Measurement of the leaching behaviour of granular solid wastes

Leaching of granular solids can be described in terms of specific mass transfer functions of a simple mathematical form.

The parameters can be determined by column leaching experiments under well known flow conditions.

Initially available concentrations are obtained from batch experiments at high dilution. Total concentrations in the solids are determined independently to calculate the available fractions.

The determination of the flow pattern is done by radiotracer measurements. Leachates are analyzed by various analytical methods including AAS and INAA. Total concentrations in the solids are determined by INAA preferably.     

Analytical studies on the pollution of argeş river

Using two analytical techniques (ICP‐AES and ASV) the heavy metal pollution of Arge? River was studied. These techniques are characterized by similar analytical performances.

The samples were collected from 13 sites starting from Capra Lake (altitude 2241 m) and finishing at Oltenita city (altitude 10 m).

Arge? River is the fifth longest river in Romania after Siret, Mure?, Olt and Some?, its length is 340 km and the river flows through four cities, Curtea de Arge?, Pite?ti, Gae?ti and Oltenita.

The results of the determinations of Cu, Cd, Zn and Pb, indicate that the Arge? River shows relatively low pollution.     

Ecotoxicity in Aliivibrio fischeri of Ibuprofen,Omeprazole and their Mixtures

The acute ecotoxic effects of ibuprofen and omeprazole and their mixture have been measured using Aliivibrio fischeri as a biomodel. The toxic effects were also tested after 5 days, and an effect-driven approach was used to analyse the results. The toxic effects of the mixtures were compared with the predictions obtained using concentration addition and independent action mathematical methods.

According to the Passino and Smith classification, the results indicate that ibuprofen can be considered slightly toxic (10<EC₅₀ <100?mg?L^-1), while omeprazole can be denoted as moderately toxic (1<EC₅₀ <10?mg?L^-1) to Aliivibrio fischeri. An overestimation of the actual ecotoxic effect of the mixture was found when the concentration addition and independent action methods were applied. Finally, the effect-driven approach indicated that the transformation products of the studied drugs should be prioritized for risk assessment purposes.     

Algae and bacteria consortia for wastewater decontamination and transformation into biodiesel,bioethanol, biohydrogen,biofertilizers and animal feed: a review

Traditional wastewater treatment has been aimed solely at sanitation by removing contaminants, yet actual issues of climate change and depletion of natural resources are calling for methods that both remove contaminants and convert waste into chemicals and fuels. In particular, biological treatments with synergic coupling of microalgae and bacteria appear promising to remove organic, inorganic, and pathogen contaminants and to generate biofuels. Here, we review the use of algae and bacteria in the treatment and valorization of wastewater with focus on cell-to-cell adhesion, wastewater properties, and techniques for algae harvesting and production of biodiesel, bioethanol, biohydrogen, exopolysaccarides, biofertilizers, and animal feeds.

     

Recycling municipal,agricultural and industrial waste into energy,fertilizers, food and construction materials,and economic feasibility: a review

The global amount of solid waste has dramatically increased as a result of rapid population growth, accelerated urbanization, agricultural demand, and industrial development. The world's population is expected to reach 8.5 billion by 2030, while solid waste production will reach 2.59 billion tons. This will deteriorate the already strained environment and climate situation. Consequently, there is an urgent need for methods to recycle solid waste. Here, we review recent technologies to treat solid waste, and we assess the economic feasibility of transforming waste into energy. We focus on municipal, agricultural, and industrial waste. We found that methane captured from landfilled-municipal solid waste in Delhi could supply 8–18 million houses with electricity and generate 7140 gigawatt-hour, with a prospected potential of 31,346 and 77,748 gigawatt-hour by 2030 and 2060, respectively. Valorization of agricultural solid waste and food waste by anaerobic digestion systems could replace 61.46% of natural gas and 38.54% of coal use in the United Kingdom, and could reduce land use of 1.8 million hectares if provided as animal feeds. We also estimated a levelized cost of landfill solid and anaerobic digestion waste-to-energy technologies of $0.04/kilowatt-hour and $0.07/kilowatt-hour, with a payback time of 0.73–1.86 years and 1.17–2.37 years, respectively. Nonetheless, current landfill waste treatment methods are still inefficient, in particular for treating food waste containing over 60% water.

