in saline groundwater

A pilot‐scale test was conducted in a saline aquifer to determine if a petroleum hydrocarbon (PHC) plume containing benzene (B), toluene (T), ethylbenzene (E), xylenes (X), methyl tert‐butyl ether (MTBE), and tert‐butyl alcohol (TBA) could be treated effectively using a sequential treatment approach that employed in situ chemical oxidation (ISCO) and enhanced bioremediation (EBR). Chemical oxidants, such as persulfate, have been shown to be effective in reducing dissolved concentrations of BTEX (B + T + E + X) and additives such as MTBE and TBA in a variety of geochemical environments including saline aquifers. However, the lifespan of the oxidants in saline environments tends to be short‐lived (i.e., hours to days) with their effectiveness being limited by poor delivery, inefficient consumption by nontargeted species, and back‐diffusion processes. Similarly, the addition of electron acceptors has also been shown to be effective at reducing BTEX and associated additives in saline groundwater through EBR, however EBR can be limited by various factors similar to ISCO. To minimize the limitations of both approaches, a pilot test was carried out in a saline unconfined PHC‐impacted aquifer to evaluate the performance of an engineered, combined remedy that employed both approaches in a sequence. The PHC plume had total BTEX, MTBE, and TBA concentrations of up to 4,584; 55,182; and 1,880 μg/L, respectively. The pilot test involved injecting 13,826 L of unactivated persulfate solution (19.4 weight percent (wt.%) sodium persulfate (Na₂S₂O₈) solution into a series of injection wells installed within the PHC plume. Parameters monitored over a 700‐day period included BTEX, MTBE, TBA, sulfate, and sulfate isotope concentrations in the groundwater, and carbon and hydrogen isotopes in benzene and MTBE in the groundwater. The pilot test data indicated that the BTEX, MTBE, and TBA within the PHC plume were treated over time by both chemical oxidation and sulfate reduction. The injection of the unactivated persulfate resulted in short‐term decreases in the concentrations of the BTEX compounds, MTBE, and TBA. The mean total BTEX concentration from the three monitoring wells within the pilot‐test area decreased by up to 91%, whereas MTBE and TBA mean concentrations decreased by up to 39 and 58%, respectively, over the first 50 days postinjection in which detectable concentrations of persulfate remained in groundwater. Concentrations of the BTEX compounds, MTBE, and TBA rebounded at the Day 61 marker, which corresponded to no persulfate being detected in the groundwater. Subsequent monitoring of the groundwater revealed that the concentrations of BTEX continued to decrease with time suggesting that EBR was occurring within the plume. Between Days 51 and 487, BTEX concentrations decreased an additional 84% from the concentration measured on Day 61. Mean concentrations of MTBE showed a reduction during the EBR phase of remediation of 33% while the TBA concentration appeared to decrease initially but then increased as the sulfate concentration decreased as a result of MTBE degradation. Isotope analyses of dissolved sulfate (³⁴S and ¹⁸O), and compound‐specific isotope analysis (CSIA) of benzene and MTBE (¹³C and ²H) supported the conclusions that ISCO and EBR processes were occurring at different stages and locations within the plume over time.     

Organometals of tin, lead and mercury compounds in landfill gases and leachates from Bavaria, Germany

Organo-Sn, -Pb and -Hg compounds were monitored in gases and leachates of 11 municipal waste landfills and one hazardous waste landfill from Bavaria, Germany, with the objectives to estimate the methylation of Sn, Pb and Hg and to assess the risk of their release into the adjacent environment. In the gases, tetramethyl Sn predominated (>80% of total gaseous Sn) with concentrations up to 160mug Sn m(-3). Dimethyl-Hg and tetramethyl-Pb were only occasionally detected with concentrations up to 2.9 and 2.1mugm(-3) as Hg or Pb, respectively. In all leachates, trimethyl-Sn dominated with a maximum concentration of 2100ng Sn L(-1). No organo-Pb compounds were found, and monomethyl-Hg was detected in only one leachate. The concentrations of trimethyl-Sn were up to 100-fold higher in the condensate water than in leachates, and the concentrations of organo-Sn compounds were lower in the adjacent groundwater than in the corresponding leachates. The high abundance of methylated Sn species in the gases and leachates indicates Sn methylation, suggesting the landfill as a source for organo-Sn compounds. In comparison, methylation of Hg and Pb was of little importance, probably due to low Hg concentrations and low rates of Pb methylation in the landfill. The risks of organo-Sn compounds release to the adjacent air is low due to flaring of landfill gases. However, there is probable release of organo-Sn compounds, especially trimethyl-Sn, to the adjacent groundwater.     

