Methods to alleviate the inhibition of sludge anaerobic digestion by emerging contaminants: a review

The rising occurrence of emerging contaminants in sludges both inhibits the anaerobic digestion of sludges and induces health issues when sludges are recycled in agriculture, calling for methods to remove contaminants. Here we review emerging pollutants in wastewater treatment plants, before and after anaerobic digestion. We present their inhibitory effects and remediation methods to alleviate inhibition. Pharmaceuticals have been detected in about 50% of the sludge samples. Sewage sludge contaminants include 19% of diuretics, 16–21% of lipid-modifying agents, hydrochlorothiazide, diclofenac, furosemide, clarithromycin, atorvastatin, and carbamazepine. Levels of antibiotics, azithromycin, ciprofloxacin, and estrone range from 500 to 600 ng/g in sludges from wastewater treatment plants. Remediation methods comprise electrooxidation, ultrasonication, thermal hydrolysis, ozonation, and bioaugmentation. Fermenting the sludges with acidogenic bacteria reduces the level of emerging pollutants in the supernatant. Nonetheless, liquid digestates still contains emerging pollutants such as sunscreen octocrylene at 147 ug/L and acetaminophen at 58.6 ug/L. As a result, pretreatment of sludge containing emerging pollutants is required.

     

Methods to prepare biosorbents and magnetic sorbents for water treatment: a review

Access to drinkable water is becoming more and more challenging due to worldwide pollution and the cost of water treatments. Water and wastewater treatment by adsorption on solid materials is usually cheap and effective in removing contaminants, yet classical adsorbents are not sustainable because they are derived from fossil fuels, and they can induce secondary pollution. Therefore, biological sorbents made of modern biomass are increasingly studied as promising alternatives. Indeed, such biosorbents utilize biological waste that would otherwise pollute water systems, and they promote the circular economy. Here we review biosorbents, magnetic sorbents, and other cost-effective sorbents with emphasis on preparation methods, adsorbents types, adsorption mechanisms, and regeneration of spent adsorbents. Biosorbents are prepared from a wide range of materials, including wood, bacteria, algae, herbaceous materials, agricultural waste, and animal waste. Commonly removed contaminants comprise dyes, heavy metals, radionuclides, pharmaceuticals, and personal care products. Preparation methods include coprecipitation, thermal decomposition, microwave irradiation, chemical reduction, micro-emulsion, and arc discharge. Adsorbents can be classified into activated carbon, biochar, lignocellulosic waste, clays, zeolites, peat, and humic soils. We detail adsorption isotherms and kinetics. Regeneration methods comprise thermal and chemical regeneration and supercritical fluid desorption. We also discuss exhausted adsorbent management and disposal. We found that agro-waste biosorbents can remove up to 68–100% of dyes, while wooden, herbaceous, bacterial, and marine-based biosorbents can remove up to 55–99% of heavy metals. Animal waste-based biosorbents can remove 1–99% of heavy metals. The average removal efficiency of modified biosorbents is around 90–95%, but some treatments, such as cross-linked beads, may negatively affect their efficiency.

     

Electrochemical treatment of wastewater to remove contaminants from the production and disposal of plastics: a review

Wastewater is major source of contaminants originating from the production, usage, and disposal of plastic materials. Due to their poor biodegradability of these contaminants in municipal wastewater treatment plants, additional advanced oxidation processes such as electrochemical treatments have been developed to improve the standard biological treatment. Here we review the applications of electrochemical treatments of wastewater for the removal of the following plastic contaminants: bisphenol A, phthalic acid esters, and benzotriazoles. We present the effectiveness of treatment in terms of contaminant removal and mineralization; the identification of transformation products; toxicity assessment; and process energy requirements. In the present review, we have focused on the applications of electrochemical treatments of wastewater for the removal of three important groups of contaminants originating mainly from plastics: bisphenol A, phthalic acid esters, and benzotriazoles. The review focuses on the research of electrochemical treatments for these contaminants from the last five years. The papers are assessed from the point of i) effectiveness of treatment in terms of contaminant removal and mineralization; ii) identification of transformation products; iii) toxicity assessment; iv) processes’ energy requirements. Electrochemical treatments were confirmed to be a viable option for the removal of selected contaminants from wastewater.

     

Synthesis and application of titanium dioxide photocatalysis for energy,decontamination and viral disinfection: a review

Environmental Chemistry Letters - Global pollution is calling for advanced methods to remove contaminants from water and wastewater, such as TiO2-assisted photocatalysis.  The...     