     

HPLC-MS/MS in der Rückstandsanalytik von Pflanzenschutzmitteln

Goal and Scope

Increasing demands from the regulatory authorities of plant protection products for residue analytical methods on the one hand and the need for cost reduction by shorter development times on the other hand have led to a significant displacement of conventional methods (e.g. HPLC-UV or GC-MS) by HPLC-MS/MS with atmospheric pressure ionization (API) in residue analysis since the mid of the 1990s. This development started in the pharmaceutical industries where HPLC-MS/MS had already been used for the quantitation of drugs and their metabolites in plasma since the late 1980s.

Methods

The reason for the high acceptability of HPLC-MS/MS with electrospray ionisation (ESI) or chemical ionization at atmosheric pressure (APCI) compared with alternative methods are shown with respect to analytical quality parameters, compliance with international registration guidelines and economic reasons.

Results and Conclusion

HPLC-MS/MS is being applied for solving ca. 75% of all analytical problems occuring in modern residue analytical laboratories. This technique offers convincing advantages for the determination of plant protection products and their metabolites in various matrices. These are a reduced number of or no clean-up steps after extraction of the samples, high throughput besides high ruggedness, low limits of detection and a large linear measuring range. In addition, several analytes of various chemical classes can be determined within one chromatographic run. Due to the high selectivity there is only little need for additional confirmatory methods. For enforcement purposes HPLC-MS/MS is accepted by the European authorities since 2002. However, due to high costs for instrumentation and specially skilled personnel only few enforcement laboratories have invested into this technology, so far.

Recommendation and Perspective

The importance of HPLC-MS/MS in residue analysis will further increase, as new ionization techniques will enable the analysis of more analytes and as the investment costs will decrease in the future. However, proven conventional methods will still survive in some cases. New concepts, such as parallel HPLC-MS/MS or on-line purification of extracts by column switching which are already widely used in the pharmaceutical industry could help to further increase the throughput. However, for a sound evaluation with respect to their applicability in residue analysis there is so far too little experience.     

Biofuel production,hydrogen production and water remediation by photocatalysis,biocatalysis and electrocatalysis

The energy crisis and environmental pollution have recently fostered research on efficient methods such as environmental catalysis to produce biofuel and to clean water. Environmental catalysis refers to green catalysts used to breakdown pollutants or produce chemicals without generating undesirable by-products. For example, catalysts derived from waste or inexpensive materials are promising for the circular economy. Here we review environmental photocatalysis, biocatalysis, and electrocatalysis, with focus on catalyst synthesis, structure, and applications. Common catalysts include biomass-derived materials, metal–organic frameworks, non-noble metals nanoparticles, nanocomposites and enzymes. Structure characterization is done by Brunauer–Emmett–Teller isotherm, thermogravimetry, X-ray diffraction and photoelectron spectroscopy. We found that water pollutants can be degraded with an efficiency ranging from 71.7 to 100%, notably by heterogeneous Fenton catalysis. Photocatalysis produced dihydrogen (H₂) with generation rate higher than 100 μmol h⁻¹. Dihydrogen yields ranged from 27 to 88% by methane cracking. Biodiesel production reached 48.6 to 99%.

