Assessment of Heavy Metal and PAH Contamination of Urban Streambed Sediments on Macroinvertebrates

The results from measuring PAH and metal contamination together with macroinvertebrate communities at 62 headwater stream sites gives a significant insight into the range and scale of contamination. Monitoring streambed sediments at 62 sites from rural to inner city and in industrial locations presented a unique opportunity to distinguish the conditions that enhance pollution runoff at sites that are less obviously `at risk' and to compare these results with sites of expected high contamination, for example in industrial areas and at motorway junctions. We used pCCA (partial Canonical Correspondence Analysis) to tease out the relationships between individual macroinvertebrate families and specific metal and PAH contaminants, and showed that it is not always the metals and PAHs with the greatest total concentrations that are doing the damage to the ecology. Ni and Zn are the critical metals, while benzo(b)fluoranthene, anthracene and fluoranthene are the most contaminating PAHs. The results identify previously unrecognized `high risk' pollution sources, lay byes used for commercial parking, on-street residential parking areas, and the junctions at the bottom of hills with traffic lights, where surface runoff feeds rapidly to the streams. While this study looks at sites across Yorkshire, UK, it clearly has a broader significance for understanding contamination risks from diffuse runoff as a prerequisite for effective sustainable urban drainage system (SUDS) agendas and the protection of urban stream ecology.     

Toxicity and source assignment of polycyclic aromatic hydrocarbons in road dust from urban residential and industrial areas in a typical industrial city in Korea

This study analyzed the toxicity and sources of polycyclic aromatic hydrocarbons (PAHs) in road dust from six representative areas (three urban residential areas and three industrial areas) from a typical industrial city in Korea. The concentrations and the toxicity equivalent concentrations (TEQs) in road dust varied by area, depending on the type of traffic and industrial activities and the PAHs identified. High correlations between the total concentration and the TEQ of PAHs in road dust were found in road dust from both the urban and industrial areas. To identify the sources of PAHs, this study utilized a factor loading method in a principal component analysis, the ratio of PAHs from combustion sources to total PAHs (ΣCOMB to ΣPAH), and bivariate plots of phenanthrene/anthracene (PA/Ant) versus fluoranthene/pyrene (FL/Pyr), and ΣCOMB/ΣPAH versus FL/Pyr in road dust. The identified origin of the PAHs was fuel combustion, including gasoline, diesel, oil, and coal, used in urban and industrial areas.     

Sources of heavy metal contamination in Swedish wood waste used for combustion

In this paper, wood waste (RWW) recovered for heat production in Sweden was studied. Previous research has concluded that RWW contains elevated amounts of heavy metals, causing environmental problems during waste management. This study extends previous work on RWW by analysing which pollution sources cause this contamination. Using existing data on the metal contents in various materials, and the amounts of these materials in RWW, the share of the elevated amounts of metals in RWW that these materials explain was quantified. Six different materials occurring in RWW were studied and the results show that they explain from 70% to 100% of the amounts of arsenic, chromium, lead, copper and zinc in RWW. The most important materials contributing to contamination of RWW are surface-treated wood, industrial preservative-treated wood, plastic and galvanised fastening systems. These findings enable the development and evaluation of strategies aiming to decrease pollution and resource loss from handling RWW. It is argued that source separation and measures taken further downstream from the generation site, such as treatment, need to be combined to substantially decrease the amount of heavy metals in RWW.     

Evolution of heavy metals in municipal solid waste during bio-drying and implications of their subsequent transfer during combustion

Bio-drying has been applied to improve the heating value of municipal solid waste (MSW) prior to combustion. In the present study, evolution of heavy metals in MSW during bio-drying and subsequent combustion was studied using one aerobic and two combined hydrolytic-aerobic scenarios. Heavy metals were concentrated during bio-drying and transformed between different metal fractions, namely the exchangeable, carbonate-bound, iron- and manganese-oxides-bound, organic-matter-bound and residual fractions. The amounts of heavy metals per kg of bio-dried MSW transferred into combustion flue gas increased with bio-drying time, primarily due to metals enrichment from organics degradation. Because of their volatility, the partitioning ratios of As and Hg in flue gas remained stable so that bio-drying and heavy metal speciation had little effect on their transfer and partitioning during combustion. In contrast, the partitioning ratios of Pb, Zn and Cu tended to increase after bio-drying, which likely enhanced their release potential during combustion.     

