Sources and distribution of polycyclic aromatic hydrocarbons in sediments from the Spanish northern continental shelf. Assessment of spatial and temporal trends

The distribution of polycyclic aromatic hydrocarbons was determined in surface sediments collected at 36 stations along the Spanish Northern continental shelf in March and September 2003, and February 2005. Concentrations of PAHs (Σ13 parent components) were in the range of 22-47528 μg/kg dw, the highest values corresponding to coastal urban-industrial hotspots and decreasing offshore. Sediment quality guidelines (SQGs) showed that concentrations of total PAHs were below the threshold effect level (TEC) in 27 stations (81%) and above in 7, two of which (Gijon and Bilbao) were above the probable effect concentration (PEC). The detailed study of diagnostic ratios suggested a rather uniform mixture of petrogenic and pyrolytic PAH sources along the continental shelf, with a slight decrease of the latter moving westwards and offshore. In order to assess the incidence of sediment sampling on the variability of the results, selected stations were also monitored in February and September 2004 and September 2005. The average field variance of the values obtained for each station was 31% that decreased to 23% when the values were normalized to TOC.     

Using Various Guidelines and Approaches for the Assessment of Marine Sediment Quality

The aim of the present study is to explore the implications of using different quality guidelines and approaches for marine sediment characterization. As a case study, the sediments of Souda Port, Crete, Greece, were examined in order to assess heavy metal contamination and to estimate anthropogenic contribution and potential adverse effects to aquatic environment, as well as to indicate feasible future management options. The concentration of six heavy metals (Co, Cr, Cu, Ni, Pb, and Zn) was determined and compared with different sediment quality guidelines (SQGs) and regional/national criteria established for dredged material characterization and management. In addition, the geo-accumulation index (I_geo) was calculated and the sediments toxicity and heavy metals bioavailability were determined. Based on the experimental data, it is deduced that Souda sediments are characterized as moderately polluted only in terms of Co, Ni, and Pb.     

Sediment quality guidelines: challenges and opportunities for improving sediment management

During the International Conference on Deriving Environmental Quality Standards for the Protection of Aquatic Ecosystems held in Hong Kong in December 2011, an expert group, comprising scientists, government officials, and consultants from four continents, was formed to discuss the important scientific and regulatory challenges with developing sediment quality guidelines (SQGs). We identified the problems associated with SQG development and made a series of recommendations to ensure that the methods being applied were scientifically defensible and internationally applicable. This document summarizes the key findings from the expert group. To enable evaluation of current SQG derivation and application systems, a feedback mechanism is required to communicate confounding factors and effects in differing environments, while field validation is necessary to gauge the effectiveness of SQG values in sediment quality assessments. International collaboration is instrumental to knowledge exchange and method advancement, as well as promotion of ‘best practices’. Since the paucity of sediment toxicity data poses the largest obstacle to improving current SQGs and deriving new SQGs, a standardized international database should be established as an information resource for sediment toxicity testing and monitoring data. We also identify several areas of scientific research that are needed to improve sediment quality assessment, including determining the importance of dietary exposure in sediment toxicity, mixture toxicity studies, toxicity screening of emerging chemicals, how climate change influence sediments and its biota, and possible use of new toxicity study approaches such as high throughput omic-based toxicity screenings.     

Characterization of heavy metal concentrations in the sediments of three freshwater rivers in Huludao City, Northeast China

Wuli River, Cishan River, and Lianshan River are three freshwater rivers flowing through Huludao City, in a region of northeast China strongly affected by industrialization. Contamination assessment has never been conducted in a comprehensive way. For the first time, the contamination of three rivers impacted by different sources in the same city was compared. This work investigated the distribution and sources of Hg, Pb, Cd, Zn and Cu in the surface sediments of Wuli River, Cishan River, and Lianshan River, and assessed heavy metal toxicity risk with the application of two different sets of Sediment Quality Guideline (SQG) indices (effect range low/effect range median values, ERL/ERM; and threshold effect level/probable effect level, TEL/PEL). Furthermore, this study used a toxic unit approach to compare and gauge the individual and combined metal contamination for Hg, Pb, Cd, Zn and Cu. Results showed that Hg contamination in the sediments of Wuli River originated from previous sediment contamination of the chlor-alkali producing industry, and Pb, Cd, Zn and Cu contamination was mainly derived from atmospheric deposition and unknown small pollution sources. Heavy metal contamination to Cishan River sediments was mainly derived from Huludao Zinc Plant, while atmospheric deposition, sewage wastewater and unknown small pollution were the primary sources for Lianshan River. The potential acute toxicity in sediment of Wuli River may be primarily due to Hg contamination. Hg is the major toxicity contributor, accounting for 53.3-93.2%, 7.9-54.9% to total toxicity in Wuli River and Lianshan River, respectively, followed by Cd. In Cishan River, Cd is the major sediment toxicity contributor, however, accounting for 63.2-66.9% of total toxicity.     

