Development of Composite Thin-Film Nanofiltration Membranes Based on Polyethersulfone for Water Purification

Journal of Polymers and the Environment - The development of thin-film composite membranes has gained more importance as they exhibit higher permeability, higher solute rejection and improved...     

Preparation and Characterization of Polyamide Thin Film Composite Nanofiltration Membrane Based on Polyurethane Nanofibrous Support

Journal of Polymers and the Environment - Polyurethane nanofibers recognized to perform as a sub-layer were employed herein as a medial-layer of high porosity in the fabrication of a novel class of...     

Crosslinked Polyacrylamide Composite Hydrogels Impregnated with Fly Ash: Synthesis,Characterization and Their Application as Fractures Sealant for High Water Producing Zones in Oil and Gas Wells

Polymeric hydrogels are designed to serve many purposes in various fields of human endeavor. Herein, crosslinked polyacrylamide (PAM) composite hydrogels impregnated with coal fly ash (CFA) were synthesized, characterized and tested as fracture sealing agents in high water producing permeable zones in petroleum industry. The concept of utilizing CFA as an inorganic additive in the matrix of hydrogel emanates from the fact that CFA constitutes majorly alumina and silica. Both chemical oxides can induce the CFA to promote the inherent properties of hydrogel. Polyethyleneimine (PEI) was chosen as the crosslinking agent. Neat PAM/PEI hydrogel and PAM/PEI–CFA hydrogels at various CFA loadings (0.5, 1 and 2 wt%) were synthesized via a transamidation reaction pathway. The developed hydrogels were characterized by hybrid rheometer, FTIR, SEM and XRD instruments. Rheological results reveal that the PAM/PEI–CFA composite hydrogels embedded with various CFA quantities were more elastic than the neat PAM/PEI hydrogel, indicating the dispersion and reinforcing effect of CFA. The functional groups of these hydrogels were confirmed by the FTIR while SEM analysis show that the surface micrographs of neat PAM/PEI hydrogel and PAM/PEI–CFA1 hydrogel were porous in several regions. In contrast, the micrographs of PAM/PEI–CFA2 and PAM/PEI–CFA3 hydrogels demonstrated dense and “net-like” structural patterns. Further, XRD analysis revealed that CFA impregnation has a significant effect on the bulk structural properties of the fabricated hydrogels. The swelling rates of these hydrogels were determined by the gravimetric method and their diffusion parameters evaluated using Fickian diffusion and Schott-order kinetic models. Efficacy of the PAM/PEI–CFA composite hydrogel as fractures sealant in oil and gas wells was conducted at a typical reservoir temperature, 90 °C, and the outcome demonstrated considerable sealing potency.     

膜技术在水处理中的应用及膜材料研究进展

综述了膜技术在给水处理、废水处理和特殊行业水处理中的应用,介绍了近年来膜材料的研究进展：包括开发新型的膜材料和对现有的膜材料进行改性。新型膜材料有金属膜、有机一无机混合膜和新型有机膜等;几种最常用的膜材料改性方法有等离子体改性法、表现活性剂改性法、紫外辐照法、高分子合金法和表面化学反应法。     

Synthesis and Characterization of Chitosan-Grafted-Poly(2-Hydroxyaniline) Microstructures for Water Decontamination

Chitosan as a biopolymer, biodegradable, safe, non-toxic and widely abundant in nature was grafted with poly(2-hydroxyaniline) (P2-HA) through aqueous chemical oxidative copolymerization using ammonium persulphate in acetic acid medium. The grafting conditions were studied by varying grafting parameters. The effect of oxidant, 2-hydroxyaniline (2-HA) and acetic acid concentrations on the rate of copolymerization was studied. The synthesized graft characterized using UV–Vis, FTIR, TGA, XRD, and scanning electron microscope and compared with chitosan and P2-HA. The grafting enhances the thermal properties of chitosan. The effect of temperature on the rate of grafting copolymerization reaction was studied. The apparent activation energy (Ea) of the copolymerization reaction found to be 21.1116 kJ/mol. Also, ΔH^* and ΔS^*, were calculated and found to 22.8630 kJ/mol and ?109.4290 J/mol K respectively. The mechanism of the grafting copolymerization reaction discussed. Chitosan, P2-HA and chitosan-graft-P2-HA used for the removal of Cr, Fe, Mn, Cu and Zn divalent ions from a contaminated water samples. The adsorption isotherm parameters are given.     