Estimating PAH sources in harbor sediments using diagnostic ratios

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous in the global environment and are subsequently transported into aquatic sediments. As PAHs are formed by various processes, source identification using diagnostic ratios can provide insight to PAH emission sources to distinguish between pyrogenic and petrogenic PAH sources. PAH diagnostic ratios were applied as a forensic source apportionment technique to assess aggregate historical sediment data from 31 small craft harbors (SCHs) across Nova Scotia, Canada. Multiple diagnostic ratios suggest that PAHs present in Nova Scotia SCH sediments are pyrogenic (combustion) in origin, while consistently suggesting that coal‐related PAH sources are potential dominant specific sources. National Institute of Standards and Technology Standard Reference Materials (SRMs) were used as reference for coal tar, urban dust, and diesel exhaust particulates in ratio applications. The SRM for coal tar was most similar to Nova Scotia SCH sediments in multiple ratio applications. Diagnostic ratio results were corroborated by comparing the PAH profile of sediments to source profiles from the literature. Results indicate that Nova Scotia SCH sediments follow global trends by exhibiting a dominant pyrogenic PAH signature, and the specific coal‐related PAH signature of Nova Scotia SCH sediments may be influenced by contamination inputs related to historical industrial coal mining and combustion activities in the province.     

Chemical Composition and Acidity of Rain at the Gulf of Iskenderun,North-East Mediterranean

The purpose of the present work was to investigate the chemistry of rain in the Gulf of Iskenderun, North East Mediterranean, Turkey. The Gulf region has a large number of industries. Main industries existing in the region are iron and steel works, fertilizer plants, a cement plant, and several medium and mini size steel mills in addition to the international pipe line terminals. This study aims to apportion the local sources contributing to the overall pollution of the region. To this end a precipitation sampling program was started in January 2000, and over 48 precipitation samples were collected from each of 5 stations located at Iskenderun city center, Iskenderun industrial zone, Payas city center, the campus of Iskenderun Technical College and the campus of Mustafa Kemal University. Samples were analysed for pH, NO₃ ⁺, Cl^-. Ca, Al, Ba, Na, Cd, Co, Cr, Cu, Pb, Li, Mg, Mn, Ni, Zn, Fe, K. Concentrations of metal ions were determined by ICP-AES. NO₃ ^- ions and pH were determined by using NO₃ ^- selective electrode and pH meter, respectively.pH values of the collected samples at the industrial zone and at Payas city center, ranged between 5.02 and 7.38, respectively. NO₃ ^- and metal ions concentrations were highly variable. Concentrations of Ca and Fe ions were higher in the industrial zone and Payas city center. In the other three stations, concentrations of metal ions and NO₃ ^- ion were lower than that of industrial zone and the values of pH ranged between 6 and 7.4. The average pH values at Iskenderun Gulf showed that the precipitation was not acidic, because of the high concentration of Ca. The highest concentrations of Na and Cl ions were recorded in the University campus because the campus is located by the Mediterranean Sea.     

Atmospheric Levels of Nitrogen Oxides at a Greek Oil Refinery Compared with the Urban Measurements in Athens

Oil refining is among the industrial activities that emit considerable amounts of air pollutants into the atmosphere. Nitrogen oxides are important air pollutants that are emitted by oil refineries as products of combustion processes. The ambient air concentrations of nitrogen oxide (NO) and nitrogen dioxide (NO₂) were monitored continuously at a site close to an oil refinery, near the city of Corinth in Greece, during autumn 1997 together with the main meteorological parameters. The contribution of the oil refinery to the measured atmospheric levels of nitrogen oxides was estimated. The ambient air concentration of nitrogen oxides in the area surrounding the oil refinery were generally lower than the ambient air concentrations in the urban area of Athens in Greece, and the NO₂ levels were always below the existing air quality standards. The influence of the refinery emitted NO_x in the photochemical production of ozone seems to be more important in terms of human and vegetation exposure given the high ozone backgrounds measured in the area.     