The use of algae to control heavy metals in the environment

Aqueous effluents from a lead mining and milling operation located in southeastern Missouri, USA, caused a degradation of stream quality despite treatment by a large tailings pond. The receiving stream was choked with algal mats which accumulated unexpectedly large amounts of manganese, lead and zinc. A wastewater treatment system was designed to utilize algae and benthic macrophytes to remove metals from the tailings pond effluent. The system has proved successful and water quality in the receiving stream has been improved to drinking water standards.Experiments were conducted to understand more fully the phenomenon of heavy metal accumulation by algae. Radionuclides (²¹⁰Pb,²⁰³Hg,⁶⁵Zn,¹⁰⁹Cd) were used in conjunction with commercially available microculture apparatus to screen several species of algae for heavy metal accumulation. It was found that all species of algae studied concentrated mercury, green algae were more efficient accumulators of cadmium than blue-green algae, one alga (Chlamydomonas) proved best at removing lead from solution and no alga studied removed zinc.     

Multi-metal resistance and plant growth promotion potential of a wastewater bacterium Pseudomonas aeruginosa and its synergistic benefits

Water and soil pollution by toxic heavy metals (HMs) is increasing globally because of increase in population, industrialization and urbanization. It is a burning problem for the public, scientists, academicians and politicians how to tackle the toxic contaminants which jeopardize the environment. One possible solution for pollution abatement is a bioremediation-effective and innovative technology that uses biological systems for treatment of contaminants. Many bacteria synthesize indole-3-acetic acid (IAA) which is a product of l-tryptophan metabolism and belongs to the auxin class of plant growth-promoting hormone. The present study aimed at assessing the resistance pattern of wastewater bacteria against multiple HMs and plant growth promotion activity associated with IAA. A Gram-negative bacterial strain Pseudomonas aeruginosa KUJM was isolated from Kalyani Sewage Treatment Plant. This strain showed the potential to tolerate multiple contaminations such as As(III) (50 mM), As(V) (800 mM), Cd (8 mM), Co (18 mM), Cu (7 mM), Cr (2.5 mM), Ni (3 mM) and Zn (14 mM). The capability of IAA production at different tryptophan concentration (1, 2, 5 and 10 mg mL⁻¹) was determined, and seed germination-enhancing potential was also estimated on lentil (Lens culinaris). Such type of HM-resistant, IAA-producing and seed germination-enhancing P. aeruginosa KUJM offer great promise as inoculants to promote plant growth in the presence of toxic HMs, as well as plant inoculant systems useful for phytoremediation of polluted soils. Hence, P. aeruginosa KUJM finds significant applications in HM-contaminated poor agricultural field as well as in bioremediation of HM-contaminated wastewater system.

     

Microbiological degradation of polycyclic aromatic hydrocarbons: Anthracene,benzo(K)fluoranthene,dibenzothiophene, benzo(H) quinoline and 2‐nitronaphthalene

Biodegradation experiments of various polycyclic aromatic hydrocarbons were studied with mixed bacteria culture under aerobic conditions. An easy‐to‐handle clean‐up procedure was developed for PAH and their metabolites simultaneously as well as a gc‐ms‐method to identify and quantify these compounds.

Anthracene and dibenzothiophene are completely degradable in an aqeous system, whereas biodegradation of benzo(k)fluoranthene and benzo(h)quinoline is possible only in an oil‐in‐water‐system with dodecane as cosubstrate. No degradation of nitronaphthalene was observed in aqueous systems. New metabolites are 2,3‐dihydroxybenzothiophene, hydroxybenzothiophenecarbonic acid and benzothiophenequinone for dibenzothiophene and hydroxyfluoranthenic acid for benzo(k)flouranthene. Whereas the former metabolites are degradable under the experimental conditions, the latter accumulates during the degradation experiment.

The results are important for microbiological wastewater treatment, since knowledge of biodegradation processes is indespensable for the successful treatment of PAH‐containing wastewater.     

制药废水的可生物降解性与生物毒性研究

制药废水有机物含量高,难生物降解成分多,有些成分可抑制污泥活性或具有生物毒性.以某制药企业维生素生产的7个工段(W1 ～ W7)的排放废水为研究对象,用摇瓶试验评价了各工段废水的可生物降解性能,用瓦勃氏呼吸仪测试了各工段废水对污泥活性的抑制作用,用发光菌急性毒性试验评价了各工段废水经好氧生物处理前后的生物毒性变化.研究...     

Removal and recovery of vanadium from waste by chemical precipitation,adsorption, solvent extraction,remediation, photo-catalyst reduction and membrane filtration. A review

At low concentrations, vanadium is essential for cell growth, yet vanadium is harmful to human beings, animals and plants at high concentrations. Therefore, vanadium should be removed from wastewater and solid waste to avoid pollution and to recycle vanadium in the context of the circular economy. Here we review aqueous vanadium species and techniques to remove vanadium such as adsorption, remediation, chemical precipitation, solvent extraction, photo-catalyst reduction and membrane filtration.

