Effects of aqueous suspensions of titanium dioxide nanoparticles on Artemia salina: assessment of nanoparticle aggregation, accumulation, and toxicity

Aquatic stability and impact of titanium dioxide nanoparticles (TiO₂ NPs, 10–30 nm) were investigated using Artemia salina. Acute exposure was conducted on nauplii (larvae) and adults in seawater in a concentration range from 10 to 100 mg/L TiO₂ NPs for 24 and 96 h. Rapid aggregation occurred in all suspensions of TiO₂ NPs to form micrometer size particles. Yet, both nauplii and adults accumulated the aggregates significantly. Average TiO₂ content in nauplii ranged from 0.47 to 3.19 and from 1.29 to 4.43 mg/g in 24 and 96 h, respectively. Accumulation in adults was higher ranging from 2.30 to 4.19 and from 4.38 to 6.20 mg/g in 24 and 96 h, respectively. Phase contrast microscopy images revealed that Artemia were unable to excrete the particles. Thus, the TiO₂ aggregates filled inside the guts. No significant mortality or toxicity occurred within 24 h at any dose. Lipid peroxidation levels characterized with malondialdehyde concentrations were not statistically different from those of the controls (p?>?0.05). These results suggested that suspensions of the TiO₂ NPs were nontoxic to Artemia, most likely due to the formation of benign TiO₂ aggregates in water. In contrast, both mortality and lipid peroxidation increased in extended exposure to 96 h. Highest mortality occurred in 100 mg/L TiO₂ NP suspensions; 18 % for nauplii and 14 % for adults (LC₅₀?>?100 mg/L). These effects were attributed to the particle loading inside the guts leading to oxidative stress as a result of impaired food uptake for a long period of time.     

Carbonation and CO2 uptake of concrete

This study developed a reliable procedure to assess the carbon dioxide (CO₂) uptake of concrete by carbonation during the service life of a structure and by the recycling of concrete after demolition. To generalize the amount of absorbable CO₂ per unit volume of concrete, the molar concentration of carbonatable constituents in hardened cement paste was simplified as a function of the unit content of cement, and the degree of hydration of the cement paste was formulated as a function of the water-to-cement ratio. The contribution of the relative humidity, type of finishing material for the concrete surface, and the substitution level of supplementary cementitious materials to the CO₂ diffusion coefficient in concrete was reflected using various correction factors. The following parameters varying with the recycling scenario were also considered: the carbonatable surface area of concrete crusher-runs and underground phenomena of the decreased CO₂ diffusion coefficient and increased CO₂ concentration. Based on the developed procedure, a case study was conducted for an apartment building with a principal wall system and an office building with a Rahmen system, with the aim of examining the CO₂ uptake of each structural element under different exposure environments during the service life and recycling of the building. As input data necessary for the case study, data collected from actual surveys conducted in 2012 in South Korea were used, which included data on the surrounding environments, lifecycle inventory database, life expectancy of structures, and recycling activity scenario. Ultimately, the CO₂ uptake of concrete during a 100-year lifecycle (life expectancy of 40 years and recycling span of 60 years) was estimated to be 15.5%–17% of the CO₂ emissions from concrete production, which roughly corresponds to 18%–21% of the CO₂ emissions from the production of ordinary Portland cement.     

Toxicity assessment of textile effluents treated by advanced oxidative process (UV/TiO2 and UV/TiO2/H2O2) in the species Artemia salina L.