     

Optimizing biomass pathways to bioenergy and biochar application in electricity generation,biodiesel production,and biohydrogen production

The current energy crisis, depletion of fossil fuels, and global climate change have made it imperative to find alternative sources of energy that are both economically sustainable and environmentally friendly. Here we review various pathways for converting biomass into bioenergy and biochar and their applications in producing electricity, biodiesel, and biohydrogen. Biomass can be converted into biofuels using different methods, including biochemical and thermochemical conversion methods. Determining which approach is best relies on the type of biomass involved, the desired final product, and whether or not it is economically sustainable. Biochemical conversion methods are currently the most widely used for producing biofuels from biomass, accounting for approximately 80% of all biofuels produced worldwide. Ethanol and biodiesel are the most prevalent biofuels produced via biochemical conversion processes. Thermochemical conversion is less used than biochemical conversion, accounting for approximately 20% of biofuels produced worldwide. Bio-oil and syngas, commonly manufactured from wood chips, agricultural waste, and municipal solid waste, are the major biofuels produced by thermochemical conversion. Biofuels produced from biomass have the potential to displace up to 27% of the world's transportation fuel by 2050, which could result in a reduction in greenhouse gas emissions by up to 3.7 billion metric tons per year. Biochar from biomass can yield high biodiesel, ranging from 32.8% to 97.75%, and can also serve as an anode, cathode, and catalyst in microbial fuel cells with a maximum power density of 4346 mW/m². Biochar also plays a role in catalytic methane decomposition and dry methane reforming, with hydrogen conversion rates ranging from 13.4% to 95.7%. Biochar can also increase hydrogen yield by up to 220.3%.

     

Analytical expression for predicting the reduced settling velocity of small particles in turbulence

The influence of turbulence on the settling velocity of small particles remains an inconclusive research subject. Both enhanced and retarded particle settling compared to quiescent settling have been reported in previous literature, and several theories have been proposed. Among the mechanisms that account for reduced settling velocities in turbulence, the loitering effect is an important one that generally exists in various conditions. This study focuses on an analytical prediction of reduced particle settling velocities due to the loitering effect. By considering the velocity autocorrelation function as a step function analogous to the free path theory, and using a modified integral time scale to capture the essence of the loitering effect, an analytical expression is derived for predicting the reduction in particle settling velocities in turbulent flows. Calculation results of the expression are then examined by comparing with the results of a random walk model, direct numerical simulations that conditionally captured the reduction of particle settling velocities due to the loitering effect, and several representative experiments. Major possible influencing factors on the prediction of the analytical expression and applicable conditions of the expression are then further discussed. The proposed analytical expression is shown to be suitable for predicting the reduced settling velocities of small particles with relatively weak inertia in turbulent flows and could provide a reasonable explanation for reported cases in which small to moderate reductions in particle settling velocities were observed.

     

Persistence of gemfibrozil, naproxen and mefenamic acid in natural waters

The occurrence of pharmaceuticals in natural waters is a potential threat to human nutrition and ecosystem quality. The persistence of the acidic pharmaceuticals gemfibrozil, naproxen and mefenamic acid was studied in surface waters of Maracaibo Lake and Tule reservoir (Venezuela) under laboratory conditions. A quick and easy analytical method was developed for the determination of the acidic drugs at microgram per liter levels using aqueous derivatization, liquid–liquid extraction and gas chromatography–mass spectrometry. Pharmaceuticals degradation followed a pseudo first-order kinetic and their half-lives were calculated for every experimental condition. Under sunlight, naproxen and mefenamic acid were degraded at moderate rates with half-lives from 9.6 ± 0.5 to 27.0 ± 6.6 days, while gemfibrozil had a higher persistence (t _1/2 = 119.5 ± 15.6 − 288.8 ± 61.3 days).     

Extraction,chemical compositions,and cytotoxic activities of essential oils of Thevetia peruviana

Abstract

In this study, The essential oil of flowers, fruits, and leaves of Thevetia peruviana, which were collected in Vietnam, were being reported for the first time. The essential oil of flowers was extracted by different methods: n-hexane extraction, distillation water, and supercritical CO₂ extraction. The compositions of essential oil of different parts of Thevetia peruviana were analyzed by GC-FID and GC/MS systems. Major chemical compositions of essential oil were identified as monoterpenes, sesquiterpenes, terpenoids, and sterol. The activities of total essential oil extracts of the Thevetia peruviana exhibit inhibitory activities against five cancer cell lines.     