Accumulation and histopathological damage in the clam Ruditapes philippinarum and the crab Carcinus maenas to assess sediment toxicity in Spanish ports

The degree of contamination and toxicity in sediment from four Spanish ports (Cádiz, Huelva, Pasajes and Bilbao) was assessed in the present study. Two marine invertebrate species, the shore crab Carcinus maenas and the clam Ruditapes philippinarum, were exposed to the different sediments under laboratory conditions for 28 days. Relationships were developed among metal contamination (As, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb and Zn) in sediments, metal accumulation in gill tissues and histopathological lesions in different biological tissues to assess sediment toxicity. A multivariate analysis approach was used to calculate sediment quality guidelines (SQGs) by linking metal concentration in sediments with histopathological lesions measured in the exposed organisms. The results showed significant contaminant accumulation and histopathological lesions due to As, Pb and Zn in sediments at the port of Huelva; As, Cr, Cu, Hg and Ni at the ports of Pasajes and Cádiz; and Cr and Hg at the port of Bilbao. The link between chemical concentration in sediments and histopathological lesions allowed the determination of SQGs for the chemicals As, Cd, Cu, Cr, Hg, Ni and Zn.     

Inconsistency and comprehensiveness of risk assessments for heavy metals in urban surface sediments

Numerous indices have been developed to assess environmental risk of heavy metals in surface sediments, including the total content based geoaccumulation index (I_geo), exchangeable fraction based risk assessment code (RAC), and biological toxicity test based sediment quality guidelines (SQGs). In this study, the three indices were applied to freshwater surface sediments from 10 sections along an urbanization gradient of the Grand Canal, China to assess the environmental risks of heavy metals (Cu, Pb, Zn, Cd, and Cr) and to understand discrepancies of risk assessment indices and urbanization effects regarding heavy metal contamination. Results showed that Cd, Zn, and Pb were the most enriched metals in urban sections assessed by I_geo and over 95% of the samples exceeded the Zn and Pb thresholds of the effect range low (ERL) of SQGs. According to RAC, Cu, Zn, Cd, and Cr had high risks of adversely affecting the water quality of the Grand Canal due to their remarkable portions of exchangeable fraction in surface sediment. However, Pb showed a relative low risk, and was largely bounded to Fe/Mn oxides in the urban surface sediments. Obviously, the three assessment indices were not consistent with each other in terms of predicting environmental risks attributed to heavy metals in the freshwater surface sediments of this study. It is recommended that risk assessment by SQGs should be revised according to availability and site specificity. However, the combination of the three indices gave us a comprehensive understanding of heavy metal risks in the urban surface sediments of the Grand Canal.     

Guidelines for copper in sediments with varying properties

A major weakness of sediment quality guidelines (SQGs) is their poor ability to predict how toxicity thresholds change for different sediment types. Using species sensitivity distributions (SSDs) of copper effects data, new guidelines were derived for copper in non-sulfidic marine sediments in which organic carbon (OC) and particle size strongly influence copper bioavailability. The derived SQGs varied in a predictable manner with changes in sediment particle size and organic carbon (OC), and were shown to offer a significant improvement on the existing ‘single value’ SQG. Adequate protection for all benthic organisms is expected to be achieved for a OC-normalised copper concentration of 3.5 mg Cu g⁻¹ OC in the <63 μm sediment fraction. For short-term exposures, the equivalent acute guideline is 11 mg < 63 μm Cu g⁻¹ OC. The new SQGs incorporate a high degree of conservatism owing to the use of copper-spiked sediments and laboratory-based bioassays that were expected to result in greater metal exposure of organisms to bioavailable copper than would be expected for field-contaminated sediments with similar total copper concentrations. SQGs that vary with sediment properties were prepared in an easily referenced tabular format.     

