Moisture Sorption Characteristics of Microbially Produced Polysaccharide and Polyvinyl Alcohol Blends

Moisture sorption characteristics of microbial polysaccharide (Ps.C101) from Pseudomonas caryophilli and polyvinyl alcohol (PVA) blends have been carried out at 27°C for water activity from 0.1 to 0.9. The sorption data was used to fit six different sorption isotherm models proposed in literature. The model constants were determined by linear fitting of the sorption equations. The ranges of applicability of water activity for isotherm models reported in this paper lie in between 0.1 and 0.4 for Brunaur–Emmet–Teller (BET) model (monolayer), and in between 0.2 and 0.9 for other models. The value of the coefficient of determination (R² = 0.97 ± 0.02) confirms the applicability of the equations studied.     

烟囱与吸收塔合一结构分析

通过手工计算和ANSYS有限元软件计算两种方法对安徽新源热电有限公司烟囱与吸收塔合一结构进行结构计算。分析了结构在风载荷、地震载荷作用下的应力和变形,比较了手工计算和有限元电算结果,可为类似工程的计算提供理论参考。     

Guest Comments: Human Activities and the Integrity of Lake Ecosystems

Water, Air, &; Soil Pollution: Focus -     

"先污染后治理"的成因及解决对策

分析了“先污染后治理”现象在我国规模发生的主要原因，提出了避免“先污染后治理”的对策，着重强调从微观入手，重点发展环保型技术、实现控污，治污技术内部化。     

Bioremediation of Dissolved and Free Phase Oil in Wastewater from Equipment Maintenance Activities

Land treatment facilities can provide effective treatment of secondary oily wastewater from maintenance operations, particularly in arid climates. Soil and underlying groundwater from a land treatment facility, which has been operating for eight years, were analyzed to determine the effectiveness of using bioremediation for the treatment of dissolved and free‐phase oil in maintenance wastewater. The study was conducted at a mining site in Western Australia. The facility was capable of treating 140 kiloliters (kL) of oily wastewater per day. The average petroleum hydrocarbon content of the wastewater was 2 percent weight per volume (w/v) based on data available for the first five years. The soil data indicate that the land treatment process has been operating efficiently even at high wastewater loadings with maximum degradation rates of 10–242 mg/kg per day. Based on the soil data, there is no evidence of accumulation of any metal or polycyclic aromatic hydrocarbon (PAH) compounds. The land treatment facility has led to only low levels of TPH (total petroleum hydrocarbons) contamination (<4 ppm) in the underlying groundwater. However, nitrate concentrations in the groundwater were shown to increase over the first five years of the facility's operation. This article reports and discusses the operational data from the land treatment process, illustrating its effectiveness in treating oily wastewater. © 2001 John Wiley & Sons, Inc.     

Characterization and Biotechnological Functional Activities of Exopolysaccharides Produced by Lysinibacillus fusiformis KMNTT-10

Journal of Polymers and the Environment - In this study, the production and physicochemical characterization of exopolysaccharide (EPS) produced by Lysinibacillus fusiformis KMNTT-10 were...     

Structural Features and Water Interactions of Etherified Xylan Thin Films

In this paper, the model film approach was used to investigate the structural features and humidity induced changes of the etherified xylan derivatives by using surface sensitive methods. Two routes to modify the birch xylan to generate either cross-linking xylan or more hydrophobic xylan were mastered via allylation and butylation, respectively. Thin nanometer scale model films were prepared by spin-coating and the films were further treated by UV-radical treatment and heat. The structural changes and wetting behaviour of the films before and after the post-treatment procedures were studied using atomic force microscopy and water contact angle measurements. In addition, the water vapour uptake of the xylan derivative films was monitored using quartz crystal microbalance with dissipation (QCM-D) equipped with the humidity module. With the QCM-D, the mass uptake due to the water vapour binding was defined. Simultaneously the changes in the viscoelastic properties of the films when subjected to different relative humidity conditions were determined. We show that the water sensitivity and wetting behaviour of the water soluble xylan derivatives can be altered by cross-linking the film structure and through the molecular rearrangements. Cross-linking and the conformational rearrangements of the allylated xylan reduced the water vapour uptake ability approximately 80?%. Butylated xylan as being a more hydrophobic derivative showed lower ability to uptake water vapour when compared to more hydrophilic xylan derivative. This ability was even further reduced after the post-treatments mainly due to the reassembly of the hydrophobic groups.     