Possibilities and limitations of ecotoxicological testing of chemicals

This study concerns the polycyclic aromatic hydrocarbons (PAH's) emission from gasoline and diesel automobile engines.

The sampling procedure, the extraction and the analytical method are presented. Using the gas chromatography‐mass spectrometry technique it is possible to detect and quantify easily about 15 PAH's. Data obtained on exhaust particles collected from gasoline and diesel automobile engines are presented and discussed.     

Removal,adsorption and desorption of pentachlorophenol (PCP) by filamentous fungi: Rhizopusarrhizus and Cunninghamella elegans in batch system

PCP was, and in some countries still is, one of the most frequently used fungicides and pesticides, specially in wood preservation. The extensive use is correlated with contamination of water and soil and it is detected in several compartments of the food chain.

Some Micromycetes are able to adsorb and degrade PCP, with two mechanisms involved: biosorption (including both adsorption and absorption) and biodegradation.

Our work is focused on the biosorption alone and biodegradation‐biosorption of PCP by respectively denatured and living R.arrhizus and C.elegans fungi.

Living fungi are cultivated in batch system and denaturation is obtained by drying (70°C) and grinding the fungi to a calibrated powder (200–400 μm). Kinetic studies are performed with 10 mg/1 PCP initial concentration. Adsorption capacity is measured at equilibrium concentration as high as about 400 mg/1 PCP.

The results show that: PCP adsorption, for the two fungi, follows a two steps process. R. arrhizus dead and living biomasses are able to bind respectively, 75 and 55% of a 10 mg/1 PCP initial concentration in 1 hour contact time and then 75 and 100% in 96 hours. For C.elegans, 70 and 28% in 1 hour and in 96 hours 70 and 90%, respectively.

The PCP binding by living fungi is higher than non living ones, but with a slower rate.

The maximum PCP adsorption capacity is about 24 mg/g of R.arrhizus dried biomasses and 16 mg/g for C.elegans ones, in 48 hours contact time. Isotherm curves follow the Langmuir model.

Desorption studies with methanol (to reuse biomasses) shows that it is a rapid phenomenon (about 100% in 24 hours for the two fungi).

An industrial and economical process to depollute contaminated water by PCP is possible by using cheap fungal by‐products from fermentation industries.     

Microplastic sources,formation, toxicity and remediation: a review

Microplastic pollution is becoming a major issue for human health due to the recent discovery of microplastics in most ecosystems. Here, we review the sources, formation, occurrence, toxicity and remediation methods of microplastics. We distinguish ocean-based and land-based sources of microplastics. Microplastics have been found in biological samples such as faeces, sputum, saliva, blood and placenta. Cancer, intestinal, pulmonary, cardiovascular, infectious and inflammatory diseases are induced or mediated by microplastics. Microplastic exposure during pregnancy and maternal period is also discussed. Remediation methods include coagulation, membrane bioreactors, sand filtration, adsorption, photocatalytic degradation, electrocoagulation and magnetic separation. Control strategies comprise reducing plastic usage, behavioural change, and using biodegradable plastics. Global plastic production has risen dramatically over the past 70 years to reach 359 million tonnes. China is the world's top producer, contributing 17.5% to global production, while Turkey generates the most plastic waste in the Mediterranean region, at 144 tonnes per day. Microplastics comprise 75% of marine waste, with land-based sources responsible for 80–90% of pollution, while ocean-based sources account for only 10–20%. Microplastics induce toxic effects on humans and animals, such as cytotoxicity, immune response, oxidative stress, barrier attributes, and genotoxicity, even at minimal dosages of 10 μg/mL. Ingestion of microplastics by marine animals results in alterations in gastrointestinal tract physiology, immune system depression, oxidative stress, cytotoxicity, differential gene expression, and growth inhibition. Furthermore, bioaccumulation of microplastics in the tissues of aquatic organisms can have adverse effects on the aquatic ecosystem, with potential transmission of microplastics to humans and birds. Changing individual behaviours and governmental actions, such as implementing bans, taxes, or pricing on plastic carrier bags, has significantly reduced plastic consumption to 8–85% in various countries worldwide. The microplastic minimisation approach follows an upside-down pyramid, starting with prevention, followed by reducing, reusing, recycling, recovering, and ending with disposal as the least preferable option.