Textile industry wastes raise a great concern due to their strong coloration and toxicity. The objective of the present work was to characterize the degradation and mineralization of textile effluents by advanced oxidative processes using either TiO₂ or TiO₂/H₂O₂ and to monitor the toxicity of the products formed during 6-h irradiation in relation to that of the in natura effluent. The results demonstrated that the TiO₂/H₂O₂ association was more efficient in the mineralization of textile effluents than TiO₂, with high mineralized ion concentrations (NH ₄ ⁺ , NO ₃ ^? , and SO ₄ ^2? ) and significantly decreased organic matter ratios (represented by the chemical oxygen demand and total organic carbon). The toxicity of the degradation products after 4-h irradiation to Artemia salina L. was not significant (below 10 %). However, the TiO₂/H₂O₂ association produced more toxicity under irradiation than the TiO₂ system, which was attributed to the increased presence of oxidants in the first group. Comparatively, the photogenerated products of both TiO₂ and the TiO₂/H₂O₂ association were less toxic than the in natura effluent.     

Recycling of paint-contaminated grit

The impact on the environment of using paint-contaminated grit (PCG) as a partial or full replacement for sand in Portland cement mortar and asphalt concrete mixtures was investigated. The grit waste material originated from abrasive blasting of offshore steel structures. There is a major environmental concern regarding the safe disposal of the spent blasting abrasives that contain paint chips or paint particles and other debris removed from the surface of the steel structures. This work investigated the potential reuse of PCG in Portland cement concrete (PCC) and hot mix asphalt concrete. Several studies were conducted to establish the integrity of the materials containing the recycled grit. These included the chemical and physical characterization of natural sand and PCG, the assay of leaches associated with the grit material for hazardous metal contaminants, such as Cr, Cd and Pb, and the assessment of the mechanical properties of the PCG-substituted mortars by applying special tests (such as Marshall stability and determination of the flow properties) to the PCG-substituted asphalt concrete mixtures. The overall results demonstrated that the potential reuse of PCG in PCC and asphalt concrete mixtures would not pose any environmental threat and could produce several benefits, such as reduced disposal costs, protection of water sources from improper disposal practices and reduced costs in the production of natural aggregates and asphalt cement.     

Benchmarking environmental and economic impacts from the HSR networks considering life cycle perspectives

This paper unprecedentedly benchmarks the environmental and economic impacts of notable High-speed rail (HSR) networks. The goals are to (i) point out the environmental impacts from the HSR networks and (ii) evaluate the whole life cycle cost of HSR systems. The emphasis of this study is placed on five HSR networks from five countries to depict the effectiveness of sustainable transport policies in each particular country. Both life cycle assessment (LCA) and life cycle cost (LCC) models are adopted for a new critical framework capable of benchmarking the lifecycle sustainability of HSR networks. The new findings exhibit that CRC's system is the leader in energy-saving, who consumes only 67.55 GJ/km yearly, and emits lowest CO₂ at an amount of 77,532.32 tCO₂/km annually. These impressive results are stemmed from key enabling policies related to eco-friendly rolling stock design, sustainable construction, and green energy grids. With respect to the LCC analysis, the SCNF network takes advantage in the economy of scale and unleashes the lowest cost among other networks. It estimates that the SNCF network spends approximately 1,990,599.51 £/km annually at a % discount rate. The implications of these finding are discussed that the initial project has a high chance to be successful on economic than the late project due to an influence of the time value of money.     

Preferential sorption of some natural organic matter fractions to titanium dioxide nanoparticles: influence of pH and ionic strength

