Hepatitis B virus infection among health care workers in Public Teaching Hospitals in Khartoum State, Sudan

Background

Hepatitis B virus (HBV) infection is a global public health problem. It is estimated that there are more than 300 million HBV carriers in the world.

Aim

The study aimed to examine the sero-prevalence of hepatitis B virus (HBV) markers among health care workers (HCWs) in Public Teaching Hospitals in Khartoum State, in the year 2004.

Methods

The study is an observational, cross sectional, facility-based study. It was conducted on stratified two-stage cluster random sample of 843 subjects. The study followed non-parametric statistical methods, using Z-test for single proportion.

Results

Among the 843 subjects tested for all HBV markers (Anti-HBc, HBsAg, HBsAb, and HBeAg), the prevalence of Anti-HBc, HBsAg, HBsAb, and HBeAg was found to be 57% (CI 95%:53-60%), 6% (CI 95%:4.0-8.0%), 37% (CI 95%:34-40%) and 9% (CI 95%:7-11%) respectively. P < 0.05.

Conclusion

Seroprevalence of all HBV markers (P < 0.05) was found to be significantly high, while the rate of immunity against HBV infection was low among health care workers In Public Teaching Hospitals in Khartoum State, Sudan.     

Time trends and predictive factors for safety perceptions among incoming South Australian university students

Problem

Young workers are over-represented in injury statistics. In order to develop injury prevention strategies, this study investigated time trends and predictive factors relating to safety skills, confidence, and attitudes.

Method

Annual surveys were conducted from 2006-2009 among incoming students at the University of Adelaide. The questions addressed safety training, injury experience, and health and safety perceptions.

Results

Time trends in training, perceived safety skills, confidence, and attitudes were not significant. In terms of skills and confidence, the most important correlate was safety training outside of high school (odds ratio = 1.6), especially when repeated, assessed, or in face to face mode. Feeling strongly about safety issues was best predicted by injury experience (OR = 1.7) and gender.

Discussion

These results emphasize the value of assessed training, but they are also consistent with published U.S. data, indicating no improvement over time. It is suggested that there be a more integrated approach in safety education, involving schools and workplaces.

Impact on industry

By developing an understanding of student safety perceptions and experiences, this research aims to target strategies to reduce the excess injury rate for young workers. Workplaces should be more aware of the limitations of school-based safety education and a more integrated and evidence-based approach should be developed, involving schools and workplaces.     

The development and validation of a psychological contract of safety scale

Introduction

This paper builds on previous research by the author and describes the development and validation of a new measure of the psychological contract of safety. The psychological contract of safety is defined as the beliefs of individuals about reciprocal safety obligations inferred from implicit and explicit promises.

Method

A psychological contract is established when an individual believes that perceived employer and employee safety obligations are contingent on each other. A pilot test of the measure is first undertaken with participants from three different occupations: nurses, construction workers, and meat processing workers (N = 99). Item analysis is used to refine the measure and provide initial validation of the scale. A larger validation study is then conducted with a participant sample of health care workers (N = 424) to further refine the measure and to determine the psychometric properties of the scale.

Results

Item and correlational analyses produced the final employer and employee obligations scales, consisting of 21 and 17 items, respectively. Factor analyses identified two underlying dimensions in each scale comparable to that previously established in the organizational literature. These transactional and relational-type obligations provided construct validity of the scale. Internal consistency ratings using Cronbach's alpha found the components of the psychological contract of safety measure to be reliable.

Impact on Industry

The refined and validated psychological contract of safety measure will allow investigation of the positive and negative outcomes associated with fulfilment and breach of the psychological contract of safety in future research.     

Children's behavioral traits and risk of injury: Analyses from a case-control study of agricultural households

Problem

Children on family agricultural operations have high risk of injury. The association between children's behavioral traits and their risk of injury is not well understood.

Method

Data from the Regional Rural Injury Study-II were used to assess behavioral risk factors for injury to children ages six to < 20 years. A total of 379 injury events (cases) and 1,562 randomly selected controls were identified. Adjusted odds ratios (OR) and 95% confidence intervals (CI), calculated using logistic regression, were used to estimate injury risk in reference to behavioral traits.

Results

Injury risks were greater for children with high levels of depressive symptoms (OR = 1.9, CI = 1.0-3.7) and aggression (OR = 1.6, CI = 0.9-2.7), and low levels of careful/cautious behavior (OR = 1.8, CI = 1.1-2.9). Children with low levels of self-regulation had reduced risks (OR = 0.4, CI = 0.2-0.8).

Discussion

Results suggest that children's behaviors affect their risk of agricultural injury. Additional research could elucidate mechanisms and inform interventions.