Impacts of urbanization on surface sediment quality: evidence from polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) contaminations in the Grand Canal of China

Introduction

Organic pollutants, especially synthetic organic compounds, can indicate paces of anthropogenic activities. Effects of urbanization on polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) distributions in surface sediment were conducted in urban sections of the Grand Canal, China, consisting of a four-level urbanization gradient.

Materials and methods

The four-level urbanization gradients include three countryside towns, two small-size cities, three medium-size cities, and a large-size city. Diagnostic ratio analysis and factor analysis?Cmultiple linear regression model were used for source apportionment of PAHs. Sediment quality guidelines (SQGs) of USA and Canada were employed to assess ecological risks of PAHs and PCBs in surface sediments of the Canal.

Results and discussion

Ranges of PAH and PCB concentrations in surface sediments were 0.66?C22?mg/kg and 0.5?C93???g/kg, respectively. Coal-related sources were primary PAH sources and followed by vehicular emission. Total concentration, composition, and source apportionment of PAHs exhibited urbanization gradient effects. Total PCB concentrations increased with the urbanization gradient, while total PAHs concentration in surface sediments presented an inverted U Kuznets curve with the urbanization gradient. Elevated concentrations of both PAHs and PCBs ranged at effect range low levels or interim SQG, assessed by USA and Canadian SQGs.

Conclusions

PAHs and PCBs in surface sediments of the Grand Canal showed urbanization gradient effects and low ecological risks.     

Pharmaceuticals in the aquatic environment--a comparison of risk assessment strategies

The growing concern over the release of pharmaceutically active compounds and personal care products into the environment has prompted the introduction of risk assessment guidelines in both the European Union by the European Medicines Evaluation Agency (EMEA) and in the United States by the Food and Drug Administration (FDA), details of which are presented herein. Both employ a similar tiered system that compares the predicted environmental concentrations (PEC) with the worst-case no effect concentrations estimated from standard toxicity assays. These approaches are compared and contrasted. Results demonstrate room for improvement in areas such as the use of threshold values to trigger investigations, chronic and mechanism specific toxicity screening and mixture toxicity for which possible solutions are proposed.     

Assessment of the environmental significance of heavy metal pollution in surficial sediments of the River Po

The magnitude and ecological relevance of metal pollution of the middle Po river deriving from the River Lambro tributary was investigated by applying different (complementary) sediment quality assessment approaches: (1) comparisons of concentrations with regional reference data, and (2) comparisons with consensus-based sediment quality guidelines (SQGs), as well as by investigations of the partitioning patterns of target heavy metals (Cd, Cu, Ni, Pb, Zn). Total metal concentrations in the surficial sediments revealed significant pollution inputs on the whole river stretch investigated, with a distinct peak at the inlet of the River Lambro. Based on the geoaccumulation index of target heavy metals, the middle reach of River Po has to be considered as moderately polluted with Cd (1相似文献   

Ecological risk assessment of arsenic and metals in sediments of coastal areas of northern Bohai and Yellow Seas, China

Distributions of arsenic and metals in surface sediments collected from the coastal and estuarine areas of the northern Bohai and Yellow Seas, China, were investigated. An ecological risk assessment of arsenic and metals in the sediments was evaluated by three approaches: the Sediment Quality Guidelines (SQGs) of the United States Environmental Protection Agency (USEPA), the degree of contamination, and two sets of SQGs indices. Sediments from the estuaries of the Wuli and Yalu Rivers contained some of the greatest concentrations of arsenic, cadmium, copper, mercury, lead, and zinc. Median concentrations of cadmium and mean concentrations of lead and zinc were greater than background concentrations determined for the areas. All sediments were considered to be heavily polluted by arsenic, but moderately polluted by chromium, lead, and cadmium. Current concentrations of arsenic and metals are unlikely to be acutely toxic, but chronic exposures would be expected to cause adverse effects on benthic invertebrates at 31.4% of the sites.     