Natural organic matter (NOM) sorption to nanoparticles (NPs) can influence their transport and bioavailability in the aquatic environment. The sorption affinity of NOM to surfaces including NPs is size dependent, and depending on environmental conditions, NOM may enhance or mitigate NPs toxicity. The aim of this study was to investigate the preferential sorption of different-sized fractions of NOM to titanium dioxide (TiO₂) NPs. We specifically investigated the influence of pH, ionic strength, and NOM concentration on the extent of this preferential sorption using a constant sorbent concentration (400 mg/L TiO₂ NPs). Additionally, sorption of NOM to TiO₂ NPs at varying pH was investigated. The nonsorbed NOM was separated from the sorbed, by 50 nm polycarbonate membrane filters and ultracentrifugation. High-performance size exclusion chromatography (HPSEC) was used to determine the average molecular weights of NOM (MWw). Corroborative evidence of preferential sorption of different-sized molecular weight fractions of NOM was obtained from optical techniques such as absorbance and fluorescence spectrophotometry. The total organic carbon was measured by the Total Organic Carbon Analyzer—Shimadzu (TOC-VCPH). The results indicated that there is preferential sorption of larger sized fractions of NOM to TiO₂ NPs irrespective of NOM concentration. It was observed that the sorption of larger sized fractions of NOM was much enhanced at lower pH and at higher ionic strength. Both absorbance and fluorescence spectrophotometric techniques gave credible corroborative evidence on the extent of preferential sorption of lager sized fractions of NOM with respect to pH and ionic strength. The sorption results demonstrated higher sorption at lower pH than at higher pH. Overall, the results of this study suggest that the environmental conditions are key factors that can contribute to NOM’s fractional preferential sorption to NPs in the aquatic environment.     

A new method to assess the sustainability performance of events: Application to the 2014 World Orienteering Championship

Nowadays an increasing attention of public and private agencies to the sustainability performance of events is observed, since it is recognized as a key issue in the context of sustainable development. Assessing the sustainability performance of events involves environmental, social and economic aspects; their impacts are complex and a quantitative assessment is often difficult. This paper presents a new quali-quantitative method developed to measure the sustainability of events, taking into account all its potential impacts. The 2014 World Orienteering Championship, held in Italy, was selected to test the proposed evaluation methodology. The total carbon footprint of the event was 165.34 tCO₂eq and the avoided emissions were estimated as being 46 tCO₂eq. The adopted quali-quantitative method resulted to be efficient in assessing the sustainability impacts and can be applied for the evaluation of similar events.     

Can Chinese-style environmental collaboration improve the air quality? A quasi-natural experimental study across Chinese cities

Environmental management has evolved from a vertical command and control management model to a more collaborative one. A series of public administration studies take the field of environmental policy as an important background for understanding collaborative governance, yet the theoretical and empirical study of environmental collaborative governance is relatively under-developed. This article begins to fill the research lacuna through the investigation of air pollution collaborative governance practice in Jing-Jin-Ji and surrounding areas. Based on the panel data of 58 regional cities from January 2016 to March 2019, a difference in difference quasi-natural experiment design is employed to explore the effect of environmental collaboration under Chinese authoritarian regime. The analysis shows that environmental collaboration has a positive impact on air quality and exhibits different effects on primary and secondary pollutants. Specifically, it has a greater influence on the emission reduction of NO₂ compared to SO₂ and CO, the positive effects of environmental collaboration on PM_2.5 and PM₁₀ pollutants are significant, and there is no statistically positive impact on O₃ control. The time trend effect of environmental collaboration varies among pollutants, it presents positive effects on air quality improvement and secondary pollutant control (e.g., PM_2.5, PM₁₀) after the fourth month, the mitigation effect of environmental collaboration on primary pollutants represented by NO₂ is more significant and constant in the sixth month. However, the time trend effect of environmental collaboration has gradually weakened. This paper concludes with discussions on the direction and implications of improving the performance and sustainability of environmental collaboration in China.     

Global warming implications of facade parameters: A life cycle assessment of residential buildings in Bahrain

