Industrial waste management simulation game and its educational effect

The purposes of this study were to develop the Industrial Waste Game and to examine the validity of this game as a tool for environmental education. The aim of this game is to enable players to understand the social dilemma between individual interest of hazardous dumping and the social cost of purifying pollution, and to find a solution to the social dilemma by providing the monitoring and sanction system for illegal dumping or other efficient systems. The game was played by 213 undergraduate students who were divided into 40 groups of 5 to 6 people. One of 4 combinations of monitoring and penalty conditions was assigned to each group. The players were asked to answer questionnaires concerning their interests and understanding of the industrial waste issue before and after the game to evaluate educational effects. The results indicated that the players increased their awareness of industrial waste problems and came to understand that these problems were caused not by psychological factors such as immorality of the illegal dumper but mainly by social structural factors like the social dilemma. Through playing the game and participating in post-game discussion, players were able to obtain interesting experience and gain motivation to learn more.     

Leaching behaviour of synthetic aggregates

In the framework of EU project "Utilising innovative kiln technology to recycle waste into synthetic aggregate" (BRST-CT98-5234), the leaching behaviour of synthetic aggregates has been studied to assess its environmental compatibility in the various stages of its use. Since the conditions are very different for the different uses, the assessment calls for a variety of different leaching conditions. The pH dependence test is used to cover important differences in pH environment to which the materials are exposed to as well as for an assessment of the buffering capacity of the material. Synthetic aggregate features a low buffer capacity, which makes it sensitive to externally imposed pH conditions. Utilisation and storage exposed to acidic conditions needs to be avoided. The results of the pH dependence test and column leaching test are mutually consistent. The CEN TC 154 method appears to provide systematically low values due to the arbitrary selection of test conditions. Synthetic aggregate studied to date will not adversely affect the concrete in its service life. The main issue for aggregate use is the recycling and the "end of life" condition, when the material becomes construction debris. Not metals, but oxyanions, such as Cr VI and Mo are most relevant under these conditions. A concise test has been applied to assess crucial aspects of leaching for different production mixes.     

协同创新视角下资环专业研究生科技创新能力提升途径

资源循环科学与工程专业硕士毕业生存在规模小、科技创新能力不足、能力施展受限等问题,无法满足产业对高层次人才的需求。究其原因有:(1)新兴专业,其研究生导师队伍建设不健全,人才培养质量参差不齐;(2)交叉专业,其科技创新能力培养方向尚需融合凝练;(3)综合专业,其现有科研平台还不足以支撑学科发展,科技创新能力培养模式还没有完全形成。因此,本学科研究生培养单位应树立协同创新理念,坚持行业需求导向,充分挖掘办学特色和优势,凝练培养方向、完善以科技创新能力培养核心的研究生培养方案;加强师资队伍建设,建立健全科研平台;支持鼓励科技创新实践活动,做好学科前沿追踪;加强校校交流互动,提升硕士点认可度。     

Low intervention soil remediation approaches

Traditional bioremediation approaches have been used to treat petroleum source contamination in readily accessible soils and sludges. Contamination under existing structures is a greater challenge. Options to deal with this problem have usually been in the extreme (i.e., to dismantle the facility and excavate to an acceptable regulated residual, or to pump and treat for an inordinately long period of time). The excavated material must be further remediated and cleanfill must be added to close the excavation. If site assessments were too conservative or incomplete, new contamination adulterating fill soils may result in additional excavation at some later date. Innovative, cost-efficient technologies must be developed to remove preexisting wastes under structures and to reduce future remediation episodes. An innovative soil bioremediation treatment method was developed and evaluated in petroleum hydrocarbon contaminated (PHC) soils at compressor stations of a natural gas pipeline running through Louisiana. The in-situ protocol was developed for remediating significant acreage subjected to contamination by petroleum-based lubricants and other PHC products resulting from a chronic leakage of lubricating oil used to maintain the pipeline itself. Initial total petroleum hydrocarbon (TPH) measurements revealed values of up to 12,000 mg/kg soil dry weight. The aim of the remediation project was to reduce TPH concentration in the contaminated soils to a level of <200 mg/kg soil dry weight, a level negotiated to be acceptable to state and federal regulators. After monitoring the system for 122 days, all sites showed greater than 99-percent reduction in TPH concentration.     

