Modeling of spatial and temporal variations of ozone-NOx-VOC sensitivity based on photochemical indicators in China

Comprehensive air quality model with extensions (CAMx)-decoupled direct method (DDM) was used to simulate ozone-NO_x-VOCs sensitivity of for May–November in 2016–2018 in China. Based on the relationship between the simulated ozone (O₃) sensitivity values and the ratio of formaldehyde (HCHO) to NO₂ (FNR) and the ratio of production rate of hydrogen peroxide (H₂O₂) to production rate of nitric acid (HNO₃) ($P_{{\mathrm{H}}_2{\mathrm{O}}_2}/P_{\text{HN}{\mathrm{O}}_3}$), the localized range of FNR and $P_{{\mathrm{H}}_2{\mathrm{O}}_2}/P_{\text{HN}{\mathrm{O}}_3}$ thresholds in different regions in China were obtained. The overall simulated FNR values are about 1.640–2.520, and $P_{{\mathrm{H}}_2{\mathrm{O}}_2}/P_{\text{HN}{\mathrm{O}}_3}$ values are about 0.540–0.830 for the transition regime. Model simulated O₃ sensitivities or region specific FNR or $P_{{\mathrm{H}}_2{\mathrm{O}}_2}/P_{\text{HN}{\mathrm{O}}_3}$ thresholds should be applied to ensure the accurate local O₃ sensitivity regimes. Using the tropospheric column FNR values from ozone monitoring instrument (OMI) satellite data as an indicator with the simulated threshold values, the spatial distributions of O₃ formation regimes in China are determined. The O₃ sensitivity regimes from eastern to central China are gradually from VOC-limited, transition to NO_x-limited spatially, and moving toward to transition or NO_x-limited regime from 2005 to 2019 temporally.     

Effectiveness evaluation of water-sprinkling in controlling urban fugitive road dust based on TRAKER method: A case study in Baoding, China

Fugitive road dust (FRD) contributes a great deal to urban rainwater and air pollution and is commonly controlled by water-sprinkling in most Chinese cities. However, there is a lack of information on its effectiveness. We used the Testing Re-entrained Aerosol Kinetic Emissions from Roads (TRAKER) method to monitor different types of roads in Baoding city before and within 1 hr after water-sprinkling and obtained the road dirtiness index (a) and PM concentration in the road environment ($T_{\mathrm{T}}^{*}$), to evaluate the removal efficiency for PM deposited on the road surface (${\eta }_a$) and the reduction efficiency for the PM concentration in the road environment (${\eta }_{\text{PM}}$). The results give that the ${\eta }_a$ for three types of roads is ranked: branch road (87%-–100%) > major arterial road (80%-83%) > minor arterial road (68%-77%), and the ${\eta }_{\text{PM}}$ ranked: minor arterial road (70%) > branch road (46%-58%) > major arterial road (37%-53%). The ${\eta }_a$ and ${\eta }_{\text{PM}}$ varied non-linearly with time and presented a quadratic curve. The average effective control time (${\eta }_{\mathit{a}}$> 0) was 62 min on the major and minor arterial roads, and much longer than 1 hr on branch roads. The ${\eta }_{\text{PM}}$ values diminished completely by 72 min on average from the end of sprinkling for the three types of roads. Water-sprinkling can remove PM₁₀ particles from the road surface and reduce their concentration in the road environment more thoroughly than PM_2.5. Our findings could be helpful for controlling urban FRD emissions more efficiently and precisely.     

Competitive role of nitrogen functionalities of N doped GO and sensitizing effect of Bi2O3 QDs on TiO2 for water remediation