On a global scale, the Gulf Corporation Council Countries (GCCC), including Bahrain, are amongst the top countries in terms of carbon dioxide emissions per capita. Building authority in Bahrain has set a target of 40% reduction of electricity consumption and associated CO₂ emissions to be achieved by using facade parameters. This work evaluates how the life cycle CO₂ emissions of buildings are affected by facade parameters. The main focus is placed on direct and indirect CO₂ emissions from three contributors, namely, chemical reactions during production processes (Pco₂), embodied energy (Eco₂) and operational energy (OPco₂). By means of the life cycle assessment (LCA) methodology, it has been possible to show that the greatest environmental impact occurs during the operational phase (80–90%). However, embodied CO₂ emissions are an important factor that needs to be brought into the systems used for appraisal of projects, and hence into the design decisions made in developing projects. The assessment shows that masonry blocks are responsible for 70–90% of the total CO₂ emissions of facade construction, mainly due to their physical characteristics. The highest Pco₂ emissions factors are those of window elements, particularly aluminium frames. However, their contribution of CO₂ emissions depends largely on the number and size of windows. Each square metre of glazing is able to increase the total CO₂ emissions by almost 30% when compared with the same areas of opaque walls. The use of autoclaved aerated concrete (AAC) walls reduces the total life cycle CO₂ emissions by almost 5.2% when compared with ordinary walls, while the use of thermal insulation with concrete wall reduces CO₂ emissions by 1.2%. The outcome of this work offers to the building industry a reliable indicator of the environmental impact of residential facade parameters.     

The effect of various types of cement dust on sulphur dioxide oxidation in the air

The effect of various types of cement dust on the behaviour of sulphur dioxide in the air was investigated on model systems in different experimental conditions.Experiments were carried out with PC-15z-45s (Portland-blast furnace cement containing 15% blast furnace slag), PC-25p-35s (Portland-pozzolan cement containing 25% pozzolan) and EFD (electrofilter dust).EFD most effectively removed SO₂ from the air stream. The next efficacious was PC-15z-45s, whereas PC-25p-35s was the least efficient. The efficacy of cement dusts for SO₂ removal from the air stream depended on their chemical and granulometric composition and in particular on the size of specific surface.The rate of reaction was also influenced by experimental conditions—relative humidity, the length of contact, that is, the flow rate of gaseous mixture through the reactor, and the amount of cement dust.The experimental data show that in the contact between SO₂ and cement dust catalytic oxidation of SO₂ to sulphates takes place. Sulphates remain bound to the surface, from which they cannot be thermally desorbed, but can be released by extraction in the Soxhlet apparatus.     

Photocatalytic degradation of phenol

In this study photocatalytic degradation of phenol in thepresence of UV irradiated TiO₂ catalyst andH₂O₂was investigated. Effects of TiO₂ andH₂O₂concentrations and pH on photocatalytic degradation were examined. The rate constants for photocatalytic degradation wereevaluated as a function of TiO₂ and H₂O₂ concentrations and pH of the solution. It was found thatphotodegradation is an effective method for the removal of phenoland disappearance of phenol obeyed first order kinetics. The amount of CO₂h produced during photocatalytic degradation wascorresponding to the complete mineralization. Photodegradationcan be an alternative method for the treatment of phenol containing wastewaters.     

Photocatalytic degradation of NOx in a pilot street canyon configuration using TiO2-mortar panels

Titanium dioxide is the most important photocatalysts used for purifying applications. If a TiO₂- containing material is left outdoors as a form of flat panels, it is activated by sunlight to remove harmful NOx gases during the day. The photocatalytic efficiency of a TiO₂-treated mortar for removal of NOx was investigated in the frame of this work. For this purpose a fully equipped monitoring system was designed at a pilot site. This system allows the in situ evaluation of the de-polluting properties of a photocatalytic material by taking into account the climatologic phenomena in street canyons, accurate measurements of pollution level and full registration of meteorological data The pilot site involved three artificial canyon streets, a pollution source, continuous NOx measurements inside the canyons and the source as well as background and meteorological measurements. Significant differences on the NOx concentration level were observed between the TiO₂ treated and the reference canyon. NOx values in TiO₂ canyon were 36.7 to 82.0% lower than the ones observed in the reference one. Data arising from this study could be used to assess the impact of the photocatalytic material on the purification of the urban environment.     