Biodegradation of Slow-Release Fertilizers (Methyleneureas) in Soil

The biodegradation of urea and condensation products thereof (ureaforms or methyleneureas), their nitrification, and their influence on the respiratory rate of soil was studied over periods of up to 100 days. The total methyleneurea content of the soil was determined after its acidic extraction, using a convenient colorimetric assay, and an HPLC protocol was established to analyze for specific components of methyleneureas. Urea, unfractionated methyleneureas, and hot-water soluble methyleneureas were rapidly metabolized to ammonium, which accumulated to high concentrations and was consequently oxidized to nitrate; an accumulation of nitrite was observed during urea but not during methyleneurea degradation. Hot water-insoluble methyleneureas were degraded much more slowly, and ammonium formed from these compounds was oxidized to nitrate without being released in significant amounts. These results suggest that the use of methyleneureas of optimized composition with regard to their water solubility may help to resolve problems such as the toxicity of ammonia to plant growth as well as nitrogen loss by leaching of nitrate, denitrification and volatilization.     

Optimization of separation and logistics for recycling materials from wallpaper hanging sites

It is of huge importance for sustainability to find a pragmatic solution for recycling of a variety of wastes emitted in small mass such as the case of wallpaper replacements. A combination of two-step sorting scheme and transportation of the wastes in collaboration with the wholesalers was proposed to enhance the efficiency of recycling. The two-step sorting consists of the first sorting at the wallpaper hanging sites to separate and group wastes in a way to avoid heavy additional burden on the hanging job. Secondary sorting is conducted at a Sorting Center to re-group wastes to send to an intermediate processing company for recycling. To minimize the costs for transportation, the grouped wastes emitted at the hanging sites are brought back by the hangers and kept temporally and then moved to the wholesaler(s) on the way to receive new materials. When the wastes at the wholesaler(s) become sufficiently large for economic transportation, a truck is arranged to collect the wastes to transport them to the Sorting Center. A feasibility study to test the practicality of the method confirmed that it could be operable and the cost would be comparable or lower than that currently incurred for disposal of the wastes.     

A Cumulative Energy Demand indicator (CED), life cycle based,for industrial waste management decision making

Life cycle thinking is a good approach to be used for environmental decision-support, although the complexity of the Life Cycle Assessment (LCA) studies sometimes prevents their wide use. The purpose of this paper is to show how LCA methodology can be simplified to be more useful for certain applications.In order to improve waste management in Catalonia (Spain), a Cumulative Energy Demand indicator (LCA-based) has been used to obtain four mathematical models to help the government in the decision of preventing or allowing a specific waste from going out of the borders. The conceptual equations and all the subsequent developments and assumptions made to obtain the simplified models are presented.One of the four models is discussed in detail, presenting the final simplified equation to be subsequently used by the government in decision making.The resulting model has been found to be scientifically robust, simple to implement and, above all, fulfilling its purpose: the limitation of waste transport out of Catalonia unless the waste recovery operations are significantly better and justify this transport.     

Management status of end-of-life vehicles and characteristics of automobile shredder residues in Korea

An end-of-life vehicle (ELV) is dismantled to recover and recycle any re-usable parts, then shipped to the shredding facility for further recovery of iron with any remaining Automobile Shredder Residue (ASR) to be considered as wastes and to be disposed of by either thermal treatment or landfill. Overall ELVs management status in Korea, including recycling resulting from the dismantling processes, was surveyed using some questionnaires given to dismantlers and other available information to provide some feasible means for future treatment. The averaged recycle rate in the dismantling stage showed a value of 44% and the rest of an ELV was then compressed and transported to shredding companies to recover mainly the iron content which averaged 38.7% of the mass of a new vehicle. The non-ferrous metals such as copper, antimony, zinc and aluminum accounted for only 1.5%. The Shredder dusts (SDs) were found to be composed of light and heavy fluffs and soil/dust and amounted to 15.8% based on the mass of a new vehicle. Dumping of fluff and inorganic residues into a landfill site, however, will be restricted when new regulations are implemented to reduce the disposal amount to less than 5% of a new car as done in European countries and Japan. The detailed characteristics of SDs were investigated to provide an idea of how to treat them in order to meet a future expected enforcement.     