Impact on industry

The development of multifaceted, sustainable approaches for prevention is necessary for this unique population. These findings suggest a need for interventions that incorporate specific behavior-related risk factors in the context of family farms and ranches.     

Occupational fatalities due to electrocutions in the construction industry

Introduction

Occupational fatalities due to contact with electricity account for approximately 9% of all deaths in the construction industry and is the fourth leading cause of death in this industry.

Method

Differences in the proportions of electrocutions in the construction industry are significantly different from other industries based upon the age of the worker and the source of the electricity.

Results

This study found that, in the construction industry, the proportion of occupational fatalities due to contact with electric current is significantly higher for workers in the 16 to 19 years old age group. Contact with overhead power lines occurred more frequently with younger workers, while contact with electric wiring, transformers, and related equipment was found to occur more frequently with older workers. The proportion of fatalities due to this event was also found to account for a significantly greater proportion of fatalities in the construction industry overall.

Impact on industry

The proportions of electrocution fatalities in the construction industry were found to be significantly higher for younger workers when compared to all other industries. Focusing prevention measures toward younger workers who work near overhead power lines could have a significant impact upon death rates. For older workers, the focus should be on those who work on or near transformers, electrical wiring, and components. Across the construction industry, implementation of effective lockout-tagout programs, and verification of energy isolation, can prevent approximately 125 fatalities per year in the construction industry.     

Tracking the prevalence of rollover protective structures on U.S. farm tractors: 1993, 2001, and 2004

Problem

Between 1992 and 2005, 1412 workers on farms died from tractor overturns. A Rollover Protective Structure (ROPS) is a proven intervention to reduce overturn deaths. However, farm characteristics that are associated with the adoption of ROPS are not well understood.

Methods

ROPS prevalence statistics were derived from National Institute for Occupational Safety and Health (NIOSH) surveys that tracked ROPS use on farms. Data were from the years 1993, 2001, and 2004.

Results

In 1993, 38% of tractors were equipped with ROPS. This increased to 51% by 2004. ROPS prevalence rates were higher on farms in the Southern region of the United States, on farms where the operator was 25-34 years old, and on farms with $100,000 or more of farm sales. Low ROPS prevalence rates were associated with farm operators 65 years old or older and with farms with less than $10,000 of farm product sales.

Summary

The increase in ROPS prevalence between 1993 and 2004 has not been sufficient to decrease the rate of tractor overturn deaths on farms. Incentive programs targeting older farm operators and low-income farm operations are suggested to increase ROPS use on tractors.

Impact on Industry

The study provides farm characteristics associated with low ROPS prevalence rates. The results can be used to target farms for future ROPS promotion activities.     

Crash involvement during the different phases of the New Zealand Graduated Driver Licensing System (GDLS)

Introduction

The New Zealand Graduated Driver Licensing System (GDLS) is designed to allow novice drivers to gain driving experience under conditions of reduced risk.

Method

To examine the effectiveness of the GDLS, an analysis of how the crash involvement of novice drivers changes as drivers move through the GDLS was undertaken. Crash profiles were created by data matching the New Zealand license and crash databases, covering a time period from 1999-2006.

Results

The crash profiles show that the initial learner period of the GDLS is relatively safe and the time at which novice drivers have the highest rate of crash involvement is during the first few months of solo driving. Analysis using logistic regression also showed an effect of age and gender, with higher crash involvement associated with younger drivers and males. In addition, individuals who gained a full license within 12-18 months of holding a restricted license, due to completion of a time-discount associated educational program, had a higher level of involvement in crashes than individuals who gained a full license after 18 months.

Conclusions

The crash profiles provide an insight into the crash risk associated with different phases of the New Zealand GDLS.

Impact on Industry

Increasing the age at which drivers first begin to solo drive and the removal of the time-discount associated with completion of an educational program should be considered.     

Continued progress in the prevention of nail gun injuries among apprentice carpenters: What will it take to see wider spread injury reductions?

Problem

Nail guns are a common source of acute, and potentially serious, injury in residential construction.

Method

Data on nail gun injuries, hours worked and hours of tool use were collected in 2008 from union apprentice carpenters (n = 464) through classroom surveys; this completed four years of serial cross-sectional data collection from apprentices. A predictive model of injury risk was constructed using Poisson regression.

Results

Injury rates declined 55% from baseline measures in 2005 with early training and increased use of tools with sequential actuation. Injury rates declined among users of tools with both actuation systems, but the rates of injury were consistently twice as high among those using tools with contact trip triggers.

Discussion and impact

Nail gun injuries can be reduced markedly through early training and use of tools with sequential actuation. These successful efforts need to be diffused broadly, including to the non-union sector.     