     

Removal and recovery of vanadium from waste by chemical precipitation,adsorption, solvent extraction,remediation, photo-catalyst reduction and membrane filtration. A review

At low concentrations, vanadium is essential for cell growth, yet vanadium is harmful to human beings, animals and plants at high concentrations. Therefore, vanadium should be removed from wastewater and solid waste to avoid pollution and to recycle vanadium in the context of the circular economy. Here we review aqueous vanadium species and techniques to remove vanadium such as adsorption, remediation, chemical precipitation, solvent extraction, photo-catalyst reduction and membrane filtration.

     

Professor Casu’s contribution to cyclodextrins,the remarkable cage-shaped molecules: a review

Cyclodextrins are cage-shaped molecules having the remarkable ability to trap smaller compounds, and have thus led to applications in many disciplines such as medicine to increase the bioavailability of hydrophobic drugs. This historical review summarizes the outstanding contribution of the late Professor Benito Casu to cyclodextrin research and, more generally, to the chemistry and biochemistry of linear and cyclic oligosaccharides, polysaccharides, glycosaminoglycans, and heparin. Professor Casu was the first to elucidate the structure and conformations of cyclodextrins by infrared spectroscopy and proton nuclear magnetic resonance (NMR). In particular, he showed that trapped compounds induced a shift of H peaks in NMR due to the shielding effect of cyclodextrins. He also demonstrated that the d-glucopyranose cyclodextrin units are in the C-1 chair conformation by analyzing α-cyclodextrin by NMR in dimethylsulfoxide-d₆.

     

Materials,fuels, upgrading,economy, and life cycle assessment of the pyrolysis of algal and lignocellulosic biomass: a review

Climate change issues are calling for advanced methods to produce materials and fuels in a carbon–neutral and circular way. For instance, biomass pyrolysis has been intensely investigated during the last years. Here we review the pyrolysis of algal and lignocellulosic biomass with focus on pyrolysis products and mechanisms, oil upgrading, combining pyrolysis and anaerobic digestion, economy, and life cycle assessment. Products include oil, gas, and biochar. Upgrading techniques comprise hot vapor filtration, solvent addition, emulsification, esterification and transesterification, hydrotreatment, steam reforming, and the use of supercritical fluids. We examined the economic viability in terms of profitability, internal rate of return, return on investment, carbon removal service, product pricing, and net present value. We also reviewed 20 recent studies of life cycle assessment. We found that the pyrolysis method highly influenced product yield, ranging from 9.07 to 40.59% for oil, from 10.1 to 41.25% for biochar, and from 11.93 to 28.16% for syngas. Feedstock type, pyrolytic temperature, heating rate, and reaction retention time were the main factors controlling the distribution of pyrolysis products. Pyrolysis mechanisms include bond breaking, cracking, polymerization and re-polymerization, and fragmentation. Biochar from residual forestry could sequester 2.74 tons of carbon dioxide equivalent per ton biochar when applied to the soil and has thus the potential to remove 0.2–2.75 gigatons of atmospheric carbon dioxide annually. The generation of biochar and bio-oil from the pyrolysis process is estimated to be economically feasible.

