Chemical-mineralogical characterization of C&D waste recycled aggregates from São Paulo, Brazil

This study presents a methodology for the characterization of construction and demolition (C&;D) waste recycled aggregates based on a combination of analytical techniques (X-ray fluorescence (XRF), soluble ions, semi-quantitative X-ray diffraction (XRD), thermogravimetric analysis (TGA-DTG) and hydrochloric acid (HCl) selective dissolution). These combined analytical techniques allow for the estimation of the amount of cement paste, its most important hydrated and carbonated phases, as well as the amount of clay and micas. Details of the methodology are presented here and the results of three representative C&;D samples taken from the São Paulo region in Brazil are discussed. Chemical compositions of mixed C&;D aggregate samples have mostly been influenced by particle size rather than the visual classification of C&;D into red or grey and geographical origin. The amount of measured soluble salts in C&;D aggregates (0.15–25.4 mm) is lower than the usual limits for mortar and concrete production. The content of porous cement paste in the C&;D aggregates is around 19.3% (w/w). However, this content is significantly lower than the 43% detected for the C&;D powders (<0.15 mm). The clay content of the powders was also high, potentially resulting from soil intermixed with the C&;D waste, as well as poorly burnt red ceramic. Since only about 50% of the measured CaO is combined with CO₂, the powders have potential use as raw materials for the cement industry.     

Assessment of medical waste management at a primary health-care center in São Paulo,Brazil

According to the Brazilian law, implementation of a Medical Waste Management Plan (MWMP) in health-care units is mandatory, but as far as we know evaluation of such implementation has not taken place yet. The purpose of the present study is to evaluate the improvements deriving from the implementation of a MWMP in a Primary Health-care Center (PHC) located in the city of São Paulo, Brazil. The method proposed for evaluation compares the first situation prevailing at this PHC with the situation 1 year after implementation of the MWMP, thus allowing verification of the evolution of the PHC performance. For prior and post-diagnosis, the method was based on: (1) application of a tool (check list) which considered all legal requirements in force; (2) quantification of solid waste subdivided into three categories: infectious waste and sharp devices, recyclable materials and non-recyclable waste; and (3) identification of non-conformity practices. Lack of knowledge on the pertinent legislation by health workers has contributed to non-conformity instances. The legal requirements in force in Brazil today gave origin to a tool (check list) which was utilized in the management of medical waste at the health-care unit studied. This tool resulted into an adequate and simple instrument, required a low investment, allowed collecting data to feed indicators and also conquered the participation of the unit whole staff. Several non-conformities identified in the first diagnosis could be corrected by the instrument utilized. Total waste generation increased 9.8%, but it was possible to reduce the volume of non-recyclable materials (11%) and increase the volume of recyclable materials (4%). It was also possible to segregate organic waste (7%), which was forwarded for production of compost. The rate of infectious waste generation in critical areas decreased from 0.021 to 0.018 kg/procedure. Many improvements have been observed, and now the PHC complies with most of legal requirements, offers periodic training and better biosafety conditions to workers, has reduced the volume of waste sent to sanitary landfills, and has introduced indicators for monitoring its own performance. This evaluation method might subsidize the creation and evaluation of medical waste management plans in similar heath institutions.     

Influence of population,income and electricity consumption on per capita municipal solid waste generation in São Paulo State,Brazil

Journal of Material Cycles and Waste Management - Predicting municipal solid waste (MSW) generation is fundamental in choosing and scaling the processes involved in municipal management. The...     

Challenges to reducing post-consumer plastic rejects from the MSW selective collection at two MRFs in São Paulo city,Brazil

Journal of Material Cycles and Waste Management - ​The present study is concerned with an overview of the main aspects of the selective collection from the municipal solid waste in São...     

Assessment of the environmental impact of management measures for the biodegradable fraction of municipal solid waste in São Paulo City

There is increasing concern about landfilling of biodegradable wastes. Therefore, biological treatment processes such as composting and biogasification have been considered as alternative strategies for managing those wastes. In this work, life cycle assessment was employed to compare the environmental impacts of landfilling, composting, and biological treatment of municipal solid waste in S?o Paulo City, Brazil. Energy consumption, recovered resources, and emissions to air and water were quantified and analyzed in terms of their potential contribution to global warming, acidification, and nutrient enrichment impact. The results demonstrated that processes that require high levels of energy consumption, such as wastewater treatment, play an important role in the outcome of environmental impact potentials. It was found that the landfilling of all waste is generally the worst strategy from an environmental point of view. However, significant reductions in the resulting impacts can be accomplished through biogasification and composting of the biodegradable fraction. Regarding composting, the application of a biofilter for gas treatment reduced significantly the gaseous emissions.     

