Review of strobilurin fungicide chemicals

Strobilurins are natural products isolated and identified from specific fungi. Natural strobilurins were named in the order of their discovery as strobilurin-A followed by strobilurin-B, C, D etc. Their discovery opened the door for new chemistry of synthetic fungicides. Applying Quantitative Structural Activity Relationship (QSAR) on the structures of the natural strobilurins, many pesticide companies were able to discover many synthetic analogues that are more efficacious and more stable fungicides. At present there are about eight synthetic strobilurins in the fungicides worldwide market. Some of these products are worldwide registered for use as agrochemical and some are in the process of registration. This class of fungicides is relatively new, as crop protection products and information about them is still fairly scarce. In this review, syntheses and chemistry of natural and synthetic strobilurins are discussed. Also, the mode of action, efficacy, biotic/abiotic degradation, analytical methods, and agricultural uses are discussed.     

Principles and perspectives

BACKGROUND, AIM AND SCOPE: With respect to the enormous increase of chemical production in the last decades and the tens of thousands of individual chemicals on the market, the permanent improvement of chemical management is a permanent target to achieve the goals of sustainable consumption and production set by the WSSD in Johannesburg 2002. MAIN FEATURES: Several approaches exist to describe sustainability of chemistry. However, commonly agreed criteria are still missing. There is no doubt that products of modern chemistry help to achieve important goals of sustainability and that significant improvements have occurred regarding direct releases from production sites, but several facts demonstrate that chemistry is far from being sustainable. Still too many chemicals exhibit hazardous characteristics and pose a risk to health and environment. Too many resources are needed to produce chemicals and finished products. RESULTS AND CONCLUSION: Therefore, a strategy for sustainability of chemistry should be developed which comprises the following main elements: 1. Sustainable chemicals: sustainable chemical management includes a regulatory framework which makes no difference between new and existing chemicals, contains efficient information flow through the supply chain which allows users to handle chemicals safely and offers an authorisation procedure and/or an efficient restriction procedure for substances of high concern. This regulatory scheme should promote the development of inherently safe chemicals. 2. Sustainable chemical production: Sustainable chemical production needs the development and implementation of emerging alternative techniques like selective catalysis, biotechnology in order to release less CO2 and less toxic by-products, to save energy and to achieve higher yields. Information exchange on best available techniques (BAT) and best environmental practices (BEP) may help to promote changes towards more sustainability. 3. Sustainable products: An integrated product policy which provides a framework for sustainable products promotes the development of products with a long-term use phase, low resource demand in production and use, low emission of hazardous substances and properties suitable for reuse and recycling. This may be promoted by eco-labelling, chemical leasing concepts and extended information measures to enhance the demand of consumers and various actors in the supply chain for sustainable products. RECOMMENDATION AND PERSPECTIVE: Important tools for the promotion of sustainable chemistry are the abolition of barriers for innovation in legislation and within the chemical industry, more transparency for all users of chemical products, a new focus on sustainability in education and research, and a new way of thinking in terms of sustainability.     

Modeling emissions for three-dimensional atmospheric chemistry transport models

Poor air quality is still a threat for human health in many parts of the world. In order to assess measures for emission reductions and improved air quality, three-dimensional atmospheric chemistry transport modeling systems are used in numerous research institutions and public authorities. These models need accurate emission data in appropriate spatial and temporal resolution as input. This paper reviews the most widely used emission inventories on global and regional scales and looks into the methods used to make the inventory data model ready. Shortcomings of using standard temporal profiles for each emission sector are discussed, and new methods to improve the spatiotemporal distribution of the emissions are presented. These methods are often neither top-down nor bottom-up approaches but can be seen as hybrid methods that use detailed information about the emission process to derive spatially varying temporal emission profiles. These profiles are subsequently used to distribute bulk emissions such as national totals on appropriate grids. The wide area of natural emissions is also summarized, and the calculation methods are described. Almost all types of natural emissions depend on meteorological information, which is why they are highly variable in time and space and frequently calculated within the chemistry transport models themselves. The paper closes with an outlook for new ways to improve model ready emission data, for example, by using external databases about road traffic flow or satellite data to determine actual land use or leaf area. In a world where emission patterns change rapidly, it seems appropriate to use new types of statistical and observational data to create detailed emission data sets and keep emission inventories up-to-date.