The promising solar irradiated photocatalyst by pairing of bismuth oxide quantum dots (BQDs) doped TiO₂ with nitrogen doped graphene oxide (NGO) nanocomposite (NGO/BQDs-TiO₂) was fabricated. It was used for degradation of organic pollutants like 2,4-dichlorophenol (2,4-DCP) and stable dyes, i.e. Rhodamine B and Congo Red. X-ray diffraction (XRD) profile of NGO showed reduction in oxygenic functional groups and restoring of graphitic crystal structure. The characteristic diffraction peaks of TiO₂ and its composites showed crystalline anatase TiO₂. Morphological images represent spherical shaped TiO₂ evenly covered with BQDs spread on NGO sheet. The surface linkages of $\text{NO}?\mathrm{O}?\text{Ti}$, $\mathrm{C}?\mathrm{O}?\text{Ti}$, $\mathrm{B}\mathrm{i}?\mathrm{O}?\text{Ti}$ and vibrational modes are observed by Fourier transform infrared spectroscopy (FTIR) and Raman studies. BQDs and NGO modified TiO₂ results into red shifting in visible region as studied in diffused reflectance spectroscopy (DRS). NGO and BQDs in TiO₂ are linked with defect centers which reduced the recombination of free charge carriers by quenching of photoluminescence (PL) intensities. X-ray photoelectron spectroscopy (XPS) shows that no peak related to $\mathrm{C}?\mathrm{O}$ in NGO/BQDs-TiO₂ is observed. This indicated that doping of nitrogen into GO has reduced some oxygen functional groups. Nitrogen functionalities in NGO and photosensitizing effect of BQDs in ternary composite have improved photocatalytic activity against organic pollutants. Intermediate byproducts during photo degradation process of 2,4-DCP were studied through high performance liquid chromatography (HPLC). Study of radical scavengers indicated that ${\mathrm{O}}_2^{·?}$ has significant role for degradation of 2,4-DCP. Our investigations propose that fabricated nanohybrid architecture has potential for degradation of environmental pollutions.     

Chemical and olfactive impacts of organic matters on odor emission patterns from the simulated construction and demolition waste landfills

The explosive increase of construction and demolition waste (CDW) caused the insufficient source separation and emergency disposal at domestic waste landfills in many developing countries. Some organic fractions were introduced to the CDW landfill process and resulted in serious odor pollution. To comprehensively explore the impacts of organic matters on odor emission patterns, five CDW landfills (OIL), with organic matters/ inert CDW components (O/I) from 5% to 30%, and the control group only with inert components (IL) or organics (OL) were simulated at the laboratory. The chemical and olfactive characters of odors were evaluated using the emission rate of 94 odorants content (ER_total), theory odor concentration (TOC_total), and e-nose concentration (ER_ENC), and their correlations with waste properties were also analyzed. It was found that the main contributors to ER_total (IL: 93.0% NH₃; OIL: 41.6% sulfides, 31.0% NH₃, 25.9% oxygenated compounds) and TOC total (IL: 64.1% CH₃SH, 28.2% NH₃; OIL: 71.7% CH₃SH, 24.8% H₂S) changed significantly. With the rise of O/I, ER_total, TOC_total, and ER_ENC increased by 10.9, 20.6, and 2.1 times, respectively. And the organics content in CDW should be less than 10% (i.e., DOC<101.3 mg/L). The good regressions between waste properties (DOC, DN, pH) and ${\mathrm{ER}}_{\stackrel{?}{\mathrm{ENC}}}$ (r=0.86, 0.86, -0.88, p<0.05), ${\mathrm{TOC}}_{\stackrel{?}{\mathrm{total}}}$ (r=0.82, 0.79, -0.82, p<0.05) implied that the carbon sources and acidic substances relating to organics degradation might result in that increase. Besides, the correlation analysis results (${\mathrm{ER}}_{\stackrel{?}{\mathrm{ENC}}}$ vs. ${\mathrm{TOC}}_{\stackrel{?}{\mathrm{total}}}$, r=0.96, p<0.01; vs. ${\mathrm{ER}}_{\stackrel{?}{\mathrm{total}}}$, r=0.86, p<0.05) indicated that e-nose perhaps was a reliable odor continuous monitoring tool for CDW landfills.     