Spatial variation of organochlorine pesticides and dissolved organic matter in urban closed lakes

Abstract

Closed lakes located in urban parks act as sinks of organochlorine pesticides (OCPs), which have been used, for decades, as insecticides, herbicides and fungicides. The closed lakes from Bucharest, Romania, are periodically managed to prevent eutrophication and accumulation of pollutants. However, it is not known if these practices reduce or enhance the legacy pollution with OCPs. The aim of this study was to explore the spatial variation of OCPs in closed lakes. The total concentration of OCPs in water and sediments ranged between 0.0176 and 37.1?µg/L, and between 122 to 1,890?ng/g, respectively. The concentrations of OCPs were compared with the consensus-based sediment quality guidelines (SQGs) in order to evaluate the ecological risks of sediments. The highest potential adverse effects were associated with γ-HCH exposure. Periodical draining and dredging of lakes lead to the resuspension of contaminants, increasing pesticide bioavailability and accumulation in sediments. In addition, we observed that fluorescent dissolved organic matter (DOM) might influence the OCPs cycle. The quantity and character of fluorescent DOM can provide further insight into OCPs degradation. Also, this study may help urban planners to determine the state of urban waters and to find the best solution for water management.     

Interactions between a polycyclic aromatic hydrocarbon mixture and the microbial communities in a natural freshwater sediment

The toxicity of a polycyclic aromatic hydrocarbon (PAH) mixture was assessed on the indigenous microbial communities of a natural freshwater sediment. The fate and effects of the PAH mixture (phenanthrene, fluoranthene and benzo(k)fluoranthene) were studied over 28 days. Bacterial communities were described by bacterial counts (total bacteria and viable bacteria), and by some hydrolytic enzyme activities (beta-glucosidase and leucine-aminopeptidase), PAH concentrations were measured in the overlying waters and in the sediments. No effect of PAH was detected at 30 mg/kg for all bacterial parameters. At 300 mg/kg, the quantity of total bacteria and the proportion of viable bacteria markedly decreased, compared to the control (0 mg PAH/kg). At 300 mg/kg, an increase of the beta-glucosidase activity and a decrease of the leucine-aminopeptidase activity were observed. For all treatments, the benzo(k)fluoranthene concentration in the sediment was stable over 28 days whereas, in the same time, only 3-6% of the initial concentrations of phenanthrene and fluoranthene remained. This study shows that (1) PAH induce perturbations of sediment microbial communities in terms of density and metabolism (but not always as an inhibition), (2) indigenous bacteria of sediments might be used for toxicity assessment of specific organic pollutants, (3) native microorganisms of sediment seem to have a high capacity for PAH degradation, depending on the physico-chemical properties and the bioavailability of the substance encountered.     

Development of freshwater sediment management standards for organic matters, nutrients, and metals in Korea

Korean water quality managers are required to promptly develop national assessment standards for freshwater sediment quality due to the Four Major River Restoration Project in Korea in 2009. We conducted this study to develop sediment management standards (SMSs), determining obviously and severely polluted sediment, which could have adverse impacts on water quality and aquatic ecosystem. The SMSs values were derived from the 95th percentile of concentration distribution for organic matter and nutrients in sediment quality database. For the SMSs of metals, foreign sediment quality guidelines (SQGs) were adopted. As a result, 13 % for loss on ignition (LOI), 1,600 mg/kg for total phosphorus (TP), and 5,600 mg/kg for total nitrogen (TN) were set as the SMSs for freshwater sediment in Korea. These values were higher than the range of heavily polluted sediment from USEPA Region 5 guideline derived by the similar approaches for the Great Lakes harbor sediments, and similar or lower than the severe effect level (SEL) from provincial sediment quality guideline (PSQG) of Ontario, Canada by screening level concentration (SLC) approach. However, SMSs in the present study are appropriate considering the concentration ranges and the Korean SMSs’ definition for freshwater sediments in Korea. The Puget Sound marine sediment cleanup screening level (CSL) in Washington State, USA were adopted as the Korean SMSs for As (93 mg/kg), Cd (6.7 mg/kg), Cr (270 mg/kg), Cu (390 mg/kg), Pb (530 mg/kg), and Zn (960 mg/kg) in freshwater sediments. Hg concentration (0.59 mg/kg) of CSL was too low to determine the polluted freshwater sediments in Korea, and the SEL of Ontario, Canada for mercury concentration (2 mg/kg) was selected as the SMS for Hg. These values were found reasonable through the assessment of applicability with the datasets from locations directly affected by obvious point sources. These results indicate that SMSs for organic matter, nutrient, and metals derived within the present study can successfully determine obviously and severely polluted sediment in Korea. However, the SMSs have limits to specifically determine the effects of polluted sediment on water quality and aquatic ecosystem in Korea. Thus, we will revise and specify SMSs considering those effects and further sediment quality assessment framework in the near future.     