     

Biocatalytic polymeric membranes to decrease biofilm fouling and remove organic contaminants in wastewater: a review

The presence of recalcitrant contaminants in wastewater is major challenge to decrease pollution and associated health issues. As a consequence, membrane technologies have recently attracted industrial attention, yet a major setback of membrane employment is membrane fouling which leads to frequent discarding of membrane modules. More than 45% of all membrane fouling cases are caused by biofilms that are resistant to antimicrobial agents. Here we review polymeric membranes with antifouling properties, with focus on surface properties, fabrication, characterization, biocatalysis using enzymes and application towards the removal of dyes, phenol, pesticides and fertilizers. Nano-engineered fabrication of polymeric membranes allow to decrease fouling by 80–90%. Immobilized oxidoreductases in polymeric membranes allow 65–98% removal contaminants in wastewater.

     

Fate and risk assessment of emerging contaminants in reclaimed water production processes

• PPCPs had the highest removal efficiency in A²O combined with MBR process (86.8%). • ARGs and OPFRs were challenging to remove (6.50% and 31.0%, respectively). • Octocrylene and tris(2-ethylhexyl) phosphate posed high risks to aquatic organisms. • Meta-analysis was used to compare the ECs removal in wastewater treatment. • Membrane treatment technology is the most promising treatment for ECs removal. Reclaimed water has been widely applied in irrigation and industrial production. Revealing the behavior of emerging contaminants in the production process of reclaimed water is the first prerequisite for developing relevant water quality standards. This study investigated 43 emerging contaminants, including 22 pharmaceuticals and personal care products (PPCPs), 11 organophosphorus flame retardants (OPFRs), and 10 antibiotic resistance genes (ARGs) in 3 reclaimed wastewater treatment plants (RWTPs) in Beijing. The composition profiles and removal efficiencies of these contaminants in RWTPs were determined. The results indicated that the distribution characteristics of the different types of contaminants in the three RWTPs were similar. Caffeine, sul2 and tris(1-chloro-2-propyl) phosphate were the dominant substances in the wastewater, and their highest concentrations were 27104 ng/L, 1.4 × 10⁷ copies/mL and 262 ng/L, respectively. Ofloxacin and sul2 were observed to be the dominant substances in the sludge, and their highest concentrations were 5419 ng/g and 3.7 × 10⁸ copies/g, respectively. Anaerobic/anoxic/oxic system combined with the membrane bioreactor process achieved a relatively high aqueous removal of PPCPs (87%). ARGs and OPFRs were challenging to remove, with average removal rates of 6.5% and 31%, respectively. Quantitative meta-analysis indicated that tertiary treatment processes performed better in emerging contaminant removal than secondary processes. Diethyltoluamide exhibited the highest mass load discharge, with 33.5 mg/d per 1000 inhabitants. Octocrylene and tris(2-ethylhexyl) phosphate posed high risks (risk quotient>1.0) to aquatic organisms. This study provides essential evidence to screen high priority pollutants and develop corresponding standard in RWTPs.     

Solar photo-oxidation of recalcitrant industrial wastewater: a review

Conventional methods to clean wastewater actually lead to incomplete treatments, calling for advanced technologies to degrade recalcitrant pollutants. Herein we review solar photo-oxidation to degrade the recalcitrant contaminants in industrial wastewater, with focus on photocatalysts, reactor design and the photo-Fenton process. We discuss limitations due to low visible-light absorption, catalyst collection and reusability, and production of toxic by-products. Photodegradation of refractory organics by solar light is controlled by pH, photocatalyst composition and bandgap, pollutant properties and concentration, irradiation type and intensity, catalyst loading, and the water matrix.

     

Cultivation of microalgae on liquid anaerobic digestate for depollution,biofuels and cosmetics: a review

Solid wastes from domestic, industrial and agricultural sectors cause acute economic and environmental problems. These issues can be partly solved by anaerobic digestion of wastes, yet this process is incomplete and generates abundant byproducts as digestate. Therefore, cultivating mixotrophic algae on anaerobic digestate appears as a promising solution for nutrient recovery, pollutant removal and biofuel production. Here we review mixotrophic algal cultivation on anaerobic waste digestate with focus on digestate types and characterization, issues of recycling digestate in agriculture, removal of contaminants, and production of biofuels such as biogas, bioethanol, biodiesel and dihydrogen. We also discuss applications in cosmetics and economical aspects. Mixotrophic algal cultivation completely removes ammonium, phosphorus, 17β-estradiol from diluted digestate, and removes 62% of zinc, 84% of manganese, 74% of cadmium and 99% of copper.