Determination of renewable energy yield from mixed waste material from the use of novel image analysis methods

Two novel techniques are presented in this study which together aim to provide a system able to determine the renewable energy potential of mixed waste materials. An image analysis tool was applied to two waste samples prepared using known quantities of source-segregated recyclable materials. The technique was used to determine the composition of the wastes, where through the use of waste component properties the biogenic content of the samples was calculated. The percentage renewable energy determined by image analysis for each sample was accurate to within 5% of the actual values calculated. Microwave-based multiple-point imaging (AutoHarvest) was used to demonstrate the ability of such a technique to determine the moisture content of mixed samples. This proof-of-concept experiment was shown to produce moisture measurement accurate to within 10%. Overall, the image analysis tool was able to determine the renewable energy potential of the mixed samples, and the AutoHarvest should enable the net calorific value calculations through the provision of moisture content measurements. The proposed system is suitable for combustion facilities, and enables the operator to understand the renewable energy potential of the waste prior to combustion.     

Accounting for Climate Change: Introduction

The assessment of greenhouse gases (GHGs) emitted to and removed from the atmosphere is high on both political and scientific agendas internationally. As increasing international concern and cooperation aim at policy-oriented solutions to the climate change problem, several issues have begun to arise regarding verification and compliance under both proposed and legislated schemes meant to reduce the human-induced global climate impact. The approaches to addressing uncertainty introduced in this article attempt to improve national inventories or to provide a basis for the standardization of inventory estimates to enable comparison of emissions and emission changes across countries. Authors of the accompanying articles use detailed uncertainty analyses to enforce the current structure of the emission trading system and attempt to internalize high levels of uncertainty by tailoring the emissions trading market rules. Assessment of uncertainty can help improve inventories and manage risk. Through recognizing the importance of, identifying and quantifying uncertainties, great strides can be made in the process of Accounting for Climate Change.     

Landfill reduction experience in The Netherlands

Modern waste legislation aims at resource efficiency and landfill reduction. This paper analyses more than 20 years of landfill reduction in the Netherlands. The combination of landfill regulations, landfill tax and landfill bans resulted in the desired landfill reduction, but also had negative effects. A fierce competition developed over the remaining waste to be landfilled. In 2013 the Dutch landfill industry generated €40 million of annual revenue, had €58 million annual costs and therefore incurred an annual loss of €18 million. It is not an attractive option to prematurely end business. There is a risk that Dutch landfill operators will not be able to fulfil the financial obligations for closure and aftercare. Contrary to the polluter pays principle the burden may end up with society. EU regulations prohibiting export of waste for disposal are in place. Strong differentials in landfill tax rate between nations have nevertheless resulted in transboundary shipment of waste and in non-compliance with the self-sufficiency and proximity principles. During the transformation from a disposal society to a recycling society, it is important to carefully plan required capacity and to guide the reorganisation of the landfill sector. At some point, it is no longer profitable to provide landfill services. It may be necessary for public organisations or the state to take responsibility for the continued operation of a ‘safety net’ in waste management. Regulations have created a financial incentive to pass on the burden of monitoring and controlling the impact of waste to future generations. To prevent this, it is necessary to revise regulations on aftercare and create incentives to actively stabilise landfills.     

Remote sensing systems considerations and user requirements for oil spill surveillance

New communications technology coupled with using GIS and GPS technology gives an opportunity to bridge the gap from the sensor-equipped aircraft to the user of the information. Finally, remote sensing information can be delivered in a form that is tailored to the needs of the end user. The challenge today is to keep to simple systems that make sense operationally rather than try to integrate every new technology.     