Experimental and theoretical studies on NO selective catalytic oxidation over α-MnO2

Based on the experimental and theoretical methods, the NO selective catalytic oxidation process was proposed. The experimental results indicated that lattice oxygen was the active site for NO oxide over the $\mathrm{\alpha }$-MnO₂(110) surface. In the theoretical study, DFT (density functional theory) and periodic slab modeling were performed on an $\mathrm{\alpha }$-MnO₂(110) surface, and two possible NO oxidation mechanisms over the surface were proposed. The non-defect $\mathrm{\alpha }$-MnO₂(110) surface showed the highest stability, and the surface O_s (the second layer oxygen atoms) position was the most active and stable site. O₂ molecule enhanced the joint adsorption process of two NO molecules. The reaction process, including O₂ dissociation and O=N-O-O-N=O formation, was calculated to carry out the NO catalytic oxidation mechanism over $\mathrm{\alpha }$-MnO₂(110). The results showed that NO oxidation over the $\mathrm{\alpha }$-MnO₂(110) surface exhibited the greatest possibility following the route of O=N-O-O-N=O formation. Meanwhile, the formation of O=N-O-O-N=O was the rate-determining step.     

Adsorptive removal of phosphate by the bimetallic hydroxide nanocomposites embedded in pomegranate peel

This study aimed to fabricate new and effective material for the efficiency of phosphate adsorption. Two types of adsorbent materials, the zirconium hydroxides embedded in pomegranate peel (Zr/Peel) and zirconium-lanthanum hydroxides embedded in pomegranate peel (Zr–La/Peel) were developed. Scanning electronic microscopy (SEM), x-ray photoelectron spectroscopy (XPS) and x-ray diffraction (XRD) were evaluated to give insight into the physicochemical properties of these adsorbents. Zr–La/Peel exceeded the adsorption efficiency of Zr/Peel adsorbents in batch adsorption experiments at the same pH level. The peel as a host can strive to have a strong “shielding effect” to increase the steadiness of the entrenched Zr and La elements. La and Zr are hydroxide metals that emit many hydrogen ions during the hydrolysis reaction, which contribute to protonation and electrostatic attraction. The highest adsorption capacity of La–Zr/Peel for phosphate was calculated to be 40.21 mg/g, and pseudo second-order equation is very well fitted for kinetic adsorption. Phosphate adsorption efficiency was reduced by an increase of pH. With the background of coexisting Cl^?, little effect on adsorption efficiency was observed, while adsorption capacities were reduced by almost 20–30% with the coexistence of ${{\text{SO}}_4}^{2?}$, ${{\text{NO}}_3}^{?}$ and humic acid (HA).     

Enhanced phosphate removal using zirconium hydroxide encapsulated in quaternized cellulose

Zirconium-based materials are efficient adsorbent for aqueous phosphate removal. However, current zirconium-based materials still show unsatisfied performance on adsorption capacity and selectivity. Here, we demonstrate a zirconium hydroxide encapsulated in quaternized cellulose (QC–Zr) for the selective phosphate removal. Zirconium hydroxide nanoparticles were simultaneously generated in situ with the QC framework and firmly anchored in the three-dimensional (3D) cross-linked cellulose chains. The maximum P adsorption capacity of QC–Zr was 83.6 mg P/g. Furthermore, the QC–Zr shows high P adsorption performance in a wide pH range, generally due to the electrostatic effects of quaternized cellulose. The enhanced adsorption of P was also achieved in the presence of competing anions (including Cl^?, NO₃^?, ${\text{SO}}_4^{2?}$, ${\text{SO}}_4^{\mathrm{4}?}$) and humic acid (HA) even at a molar ratio up to 20 levels. The column adsorption capacity of QC–Zr reached 4000 bed volumes (BV) at EBCT = 0.5 min as the P concentration decreased from 2.5 to 0.5 mg/L. Mechanism study revealed that both –N⁺(CH₃)₃ groups and zirconium hydroxide were involved in phosphate adsorption via electrostatic interactions between –N⁺(CH₃)₃ and phosphate, and the formation of zirconium hydrogen phosphate (Zr(HPO₄)x). The ³¹P nuclear magnetic resonance (NMR) study implied that P surface–precipitated and inner–sphere complexed with zirconium hydroxide at a ratio of 3:1.     