     

Removal of Methylene Blue from aqueous solution by marine green alga Ulva lactuca

Biosorption of colours is an important technology for treatment of different types of industrial wastewaters containing dyes. The objective of this study was to convert green alga Ulva lactuca to dye adsorbents for wastewater treatment. The importance of commonly available green alga Ulva lactuca was investigated as viable biomaterials for the biological treatment of synthetic basic blue 9 (5-ch1oro-N,N,N^',N^'-tetramethyl-5λ⁴-phenothiazine-3,7-diamine) effluents. The results obtained from the batch experiments revealed the ability of the green algae to remove the basic blue 9, and this was dependent on the dye concentration, pH, and algal biomass. We investigated the equilibrium and kinetics of adsorption, and the Langmuir and Freundlich equations were used to fit the equilibrium isotherm. The adsorption isotherm of basic blue 9 followed both the Langmuir and Freundlich models with a correlation coefficient of ∼0.96-0.99, and the adsorption kinetics followed the pseudo-second-order model (R²=1.0). The maximum adsorption capacity was about 40.2 mg of dye per gram of dry green algae at pH 10, 25 g l^-1 dye and 2.5 g l^-1 alga concentrations. This study demonstrated that the green algae could be used as an effective biosorbent for the treatment of dye-containing wastewater streams.     

Composition,dispersion, and health risks of bioaerosols in wastewater treatment plants: A review

• Bioaerosols are produced in the process of wastewater biological treatment. • The concentration of bioaerosol indoor is higher than outdoor. • Bioaerosols contain large amounts of potentially pathogenic biomass and chemicals. • Inhalation is the main route of exposure of bioaerosol. • Both the workers and the surrounding residents will be affected by the bioaerosol. Bioaerosols are defined as airborne particles (0.05–100 mm in size) of biological origin. They are considered potentially harmful to human health as they can contain pathogens such as bacteria, fungi, and viruses. This review summarizes the most recent research on the health risks of bioaerosols emitted from wastewater treatment plants (WWTPs) in order to improve the control of such bioaerosols. The concentration and size distribution of WWTP bioaerosols; their major emission sources, composition, and health risks; and considerations for future research are discussed. The major themes and findings in the literature are as follows: the major emission sources of WWTP bioaerosols include screen rooms, sludge-dewatering rooms, and aeration tanks; the bioaerosol concentrations in screen and sludge-dewatering rooms are higher than those outdoors. WWTP bioaerosols contain a variety of potentially pathogenic bacteria, fungi, antibiotic resistance genes, viruses, endotoxins, and toxic metal(loid)s. These potentially pathogenic substances spread with the bioaerosols, thereby posing health risks to workers and residents in and around the WWTP. Inhalation has been identified as the main exposure route, and children are at a higher risk of this than adults. Future studies should identify emerging contaminants, establish health risk assessments, and develop prevention and control systems.     

固定化藻菌对水产养殖废水氮、磷的去除效果

对比研究了藻菌混合包埋(MI)和藻菌分层包埋SI1(藻外菌内)、SI2(藻内菌外)固定化藻菌对养殖废水中氮、磷的去除效果,以及光照、温度对3种处理脱氮去磷的影响。试验结果表明,在设计条件下处理72 h MI与SI2对氮的去除率分别为91.20%和90.77%,显著高于SI1。MI与SI1的去磷效果显著强于SI2,处理72 h后2者对磷的去除率分别为90.31%和84.78%,SI2仅为32.09%。当[光]照度6 000 lx时,SI2氮去除率在88%以上,显著高于MI与SI1;[光]照度6 000 lx时,SI2与MI对氮的去除率均高于89%,显著高于SI1。MI与SI1对磷的去除率在85%以上,显著高于SI2。MI、SI1、SI2去除氮、磷的最佳温度为20~30℃。     

A review on anammox process for the treatment of antibiotic-containing wastewater: Linking effects with corresponding mechanisms