     

Impacts of land use and land cover change on the interactions among multiple soil-dependent ecosystem services (case study: Jiroft plain,Iran)

The spatial and temporal distribution pattern is an outstanding feature of the relationship among ecosystem services (ESs) that explains links between human activities and disturbed chemical composition of ecosystems. This study investigated the spatiotemporal variation of land use/cover changes (LUCC) and quantifies the change in four essential ecosystem services with an emphasis on soil (nutrient delivery ratio, carbon storage, crop production, and water yield) and their relationships in the Jiroft plain, Iran, during 1996–2016 through analytical tools including Land Change Modeler, and the Integrated Valuation of Ecosystem Services and Tradeoff. During the 20-year concentrate period, there was a considerable overall gain in cropland (5396 km²) and urban (1787 km²), loss of unused land (5692 km²), water (2088 km²), and forest (1083 km²). As a result of LUCC, while crop production and nutrient delivery ratio showed a rising trend, overall carbon storage and water yield decreased. The spatiotemporal trade-off between carbon storage and crop production, the temporal trade-off between crop production and water yield, and synergy between water yield and crop production were widespread in Jiroft plain. These results showed that the interaction among ESs mutates over time and can be changed under planning and policies. This study will enrich the research of the geographical distribution of ESs interaction in dryland ecosystems to provide practical ecosystem management under local conditions.

     

Mercury pollution in the Sonbhadra district of Uttar Pradesh,India, and its health impacts

The Sonbhadra district in the Singrauli area of Uttar Pradesh, India, has many coal mines and thermal power plants and is a critically polluted area. Many residents of this area reported adverse health conditions which may be linked to metal pollution, especially of mercury investigated here.

In May 2012, samples of water (23), soil (7), blood, hair, and nails from persons showing adverse health conditions selected at random were collected and analyzed for total mercury by atomic absorption spectrometry.

Twenty percent drinking water samples contained mercury from 3 to 26 μg L^?1 (3–26 times the permissible limit). Soil samples had 0.5–10.1 mg kg^?1 Hg.

The average concentrations of mercury in human blood, hair, and nails were found to be 34 μg L^?1, 7.4 mg kg^?1, and 0.8 mg kg^?1, respectively. Mercury concentrations in the blood of these persons were 45 and 28 μg L^?1 on average in the case of men and women. This is much higher than the safe level of 5.8 μg L^?1 set by the United States Environmental Protection Agency (USEPA).

It was concluded that all residents of Sonbhadra sampled could be suffering from mercury toxicity as the area is polluted by Hg released from the coal-fired thermal power plants.     

Sulfonated graphene nanomaterials for membrane antifouling,pollutant removal,and production of chemicals from biomass: a review

Water pollution and the unsustainable use of fossil fuel derivatives require advanced catalytic methods to clean waters and to produce fine chemicals from modern biomass. Classical homogeneous catalysts such as sulfuric, phosphoric, and hydrochloric acid are highly corrosive and non-recyclable, whereas heterogeneous catalysts appear promising for lignocellulosic waste depolymerization, pollutant degradation, and membrane antifouling. Here, we review the use of sulfonated graphene and sulfonated graphene oxide nanomaterials for improving membranes, pollutant adsorption and degradation, depolymerization of lignocellulosic waste, liquefaction of biomass, and production of fine chemicals. We also discuss the economy of oil production from biomass. Sulfonated graphene and sulfonated graphene oxide display an unusual large theoretical specific surface area of 2630 m²/g, allowing the reactants to easily enter the internal surface of graphene nanosheets and to reach active acid sites. Sulfonated graphene oxide is hydrophobic and has hydrophilic groups, such as hydroxyl, carboxyl, and epoxy, thus creating cavities on the graphene nanosheet’s surface. The adsorption capacity approached 2.3–2.4 mmol per gram for naphthalene and 1-naphthol. Concerning membranes, we observe an improvement of hydrophilicity, salt rejection, water flux, antifouling properties, and pollutant removal. The nanomaterials can be reused several times without losing catalytic activity due to the high stability originating from the stable carbon–sulfur bond between graphene and the sulfonic group.