控制挥发性有机化合物污染的技术

介绍了工业生产中排放的挥发性有机化合物的种类,主要排放源及其处理方法,并着重介绍了世界上比较先进的蓄热式燃烧法和蓄热式催化氧化法。     

Urban Metal Flows – A Case Study of Stockholm. Review and Conclusions

Metals have rapidly accumulated in the anthroposphere, especiallyin urban areas, indicating possible environmental and resource problems. Here, Stockholm City was chosen for a case study of urban metal flows, i.e. metal inflow to, metals in the stock of,and metal outflow from the anthroposphere to the biosphere. Themetal stock of Stockholm is large and still growing. The large amounts of metals in the solid waste fraction totally dominatethe outflow from the city. For major parts of the stock, the emissions from goods in use are negligible. There are, however,goods applications corresponding to significant emissions: e.g. the traffic sector (Cu, Zn, Cr, Ni, Pb), the tapwater system (Cu), roofs/fronts or other metal surfaces (Cu, Zn). Today's known metal flows from the anthroposphere of Stockholm to the biosphere and sewage sludge are quantitatively dominated by Zn(34 ton y^-1) and Cu (14 ton y^-1). Historical and present emissions have resulted in high metal concentrations insediments (especially Cd, Hg and Pb, but also Cu and Zn), groundwater (Cu, Hg) and in soils (Hg, Cu, Pb). At present theannual median concentrations are below the Swedish limits for metals in sewage sludge, even if the safety margins aresmall for Cd, Hg and to some extent Cu. The flows of Cu and Zn to Stockholm soils are high with a significant accumulationindicating an environmental impact in a longer time perspective.High levels of metals in surface sediments in the waterenvironments reflects an ongoing input where these metals aretransported from known (Cu, Zn) and or partly unknown (Cd, Hg, Pb) sources. In future urban areas, monitoring of metal flows must be performed both in the anthroposphere and the biospherein order to have a pro active approach to urban environmentalproblems and to get prompt answers to measures taken.     

Concentrations and Pools of Heavy Metals in Urban Soils in Stockholm,Sweden

The concentrations of heavy metals (Cd, Cr, Cu, Hg, Ni, Pb andZn) and arsenic (As) were surveyed and the metal pools estimatedin soils in Stockholm Municipality. The sampling sites were distributed all over the entire municipality with a higher sampling density in the city centre. Soils were sampled to a maximum depth of 25 to 60 cm. Soil texture, total-C content, electrical conductivity and pH were analysed. Heavy metal concentrations were determined after wet digestion with boiling7 M HNO₃.The results showed a wide range in heavy metal concentrations, as well as in other soil properties. The city centre soils constituted a rather homogeneous group whereas outside this areano geographical zones could be distinguished. These soils were grouped based on present land use, i.e. undisturbed soils, public parks, wasteland (mainly former industrial areas), and roadside soils. The city centre and wasteland soils generally hadenhanced heavy metal concentrations to at least 30 cm depth compared to park soils outside the city centre and rural (arable)soils in the region, which were used to estimate background levels. For example, the mean Hg concentration was 0.9 (max 3.3)mg kg^-1 soil at 0–5 cm and 1.0 (max 2.9) at 30 cm depth in the city centre soils, while the background level was 0,04 mg kg^-1. Corresponding values for Pb were 104 (max 444) and135 (max 339) mg kg^-1, at 0–5 and 30 cm, respectively, while the background level was 17 mg kg^-1.The average soil pools (0–30 cm depth) of Cu, Pb and Zn were 21,38 and 58 g m^-2 respectively, which for Pb was 3–4 timeshigher and for Cu and Zn 1.5–2 times higher than the backgroundlevel. The total amount of accumulated metals (down to 30 cm)in the city centre soils (4.5^*10 ⁶ m² public gardens and green areas) was estimated at 80, 1.1, 120 and 40 t for Cu, Hg, Pb and Zn, respectively. The study showed (1) thatfrom a metal contamination point of view, more homogeneous soilgroups were obtained based on present land use than on geographicdistance to the city centre, (2) the importance of establishing a background level in order to quantify the degree of contamination, and (3) soil samples has to be taken below the surface layer (and deeper than 30 cm) in order to quantify theaccumulated metal pools in urban soils.     

