New treatment of stabilized leachate by ozone/Fenton in the advanced oxidation process

Ozonation, combined with the Fenton process (O(3)/H(2)O(2)/Fe(2+)), was used to treat matured landfill leachate. The effectiveness of the Fenton molar ratio, Fenton concentration, pH variance, and reaction time were evaluated under optimum operational conditions. The optimum removal values of chemical oxygen demand (COD), color, and NH(3)-N were found to be 65%, 98%, and 12%, respectively, for 90 min of ozonation using a Fenton molar ratio of 1 at a Fenton concentration of 0.05 mol L(-1) (1700 mg/L) H(2)O(2) and 0.05 mol L(-1) (2800 mg/L) Fe(2+) at pH 7. The maximum removal of NH(3)-N was 19% at 150 min. The ozone consumption for COD removal was 0.63 kg O(3)/kg COD. To evaluate the effectiveness, the results obtained in the treatment of stabilized leachate were compared with those obtained from other treatment processes, such as ozone alone, Fenton reaction alone, as well as combined Fenton and ozone. The combined method (i.e., O(3)/H(2)O(2)/Fe(2+)) achieved higher removal efficiencies for COD, color, and NH(3)-N compared with other studied applications.     

Evaluation of the biomethane potential of solid fish waste

Manufacturing processes in fish canning industries generate a considerable amount of solid waste that can be digested anaerobically. The aim of this research was to study the biochemical methane potential of different solid fish waste. For tuna, sardine and needle fish waste, around 0.47g COD-CH(4)/g COD(added) was obtained in batch experiments with 1%TS; whereas for mackerel waste, the methane production attained 0.59g COD-CH(4)/g COD(added). The increase in the waste/inoculum ratio, from 1.1-1.3 to 2.8-3.3g VS(waste)/g VS(inoculum), led to overload due to VFA and LCFA accumulation. Afterward, co-digestion assays of fish waste with gorse were undertaken but the biochemical methane potential did not improve.     

Continuous high-solids anaerobic co-digestion of organic solid wastes under mesophilic conditions

With increasing concerns over the limited capacity of landfills, conservation of resources, and reduction of CO(2) emissions, high-solids (dry) anaerobic digestion of organic solid waste (OSW) is attracting a great deal of attention these days. In the present work, two dry anaerobic co-digestion systems fed with different mixtures of OSW were continuously operated under mesophilic conditions. Dewatered sludge cake was used as a main seeding source. In reactor (I), which was fed with food waste (FW) and paper waste (PW), hydraulic retention time (HRT) and solid content were controlled to find the maximum treatability. At a fixed solid content of 30% total solids (TS), stable performance was maintained up to an HRT decrease to 40 d. However, the stable performance was not sustained at 30 d HRT, and hence, HRT was increased to 40 d again. In further operation, instead of decreasing HRT, solid content was increased to 40% TS, which was found to be a better option to increase the treatability. The biogas production rate (BPR), CH(4) production yield (MPY) and VS reduction achieved in this condition were 5.0m(3)/m(3)/d, 0.25 m(3) CH(4)/g COD(added), and 80%, respectively. Reactor (II) was fed with FW and livestock waste (LW), and LW content was increased during the operation. Until a 40% LW content increase, reactor (II) exhibited a stable performance. A BPR of 1.7 m(3)/m(3)/d, MPY of 0.26 m(3) CH(4)/g COD(added), and VS reduction of 72% was achieved at 40% LW content. However, when the LW content was increased to 60%, there was a significant performance drop, which was attributed to free ammonia inhibition. The performances in these two reactors were comparable to the ones achieved in the conventional wet digestion and thermophilic dry digestion processes.     