The contribution of traumatic brain injury to the medical and economic outcomes of motor vehicle-related injuries in Ohio

Objective

To describe traumatic brain injury (TBI) among injured roadway users. Aim 1 assessed the association of age, gender, alcohol/drug use, safety equipment use, type of roadway user, metropolitan area, and primary payer with motor vehicle-related TBI outcome. Aim 2 assessed the relationship of motor vehicle-related TBI and risk/protective factors with medical and economic outcomes.

Methods

Population-level hospital and trauma databases from the Ohio Hospital Association and Ohio Department of Public Safety, respectively, were probabilistically linked for 2003 through 2006. Injured roadway users (motor vehicle occupants, motorcyclists, bicyclists, pedestrians, and others) were assessed for TBI, ventilator use, intensive care unit (ICU) admission, injury severity score (ISS), need for rehabilitation, death, and total hospital charges.

Results

The odds of a motor vehicle-related TBI were greater among those not using safety equipment (OR = 1.56). The interactions of alcohol/drug use by gender and of alcohol/drug use by location were significant. Sustaining a TBI increased the odds of requiring ventilation (OR = 3.66), being admitted to the ICU (OR = 2.51), having a high ISS (OR = 4.24), requiring rehabilitation (OR = 2.22), or death (OR = 2.52). When compared with a non-TBI, total hospital charges increased by a factor of 1.35 for a TBI. Hospital charges were $46,441 on average for individuals who sustained a TBI, whereas mean hospital charges were $32,614 for patients with a non-TBI.

Conclusions

Among injured roadway users, individuals who sustain a TBI are more likely to require extensive medical care and have injuries resulting in death.

Impact on industry

Prevention strategies aimed at reducing alcohol use and increasing safety device use should be encouraged to reduce the burden of TBI.     

An economic evaluation of a participatory ergonomics process in an auto parts manufacturer

Problem

We assess the costs and consequences of a participatory ergonomics process at a Canadian car parts manufacturer from the perspective of the firm.

Method

Regression modeling was used with interrupted time series data to assess the impact of the process on several health measures. Consequences were kept in natural units for cost-effectiveness analysis, and translated into monetary units for cost-benefit analysis.

Results

The duration of disability insurance claims and the number of denied workers' compensation claims was significantly reduced. The cost-effectiveness ratio is $12.06 per disability day averted. The net present value is $244,416 for a 23-month period with a benefit-to-cost ratio of 10.6, suggesting that the process was worth undertaking (monetary units in 2001 Canadian dollars).

Discussion

Our findings emphasize the importance of considering a range of outcomes when evaluating an occupational health and safety intervention.

Impact on industry

Participatory ergonomics process can be cost-effective for a firm.     

A traffic safety evaluation of California's traffic violator school citation dismissal policy

Introduction

This study evaluated California's traffic violator school (TVS) citation dismissal policy.

Method

This study identified and compared two large samples of drivers either completing a TVS (N = 210,015) or convicted of a traffic citation (N = 168,563).

Results

Prior to adjudication, the TVS group had characteristics (e.g., lower prior conviction rate and smaller proportion of males) that were predictive of a lower subsequent crash risk. However, the TVS group exhibited significantly more crashes than did the convicted group in the subsequent one-year period. The difference (4.83%) increased to 10% after adjusting for the more favorable characteristics of the TVS group. The TVS group also had a higher adjusted subsequent crash rate at each prior driver record entry level, reflecting a loss in the general and specific deterrence of the non-conviction masked status of TVS dismissed citations. It was reported that the TVS dismissal policy results in approximately 12,300 additional crashes annually with economic costs of approximately $398,000,000.

Conclusions

The avoidance of licensing actions resulting from the dismissal policy assists in explaining why the driving public is exposed to an increased crash risk. A number of recommendations are offered to reduce the negative traffic safety impact of the TVS citation dismissal policy.     

Comparison of risk factors for falls from height between commercial and residential roofers

Introduction

The purpose of this investigation was to compare commercial roofers and residential roofers in terms of their behaviors, beliefs, working conditions, and attitudes toward the use of fall protection devices, which could lead to fall accidents.

Methods

A cross-sectional sample of 252 roofers participated in the survey in the Midwest (Wisconsin, Illinois, Michigan, Indiana, and Iowa).

Results

Residential roofers were more likely to fall (adjusted prevalence ratio = 1.57, 95% CI = 0.86, 2.27) than commercial roofers. Existence of fall protection programs, enforcement of fall protection device use, actual use of fall protection devices, work type, company size, and race/ethnicity were significantly associated with fall accidents.