Implications: Emission data are probably the most important input for chemistry transport model (CTM) systems. They need to be provided in high spatial and temporal resolution and on a grid that is in agreement with the CTM grid. Simple methods to distribute the emissions in time and space need to be replaced by sophisticated emission models in order to improve the CTM results. New methods, e.g., for ammonia emissions, provide grid cell–dependent temporal profiles. In the future, large data fields from traffic observations or satellite observations could be used for more detailed emission data.     

Acid rain: chemistry and transport

This review describes the more important features of the emission, chemistry, transport and deposition of pollutants involved in acid deposition. Global emissions, both natural and man-made, of sulphur and nitrogen oxides are discussed and examples of spatial distributions and trends over the last century presented. The more significant chemical and physical processes involved in the transformation of the primary emissions into their acidic end products are described, including a summary of the approximate timescales of the processes involved. Measurements and modelled calculations of spatial and temporal patterns in the deposition of acidic pollutants by both wet and dry pathways are presented.     

Concentrations of synthetic musk compounds in personal care and sanitation products and human exposure profiles through dermal application

Synthetic musks, such as 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene (AHTN) and 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-gamma-2-benzopyran (HHCB), musk ketone (MK) and musk xylene (MX), are used as an alternative for natural musk. Due to their widespread use, these synthetic compounds turned up in different environmental compartments, such as wastewater, human and animal tissues. Yet, little is known about their distribution and occurrence in personal care and household products, information needed in order to evaluate the different human exposure routes. This paper gives an overview of the synthetic musk levels in six different product categories: body lotions, perfumes, deodorants, hair care products, shower products and sanitation products. Especially body lotions, perfumes and deodorants contained high levels of synthetic musks. Maximum concentrations of HHCB, AHTN, MX and MK were 22 mg g(-1), 8 mg g(-1), 26 microg g(-1) and 0.5 microg g(-1), respectively. By combining these results with the average usage of consumer products, low-, medium- and high-exposure profiles through dermal application could be estimated. HHCB was the highest contributor to the total amount of synthetic musks in every exposure profile (18-23 700 microg d(-1)). Exposure to MK and MX did not increase substantially (10-20-fold) between low- and high-exposure profiles, indicating that these compounds cover a less broad range. In comparison, exposure to HHCB and AHTN increased up to 10 000 fold between low- and high-exposure.     

Effects of Atmospheric Nitrogen Deposition on Remote Freshwater Ecosystems

We review known and hypothesized effects of nitrogen (N) deposition owing to human activities on the chemistry, organisms, and ecosystem processes of remote oligotrophic freshwaters. Acidification is the best-known effect of N deposition on water chemistry, but additional effects include increased nutrient availability and alteration of the balance between N and other nutrients. Our synthesis of the literature, framed in a comprehensive model for the effects of N deposition on natural ecosystems, shows that all these effects can reduce biological diversity and alter ecosystem processes in remote freshwaters. N deposition is projected to grow worldwide in the near future and will interact with other global changes. Present effects on these fragile ecosystems may be only early signs of more radical impacts ahead.     

Ecofriendly application of coconut coir (Cocos nucifera) extract for silk dyeing

Environmental Science and Pollution Research - The worldwide resurgence of natural dyes in all fields is due to the carcinogenic effects of effluent loads shed by synthetic industries. Coconut coir...     

Microbial phytotoxins as potential herbicides

Abstract

Microbes are sources of a diverse array of phytotoxic compounds. These compounds are generally structurally different from commercial herbicides, targeting different molecular sites of action within the plant. These novel structures and sites can be excellent leads for the discovery and development of safer synthetic herbicides. Microbial phytotoxins are often more environmentally benign than synthetic herbicides. Examples of phytotoxins from fungi (AAL‐toxin, cornexistin, cyperin, and tentoxin) with novel structures and sites of action are discussed. AAL‐toxin is toxic to a wide variety of weeds at very low dose rates. AAL‐toxin and many of its analogues kill plants by inhibiting a ceramide synthase‐like enzyme, causing rapid accumulation of free sphingoid bases that disrupt membranes. Cornexistin appears to be metabolically cnverted to an inhibitor of certain aspartate amino transferase isoenzymes. Its activity can be reversed by feeding aspartate and glutamate or with tricarboxylic acid cycle intermediates. Its activity is much like that of (aminooxy)acetate. Cyperin is a diphenylether phytotoxin that inhibits protoporphyrinogen oxidase, but does not kill plants by this mechanism. It appears to have other effects on porphyrin metabolism. Tentoxin is toxic by two mechanisms. It disrupts chloroplast development by inhibiting the processing of a nuclear‐coded plastid protein, and it also inhibits photophosphorylation by acting as an energy transfer inhibitor of coupling factor 1 ATPase. Other examples of phytotoxins from microbes with promise as herbicides will be mentioned.     