Leachability and metal-binding capacity in ageing landfill material

In order to study the stability of landfilled heavy metals, landfill material from a combined household and industrial waste landfill was aerated for 14 months to simulate the natural ageing processes as air slowly begins to penetrate the landfill mass. During aeration, the pH of the landfill material decreased from around 8.6 to 8.1 and the carbon content also decreased. In order to investigate the possible fate of metals in ageing landfills, a four-stage sequential extraction technique was applied. The ability of the materials to bind metal ions by electrostatic attractions and to form stronger complexes was studied separately. The amount of exchangeable cations, the capacity to bind metal ions by electrostatic attraction and the capacity of the landfill material to complex copper ions were increased by the aeration process. However, results from the sequential analysis showed an increased solubility of sulphur and some metals (Cd, Co, Cu, Ni and Zn). Equilibrium speciation models (Medusa) indicated that the organic matter deposit had a significant capacity to bind metal ions provided that pH was sufficiently high. However, as carbonates are consumed over time, the risk for metal mobility increases. Therefore, the landfills can become an environmental risk, depending on variations in the solubility of metal ions due to changes in pH, redox status and the availability of organic material.     

Waste ecocompatibility in storage and reuse scenarios: global methodology and detailed presentation of the impact study on the recipient environments

In 1995, the ADEME launched a research program called "Waste Ecocompatibility" in order to define a reliable methodology for measuring the impact of waste in storage or reuse scenarios. The French concept of "Ecocompatibility" is defined as the situation where the pollutant flux from waste disposed of or used in specified conditions is compatible with the environmental acceptance of the receiving environments. The chief feature of this definition is to integrate the evaluation of the three following terms: pollutants emission from the waste, transport of the pollutants from the waste to the receptor cells and the environmental acceptance of the receiving environments. The "Waste Ecocompatibility" program consisted of a literature survey and an experimental part. The literature study aimed to determine factors and waste characteristics to be considered for a reliable ecocompatility assessment, to provide an overview of the available tools for measuring those factors and characteristics and to propose a first approach of the methodology. In the framework of the experimental program, this approach was then applied to three theoretical scenarios to validate the laboratory tools (comparative study of laboratory and field results) and to calibrate the global methodology. This paper deals with the results of the experimental program concerning the impact study on receiving environments: impact on plants and microorganisms living in soil, impacts on soil fauna and aquatic fauna. In other papers we intend to present the operational methodology for the assessment of waste ecocompatibility. It includes bio-assays at laboratory scale (microcosms), pilot scale (mesocosms) and in situ experiments (experimental prairie). To limit the use of in situ experiments other research works are necessary to validate bio-assays at laboratory or pilot scale.     

Recycling of cathode ray tube panel glasses as aggregates of concrete blocks and clay bricks

While the cathode ray tube (CRT) funnel containing lead could be transported to a smelting facility to recover lead, which could be an available option in domestic, a proper technology to recycle a CRT panel must be developed. Thus, it was suggested that CRT panel glass be used as aggregates of concrete blocks and clay bricks. Samples of blocks and bricks were fabricated with CRT powders and tested to measure their strength and absorption rate to determine their qualities, and environmental soundness was determined by measuring the leaching rate of hazardous metals. For concrete blocks, CRT panel glass powders incorporated as aggregates up to 40 % replacing stone powder was proposed as the proper condition for manufacturing blocks. Around 2 % of CRT panel incorporated into clay brick to substitute Kaoline was suggested to fabricate the best quality of clay brick. Results of leaching test met the criteria with much less concentration of hazardous metals, even lead compound containing in the CRT funnel. To conclude, the use of CRT panel powder after crushing it to the proper size as an aggregate of concrete blocks or clay bricks could be one of the appropriate alternatives to recycle for CRT glass waste being generated drastically in a short term.     

Describing variability of MSW composition data with the log-logistic distribution

Variations in solid waste composition data are necessary as inputs to solid waste planning, yet uncertainty exists regarding which probability distributions might be generally valuable to describe the variability. Twenty-two detailed analyses of solid waste from British Columbia, Canada, were fitted to distributions using the BestFit software. Alternative distributions were ranked based on three goodness-of-fit parameters and twelve waste fractions. The log-logistic distribution was found to be the most able to fit over the wide range of composition types considered. The results were demonstrated to be insensitive to the number of waste components or to the choice of a two- or three-parameter distribution. Although other distributions were able to better match the waste composition for individual waste types, the log-logistic distribution was demonstrated to fit, overall, a wide variety of waste composition types.     