Effects of sludge age on anaerobic acidification of waste activated sludge: Volatile fatty acids production and phosphorus release

Effects of sludge age on volatile fatty acids (VFAs) production and Phosphorus (P) release during anaerobic acidification of waste activated sludge (WAS) were investigated. Sequencing batch reactors (SBR) fed with simulating domestic sewage were applied to produce WAS of different sludge ages, and batch tests were used for anaerobic acidification. The maximum dissolved total organic carbon, release of  ${\text{PO}}_4^{3+}?\mathrm{P}$, and accumulation of acetate (C2), propionate (C3), butyrate (C4), and valerate (C5) decreased by 56.2%, 55.8%, 52.6%, 43.7%, 82.4% and 84.8%, respectively, as the sludge age of WAS increased from 5 to 40 days. Limited degradation of protein played a dominating role in decreasing DTOC and VFAs production. Moreover, the increase in molecular weight of organics and organic nitrogen content in the supernatant after acidification suggested that the refractory protein in WAS increased as sludge age extended. Although the production of C2, C3, C4, and C5 from WAS decreased as the sludge age increased, the proportions of C2 and C3 in VFAs increased, which might be due to the declined production of C5 from protein and the faded genus Dechlorobacter. Keeping sludge age of WAS at a relatively low level (<10 days) is more appropriate for anaerobic acidification of WAS as internal carbon sources and P resource.     

Influence of modified biochar supported sulfidation of nano-zero-valent-iron (S-nZVI/BC) on nitrate removal and greenhouse gas emission in constructed wetland

In this study, the biochar (BC) produced from sawdust, sludge, reed and walnut were used to support sulfidation of nano-zero-valent-iron (S-nZVI) to enhance nitrate (${\text{NO}}_3^{-}$-N) removal and investigate the impact on greenhouse gas emissions. Batch experiment results showed the S-nZVI/BC_{sawdust (2:1, 500)}, S-nZVI/BC_{sludge (2:1, 900)}, S-nZVI/BC_{reed (2:1, 700)}, and S-nZVI/BC _{walnut (2:1, 700)} respectively improved ${\text{NO}}_3^{-}$-N removal efficiencies by 22%, 20%, 3% and 0.1%, and the selectivity toward N₂ by 22%, 25%, 22% and 18%. S-nZVI uniformly loaded on BC provided electrons for the conversion of ${\text{NO}}_3^{-}$-N to N₂ through Fe⁰. At the same time, FeS_x layer was formed on the outer layer of ZVI in the sulfidation process to prevent iron oxidation, so as to improve the electrons utilization efficiency After adding four kinds of S-nZVI/BC into constructed wetlands (CWs), the ${\text{NO}}_3^{-}$-N removal efficiencies could reach 100% and the N₂O emission fluxes were reduced by 24.17%-36.63%. And the average removal efficiencies of TN, COD, TP were increased by 21.9%, -16.5%, 44.3%, repectively. The increasing relative abundances of denitrifying bacteria, such as Comamonas and Simplicispira, suggested that S-nZVI/BC could also improve the process of microbial denitrification. In addition, different S-nZVI/BC had different effects on denitrification functional genes (narG, nirk, nirS and nosZ genes), methanotrophs (pmoA) and methanogenesis (mcrA). This research provided an effective method to improve ${\text{NO}}_3^{-}$-N removal and reduce N₂O emission in CWs.     

Retrieval of refractive index of ultrafine single particle using hygroscopic growth factor obtained by high sensitive surface plasmon resonance microscopy

When exposed to different relative humidities (RHs), the optical properties of atmospheric aerosols will change because of changes in the aerosol particle size and complex refractive index (RI), which will affect haze formation and global climate change. The potential contributions of ultrafine particles to the atmospheric optical characteristics and to haze spreading cannot be ignored because of their high particle number concentrations and strong diffusibility; measurement of the optical properties of wet ultrafine particles is thus highly important for environmental assessment. Therefore, a surface plasmon resonance microscopy with azimuthal rotation illumination (SPRM-ARI) system is designed to determine the RIs of single particle aerosols with diameters of less than 100 nm in the hygroscopic growth process. Measurements are taken using mixed single particles with different mass ratios. The RIs of mixed single aerosols at different RHs are retrieved by measuring the scattering light intensity using the SPRM-ARI system and almost all the RIs of the bicomponent particles with different mass ratios decrease with increasing water content under high RH conditions. Finally, for each of the bicomponent particles, the maximum standard deviations for the retrieved RI values are only $2.06\times {10}^{-3}$, $3.08\times {10}^{-3}$ and $3.83\times {10}^{-3}$, corresponding to the NaCl and NaNO₃ bicomponent particles with a 3:1 mass ratio at 76.0% RH, the NaCl and glucose particles with a 1:3 mass ratio at 89.0% RH, and the NaCl and OA particles with a 1:1 mass ratio at 78.0% RH, respectively; these results indicate that the high-sensitivity SPRM-ARI system can measure the RI effectively and accurately.     