Safening activity of natural hydroxamic acids and analogous compounds against herbicide injury to maize

Abstract

Safening activities of natural compounds DIMBOA, DIBOA, and MBOA, as well as synthetic 1,4‐benzoxazin‐3‐ones were tested against acetochlor and EPTC injuries to maize. No safening activities of natural products and from low to moderate activity of synthetic benzoxazinones were observed. In order to explain inefficacy of natural compounds we studied the influence of these molecules on enzymes participating in metabolic detoxication of acetochlor and EPTC. Pretreatment with DIMBOA elevated maize cytochrome P450 levels. Pretreatments with chemicals containing 1,4‐benzoxazin‐3‐one backbone did not alter glutathione S‐transferase enzyme activities. However, all natural products inhibited glutathione S‐transferase activity of roots and shoots in vitro after addition to the enzyme. Safening ineffectiveness of natural hydroxamic acids may be explained by their inhibitory effects on GST enzymes due to their reaction with sulfhydryl groups on the enzyme.     

Pattern and sources of naturally produced organohalogens in the marine environment: biogenic formation of organohalogens

The pattern of organohalogens found in the marine environment is complex and includes compounds, only assignable to natural (chloromethane) or anthropogenic (hexachlorobenzene, PCBs) sources as well as compounds of a mixed origin (trichloromethane, halogenated methyl phenyl ether).The chemistry of the formation of natural organohalogens is summarized. The focus is put on volatile compounds carrying the halogens Cl, Br, and I, respectively. Though marine natural organohalogens are quite numerous as defined components, they are mostly not produced as major compounds. The most relevant in terms of global annual production is chloromethane (methyl chloride). The global atmospheric mixing ratio requires an annual production of 3.5-5 million tons per year. The chemistry of the group of haloperoxidases is discussed. Incubation experiments reveal that a wide spectrum of unknown compounds is formed in side reactions by haloperoxidases in pathways not yet understood.     

Synthesis of environmentally relevant fluorinated surfactants--a review

In the past years there has been a growing interest in fluorinated persistent organic pollutants such as perfluorooctanesulfonic acid, perfluorooctanesulfonamides, perfluorinated carboxylic acids and fluorotelomer alcohols. Although these compounds have probably been present in the environment for many decades, we are only now beginning to realize that these environmental contaminants may have serious environmental and health effects. This article gives a state-of-the-art review of synthetic approaches that have been employed for the synthesis of these environmentally relevant fluorinated compounds. Perfluorooctanesulfonic acid derivatives, in particular, pose a problem because only a few perfluorooctanesulfonic acid derivatives are available from commercial sources--a fact that limits the ability of researchers worldwide to further study these compounds. Because of the limited literature available, this article also describes synthetic approaches for shorter chain homologues or perfluoroether analogues that can potentially be applied for the synthesis of perfluorooctanesulfonic acid derivatives. The preparation of typical starting materials for the synthesis of perfluorooctanesulfonic acid derivatives such as the perfluoroalkanesulfonyl fluorides and chlorides will be discussed. Subsequently, their conversion into relevant perfluoroalkane sulfonate salts (R(F)SO3M), sulfonamides (R(F)SO2NH2), N-alkyl sulfonamides (R(F)SO2NHR, R = alkyl), N,N-dialkyl sulfonamides (R(F)SO2NR2, R = alkyl), sulfonamidoethanol (R(F)SO2NRCH2CH2OH, R = -H, -CH3 or -C2H5) and sulfonamidoacetates (R(F)SO2NRCH2CO2H, R = -H, -CH3 or -C2H5) will be described. Many perfluorinated carboxylic acids and fluorotelomer alcohols are available from commercial sources. The review of the synthesis of these two classes of fluorinated compounds includes a review of their industrial synthesis and the synthesis of relevant degradation products.     