Effects of bed material size distribution, operating conditions and agglomeration phenomenon on heavy metal emission in fluidized bed combustion process

This study investigates the effects of the bed material size distribution, the operating conditions and the agglomeration/defluidization phenomenon on the heavy metal pollutant emissions in the combustion process. After defluidization, the emission concentration of heavy metals increased, because Na may form a low melting eutectic material that enhances bed material adherence. The emission of Cd increased when the feed simulated urban residues contained sodium; however, the presence of Na had no significant effect on the emission of Cr. Furthermore, the Cd emission concentration was low when the material had a Gaussian distribution; however, the decreases in the Cd emission when the bed material had narrow, binary or flat distributions were not significant. The heavy metal Cr showed the same trend. In addition to the operating parameters, the bed material size distribution may influence the heavy metal emissions during combustion processes.     

我国大气铅浓度水平与污染源排放特征

总结和评价了我国大气铅浓度水平、大气铅污染源的主要类型和排放特征,对今后我国大气铅污染发展趋势进行了说明.汽油无铅化以后,我国城市大气环境中的铅浓度有所下降,一般不超过国家标准的限值,但农村地区大气铅污染状况应引起高度重视.涉铅工业排放、燃煤排放和汽车尾气是大气铅污染的主要来源.我国大气铅污染源涉及行业和部门庞杂,伴随着铅产品的整个生命周期.     

Recovery of high purity zinc from filter ash produced during the thermal treatment of waste and inerting of residual materials.

The method described below recovers zinc, a valuable metal that is present in high concentrations in filter ash from the thermal treatment of waste, and returns the filter ash stripped of heavy metals to the combustion process in order to destroy organic substances. On an industrial scale, the heavy metals in the filter ash were mobilized by means of hydrochloric acid in the acidic fluids produced in the flue-gas scrubbing process without the addition of further chemicals. A pilot plant for implementing the selective reactive extraction (SRE) method on the ash extracts, using a highly selective complexant, was operated over a period of several months in order to obtain a concentrated, high-purity zinc salt solution (mono metal solution). A zinc depletion rate of 99.8% in the aqueous extract was achieved using mixer-settler units. The residual zinc concentration in the waste water was then < 2 mg L(-1). By stripping the loaded organic phase, a concentrated, high-purity mono metal solution with 190 g L(-1) zinc was obtained. Zinc metal with a purity > 99.99% is then separated by means of electrolysis. To destroy organic substances present in the filter ash, particularly dioxins and furans, the extracted filter ash cake was returned to the combustion process together with household waste. Plant operation, raw and pure gas parameters, and quality of the bottom ash produced were not impacted by such recirculation. The profitability of the overall process is attributable both to the recovery of valuable zinc metal and to the cost savings made in waste water treatment and in the disposal of the waste combustion residues because the remaining mixture of filter ash and bottom ash can be reused in a combined form. This method therefore supports the sustainable and economically viable reuse of filter ash.     

On-line detection of metal pollutant spikes in MSW incinerator flue gases prior to clean-up

SUWIC's unique mobile metals emissions monitoring laboratory has been used to measure metal pollutant spikes in the flue gas from a municipal solid waste incinerator, prior to gas clean-up. The laboratory has a heated sampling probe that extends into the plant, allowing the simultaneous on-line measurement of the concentrations of more than 30 metals by Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES). As little is known about temporal variation in metal concentrations, this capability is seen as a major advance. The graphs of continuous measurements show that the elemental loading is far from uniform, and that concentrations fluctuate far more than may have been conventionally expected. There are occasional significant spikes in the emission profiles for cadmium and mercury, which are believed to be due to specific items in the waste feed material. Continuous monitoring measurements are of significant value for those seeking to model metal behaviour in combustion and in pollution control devices.     

Urban Metal Management The Example of Lead

The metal metabolism of an urban region, the City ofVienna, was investigated to discuss urban metal management strategies in view of environmental protection and resource conservation. About 90% of the metal stock is located in Vienna's buildings and infrastructure, whilst only 10% is in the landfills. The city stock represents a potential source for diffusive emissions. However, the control of the current environmental policy concentrates mainly on landfill emissions. Diffusive emissions resulting from the losses over the use of metal containing goods in the city are widely dispersed and cannot be easily controlled due to numerous non-point sources. First investigations indicate that for certain applications, the diffusive stock emissions are as significant as other sources. At present, Vienna's known diffusive and point source lead emissions into air and water are about 40 to 50 times higher than comparable past loadings from geogenic Vienna. Furthermore, a life cycle approach from acid car batteries indicates that sustainable lead management should consider flows and stocks in the hinterland of the city too. The city metal stock also represents a potential resource. Leaded water pipes built-in in Vienna's city stock have the potential to produce 1.6 million traditional car batteries. In future such city mining strategies can partly replace ore mining.     