Toxic effects of acetochlor, methamidophos and their combination on nifH gene in soil

Toxic effects of two agrochemicals on nifH gene in agricultural black soil were investigated using denaturing gradient gel electrophoresis （DGGE） and sequencing approaches in a microcosm experiment. Changes of soil nifH gene diversity and composition were examined following the application of acetochlor, methamidophos and their combination. Acetochlor reduced the nifH gene diversity （both in gene richness and diversity index values） and caused changes in the nifH gene composition. The effects of acetochlor on nifH gene were strengthened as the concentration of acetochlor increased. Cluster analysis of DGGE banding patterns showed that nifH gene composition which had been affected by low concentration of acetochlor （50 mg/kg） recovered firstly. Methamidophos reduced nifH gene richness that except at 4 weeks. The medium concentration of methamidophos （150 mg/kg） caused the most apparent changes in nifH gene diversity at the first week while the high concentration of methamidophos （250 mg/kg） produced prominent effects on nifH gene diversity in the following weeks. Cluster analysis showed that minimal changes of nifH gene composition were found at 1 week and maximal changes at 4 weeks. Toxic effects of acetochlor and methamidophos combination on nifH gene were also apparent. Different nifH genes （bands） responded differently to the impact of agrochemicals： four individual bands were eliminated by the application of the agrochemicals, five bands became predominant by the stimulation of the agrochemicals, and four bands showed strong resistance to the influence of the agrochemicals. Fifteen prominent bands were partially sequenced, yielding 15 different nifH sequences, which were used for phylogenetic reconstructions. All sequences were affiliated with the alpha- and beta-proteobacteria, showing higher similarity to eight different diazotrophic genera.     

Arsenic uptake by arbuscular mycorrhizal maize （Zea mays L.） grown in an arsenic-contaminated soil with added phosphorus

The effects of arbuscular mycorrhizal (AM) fungus (Glomus mosseae) and phosphorus (P) addition (100 mg/kg soil) on arsenic (As) uptake by maize plants (Zea mays L.) from an As-contaminated soil were examined in a glasshouse experiment.Non-mycorrhizal and zero-P addition controls were included.Plant biomass and concentrations and uptake of As,P,and other nutrients,AM colonization,root lengths,and hyphal length densities were determined.The results indicated that addition of P significantly inhibited root colonization and development of extraradical mycelium.Root length and dry weight both increased markedly with mycorrhizal colonization under the zero-P treatments,but shoot and root biomass of AM plants was depressed by P application.AM fungal inoculation decreased shoot As concentrations when no P was added,and shoot and root As concentrations of AM plants increased 2.6 and 1.4 times with P addition,respectively.Shoot and root uptake of P,Mn,Cu,and Zn increased,but shoot Fe uptake decreased by 44.6%,with inoculation, when P was added.P addition reduced shoot P,Fe,Mn,Cu,and Zn uptake of AM plants,but increased root Fe and Mn uptake of the nonmycorrhizal ones.AM colonization therefore appeared to enhance plant tolerance to As in low P soil,and have some potential for the phytostabilization of As-contaminated soil,however,P application may introduce additional environmental risk by increasing soil As mobility.     