Midwest/western/eastern U.S. precipitation and aerosol sulfate: Differences attributable to natural source inputs?

Factor analysis comparisons between the MAP3S network and Minnesota precipitation chemistry data show marked differences. An assessment of ambient aerosol and precipitation chemistry data obtained at several Colorado and Minnesota sites suggests that natural source inputs may contribute to the sulfate observed in ambient aerosol and at least partly, explain the marked differences of Minnesota and Colorado precipitation chemistry data from that of MAP3S (eastern U.S.). However, a recently proposed mechanism, SO₂ to SO₄ conversion on the surface of dust particles, may be more important than natural sources in explaining western and midwestern precipitation chemistry data. It is concluded that these predominantly non-acidic SO₄ sources may explain the poor association between the H⁺ and SO₄ in many western and some midwestern precipitation chemistry data sets.     

Atmospheric composition change – global and regional air quality

Air quality transcends all scales with in the atmosphere from the local to the global with handovers and feedbacks at each scale interaction. Air quality has manifold effects on health, ecosystems, heritage and climate. In this review the state of scientific understanding in relation to global and regional air quality is outlined. The review discusses air quality, in terms of emissions, processing and transport of trace gases and aerosols. New insights into the characterization of both natural and anthropogenic emissions are reviewed looking at both natural (e.g. dust and lightning) as well as plant emissions. Trends in anthropogenic emissions both by region and globally are discussed as well as biomass burning emissions. In terms of chemical processing the major air quality elements of ozone, non-methane hydrocarbons, nitrogen oxides and aerosols are covered. A number of topics are presented as a way of integrating the process view into the atmospheric context; these include the atmospheric oxidation efficiency, halogen and HO_x chemistry, nighttime chemistry, tropical chemistry, heat waves, megacities, biomass burning and the regional hot spot of the Mediterranean. New findings with respect to the transport of pollutants across the scales are discussed, in particular the move to quantify the impact of long-range transport on regional air quality. Gaps and research questions that remain intractable are identified. The review concludes with a focus of research and policy questions for the coming decade. In particular, the policy challenges for concerted air quality and climate change policy (co-benefit) are discussed.     

Comparing the sensitivity of soil invertebrates to pesticides with that of Eisenia fetida

The sole routine testing of the standard earthworm Eisenia fetida for the terrestrial risk assessment of pesticides has been under much debate since other soil invertebrates may be more sensitive than this standard test species. However, the very low availability of laboratory toxicity data for taxa other than E. fetida has greatly hampered sensitivity comparisons. In the present study, the relative tolerance (T_rel) approach was used to enable comparing toxicity thresholds obtained from the US-EPA ECOTOX database, for main terrestrial taxonomic groups and pesticidal types of action (insecticides, fungicides, herbicides, and other) separately. Analyses confirmed previously reported lower and higher sensitivity of collembolans to fungicides and insecticides, respectively. However, various other discrepancies in susceptibility relative to E. fetida were encountered as indicated by species sensitivity distributions and/or calculated 95% confidence intervals of T_rel values. Arachnids and isopods were found to be more sensitive to insecticides, and nematodes to fungicides, as compared to E. fetida. Implications of study findings for the terrestrial risk assessment of pesticides are discussed.     

Review of measured concentrations of triphenyltin compounds in marine ecosystems and meta-analysis of their risks to humans and the environment