First-order kinetic gas generation model parameters for wet landfills

Landfill gas collection data from wet landfill cells were analyzed and first-order gas generation model parameters were estimated for the US EPA landfill gas emissions model (LandGEM). Parameters were determined through statistical comparison of predicted and actual gas collection. The US EPA LandGEM model appeared to fit the data well, provided it is preceded by a lag phase, which on average was 1.5 years. The first-order reaction rate constant, k, and the methane generation potential, L(o), were estimated for a set of landfills with short-term waste placement and long-term gas collection data. Mean and 95% confidence parameter estimates for these data sets were found using mixed-effects model regression followed by bootstrap analysis. The mean values for the specific methane volume produced during the lag phase (V(sto)), L(o), and k were 33 m(3)/Megagrams (Mg), 76 m(3)/Mg, and 0.28 year(-1), respectively. Parameters were also estimated for three full scale wet landfills where waste was placed over many years. The k and L(o) estimated for these landfills were 0.21 year(-1), 115 m(3)/Mg, 0.11 year(-1), 95 m(3)/Mg, and 0.12 year(-1) and 87 m(3)/Mg, respectively. A group of data points from wet landfills cells with short-term data were also analyzed. A conservative set of parameter estimates was suggested based on the upper 95% confidence interval parameters as a k of 0.3 year(-1) and a L(o) of 100 m(3)/Mg if design is optimized and the lag is minimized.     

Enhanced methane production from ultrasound pre-treated and hygienized dairy cattle slurry

The effect of hygienization (70 °C, 60 min) and ultrasound (6000 ± 500 kJ/kg total solids (TS)) pre-treatments on hydrolysis and biological methane (CH(4)) potential (BMP) of dairy cattle slurry was studied. The BMP of the untreated slurry (control) was 210 ± 10 Nm(3) CH(4)/ton volatile solids (VS) added; after ultrasound pre-treatment it was 250 ± 10 Nm(3) CH(4)/ton VS(added) and after hygienization 280 ± 20 Nm(3) CH(4)/ton VS(added). The specific methanogenic activity (SMA) of the inoculum increased from 22 (untreated) to 26 (ultrasound treated) and up to 28 N ml CH(4)/g VS d, after hygienization. However, only hygienization achieved a positive net energy balance. Both pre-treatments increased the VS-based hydrolysis of slurry (10-96%), soluble nitrogen (N(sol)) content in digestates (20 ± 5%) and biodegradability of the slurry (8 ± 3%) as estimated via elevated VS removal.     

用混合二元酸制备混合酸二甲酯

以工业副产物混合二元酸（DBA）和甲醇为原料,用自制PW12／SiO2作催化剂制备混合酸二甲酯（DME）,确定了最佳制备条件：甲醇与DBA摩尔比为3．5,PW12／SiO2加入量（PW12／SiO2中PW12占DBA的质量分数）为2％,反应时间为4．5h,100gDBA中甲苯加入量为50mL。在此最佳条件下,DME收率为84．7％,所得DME为无色澄清液体,其中丁二酸二甲酯的质量分数为11．03％,戊二酸二甲酯的质量分数为13．88％,己二酸二甲酯的质量分数为73．79％。PW12／SiO2具有较好的稳定性和一定的重复使用性,PW12／SiO2重复使用5次时的DME收率仍大于70％。     

Thermodynamic and Diffusion Properties of Biodegradable Systems Based on Starch and Cellulose Derivatives

The interval sorption and diffusion of water vapor were studied for two systems: methylcellulose (MC)/starch and carboxymethylcellulose (CMC)/starch. The diffusion coefficient of water vapor and the Gibbs free energy of swelling of these blends in water were estimated. The Gibbs free energy of mixing starch with the cellulose derivatives was determined using the thermodynamic cycle. CMC/starch was shown to be more compatible than MC/starch. Biodegradation of these systems in the water–soil environment was measured and found to increase with the concentration of starch in its blends with cellulose derivatives.     

Microstructural and Physical Properties of Thermoplastic Corn Starch/Polystyrene Blend Foams Affected by Different Contents and Combinations of Plasticizers

Journal of Polymers and the Environment - A comprehensive study was performed on thermoplastic corn starch (TPS)/polystyrene (PS) blend foam to optimize the formulation from the aspects of...     