3M测试片法在膜法水处理技术中的应用

采用3M测试片法测定膜法水处理系统的细菌总数,找出双膜系统的微生物污染环节,并采用正交实验筛选出适宜的杀菌剂种类、杀菌剂加入量和杀菌时间。实验结果表明：3M测试片法的测定结果数据准确可靠,且操作简便,节省时间,可以替代常规的平皿培养法用于评价膜的微生物污染情况;某炼化公司双膜系统的反渗透膜已受到微生物的污染,确定的适宜杀菌条件为杀菌剂Trsea 380、杀菌剂加入量50 mg/L、杀菌时间2.0 h,在此条件下杀菌率可达100%。     

Utilization of Cellulosic Wastes in Textile and Garment Industries: 2. Synthesis and Characterization of Cellulose Acetate from Knitted Rag

Cellulose acetate (CA) was synthesized from knitted rag, a cellulosic waste of Textile and Garment industries, in the glacial acetic acid, and subsequently acetic anhydride (Ac₂O) in presence of concentrated H₂SO₄ reaction medium. A low to high substitution products were obtained from single step up to seven steps acetylation of cellulose. In this way, it was possible to produce low cost and different grades or substituted acetylation derivatives of cellulose. The synthesized CA was characterized and investigation of its physical characteristics was done. Solubility, acetyl content, acetic acid content, degree of substitution, and molecular weight of CA increased gradually with the increase of the number of reaction steps attaining optimum value at the fourth step. The acetyl and acetic acid content of CA were increased from 39.95 % to 44.25 %, and from 55.73 % to 61.73 % respectively. Similarly, degree of substitution and molecular weight of CA were increased from 2.47 to 2.94, and from 74,249 to 121,437 respectively.     

双氰胺-甲醛聚合物-聚合氯化铝复合絮凝剂的合成及应用

以双氰胺、甲醛、氯化铝为主要原料,加入添加剂合成了双氰胺-甲醛聚合物（DF）-聚合氯化铝（PAC）复合絮凝剂。采用模拟印染废水考察了各种因素对DF—PAC复合絮凝剂混凝脱色性能的影响。实验结果表明,在双氰胺、甲醛、氯化铝、添加剂加入量分别为29．1,57．8,4．8,12．5g,反应温度（70±1）℃、反应时间2．5h的条件下制得的DF—PAC复合絮凝剂的絮凝脱色性能良好,COD去除率不小于90％,色度去除率不小于99％。与PAC和DF絮凝剂相比,DF—PAC复合絮凝剂对实际印染废水的絮凝脱色效果更好。     

复合混凝剂CAF的研制与净水效果试验

以天然物质甲壳素制备壳聚糖,并用壳聚糖、聚合铝和三氯化铁制成了复合混凝剂ＣＡＦ。详细介绍了制备甲壳素、壳聚糖、ＣＡＦ的工艺流程和最佳工艺参数,试验结果表明,ＣＡＦ的净水效果明显优于无机混凝剂聚合铝和三氯化铁。     

Synthesis of Polyurethane and Characterization of its Composites Based on Alfa Cellulose Fibers

Polyurethane (PU) based on polycaprolactone (PCL) and 4,4′ diphenyl methylene diisocyanate (MDI) was synthesized using a two-step method. The PU obtained was then blended with various amounts of cellulose extracted from alfa stems to prepare composite materials. The influence of cellulose on the thermal and mechanical properties of different composites was demonstrated by means of several characterization techniques such as Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM)…     