Soil respiration,labile carbon pools,and enzyme activities as affected by tillage practices in a tropical rice–maize–cowpea cropping system

In order to identify the viable option of tillage practices in rice–maize–cowpea cropping system that could cut down soil carbon dioxide (CO₂) emission, sustain grain yield, and maintain better soil quality in tropical low land rice ecology soil respiration in terms of CO₂ emission, labile carbon (C) pools, water-stable aggregate C fractions, and enzymatic activities were investigated in a sandy clay loam soil. Soil respiration is the major pathway of gaseous C efflux from terrestrial systems and acts as an important index of ecosystem functioning. The CO₂–C emissions were quantified in between plants and rows throughout the year in rice–maize–cowpea cropping sequence both under conventional tillage (CT) and minimum tillage (MT) practices along with soil moisture and temperature. The CO₂–C emissions, as a whole, were 24 % higher in between plants than in rows, and were in the range of 23.4–78.1, 37.1–128.1, and 28.6–101.2 mg m^?2 h^?1 under CT and 10.7–60.3, 17.3–99.1, and 17.2–79.1 mg m^?2 h^?1 under MT in rice, maize, and cowpea, respectively. The CO₂–C emission was found highest under maize (44 %) followed by rice (33 %) and cowpea (23 %) irrespective of CT and MT practices. In CT system, the CO₂–C emission increased significantly by 37.1 % with respect to MT on cumulative annual basis including fallow. The CO₂–C emission per unit yield was at par in rice and cowpea signifying the beneficial effect of MT in maintaining soil quality and reduction of CO₂ emission. The microbial biomass C (MBC), readily mineralizable C (RMC), water-soluble C (WSC), and permanganate-oxidizable C (PMOC) were 19.4, 20.4, 39.5, and 15.1 % higher under MT than CT. The C contents in soil aggregate fraction were significantly higher in MT than CT. Soil enzymatic activities like, dehydrogenase, fluorescein diacetate, and β-glucosidase were significantly higher by 13.8, 15.4, and 27.4 % under MT compared to CT. The soil labile C pools, enzymatic activities, and heterotrophic microbial populations were in the order of maize?>?cowpea?>?rice, irrespective of the tillage treatments. Environmental sustainability point of view, minimum tillage practices in rice–maize–cowpea cropping system in tropical low land soil could be adopted to minimize CO₂–C emission, sustain yield, and maintain soil health.     

中国水泥行业2011—2022年二氧化碳和大气污染物排放分析

2011—2021年,熟料产量呈波动上升趋势。水泥行业整体生产运行水平不断提高,熟料单条生产线平均规模由43.8万t/条提升至115.3万t/条,熟料单位产品综合能耗下降14.4%,熟料单位产品CO₂排放强度下降6.3%,但CO₂排放总量增加了13.8%,与氮氧化物减排趋势形成较大反差,碳污治理水平差距明显。熟料生产中石灰石分解和煤炭燃烧过程的CO₂排放合计占比为92.9%~93.8%,是CO₂排放的主要来源。由于熟料系数偏高、非碳酸盐原料替代不足、综合能耗仍然较高等原因,安徽等7个熟料产量大的省份的CO₂排放强度高于全国。建议实行碳酸盐熟料产量总量控制,逐步降低熟料应用比例,加快建材市场熟料产品和非碳酸盐原料替代,降低高标号水泥使用比例。应大力推广水泥行业节能降耗增效技术,加快熟料落后产能淘汰。对熟料产量大、碳排放强度高的地区,应结合当地碳排放特点,实行差别化降碳策略。各大气污染防治重点区域应因地施策推进水泥行业减污降碳工作。     

Assessing the impact of FDI on PM2.5 concentrations: A nonlinear panel data analysis for emerging economies