Reinforcing and Toughening Modification of PPC/PBS Blends Compatibilized with Epoxy Terminated Hyperbranched Polymers

Journal of Polymers and the Environment - Polypropylene carbonate (PPC)/polybutylene succinate (PBS) blends were prepared by melt-blending with terminal epoxy-based hyperbranched polymers (EHBP) as...     

A Comparison of the Effect of Silk Fibroin Nanoparticles and Microfibers on the Reprocessing and Biodegradability of PLA/PCL Blends

Journal of Polymers and the Environment - In this research, the effect of reprocessing on the properties of poly(lactic acid)/poly(ε-caprolactone) (PLA/PCL) blends reinforced with silk...     

Nonisothermal Melt Crystallization Study of Poly(ethylene succinate)/Cellulose Nanocrystals Composites

Journal of Polymers and the Environment - The nonisothermal melt crystallization behavior of fully biodegradable poly(ethylene succinate)/cellulose nanocrystals (PES/CNC) composites with low...     

Tensile,Thermal and Physical Properties of Washightonia Trunk Fibres/Pineapple Fibre Biophenolic Hybrid Composites

Journal of Polymers and the Environment - In this work, hybrid composites reinforced with Washightonia trunk fibres (GW)/Pineapple fibre (PALF) in bio-phenolic matrix were fabricated with...     

Physicochemical and Antibacterial Evaluation of Poly (Vinyl Alcohol)/Guar Gum/Silver Nanocomposite Films for Food Packaging Applications

Journal of Polymers and the Environment - In this study, we prepared Poly (vinyl alcohol) (PVA)/Guar gum (GG) based nanocomposite films with a different weight ratio of silver nanoparticles (AgNPs)...     

Preparation and Characterization of PVDF/g-C3N4/Chitosan Polymeric Membrane for the Removal of Direct Blue 14 Dye

Journal of Polymers and the Environment - Polyvinylidene fluoride (PVDF)/g-C3N4/Chitosan thin film membranes were prepared by immersing of PVDF/g-C3N4 membrane in solution containing various...     

Long-term anaerobic digestion of food waste stabilized by trace elements

The purpose of this study was to examine if long-term anaerobic digestion of food waste in a semi-continuous single-stage reactor could be stabilized by supplementing trace elements. Contrary to the failure of anaerobic digestion of food waste alone, stable anaerobic digestion of food waste was achieved for 368 days by supplementing trace elements. Under the conditions of OLR (organic loading rates) of 2.19-6.64 g VS (volatile solid)/L day and 20-30 days of HRT (hydraulic retention time), a high methane yield (352-450 mL CH(4)/g VS(added)) was obtained, and no significant accumulation of volatile fatty acids was observed. The subsequent investigation on effects of individual trace elements (Co, Fe, Mo and Ni) showed that iron was essential for maintaining stable methane production. These results proved that the food waste used in this study was deficient in trace elements.     

From Waste to Reuse: Manufacture of Ecological Composites Based on Biopolyethylene/wood Powder with PE-g-MA and Macaíba Oil

Journal of Polymers and the Environment - This work aimed to investigate the biopolyethylene (BioPE)/wood powder (WP) composites compatibilized with polyethylene-grafted maleic anhydride (PE-g-MA),...     

Novel Silica Functionalized Monosodium Glutamate/PVA Cross-Linked Membranes for Alkali Recovery by Diffusion Dialysis

Journal of Polymers and the Environment - In this work, two types of silica functionalized monosodium glutamate (GMSG and VMSG)/poly(vinyl alcohol) (PVA) were cross-linked by sol–gel process...     