The potential of financial incentives to enhance householders' kerbside recycling behaviour

Although the successful enhancement of householders' participation in kerbside recycling schemes is essential for household waste recycling schemes to reach their desired levels of achievement, our understanding of householders' responses to the various incentives available to waste managers is incomplete. In particular, whether and how the recycling behaviour of householders may be favourably altered through imposition of financial penalties or rewards is not fully understood. Surveys of householders' attitudes in the London Borough of Havering, served by a kerbside co-mingled survival bag recycling scheme, showed they might be better encouraged to recycle more through improvements to structural and promotional aspects of the recycling scheme than through imposition of financial incentives. If financial incentives were to be imposed to enhance kerbside recycling, householders preferred: (1) rewards to penalties, and (2) community-based rewards and local taxation rebates to other or individual rewards. Given the attitudes of householders and the resources that would be needed to monitor their recycling behaviour as a basis for delivering financial incentives, it is suggested that the priority for enhancing recycling should be to make appropriate improvements in the infrastructure and support of the kerbside scheme and service.     

Cysticercosis and salmonellosis in cattle caused by sewage sludge on Danish farmland

Three cases of infection in which beef tapeworms were transferred to cattle exposed to sewage sludge or septage applied to grass fields are reviewed together with an epizooty of salmonellosis, caused by infected latrine tankwagon used to irrigate a field. Mention is made of proposals on Danish regulations concerning the application of sewage sludge to agricultural soils, and the preventive measures with regard to epidemiological risks which are being discussed.It is concluded that it is possible to apply sewage sludge to agricultural soils without serious infection risks when appropriate preventive measures are taken. In particular raw latrine contents and septage from septic tanks appear to be particularly dangerous when spread on agricultural land.     

Treatment of anti-osmotic drug based pharmaceutical effluent in an upflow anaerobic fluidized bed system

During the production of Cephradine (a main constituent of anti-osmotic drug) a large quantity of concentrated effluent was produced. The main polluting compounds in this effluent are osmotic drug, acetic acid and ammonia. The feasibility of using a fluidized bed reactor under anaerobic condition with bioaugmentation to treat anti-osmotic drug based pharmaceutical effluent was evaluated. The main objective of the study was to show that bioaugmentation could be used to promote biological treatment to applications where conventional operation might be difficult or unfavourable. The effluent with chemical oxygen demand (COD) of 14000-18000 mg/l was treated in a fluidized bed reactor with a hydraulic retention time of 3-12 h. The reactor was unable to maintain consistent removal in conventional mode of operation due to an inability to retain and grow biomass. The COD reduction (%) after inoculation from a sequencing batch reactor was related to influent concentration, mass of inoculum and hydraulic retention time characterized by calculating the initial food to microorganism ratio. The role of volatile fatty acid (VFA) as cosubstrate was assessed with respect to COD reduction (%). Continuous COD reduction (%) attained a maximum value of 88.5% using bioaugmentation through periodic addition of acclimated cells every 2 days with 30-73.2 g of cells from an off-line enricher reactor.     

Increasing biogas production from sewage sludge anaerobic co-digestion process by adding crude glycerol from biodiesel industry

In an effort to convert waste streams to energy in a green process, glycerol from biodiesel manufacturing has been used to increase the gas production and methane content of biogas within a mesophilic anaerobic co-digestion process using primary sewage sludge. Glycerol was systematically added to the primary digester from 0% to 60% of the organic loading rate (OLR). The optimum glycerol loading range was from 25% to 60% OLR. This resulted in an 82–280% improvement in specific gas production. Following the feeding schedule described, the digesters remained balanced and healthy until inhibition was achieved at 70% glycerol OLR. This suggests that high glycerol loadings are possible if slow additions are upheld in order to allow the bacterial community to adjust properly. Waste water treatment plant operators with anaerobic digesters can use the data to increase loadings and boost biogas production to enhance energy conversion. This process provides a safe, environmentally friendly method to convert a typical waste stream to an energy stream of biogas.