While emerging markets have obtained powerful growth for foreign direct investment (FDI) inflows, they are facing severe smog pollution, and this contradiction has become increasingly prominent since the financial crisis. Assessing the influence of FDI on pollutant emissions is of great significance for determining how to attract FDI to promote environmental sustainability. The present study simultaneously investigates the direct and indirect effects of FDI on PM_2.5 contamination for emerging countries spanning the period 2010–2016. Due to the features of the nonlinear analysis, a generalized panel smooth transition regression (GPSTR) model was introduced, and cross-sectional dependence, heterogeneity, nonlinear unit root, nonlinear cointegration tests and non-parametric kernel density estimation were applied to achieve this goal. The results reveal that FDI directly contributes to decreasing PM_2.5, but indirectly has on increasing PM_2.5 emissions. The total effect of FDI on PM_2.5 concentrations is proven to be negative, which confirms the pollution halo hypothesis. Moreover, the connection between FDI inflows and PM_2.5 emissions displays a threshold and dynamic characteristic and is “S-shaped”. At lower levels of FDI, the inflows of FDI exert a positive effect on reducing PM_2.5 concentrations, whereas when FDI exceeds the threshold of 23.2981, such influence is gradually weakened with an increase in its own accumulation. The study provides new assessments on FDI's contribution to pollutant emissions and evidence for environmental sustainability in the post-financial crisis era.     

Assessment of environmental impact on air quality by cement industry and mitigating measures: a case study

In this study, environmental impact on air quality was evaluated for a typical Cement Industry in Nigeria. The air pollutants in the atmosphere around the cement plant and neighbouring settlements were determined using appropriate sampling techniques. Atmospheric dust and CO₂ were prevalent pollutants during the sampling period; their concentrations were recorded to be in the range of 249–3,745 mg/m³ and 2,440–2,600 mg/m³, respectively. Besides atmospheric dust and CO₂, the air pollutants such as NO _x , SO _x and CO were in trace concentrations, below the safe limits approved by FEPA that are 0.0062–0.093 mg/m³ NO _x , 0.026 mg/m³ SO _x and 114.3 mg/m³ CO, respectively. Some cost-effective mitigating measures were recommended that include the utilisation of readily available and low-cost pozzolans material to produce blended cement, not only could energy efficiency be improved, but carbon dioxide emission could also be minimised during clinker production; and the installation of an advance high-pressure grinding rolls (clinker–roller-press process) to maximise energy efficiency to above what is obtainable from the traditional ball mills and to minimise CO₂ emission from the power plant.     

杭州市大气PM2.5和PM10污染特征及来源解析

2006年在杭州市两个环境受体点位采集不同季节大气中PM_2.5和PM₁₀样品,同时采集了多种颗粒物源类样品,分析了其质量浓度和多种化学成分,包括21种无机元素、5种无机水溶性离子以及有机碳和元素碳等,并据此构建了杭州市PM_2.5和PM₁₀的源与受体化学成分谱;用化学质量平衡(CMB)受体模型解析其来源。结果表明,杭州市PM_2.5和PM₁₀污染较严重,其年均浓度分别为77.5μg/m³和111.0μg/m³;各主要源类对PM_2.5的贡献率依次为机动车尾气尘21.6%、硫酸盐18.8%、煤烟尘16.7%、燃油尘10.2%、硝酸盐9.9%、土壤尘8.2%、建筑水泥尘4.0%、海盐粒子1.5%。各主要源类对PM₁₀贡献率依次为土壤尘17.0%、机动车尾气尘16.9%、硫酸盐14.3%、煤烟尘13.9%、硝酸盐粒8.2%、建筑水泥尘8.0%、燃油尘5.5%、海盐粒子3.4%、冶金尘3.2%。     

Methane oxidation and abundance of methane oxidizers in tropical agricultural soil (vertisol) in response to CuO and ZnO nanoparticles contamination