The state of scientific knowledge regarding analytical methods, environmental fate, ecotoxicity and ecological risk of triphenyltin (TPT) compounds in marine ecosystems as well as their exposure and health hazard to humans was reviewed. Since the 1960s, TPT compounds have been commonly applied as biocides for diverse industrial and agricultural purposes. For instance, they are used as active ingredients in antifouling systems on marine vessels and mariculture facilities, and as fungicides in agriculture. Due to their intensive use, contamination of coastal waters by TPT and its products of transformation has become a worldwide problem. The proportion of quantified TPT to total phenyltin compounds in the marine environment provides evidence that TPT is photodegradable in water and sediment but resistant to biotransformation. Concentrations of TPT in marine biota are consistently greater than concentrations in water and sediment, which implies potential of TPT to bioaccumulate. TPT is toxic to both marine plants and animals. The predicted no effect concentration (PNEC) for TPT, as determined by use of the species sensitivity distribution approach, is 0.64 ng L⁻¹. In some parts of the world, concentrations of TPT in seawater exceed the PNEC, indicating that TPT can pose risks to marine life. Although there is negligible risk of TPT to average human consumers, TPT has been detected in blood of Finnish people and the concentration was greater in fishermen who ate more seafood. It is, therefore, advocated to initiate regular monitoring of TPT in blood and breast milk of populations that consume greater amounts of seafood.     

The role of carbonate radical in limiting the persistence of sulfur-containing chemicals in sunlit natural waters

Carbonate radical (*CO3-) is a selective oxidant that may be important in limiting the persistence of a number of sulfur-containing compounds in sunlit natural waters. Thioanisole, dibenzothiophene (DBT), and fenthion were selected to investigate the degradation pathway initiated by *CO3-; electron-rich sulfur compounds are particularly reactive towards the *CO3-. Using HPLC, GC, GC-MS and LC-MS for structural confirmation, the major photodegradation products of thioanisole and DBT were the corresponding sulfoxides. The sulfoxide products were further oxidized through reaction with *CO3- to the corresponding sulfone derivatives. Fenthion showed a similar pathway with appearance of fenthion sulfoxide as the major product. The proposed mechanism involves abstraction of an electron on sulfur to form a radical cation, which is then oxidized by dissolved oxygen. Each of the sulfur probes were further investigated in a sunlight simulator under varying matrix conditions. The highest rate constants occurred in the *CO3- matrix, and the lowest occurred in a matrix of dissolved organic carbon (DOC) and bicarbonate. In synthetic and natural field water, thioanisole photodegraded faster than under direct photolysis, with half-lives of 75.1 and 85.8 min, respectively. Fenthion photodegraded more rapidly than thioanisole. DBT photodegraded rapidly in a *CO3- matrix with a half-life of 24.8 min, while the half-life of direct photolysis was 350 min. Photodegradation products of each compound were also investigated. Ultimately, *CO3- was found to contribute toward the photodegradation of sulfur-containing compounds in natural waters.     

Some aspects of toxic contaminants in herbal medicines

A World Health Organisation survey indicated that about 70-80% of the world populations rely on non-conventional medicine mainly of herbal sources in their primary healthcare. In recent years, we have witnessed the increasing growth in popularity of over-the-counter (OTC) health foods, nutraceuticals, and medicinal products from plants or other natural sources in developed countries. This indirectly indicates that the public is not satisfied with their orthodox medical (OM) treatment. Such increase in popularity has also brought concerns and fears over the professionalism of practitioners, and quality, efficacy and safety of their treatment methods and products from herbal and natural sources available in the market. Over the past decade several news-catching episodes in developed communities indicated adverse effects, sometimes life threatening, allegedly arisen consequential to taking of OTC herbal products or traditional medicines from various ethnic groups. These OTC products may be contaminated with excessive or banned pesticides, microbial contaminants, heavy metals, chemical toxins, and for adulterated with orthodox drugs. Excessive or banned pesticides, heavy metals and microbial contaminants may be related to the source of these herbal materials, if they are grown under contaminated environment or during collection of these plant materials. Chemical toxins may come from unfavourable or wrong storage conditions or chemical treatment due to storage. The presence of orthodox drugs can be related to unprofessional practice of manufacturers. Some of these environment related factors can be controlled by implementing standard operating procedures (SOP) leading to Good Agricultural Practice (GAP), Good Laboratory Practice (GLP), Good Supply Practice (GSP) and Good Manufacturing Practice (GMP) for producing these medicinal products from herbal or natural sources. The public's belief that herbal and natural products are safer than synthetic medicines can only be ascertained by imposing regulatory standards on these products that should be manufactured using these Good Practices. Using Chinese medicines, as examples, this paper illustrate how advances in chemical and biomedical analysis would help to detect intentional and unintentional toxic contaminants in herbal substances. The paper also summarises how modernization and progress are being carried out to get the best out of Chinese medicines for public healthcare.     