Concentrations,spatial distribution,and pollution assessment of heavy metals in surficial sediments from upstream of Yellow River,China

Surface sediments were collected from 122 sites in the upstream of the Yellow River, China. The concentration of Fe, Mn, Cu, Ni, Zn, Cr, Pb, and Cd in sediments was investigated to explore the spatial distribution based on statistics and interpolation method. The results suggested that the concentrations of heavy metals were lower than potential effect levels (PEL). The samples above threshold effect level (TEL) for Pb and Zn were less than 10%, while almost 50% of samples for Ni exceeded PEL. Pb and Zn in sediments performed little or no adverse effects on the aquatic ecosystems. Higher concentrations of all heavy metals occurred in Qinghai and Gansu sections; the concentrations of Cu, Ni, and Zn were significantly higher than the Inner Mongolia section. Lower concentration of Fe, Mn, Cu, Ni, and Zn appeared in Qinghai section; the concentrations of Fe, Mn, Cr, and Pb manifested relatively steady and similar distributions and approximately decreasing tendency along the upstream of Yellow River.

     

Tidal salt marsh sediment in California, USA: part 3. Current and historic toxicity potential of contaminants and their bioaccumulation

To assess potential health risks to benthic organisms from exposure to toxic contaminants, sediment chemistry data from five salt marshes along the coast of California were compared with threshold effects levels (TELs) and probable effects levels (PELs). As an integrated estimate of toxicity potential of multiple contaminants, mean PEL quotients (mPELQs) were used to categorize sampling stations into three groups: high (>0.5), medium (0.1–0.5) and low (<0.1). In all sediments from Stege Marsh located in San Francisco Bay, at least one contaminant exceeded PELs by up to 18-fold and mPELQs were higher than 0.7. Mean PELQs in two core sediments from eastern Stege Marsh ranged from 0.7 to 2.1, indicating that benthic organisms in Stege Marsh may have been adversely affected for several decades. To investigate bioavailability and bioaccumulation of contaminants in sediments, longjaw mudsuckers (Gillichthys mirabilis) were transplanted to six Stege Marsh stations for 60 days. Body burdens of organic contaminants clearly showed that they were readily available for benthic organisms. Measured concentrations of organic contaminants in mudsuckers were similar to estimated levels computed using a theoretical bioaccumulation potential model. Levels of PCBs and arsenic in mudsuckers were higher than screening values set as guidelines for the protection of humans and levels of PCBs and DDTs were higher than criteria for wildlife. The results of this study indicate that the levels of contaminants in Stege Marsh sediments may not fully support the well-being of benthic organisms and also may provoke adverse effects on fish-eating animals and humans through trophic transfer.     

A mathematical algorithm to identify toxicity and prioritize pollutants in field sediments

In order to evaluate sediment toxicity, a mathematical algorithm was developed to compute the toxicity of multiple component mixtures acting in an additive manner. A statistical approach was devised to determine the presence of potential interactive effects among mixture components. The algorithm uses three kinds of data to obtain an integrative approach to sediment toxicity assessment: Microtox toxicity data (EC50 values), sediment pollutant concentration measurements, and sequential extraction (SEQ) data to investigate metal partitioning. To simplify the analysis of complex mixtures using a prioritization scheme based on intrinsic toxicity and relative abundance, a toxicity index (TI) was employed as an indicator of adverse ecological impact. In general, the ranking of contaminants using the TI approach was found to be most efficient in reducing computational time, and concentrations using bioavailability data from SEQ was found to be the best theoretical predictor of the experimental mixture toxicity value. Only a few pollutants that were present at the greatest abundance were needed to provide a good approximation of the calculated EC50 found when all components were included. Not only does this substantially reduce the computational time needed to determine the EC50, it could in some cases dramatically reduce the pollutant monitoring effort required to track toxicity effectively. This approach would have substantial implications for both risk assessment and for remediation strategies, making them more efficient by focusing on the priority pollutants identified.     