Preparation and Characterization of Polyaniline and Ag/ Polyaniline Composite Nanoporous Particles and Their Antimicrobial Activities

Polyaniline (PANI) and Ag/PANI nanoporous composite were prepared by an oxidative polymerization method. The oxidation process of PANI nanoparticles was occurred using (NH₄)₂S₂O₈ while the oxidation process of Ag/PANI nanoporous composite was occurred using AgNO₃ under the effect of artificial radiation. The structural, morphological, and optical properties of the PANI and Ag/PANI nanoporous structures were studied using different characterization tools. The results confirm the formation of polycrystalline nanoporous PANI and spherical nanoporous composite of Ag/PANI particles. Antibacterial activity tests against gram-positive bacteria, Bacillus subtilis and Staphylococcus aureus, and gram-negative bacteria, Escherichia coli, and Salmonella species were carried out using different concentrations of PANI nanoparticles and Ag/PANI nanoporous composites. PANI has not antibacterial effect against all studied pathogens. In contrast, Ag/PANI nanoporous composites possessed antibacterial activity that is identified by the zone of inhibition. The inhibition zones of bacteria are in order; Salmonella species?>?S. aureus?>?B. subtilis?>?E. coli. The inhibition zones of all bacteria increased with increasing concentrations of Ag/PANI nanoporous composites from 200 to 400 ppm then decreased with further increasing of the dose concentrations to 600 ppm. Finally, a simplified mechanism based on the electrostatic attraction is presented to describe the antimicrobial activity of Ag/PANI nanoporous composite.     

Correlating pH and Swelling Degree Parameters to Understand the Sorption and Desorption Process of Diquat Herbicide from Nanocomposites Based on Polysaccharide and Clinoptilolite

Journal of Polymers and the Environment - Zeolite-based nanocomposites have become an efficient option for application in herbicide removal and controlled release systems. Our group previously...     

堇青石负载Pd和过渡金属氧化物催化剂的表征及其对CO的催化氧化活性

以堇青石蜂窝陶瓷(CC)为载体,采用浸渍法制备了堇青石负载Pd和过渡金属混合氧化物催化剂,记作Pd-M-Mn(M=Cu,Co,Fe,Ni)/CC。实验结果表明:Pd-Co-Mn/CC催化剂的催化活性最高;随着Pd负载量的增加,CO转化率提高;当Pd负载量为1.00%时,反应温度为150℃时CO转化率达到98%,200℃时CO转化率达到100%;在反应温度150℃条件下,Pd-Co-Mn/CC催化剂(Pd负载量1.00%)的CO转化率在前30h内小幅度下降,随后稳定在90%以上,反应100h后,催化剂表面颜色由黑色变为棕褐色。     

Monitoring of the Degradation Activities and the Diversity of the Microbial Community Degrading Refinery Waste Sludge

The biodegradation of n-alkanes and branched alkanes from waste sludge were observed in landfarming soils of Motor Oil Hellas (a petroleum refinery) and changes in the bacterial communities in the soils were monitored during the remediation. Bacterial 16S rRNA gene (rDNA)-based community fingerprint patterns were obtained from soil samples by terminal restriction fragment length polymorphism (T-RFLP) analysis. Changes in T-RFLP fingerprints, as well as in the petroleum contaminant composition of the polluted soil, correlated with degradation activities in field tests.     

Structural and Thermal Properties of Starch Plasticized with Glycerol/Urea Mixture

Journal of Polymers and the Environment - The paper presents the results of research on the influence of used plasticizing system on the structural and thermal properties of thermoplastic starch...     