Synthesis of Polymeric Matrices for Adsorption and Purification of Endoglucanase

Chitosan (CHS), chitosan–Eudragit® EPO (CHS–EPO) and chitosan beads partially cross-linked with glutaraldehyde (CHS–GLUT) were obtained in order to improve the adsorption selectivity of endoglucanase from a fungal culture obtained under SSF by Aspergillus niger using soybean harvest residues as support. The matrices synthetized were characterized in terms of physical and chemical changes. Fourier-transformed infrared spectroscopy with attenuated total reflectance device (FTIR-ATR) was employed to verify the chemical changes on the CHS matrix after the synthesis of CHS–GLUT and CHS–EPO. Scanning electron microscopy (SEM) was performed to compare the surface morphology of the polymeric beads. Two variables, purification factor and yield percentage of the adsorption process, were analyzed using a bifactorial ANOVA considering the matrix–time first order interaction. SEM results exhibited greater surface roughness in the CHS–GLUT and CHS–EPO matrices which may enhance endoglucanase adsorption. FTIR-ATR results confirmed an effective chemical modification of the CHS matrix after crosslinking with GLUT and corroborated the efficiency of the synthesis of the CHS–EPO matrix by the presence of chemical groups of the EPO polymer. An endoglucanase purification factor close to 9 was achieved with the CHS–GLUT matrix and a yield percentage of 60% was obtained with the CHS–EPO matrix. Bifactorial ANOVA results showed the matrix–time interaction to be significant for both variables. The CHS–GLUT matrix with low crosslinking times and the novel CHS–EPO matrix could be included in the bioseparation stage of endoglucanase using a simple and a low-cost method such as batch adsorption.     

Synthesis and Characterization of Dual-ion-Crosslinked Magnetic Sodium Alginate-Based Fe-SA-Y@Fe3O4 Biogel Composite with Ultrastrong Performance for Azo Dye Removal

Journal of Polymers and the Environment - Magnetic sodium alginate(SA)-based biogel composite Fe-SA-Y@Fe3O4 macroparticles were synthesized by co-crosslinking of Y(III) and Fe(III) ions according...     

Thermal and FT-IR Characterization of Gigantochloa levis and Gigantochloa scortechinii Bamboo, a Naturally Occurring Polymeric Composite

This research presents, thermal (TGA, Kinetics, DSC) analysis and FT-IR characterization of two bamboo species viz. Gigantochloa levis and Gigantochloa scortechinii at different position and locations (Internode and node). The internodes and nodes of Gigantochloa levis and Gigantochloa scortechinii exhibited similar thermal stability, observed up to 200 °C. The decomposition of cellulose and hemicelluloses component of the bamboo species occurred between 220 and 390 °C, while the degradation of lignin was observed above 400 °C. The kinetic studies revealed that Gigantochloa levis is more sensitive to degradation as compared to Gigantochloa scortechinii. The FT-IR studies were carried to assign the functional groups available at different positions and locations.     

Synthesis,Characterization, and Evaluation of Degussa P25/Chitosan Composites for the Photocatalytic Removal of Sertraline and Acid Red 18 from Water

Journal of Polymers and the Environment - Degussa P25 titanium dioxide/chitosan composites (P25/CS) were prepared using three different methods and two different chitosan materials. The obtained...     

Controlled Release 7-Methoxytacrine-Polycaprolactone Nanocapsules Drug-Delivery System for Alzheimer's Disease Treatment: Synthesis and Physico-Chemical Characterization

Journal of Polymers and the Environment - Alzheimer’s disease is the most prevalent cause of dementia in aging people. 7-Methoxytacrine (7-MEOTA) is one of the approved drugs for the...     

海藻酸钠-聚乙烯醇-聚乙二醇复合膜的制备及其对Cu2+的吸附

采用聚乙烯醇（PVA）、聚乙二醇（PEG）对海藻酸钠（SA）进行改性,制备了一种新型高效SA-PVA-PEG复合膜。研究了该复合膜对Cu²⁺的吸附效果。用IR和SEM等手段对复合膜进行了表征。表征结果显示,复合膜内部存在孔状结构,有利于吸附Cu²⁺。实验结果表明：在初始Cu²⁺质量浓度50 mg/L、复合膜加入量1 g/L、废水pH=5、吸附温度30 ℃、吸附时间60 min的最佳条件下,吸附率最高可达90.1%,吸附量达25.3 mg/g;复合膜吸附Cu²⁺的动力学过程可用二级动力学方程和Elovice方程进行拟合,吸附过程符合Langmuir单层吸附理论。采用浓度为1 mol/L的HCl溶液对吸附后的复合膜进行解吸,当解吸时间为2 min时,解吸率可达80.0%。     

Synthesis and Characterization of Novel Ionochromic Tricyanofuran-Based Phenothiazine Fluorophore: Cellulose-Based Xerogel for Colorimetric Detection of Toxic Cyanides

Journal of Polymers and the Environment - Novel phenothiazine fluorophore containing two tricyanofuran-vinyl groups [tricyanofuran(TCF)-bearing phenothiazine(P); TCFP] as cyanide anion receptors...