Stabilization of As, Cr, Cu, Pb and Zn in soil using amendments--a review

The spread of contaminants in soil can be hindered by the soil stabilization technique. Contaminant immobilizing amendments decrease trace element leaching and their bioavailability by inducing various sorption processes: adsorption to mineral surfaces, formation of stable complexes with organic ligands, surface precipitation and ion exchange. Precipitation as salts and co-precipitation can also contribute to reducing contaminant mobility. The technique can be used in in situ and ex situ applications to reclaim and re-vegetate industrially devastated areas and mine-spoils, improve soil quality and reduce contaminant mobility by stabilizing agents and a beneficial use of industrial by-products. This study is an overview of data published during the last five years on the immobilization of one metalloid, As, and four heavy metals, Cr, Cu, Pb and Zn, in soils. The most extensively studied amendments for As immobilization are Fe containing materials. The immobilization of As occurs through adsorption on Fe oxides by replacing the surface hydroxyl groups with the As ions, as well as by the formation of amorphous Fe(III) arsenates and/or insoluble secondary oxidation minerals. Cr stabilization mainly deals with Cr reduction from its toxic and mobile hexavalent form Cr(VI) to stable in natural environments Cr(III). The reduction is accelerated in soil by the presence of organic matter and divalent iron. Clays, carbonates, phosphates and Fe oxides were the common amendments tested for Cu immobilization. The suggested mechanisms of Cu retention were precipitation of Cu carbonates and oxy-hydroxides, ion exchange and formation of ternary cation-anion complexes on the surface of Fe and Al oxy-hydroxides. Most of the studies on Pb stabilization were performed using various phosphorus-containing amendments, which reduce the Pb mobility by ionic exchange and precipitation of pyromorphite-type minerals. Zn can be successfully immobilized in soil by phosphorus amendments and clays.     

Correlations between homologue concentrations of PCDD/Fs and toxic equivalency values in laboratory-, package boiler-, and field-scale incinerators

The toxic equivalency (TEQ) values of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) are predicted with a model based on the homologue concentrations measured from a laboratory-scale reactor (124 data points), a package boiler (61 data points), and operating municipal waste incinerators (114 data points). Regardless of the three scales and types of equipment, the different temperature profiles, sampling emissions and/or solids (fly ash), and the various chemical and physical properties of the fuels, all the PCDF plots showed highly linear correlations (R(2)>0.99). The fitting lines of the reactor and the boiler data were almost linear with slope of unity, whereas the slope of the municipal waste incinerator data was 0.86, which is caused by higher predicted values for samples with high measured TEQ. The strong correlation also implies that each of the 10 toxic PCDF congeners has a constant concentration relative to its respective total homologue concentration despite a wide range of facility types and combustion conditions. The PCDD plots showed significant scatter and poor linearity, which implies that the relative concentration of PCDD TEQ congeners is more sensitive to variations in reaction conditions than that of the PCDF congeners.     

Residential recycling programs: Environmental,economic and disposal factors

The type of recycling program initiated by state or local government is related to (a) the environmental awareness of the population and the subsequent reflection of that awareness in government, (b) the state's municipal solid waste (MSW) disposal situation, and (c) the market conditions for recycled materials. Two hypotheses are studied: (1) voluntary participation recycling programs are initiated when environmental awareness is the driving force and market conditions are good and (2) mandatory participation recycling programs result when the driving force is MSW disposal difficulties.New Jersey and Oregon, two of the states, with statewide mandatory and voluntary recycling programs respectively, are studied with respect to the events leading to the enactment of their recycling programs. The hypotheses are supported by the events in each state. Hypothesis 2 is further supported by data from 48 states comparing information on each state's MSW disposal situation with the local and statewide recycling programs reported in a survey. The percentages of mandatory recycling programs increase with increasing MSW disposal difficulty. A measure of environmental awareness must be developed before hypothesis one can be studied with cross-sectional data.