Contribution of cooperative sector recycling to greenhouse gas emissions reduction: A case study of Ribeirão Pires,Brazil

Solid waste, including municipal waste and its management, is a major challenge for most cities and among the key contributors to climate change. Greenhouse gas emissions can be reduced through recovery and recycling of resources from the municipal solid waste stream. In São Paulo, Brazil, recycling cooperatives play a crucial role in providing recycling services including collection, separation, cleaning, stocking, and sale of recyclable resources. The present research attempts to measure the greenhouse gas emission reductions achieved by the recycling cooperative Cooperpires, as well as highlight its socioeconomic benefits. Methods include participant observation, structured interviews, questionnaire application, and greenhouse gas accounting of recycling using a Clean Development Mechanism methodology. The results show that recycling cooperatives can achieve important energy savings and reductions in greenhouse gas emissions, and suggest there is an opportunity for Cooperpires and other similar recycling groups to participate in the carbon credit market. Based on these findings, the authors created a simple greenhouse gas accounting calculator for recyclers to estimate their emissions reductions.     

Critical Loads and Exceedances of Acid Deposition and Associated Forest Growth in the Northern Hardwood and BorealConiferous Forests in Québec,Canada

We used the Québec forest monitoring network (`Réseaud'Étude et de Surveillance des Écosystèmes Forestiers' or RESEF)along with its atmospheric monitoring stations to assess criticalS and N loads and their combined soil acidification exceedancesfor natural ecosystems of the northern hardwood and borealconiferous forests in Québec, Canada. Critical loads (CL) forforest soil acidification were calculated using the simple mass-balance (SMB) approach and with the steady-state PROFILE model.Atmospheric deposition rates for water, S, N, Ca, Mg, Na, and K,for the years 1989–1993, and detailed, plot-specific forest andsoil characteristics were used as input. The SMB model alsorequired information regarding nutrient uptake and storage in theaboveground woody biomass. The CL calculations indicated that,from the 31 RESEF plots, 18 received atmospheric acidic inputs inexcess of their CL (55 and 61% of the hardwood and coniferousplots, respectively). The range of CL exceedance varied from 60to 470 eq ha^-1 yr^-1 for the hardwood stands, and from 10to 590 eq ha^-1 yr^-1 for the coniferous stands. The standswith CL exceedance were mainly located in the western and centralpart of the province. Stand growth associated with exceedanceclass of acidity was determined using the RESEF plots along withselected permanent forest survey plots having similar sitecharacteristics, but for which longer growth records wereavailable. We found a significant negative correlation betweenforest growth rates and critical soil acidification exceedancefor both the northern hardwood and the boreal conifer sites.Specifically, plots with critical load exceedances were found tohave a growth reduction of about 30% during the 1974–1982 andthe 1972–1990 measurement (plots with no soil acidificationexceedance served as a control). While this correlation is notnecessarily causal, it is nevertheless consistent with theexpectation that increased losses of soil base cations on accountof increased soil acidification should and could lead todeteriorating forest health conditions.     

Characteristics of NO2 Pollution in the City of Gothenburg, South-West Sweden—Relation to NO x and O3 Levels, Photochemistry and Monitoring Location

Concentrations of NO₂, NO, and O₃ from a rooftop monitoring station in Gothenburg, Sweden (2002–2006) were analysed to characterise NO₂ pollution. [NO₂] was shown to correlate strongly and non-linearly with [NO _x ] (NO _x ?=?NO?+?NO₂), in line with observations in other cities. The [NO₂] to [NO _x ] fraction fell initially with increasing [NO _x ]. At [NO _x ] levels >200 ppb, the decline in [NO₂]/[NO _x ] with increasing [NO _x ] levelled out and [NO₂]/[NO _x ] converged towards approximately 0.15–0.16, independent of [NO _x ]. Data from a traffic route site showed the same pattern. This value of [NO₂]/[NO _x ] at high [NO _x ] can be interpreted as the NO₂ fraction of the NO _x emissions from vehicle exhaust. Situations with high NO _x pollution and minimum [NO₂]/[NO _x ] were always associated with [O₃] close to zero. Plotting [Ox] (Ox?=?NO₂?+?O₃) vs. [NO _x ] provided a strong linear correlation for situations dominated by local pollution ([NO]/[NO₂]>1). The slope of the regression, a measure of the primary NO₂ fraction in NO _x emissions, was 0.13 during the day and 0.14 during the night. With stronger winds, the rooftop monitoring station became more similar, in terms of NO₂ pollution, to a city street site and a traffic route site, although [NO₂] was almost always higher at the street/traffic route locations. The EU standard for the annual average of [NO₂] (40 μg m^?3) was exceeded, while the hourly standard (200 μg m^?3, not to be exceeded more than 18 times per year by 2010) was not exceeded at any of the sites.     

Life cycle assessment of upflow anaerobic sludge blanket sludge management and activated sludge systems aiming energy use in the municipality of Itajubá, Minas Gerais,Brazil

Journal of Material Cycles and Waste Management - This study aimed to carry out the Life Cycle Analysis (LCA) targeting to decide the better management system for sludge from both Activated Sludge...