Impact on industry

This study adds insight into fall accidents from roofs in the construction industry and provides industry-specific cautions against fall accidents that can be reflected in regulatory agency implementation.     

The relationship between recruitment processes, familiarity, trust, perceived risk and safety

Introduction and Method

Participants′ perceptions of the safety-related aspects of their organization′s recruitment processes were examined, as were their perceptions of safety aspects associated with new recruits.

Results

One hundred and fifty-four professional fire fighters indicated the trust they held in the safety-related aspects of their organizations′ selection and pre-start training. Perceived trust in pre-start training was negatively correlated (r = -.24, p < .01) with the risk associated with new recruits, and positively correlated (r = .50, p < .01) with ratings of trust in recruits to immediately work safely. Furthermore, trust in recruits to immediately work safely was negatively correlated (r = -.21, p < .01) with crews′ safety behavior toward recruits.

Conclusions

These results are interpreted as particularly dangerous for workers, as new recruits lack familiarity with aspects of their new workplace that cannot be addressed by either selection or pre-start training, making them a risk.

Impact on Industry

Organizations should actively identify new recruits, and encourage existing team members not to immediately trust new recruits to work safely.     

Does the built environment affect when American teens become drivers? Evidence from the 2001 National Household Travel Survey

Problem

Motor vehicle crashes are the most common cause of death for American adolescents. However, the impact of where teens live on when they begin driving has not been studied.

Method

Data from the 2001 National Household Travel Survey were used to estimate the effect of residential density on the driver status of teens aged 16 to 19 years after matching on demographic characteristics.

Results

Controlling for demographic characteristics, 16 and 17 year old teens in high density neighborhoods had driver rates 15 percentage points below teens living in less dense areas (p < 0.001). The effect for 18 and 19 year olds was a 9 percentage point decrease (p < 0.001).

Summary

These results suggest teens living in less dense and more sprawling communities initiate driving at a younger age than comparable teens in compact areas, placing them at increased risk for crash related injuries. Impact on Industry: The role of environmental factors, such as neighborhood walkability and provision of transit, should be considered in young driver programs.     

Whole-body vibration knowledge survey of U.S. occupational safety and health professionals

Problem

Whole-body vibration (WBV) is an occupational issue of concern due to adverse health effects or simple discomfort and annoyance. Unlike in Europe, WBV is an emerging topic in the U.S. safety and health (S&H) professional community. We hypothesized that at least one-half of the U.S. occupational S&H professionals knew little or nothing about WBV.

Method

We conducted a cross-sectional study (survey) of WBV knowledge among members of the American Society of Safety Engineers. A Likert scale (1-none to 5-expert) was used to determine WBV topic knowledge levels (KL_1-5).

Results

Analysis of 2,764 responses revealed that 69.5% of the participants self-reported a less than basic WBV understanding. The WBV KL_1-5 mean for all participants was 1.94 ± 1.00, corresponding to an awareness of WBV without a depth of understanding.

Summary

Many at-risk U.S. workers may not be supported by occupational S&H professionals with adequate WBV knowledge.

Impact on Industry

A significant number of U.S. workers may be exposed to unhealthy levels of whole-body vibration. However, the U.S. occupational safety and health community is generally unprepared to anticipate, monitor, and control the whole-body vibration hazard.     

Required hours of practice for learner drivers: A comparison between two Australian jurisdictions

Problem

This study considers whether requiring learner drivers to complete a set number of hours while on a learner license affects the amount of hours of supervised practice that they undertake. It compares the amount of practice that learners in Queensland and New South Wales report undertaking. At the time the study was conducted, learner drivers in New South Wales were required to complete 50 hours of supervised practice while those from Queensland were not.

Method

Participants were approached outside driver licensing centers after they had just completed their practical driving test to obtain their provisional (intermediate) license. Those agreeing to participate were interviewed over the phone later and asked a range of questions to obtain information including socio-demographic details and amount of supervised practice completed.

Results

There was a significant difference in the amount of practice that learners reported undertaking. Participants from New South Wales reported completing a significantly greater amount of practice (M = 73.3 hours, sd = 29.12 hours) on their learner license than those from Queensland (M = 64.1 hours, sd = 51.05 hours). However, the distribution of hours of practice among the Queensland participants was bimodal in nature. Participants from Queensland reported either completing much less or much more practice than the New South Wales average.

Summary

While it appears that the requirement that learner drivers complete a set number of hours may increase the average amount of hours of practice obtained, it may also serve to discourage drivers from obtaining additional practice, over and above the required hours.