Novel Fabrication of PAA/PVA/Yeast Superabsorbent with Interpenetrating Polymer Network for pH-Dependent Selective Adsorption of Dyes

Traditional superabsorbent polymers have wide application potential as an adsorbent, but the poor physical and mechanical properties limit their further applications. To tentatively overcome this dilemma, a novel poly(acrylic acid)/poly(vinyl alcohol)/yeast superabsorbent polymers (PAA/PVA/yeast SAPs) with interpenetrating polymer networks (IPNs) were fabricated herein via solution polymerization. The mechanical stability tests showed that the resulting products could desirably resist the destruction of shear flow (<5000 rpm) and load pressure (<3 kg). The effects of yeast content, pH, contact time, initial dye concentration and temperature were systematically studied to evaluate their adsorption properties. Consecutive five cycles of adsorption–desorption indicated that their easy regeneration and reusability. More importantly, the PVA/PAA/yeast SAPs displayed brilliant pH-dependent selective adsorption for dyes in dye mixtures. It is believed hereby that the PAA/PVA/yeast SAPs can be expected to be economically and technically feasible for the scalable treatment of dyes wastewater.     

Treatment of the methanogenic landfill leachate with thin open channel reverse osmosis membrane modules

A leachate purification system, equipped with the thin open channel spiral wound modules, is studied in this paper. In Phase I, effluent from an activated sludge process followed by the flocculation/sedimentation process was fed into the landfill leachate treatment unit. After 2 wk of operation, the permeate flux dropped dramatically, from an average value of 6.5l/m(2)/h to 4.23 l/m(2)/h. The significant decline of membrane flux was likely caused by membrane fouling. In Phase II, raw leachate was fed directly into the reverse osmosis leachate treatment system. An average flux of 7.8l/m(2)/h was maintained at an initial trans-membrane pressure difference of 20 bar, which increased to 40 bar before membrane chemical cleaning. An average recovery rate of 70% was achieved. Throughout the observation in Phase II, an average reduction rate of 98.2% for the dissolved solids was obtained. The reduction rate of COD was greater than 99.5% with a constant level of the permeate COD. Chloride was eliminated by more than 99%, while over 98% of NH(4)-N was reduced. A negligible permeate flux drop was observed after cleaning the membrane effectively. The study shows that direct reverse osmosis membrane filtration with thin open channel spiral wound modules is able to achieve satisfactory results in terms of water quality, process stability and membrane flux. The obtained quality of the permeate quality in this study met the German standards for leachate discharge. At the end of each filtration cycle, the membrane was maintained through alkaline chemical cleaning in order to remove any irreversible membrane fouling. After the maintenance procedure, the membrane flux was found to recover to the initial value.     

Survey of solid waste generation and composition in a rapidly growing urban area in Central Nigeria

The objective of this study was to carry out a field survey of the solid waste generation profile in parts of Makurdi, a rapidly growing urban city in north central Nigeria. The areas surveyed covered low, medium and high-density residential quarters, representing high/medium/low income groups in the area. Results of the survey show that the bulk ( approximately 82%) of the solid waste generated in the area originates from households, rather than from commercial, institutional or industrial premises. Of the waste from households, a substantial proportion consists of various putrescible materials (36-57%), with ash, dust and sand (combined) forming another significant proportion (21-41%). From the non-household sources, putrescible matter is also significant (23-45%), as is the combined ash/dust/sand fraction (32-36%). The quantity of plastics/cellophane materials from household and non-household sources was, however, comparable (6-10%). There was more paper from commercial and institutional premises (9-12%) than from household or small/medium scale industrial premises (2-4%). Glass (0.1-6.9%), metals (mostly cans and bottle corks, 0.7-3.4%) and textiles (0.3-6%) form only a minor proportion of the waste across generators. Waste generation rates were for households, 0.54kg/cap/day; for commercial, 0.018kg/m(2)/day; institutional, 0.015kg/m(2)/day while for small and medium scale industries, the rate was 0.47kg/m(2)/day. As there is no previous study of this kind in the Makurdi urban area, what is reported here may be taken as baseline for the entire area. The implications of the findings for solid waste management planning are discussed.