There is worldwide concern over the increase use of nanoparticles (NPs) and their ecotoxicological effect. It is not known if the annual production of tons of industrial nanoparticles (NPs) has the potential to impact terrestrial microbial communities, which are so necessary for ecosystem functioning. Here, we have examined the consequences of adding the NPs particularly the metal oxide (CuO, ZnO) on CH₄ oxidation activity in vertisol and the abundance of heterotrophs, methane oxidizers, and ammonium oxidizers. Soil samples collected from the agricultural field located at Madhya Pradesh, India, were incubated with either CuO and ZnO NPs or ionic heavy metals (CuCl₂, ZnCl₂) separately at 0, 10, and 20 μg g^?1 soil. CH₄ oxidation activity in the soil samples was estimated at 60 and 100 % moisture holding capacity (MHC) in order to link soil moisture regime with impact of NPs. NPs amended to soil were highly toxic for the microbial-mediated CH₄ oxidation, compared with the ionic form. The trend of inhibition was Zn 20?>?Zn 10?>?Cu 20?>?Cu 10. NPs delayed the lag phase of CH₄ oxidation to a maximum of 4-fold and also decreased the apparent rate constant k up to 50 % over control. ANOVA and Pearson correlation analysis (α?=?0.01) revealed significant impact of NPs on the CH₄ oxidation activity and microbial abundance (p?<?0.0001, and high F statistics). Principal component analysis (PCA) revealed that PC1 (metal concentration) rendered 76.06 % of the total variance, while 18.17 % of variance accounted by second component (MHC). Biplot indicated negative impact of NPs on CH₄ oxidation and microbial abundance. Our result also confirmed that higher soil moisture regime alleviates toxicity of NPs and opens new avenues of research to manage ecotoxicity and environmental hazard of NPs.     

Assessing the urban carbon footprint: An overview

All cities present environmental sustainability issues, above all regarding greenhouse gas (GHG) emissions, and specifically carbon dioxide (CO₂), that directly affect climate change. Consequently, it is very important to quantify and report their Carbon Footprint (CF) for implementing national and international policies/strategies aimed at mitigating and adapting these concerns. The Urban Carbon Footprint (UCF), indeed, has been recognized as the more valuable choice to inform, specifically, decision makers about city environmental sustainability. Several accounting systems and inventory methods have been taken into account to perform UCF, highlighting the complexity of the topic and generating very often confusion among users.In this context, the authors aim to summarize what has been done and what is going on with UCFs, trying to classify them according to some principal dimensions. Thus, they divide UFCs in two main categories namely: “spatial” or “direct”, with a limited amount of data requested, and “economic” or “life cycle based”, more or less data inclusive according to the accounting systems considered. Furthermore, they observe that there is not a “global agreed-upon protocol” yet, neither is there a specific model shared among researchers, even if some steps have been made towards this direction (Relative Carbon Footprint - RCF, Publicly Available Specification – PAS 2070 and Global Protocol for Community scale - GPC). Consequently, it is necessary to complete and standardize, in the short term, the accounting and reporting frameworks, in order to compare different UCFs for adopting shared climate strategies and actions at global level.     

Almond shell activated carbon: adsorbent and catalytic support in the phenol degradation

In this work, two technologies are studied for the removal of phenol from aqueous solution: dynamic adsorption onto activated carbon and photocatalysis. Almond shell activated carbon (ASAC) was used as adsorbent and catalytic support in the phenol degradation process. The prepared catalyst by deposition of anatase TiO₂ on the surface of activated carbon was characterized by scanning electron microscopy, sorption of nitrogen, X-ray diffraction, Fourier transform infrared (FT-IR) spectroscopy, and pH_ZPC point of zero charge. In the continuous adsorption experiments, the effects of flow rate, bed height, and solution temperature on the breakthrough curves have been studied. The breakthrough curves were favorably described by the Yoon–Nelson model. The photocatalytic degradation of phenol has been investigated at room temperature using TiO₂-coated activated carbon as photocatalyst (TiO₂/ASAC). The degradation reaction was optimized with respect to the phenol concentration and catalyst amount. The kinetics of disappearance of the organic pollutant followed an apparent first-order rate. The findings demonstrated the applicability of ASAC for the adsorptive and catalytic treatment of phenol.