Composition and Toxicity of Residual Bunker C Fuel Oil in Intertidal Sediments After 30 Years

In 1970, approximately 2000 m³ of Bunker C crude oil impacted 300 km of Nova Scotia’s coastline following the grounding of the tanker Arrow. Only 10% of the contaminated coast was subjected to cleanup, the remainder was left to cleanse naturally. To determine the long-term environmental impact of residual oil from this spill event, samples of sediment and interstitial water were recovered in 1993, 1997 and 2000 from a sheltered lagoon in Black Duck Cove. This heavily oiled site was intentionally left to recover on its own. Visual observations and chemical analysis confirmed that substantial quantities of the weathered cargo oil were still present within the sediments at this site. However, direct observations of benthic invertebrate abundance suggest that natural processes have reduced the impacts of the residual oil. To confirm this hypothesis, sediment and interstitial water samples from Black Duck Cove were assessed with a comprehensive set of biotests and chemical assays.Residual oil in the sediments had limited effect on hepatic CYP1A protein levels and mixed function oxygenase (MFO) induction in winter flounder (Pleuronectes americanus). No toxicity was detected with the Microtox solid phase test (Vibrio fischeri). Significant sediment toxicity was detected by the amphipod survival test (Eohaustorius estuarius) in four out of the eight contaminated sediments. Interstitial water samples were deemed non-toxic by the Microtox 100% test (Vibrio fischeri) and the echinoid fertilization test (Lytechinus pictus). Sediment elutriates were also found to be non-toxic in the grass shrimp embryo-larval toxicity (GSELTOX) test (Palaemonetes pugio).Recovery at this contaminated site is attributed to natural processes that mediated biodegradation and physical removal of oil from the sediments. In support of the latter mechanism, mineralization experiments showed that all test sediments had the capacity for hexadecane, octacosane and naphthalene degradation, while chemical analysis confirmed that the Bunker C oil from the Arrow had undergone substantial biodegradation.     

Antioxidant and Cytotoxic Activities of Exopolysaccharides from Alcaligenes faecalis Species Isolated from the Marine Environment of Mauritius

Journal of Polymers and the Environment - Extracellular polysaccharides (EPS) of microbial origin are polymers with great potential for research and industrial applications. In this study, a...     

绿色建筑供应链主导企业结构模型与运行实践分析

建筑可持续发展涉及多主体全过程,实施有效途径是构建绿色建筑供应链,基于绿色供应链理念构建绿色建筑供应链结构模型,分析绿色建筑供应链特点,界定绿色建筑供应链协调运行的主体职责,架构绿色建筑供应链主导企业及其基于主导企业驱动的绿色建筑供应链结构模型,剖析绿色建筑供应链运行实践问题,提出基于主导企业驱动的绿色建筑供应链协调运行的内在要求。     

Organically Modified Nanoclay and Aluminum Hydroxide Incorporated Bionanocomposites towards Enhancement of Physico-mechanical and Thermal Properties of Lignocellulosic Structural Reinforcement

A range of bio-nanocomposites were prepared by incorporation of organo modified montmorillonite nanoclay (OMMT) with or without use of aluminum hydroxide (Al(OH)₃) within polylactic acid (PLA) solution. Furthermore, the solution was employed for modification of ligno-cellulosic (jute) fabric structural reinforcements. The successful incorporation of nanofillers within the host polymer, polylactic acid (PLA) was confirmed by Fourier-transform infrared spectroscopy (FT-IR). Water uptake and swelling behaviour studies revealed that the water uptake and swelling ratio of bio-composites reduced significantly as compared to pristine jute fabric, whereas upon incorporation of OMMT and Al(OH)₃, the water barrier properties reduced even further in the developed bio-nanocomposites. The flexural strength of the bio-nanocomposites also showed improved mechanical and dimensional stability. Synergistic effects of OMMT and Al(OH)₃ were observed in enhancing the aforementioned physico-mechanical properties. Scanning electron microscopy (SEM) studies revealed microstructural details of developed samples. Similarly, the thermo-gravimetric analysis and linear burning rate studies of Al(OH)₃ treated bio-nanocomposite materials revealed enhanced thermal resistance and reduced flammability respectively compared to both pristine woven jute fabric and fabrics treated with PLA alone or those without Al(OH)₃. From the above results it can safely be said that the bio-nanocomposite material can be a prospective candidate for development of flame retardant biopackaging.     