The Importance of Natural Processes in Understanding Ecosystem Change: A Case Study of Limed Lakes

In order to determine what effects human activities have on natural processes, it is important to thoroughly understand those processes. Unfortunately, we know little about what natural processes are operating, and even less about how they have functioned historically. This paper discusses the importance of natural processes in affecting surface water acidification and the necessity for developing quantitative estimates of natural, as well as anthropogenic, contributions to the acidification of surface waters. A review of the literature and the analysis of chemistry data from six limed lakes in New York and Massachusetts have identified a number of possible processes that may play important roles in acidifying surface waters. At present, these processes are poorly understood and require further research. Once we have such knowledge, we will be able to clearly see the effects of human activities on natural processes and modify those activities in ways that will mitigate negative impact in a predictable manner.     

The chemical exploitation of nickel phytoextraction: An environmental, ecologic and economic opportunity for New Caledonia

Herein, we explore the outlines of an innovative method based on the chemical recovery of metal-rich biomass produced in phytoextraction technologies. Taking advantage of the adaptive capacity of some New Caledonian plants to hyperaccumulate Ni²⁺ cations in their aerial parts, this technique is based on the direct use of metals derived from plants as “Lewis acid” catalysts in organic chemistry. Metallic cations contained in New Caledonian nickel hyperaccumulators are recovered through a simple cost-effective process and serve the preparation of heterogeneous catalysts used in synthetic transformations allowing access to molecules with high added-value. The design of all processes is in line with the principles of green chemistry; it is adapted to the new economic constraints; it offers a new relevant outlet for metal-rich biomass; and it represents an alternative to non-renewable mineral materials.     

A review of biomarker compounds as source indicators and tracers for air pollution

An overview of the application of organic geochemistry to the analysis of organic matter on aerosol particles is presented here. This organic matter is analyzed as solvent extractable bitumen/ lipids by gas chromatography-mass spectrometry. The organic geochemical approach assesses the origin, the environmental history and the nature of secondary products of organic matter by using the data derived from specific molecular analyses. Evaluations of production and fluxes, with cross-correlations can thus be made by the application of the same separation and analytical procedures to samples from point source emissions and the ambient atmosphere. This will be illustrated here with typical examples from the ambient atmosphere (aerosol particles) and from emissions of biomass burning (smoke). Organic matter in aerosols is derived from two major sources and is admixed depending on the geographic relief of the air shed. These sources are biogenic detritus (e.g., plant wax, microbes, etc.) and anthropogenic particle emissions (e.g., oils, soot, synthetics, etc.). Both biogenic detritus and some of the anthropogenic particle emissions contain organic materials which have unique and distinguishable compound distribution patterns (C₁₄-C₄₀). Microbial and vascular plant lipids are the dominant biogenic residues and petroleum hydrocarbons, with lesser amounts of the pyrogenic polynuclear aromatic hydrocarbons (PAH) and synthetics (e.g., chlorinated compounds), are the major anthropogenic residues. Biomass combustion is another important primary source of particles injected into the global atmosphere. It contributes many trace substances which are reactants in atmospheric chemistry and soot paniculate matter with adsorbed biomarker compounds, most of which are unknown chemical structures. The injection of natural product organic compounds into smoke occurs primarily by direct volatilization/steam stripping and by thermal alteration based on combustion temperature. Although the molecular composition of organic matter in smoke particles is highly variable, the molecular tracers are generally still source specific. Retene has been utilized as a tracer for conifer smoke in urban aerosols, but is not always detectable. Dehydroabietic acid is generally more concentrated in the atmosphere from the same emission sources. Degradation products from biopolymers (e.g., levoglucosan from cellulose) are also excellent tracers. An overview of the biomarker compositions of biomass smoke types is presented here. Defining additional tracers of thermally-altered and directly-emitted natural products in smoke aids the assessment of the organic matter type and input from biomass combustion to aerosols. The precursor to product approach of compound characterization by organic geochemistry can be applied successfully to provide tracers for studying the chemistry and dispersion of ambient aerosols and smoke plumes. Presented at the 6th FECS Conference on Chemistry and the Environment, Atmospheric Chemistry and Air Pollution, August 26–28, 1998, Copenhagen.