Elemental Concentration in Lichen in Western Anatolia

The deposition patterns of Mn, Fe, Cr, Sb, Zn and As wereinterpreted together with enrichment factor calculations. Samples collected around iron-steel plant had very high concentrations and EF values of Mn, Fe, Cr, Sb and Zn implying that these plants are serious pollution sources in the region. High As concentrations around the settlementareas showed that coal combustion is another important anthropogenic source in the region.     

A preliminary categorization of end-of-life electrical and electronic equipment as secondary metal resources

End-of-life electrical and electronic equipment (EEE) has recently received attention as a secondary source of metals. This study examined characteristics of end-of-life EEE as secondary metal resources to consider efficient collection and metal recovery systems according to the specific metals and types of EEE. We constructed an analogy between natural resource development and metal recovery from end-of-life EEE and found that metal content and total annual amount of metal contained in each type of end-of-life EEE should be considered in secondary resource development, as well as the collectability of the end-of-life products. We then categorized 21 EEE types into five groups and discussed their potential as secondary metal resources. Refrigerators, washing machines, air conditioners, and CRT TVs were evaluated as the most important sources of common metals, and personal computers, mobile phones, and video games were evaluated as the most important sources of precious metals. Several types of small digital equipment were also identified as important sources of precious metals; however, mid-size information and communication technology (ICT) equipment (e.g., printers and fax machines) and audio/video equipment were shown to be more important as a source of a variety of less common metals. The physical collectability of each type of EEE was roughly characterized by unit size and number of end-of-life products generated annually. Current collection systems in Japan were examined and potentially appropriate collection methods were suggested for equipment types that currently have no specific collection systems in Japan, particularly for video games, notebook computers, and mid-size ICT and audio/video equipment.     

Efforts to develop regulations in Korea similar to the US maximum achievable control technology (MACT) regulations for hazardous waste incinerators

The development of regulations patterned after the United States’ requirement for maximum achievable control technology (MACT) to control hazardous air pollutants from major industrial sources in Korea is in progress. Current management practices and installed air pollution control devices were surveyed; emission tests and continuous emission data collected from facilities under operation were assessed considering other MACT requirements such as reporting, report keeping requirements. Emission sampling and air pollutant analysis were carried out at representative hazardous waste incinerators installed with wet-type and dry-type air pollution control devices. Korean and United States Environmental Protection Agency methods were used for sampling and analysis. The major heavy metals emitted were Zn, Ni, Pb, and Cr. The heavy metal removal efficiency of existing air pollution control devices was greater than 99%. The average mercury removal efficiency was more than 30%. Toluene; m,p-xylene; o-xylene; benzene; dichloromethane; styrene; ethylbenzene; 1,3-dichlorobenzene; and 1,2,4-trimethylbenzene were the major volatile organic compounds emitted. The emissions from field tests were compared, reviewed, and analyzed with respect to MACT regulations to check applicability. Finally, draft guidelines were suggested for effective hazardous air pollutant management in Korea.     

炼油恶臭污染治理技术在中国石化天津分公司的应用实例

简述了炼油装置区恶臭污染源的主要分布、恶臭气体组成和排放规律,介绍了恶臭治理的基本方法。通过治理实例,重点分析了目前常用的吸收法、燃烧法、生物法和吸附法等恶臭治理技术的优势和相对不足,并对恶臭治理应用技术方案的选择提出建议。     

Potential and Shortcomings of Numerical Weather Prediction Models in Providing Meteorological Data for Urban Air Pollution Forecasting

The last decade progress in numericalweather prediction (NWP) modelling and studies of urbanatmospheric processes for providing meteorological data forurban air pollution forecasting is analysed on examples ofseveral European meteorological centres. Modern nested NWP models are utilising land-use databasesdown to 1 km resolution or finer, and are approaching thenecessary horizontal and vertical resolution suitable forcity scale. The recent scientific developments in the fieldof urban atmospheric physics and the growing availabilityof high-resolution urban surface characteristics datapromise further improvements of the capability of NWPmodels for this aim. A strategy to improve NWP data forthe urban air pollution forecasting is suggested.