Incorporating bioavailability into management limits for copper in sediments contaminated by antifouling paint used in aquaculture

Although now well embedded within many risk-based sediment quality guideline (SQG) frameworks, contaminant bioavailability is still often overlooked in assessment and management of contaminated sediments. To optimise management limits for metal contaminated sediments, we assess the appropriateness of a range methods for modifying SQGs based on bioavailability considerations. The impairment of reproduction of the amphipod, Melita plumulosa, and harpacticoid copepod, Nitocra spinipes, was assessed for sediments contaminated with copper from antifouling paint, located below aquaculture cages. The measurement of dilute acid-extractable copper (AE-Cu) was found to provide the most useful means for monitoring the risks posed by sediment copper and setting management limits. Acid-volatile sulfide was found to be ineffective as a SQG-modifying factor as these organisms live mostly at the more oxidised sediment water interface. SQGs normalised to %-silt/organic carbon were effective, but the benefits gained were too small to justify this approach. The effectiveness of SQGs based on AE-Cu was attributed to a small portion of the total copper being present in potentially bioavailable forms (typically <10% of the total). Much of the non-bioavailable form of copper was likely present as paint flakes in the form of copper (I) oxide, the active ingredient of the antifoulant formulation. While the concentrations of paint-associated copper are very high in some sediments, as the transformation of this form of copper to AE-Cu appears slow, monitoring and management limits should assess the more bioavailable AE-Cu forms, and further efforts be made to limit the release of paint particles into the environment.     

A comparison of five rapid direct toxicity assessment methods to determine toxicity of pollutants to activated sludge

Five rapid direct toxicity assessment methods were used in three European partner countries to determine the toxicity of single toxicants, mixed toxicants and real industrial wastes. The final aim was to protect microbial degradation of organic wastes in biological treatment processes and hence enhance the quality of treated effluents to be discharged to the environment. Nitrification inhibition, Respirometry, Adenosine triphosphate luminescence and Enzyme inhibition were tested utilising activated sludge as the testing matrix. The Vibrio fischeri toxicity test was used as a surrogate to compare the various microbial bioassays. The IC50 (toxicant concentration eliciting a 50% inhibitory effect) was determined for a number of pollutants including single toxicants Cd, Cr, Cu, Zn, 3,5-dichlorophenol, toluene and linear alkylbenzenesulphonate (LAS); a standard mixture of metals and LAS; a standard mixture of organics and LAS, and 16 industrial effluents. The V. fischeri bioassay was also chosen in order to assess quality control of toxicant preparation during testing in the different laboratories of the partner countries. Comparisons of sensitivity, cost of implementation, cost per test, relevance, and ease of use were made. The most sensitive bioassays were V. fischeri and Nitrification inhibition, however, this depended in the main on the pollutant and mixtures tested. It is recommended that during assessment of wastewater toxicity a suite of tests be used rather than reliance on one particular test.     

The toxicity of composted sediments from Mediterranean ports evaluated by several bioassays

This work investigates the ecotoxicological evaluation of contaminated dredged sediments from French Mediterranean navy harbour (A), commercial port (B) and two composite specimens (C) and (D) coming from the mixture of A and B with other port sediments. The toxicity of elutriates from these sediments is estimated using embryo-toxicity test, Microtox® solid phase test, LuminoTox, phytotoxicity tests and genotoxicity test. Bioassay responses are not clearly correlated with chemical contamination in the whole sediment and vary as a function of tested organisms. The highest contaminated samples (A and C) are almost always more toxic than the less contaminated samples (B and D). Among composite sediments, the mixture effect with other sediments is not efficient to decrease toxicity in sample C, suggesting that other parameters influence toxicity level such as particle size or organic matter content. These parameters should be taken into consideration in order to improve the efficiency of the mixture process and produce composite sediments with low toxicity.