Changes in Extractability of Cr and Pb in a Polycontaminated Soil After Bioaugmentation With Microbial Producers of Biosurfactants, Organic Acids and Siderophores

Partly because of the low bioavailability of metals, the soil cleaning-up using phytoremediation is usually time-consuming. In order to enhance the amount of metals at the plant's disposal, the soil bioaugmentation coupled together with phytoextraction is an emerging technology. In this preliminary work, two agricultural soils which mainly differed in their Cr, Hg and Pb contents (LC, low-contaminated soil; HC, high-contaminated soil) were bioaugmented in laboratory conditions by either bacterial (Bacillus subtilis, Pseudomonas aeruginosa, Pseudomonas fluorescens or Ralstonia metallidurans) or fungal inocula (Aspergillus niger or Penicillium simplicissimum) and incubated during three weeks. The LC soil pots bioaugmented with A. niger and P. aeruginosa contained higher concentrations of Cr (0.08 and 0.25 mg.kg⁻¹ dw soil) and Pb (0.25 and 0.3 mg.kg⁻¹ dw soil) in the exchangeable fraction F1 (extraction with MgCl₂) by comparison with the non-bioaugmented soil where neither Cr nor Pb was detected. Conversely, immobilization of Cr and Pb in the soil were observed with the other microorganisms. The soil bioaugmentation not only modified the metal speciation for the most easily extractable fractions but also modified the distribution of metals in the other fractions, to a lesser extent nevertheless. The difference in microbial concentrations between the bioaugmented or not HC soils reached up to 1.8 log units. Thus the microorganisms that we chose for the soil bioaugmentation were competitive towards the indigenous microflora. The PCA analysis showed close positive relationships between the microorganisms which potentially produced siderophores in the soil and the amount of Cr and Pb in the fraction F1.     

Chemical Changes in Sediment Pore-Waters of an Acidic Mining Lake After Addition of Organic Substrate and Lime for Stimulating Lake Remediation

In the past five years, enclosures have beeninstalled in an acidic mining lake in Lusatia to investigate insitu remediation processes. They were treated with straw, withstraw and Carbokalk, or with Carbokalk alone, where Carbokalkis a by-product of the sugar industry (solid precipitate ofnon-sugars after lime clarification of extracted sugar beetjuice). Sediment samples were taken as cores to get informationabout the behaviour of organic and inorganic components insediment pore-water with depth. Vertical distributions of pH,soluble reactive phosphate, nitrate, ammonium, silica,aluminium, iron, manganese, calcium, magnesium, sodium,potassium, sulphate, and DOC were measured. The resultingprofiles, each consisting of 15 data points at differentdepths, were compared by cluster analysis. The similarities ofsediment cores from different treated enclosures relating toprofiles of chemical components were discussed. Increasedconcentrations of potassium and sulphate were found in pore-water after substrate treatment. The data imply dissolution ofpotassium iron sulphate hydroxide minerals (jarosite) after anincrease of pH caused by dissolution of lime and by sulphatereducing processes which were stimulated by organic substrateaddition.     

Structural and Thermal Characteristics of Novel Organosolv Lignins Extracted from Thai Biomass Residues: A Guide for Processing

Journal of Polymers and the Environment - This work was the first to reveal structural and thermal characteristics of biomass lignins obtained from Thai agricultural residues; bagasse (BG),...     

Enzyme-Assisted Extraction and Pb<Superscript>2+</Superscript> Biosorption of Polysaccharide from <Emphasis Type="Italic">Cordyceps militaris</Emphasis>

The enzyme assisted extraction conditions of polysaccharide from Cordyceps militaris mycelia were firstly investigated by kinetics analysis and the optimal operating was found to be: extraction temperature 40 °C; solid-solvent ratio 1:20; extraction pH 4.0; cellulase concentration 2.0%. The polysaccharide extraction yield was 5.99% under these optimized conditions. Furthermore, a fundamental investigation of the biosorption of Pb²⁺ from aqueous solution by the C. militaris polysaccharide was performed under batch conditions. The suitable pH (5.0), polysaccharide concentration (0.20 g L^?1), initial Pb²⁺ concentration (300 mg L^?1) and contact time (40 min) were outlined to enhance Pb²⁺ biosorption from aqueous medium. The Langmuir isotherm model and pseudo first order kinetic model fitted well to the data of Pb²⁺ biosorption, suggesting the biosorption of Pb²⁺ onto C. militaris polysaccharide was monolayer biosorption and physical adsorption might be the rate-limiting step that controlled the adsorption process. FTIR analysis showed that the main functional groups of C. militaris polysaccharide involved in adsorption process were carbonyl, carboxyl, and hydroxyl groups.