• Anammox is promising for nitrogen removal from antibiotic-containing wastewater. • Most antibiotics could inhibit the anammox performance and activity. • Antibiotic pressure promoted the increase in antibiotic resistance genes (ARGs). • Antibiotic-resistance mechanisms of anammox bacteria are speculated. Antibiotic is widely present in the effluent from livestock husbandry and the pharmaceutical industry. Antibiotics in wastewater usually have high biological toxicity and even promote the occurrence and transmission of antibiotic resistant bacteria and antibiotic resistance genes. Moreover, most antibiotic-containing wastewater contains high concentration of ammonia nitrogen. Improper treatment will lead to high risk to the surrounding environment and even human health. The anaerobic ammonium oxidation (anammox) with great economic benefit and good treatment effect is a promising process to remove nitrogen from antibiotic-containing wastewater. However, antibiotic inhibition has been observed in anammox applications. Therefore, a comprehensive overview of the single and combined effects of various antibiotics on the anammox system is conducted in this review with a focus on nitrogen removal performance, sludge properties, microbial community, antibiotic resistance genes and anammox-involved functional genes. Additionally, the influencing mechanism of antibiotics on anammox consortia is summarized. Remaining problems and future research needs are also proposed based on the presented summary. This review provides a better understanding of the influences of antibiotics on anammox and offers a direction to remove nitrogen from antibiotic-containing wastewater by the anammox process.     

Arsenic uptake by plants and possible phytoremediation applications: a brief overview

This review focuses the behaviour of arsenic in plant?Csoil and plant?Cwater systems, arsenic?Cplant cell interactions, phytoremediation, and biosorption. Arsenate and arsenite uptake by plants varies in different environment conditions. An eco-friendly and low-cost method for arsenic removal from soil?Cwater system is phytoremediation, in which living plants are used to remove arsenic from the environment or to render it less toxic. Several factors such as soil redox conditions, arsenic speciation in soils, and the presence of phosphates play a major role. Translocation factor is the important feature for categorising plants for their remediation ability. Phytoremediation techniques often do not take into account the biosorption processes of living plants and plant litter. In biosorption techniques, contaminants can be removed by a biological substrate, as a sorbent, bacteria, fungi, algae, or vascular plants surfaces based on passive binding of arsenic or other contaminants on cell wall surfaces containing special active functional groups. Evaluation of the current literature suggests that understanding molecular level processes, and kinetic aspects in phytoremediation using advanced analytical techniques are essential for designing phytoremediation technologies with improved, predictable remedial success. Hence, more efforts are needed on addressing the molecular level behaviour of arsenic in plants, kinetics of uptake, and transfer of arsenic in plants with flowing waters, remobilisation through decay, possible methylation, and volatilisation.     

Conducting polymers/zinc oxide-based photocatalysts for environmental remediation: a review

The accessibility to clean water is essential for humans, yet nearly 250 million people die yearly due to contamination by cholera, dysentery, arsenicosis, hepatitis A, polio, typhoid fever, schistosomiasis, malaria, and lead poisoning, according to the World Health Organization. Therefore, advanced materials and techniques are needed to remove contaminants. Here, we review nanohybrids combining conducting polymers and zinc oxide for the photocatalytic purification of waters, with focus on in situ polymerization, template synthesis, sol–gel method, and mixing of semiconductors. Advantages include less corrosion of zinc oxide, less charge recombination and more visible light absorption, up to 53%.

     

Mechanistic insight into the biofilm formation and process performance of a passive aeration ditch (PAD) for decentralized wastewater treatment

• A Passive Aeration Ditch was developed to treat decentralized wastewater. • A model was developed to describe the process performance. • A high C/N ratio facilitates microbial growth but nitrification deteriorates. • A high salinity decreases both organic and nitrogen contaminants removal. Decentralized wastewater containing elevated salinity is an emerging threat to the local environment and sanitation in remote coastal communities. Regarding the cost and treatment efficiencies, we propose a passive aeration ditch (PAD) using non-woven polyester fabric as a feasible bubbleless aerator and biofilm carrier for wastewater treatment. Consideration has been first given to PAD’s efficacy in treating saline decentralized wastewater, and then to the impact of chemical oxygen demand-to-nitrogen (C/N) ratio and salinity on biofilm formation. A multispecies model incorporating the salinity effect has been developed to depict the system performance and predict the microbial community. Results showed that the PAD system had great capacity for pollutants removal. The biofilm thickness increased at a higher C/N ratio because of the boost of aerobic heterotrophs and denitrifying bacteria, which consequently improved the COD and total nitrogen removal. However, this led to the deterioration of ammonia removal. Moreover, while a higher salinity benefited the biofilm growth, the contaminant removal efficiencies decreased because the salinity inhibited the activity of aerobic heterotrophs and reduced the abundance of nitrifying bacteria inside the biofilm. Based on the model simulation, feed water with salinity below 2% and C/N ratio in a range of 1 to 3 forms a biofilm that can reach relatively high organic matter and ammonia removal. These findings not only show the feasibility of PAD in treatment of saline decentralized wastewater, but also offer a systematic strategy to predict and optimize the process performance.