Impact on Industry

The results of this study suggest that the implications of requiring learner drivers to complete a set number of hours of supervised practice are complex. In some cases, policy makers may inadvertently limit the amount of hours learners obtain to the mandated amount rather than encouraging them to obtain as much practice as possible.     

The effect of work hours on adverse events and errors in health care

Introduction

We studied the relationship between registered nurses' extended work duration with adverse events and errors, including needlestick injuries, work-related injuries, patient falls with injury, nosocomial infections, and medication errors.

Method

Using bivariate and multivariate logistic regression, this secondary analysis of 11,516 registered nurses examined nurse characteristics, work hours, and adverse events and errors.

Results

All of the adverse event and error variables were significantly related to working more than 40 hours in the average week. Medication errors and needlestick injuries had the strongest and most consistent relationships with the work hour and voluntary overtime variables.

Discussion

This study confirms prior findings that increased work hours raise the likelihood of adverse events and errors in healthcare, and further found the same relationship with voluntary overtime.

Impact on Industry

Legislation has focused on mandatory overtime; however, this study demonstrated that voluntary overtime could also negatively impact nurse and patient safety.     

Fall arrest characteristics of a scissor lift

Problem

Census of Fatal Occupational Injuries (CFOI) data indicate 306 aerial lift fatalities between 1992-2003. Seventy-eight of these fatalities specifically involved scissor lifts. Members of standards committees have requested that NIOSH conduct research to determine the effects of safety-control practices related to using fall-protection systems for scissor lifts.

Method

This research examined the structural and dynamic stability of a scissor lift subjected to fall arrest forces. This was accomplished by conducting drop tests from a scissor lift. Anchorage locations evaluated included manufacturer-supplied anchorage points on the scissor lift platform as well as mid-rail and top-rail locations.

Results

Preliminary drop tests determined that a 2400 lb maximum arrest force (MAF) could be generated by dropping 169 lb through a fall height of 36” using Nystron® rope as a lanyard. The scissor lift maintained structural and dynamic stability for all drop tests when fully extended and on an incline.

Discussion

Anchoring a fall arrest system to either the mid-rail or top-rail is not a recommended practice by the scissor lift manufacturer. Anchor points are provided on the platform floor of the scissor lift for this purpose. However, our results demonstrate that the mid-rail and top-rail absorb substantial energy from an arrested fall and may have potential as appropriate anchorage points.

Impact to Industry

Employers and workers should consider implementing fall arrest systems when using scissor lifts as part of their overall risk mitigation plan for fall injury prevention.     

Overhead drilling: Comparing three bases for aligning a drilling jig to vertical

Problem

Drilling overhead into concrete or metal ceilings is a strenuous task done by construction workers to hang ductwork, piping, and electrical equipment. The task is associated with upper body pain and musculoskeletal disorders. Previously, we described a field usability evaluation of a foot lever and inverted drill press intervention devices that were compared to the usual method for overhead drilling. Both interventions were rated as inferior to the usual method based on poor setup time and mobility.

Method

Three new interventions, which differed on the design used for aligning the drilling column to vertical, were compared to the usual method for overhead drilling by commercial construction workers (n = 16).

Results

The usual method was associated with the highest levels of regional body fatigue and the poorest usability ratings when compared to the three interventions.

Conclusion

Overall, the 'Collar Base' intervention design received the best usability ratings.

Impact on Industry

Intervention designs developed for overhead drilling may reduce shoulder fatigue and prevent subsequent musculoskeletal disorders. These designs may also be useful for other overhead work such as lifting and supporting materials (e.g., piping, ducts) that are installed near the ceiling. Workplace health and safety interventions may require multiple rounds of field-testing prior to achieving acceptable usability ratings by the end users.     

Are drivers' comparative risk judgments about speeding realistic?

Introduction

This study focused on comparative judgments about speeding risks among young drivers who have a high risk of being involved in a traffic accident.

Method

We examined (a) how these drivers assess their risk of sanctions and their risk of causing an automobile crash because of speeding in comparison to the estimated risks of other drivers, and (b) how realistic their comparative risk judgments are. We measured the relationship between the drivers' comparative risk judgments, self-reported speeding, and driving-related sensation-seeking. We hypothesized that (a) they would think they have less risk of sanctions and of causing a car accident than others, and (b) their comparative judgments of speeding risks would be linked to self-reported speeding and driving-related sensation-seeking. The study was based on a computerized questionnaire survey conducted with 3,002 young drivers (mean age = 22.3) administered by professional investigators.

Results

The results confirmed our hypotheses.

Impact on Industry

In order to improve the effectiveness of prevention measures and to evaluate the effect of them, road-safety interventions should take into account comparative risk judgments about the targeted risk behavior.