Potential of plant polyphenol oxidases in the decolorization and removal of textile and non-textile dyes

In this study an effort has been made to use plant polyphenol oxidases; potato （Solanum tuberosum） and brinjal （Solanum melongena）, for the treatment of various important dyes used in textile and other industries. The ammonium sulphate fractionated enzyme preparations were used to treat a number of dyes under various experimental conditions. Majority of the treated dyes were maximally decolorized at pH 3.0. Some of the dyes were quickly decolorized whereas others were marginally decolorized. The initial first hour was sufficient for the maximum decolorization of dyes. The rate of decolorization was quite slow on long treatment of dyes. Enhancement in the dye decolorization was noticed on increasing the concentration of enzymes. The complex mixtures of dyes were treated with both preparations of polyphenol oxidases in the buffers of varying pH values. Potato polyphenol oxidase was significantly more effective in decolorizing the dyes to higher extent as compared to the enzyme obtained from brinjal polyphenol oxidase. Decolorization of dyes and their mixtures, followed by the formation of an insoluble precipitate, which could be easily removed simply by centrifugation.     

Removal of heavy metals from sewage sludge by low costing chemical method and recycling in agriculture

ＲｅｍｏｖａｌｏｆｈｅａｖｙｍｅｔａｌｓｆｒｏｍｓｅｗａｇｅｓｌｕｄｇｅｂｙｌｏｗｃｏｓｔｉｎｇｃｈｅｍｉｃａｌｍｅｔｈｏｄａｎｄｒｅｃｙｃｌｉｎｇｉｎａｇｒｉｃｕｌｔｕｒｅＷｕＱｉｔａｎｇ，ＮｙｉｒａｎｄｅｇｅＰａｓｃａｓｉｅ，ＭｏＣｅｈｕｉＦ...     

Single and joint effects of pesticides and mercury on soil urease

The influence of two pesticides including chlorimuron-ethyl and furadan and mercury （Hg） on urease activity in 4 soils （meadow burozem and phaeozem） was investigated. The soils were exposed to various concentrations of the two pesticides and Hg individually and simultaneously. Results showed that there was a close relationship between urease activity and organic matter content in soil. Chlorimuron-ethyl and furadan could both activate urease in the 4 soils. The maximum increment of urease activity by chlorimuronethyl was up to 14%-18%. There was almost an equal increase （up to 13%-21%） in the urease activity by furadan. On the contrary, Hg markedly inhibited soil urease activity. A logarithmic equation was used to describe the relationship （P〈0.05） between the concentration of Hg and the activity of soil urease in the 4 tested soils. Semi-effect dose （ED50） values by the stress of Hg based on the inhibition of soil urease in the 4 soils were 88, 5.5, 24 and 20 mg/kg, respectively, according to the calculation of the corresponding equations. The interactive effect of chlorimuron-ethyl or furadan with metal Hg on soil urease was mainly synergic at the highest tested concentrations.     

Isolation and preliminary characterization of a 3-chlorobenzoate degrading bacteria

A study was conducted to compare the diversity of 2-, 3-, and 4-chlorobenzoate degraders in two pristine soils and one contaminated sewage sludge. These samples contained strikingly different populations of mono-chlorobenzoate degraders. Although fewer cultures were isolated in the uncontaminated soils than contaminated one, the ability of microbial populations to mineralize chlorobenzoate was widespread. The 3- and 4-chlorobenzoate degraders were more diverse than the 2-chlorobenzoate degraders. One of the strains isolated from the sewage sludge was obtained. Based on its phenotype, chemotaxonomic properties and 16S rRNA gene, the organism S-7 was classified as Rhodococcus erythropolis. The strain can grow at temperature from 4 to 37℃. It can utilize several （halo）aromatic compounds. Moreover, strain S-7 can grow and use 3-chlorobenzoate as sole carbon source in a temperatures range of 10-30℃ with stoichiometric release of chloride ions. The psychrotolerant ability was significant for bioremediation in low temperature regions. Catechol and chlorocatechol 1,2-dioxygenase activities were present in cell free extracts of the strain, but no （chloro）catechol 2,3- dioxygenase activities was detected. Spectral conversion assays with extracts from R. erythropolis S-7 showed accumulation of a compound with a similar UV spectrum as chloro-cis,cis-muconate from 3-chlorobenzoate. On the basis of these results, we proposed that S-7 degraded 3-chlorobenzoate through the modified ortho-cleave pathway.     

Organochlorine pesticides in soils under different land usage in the Taihu Lake region, China

A field study was conducted in the Taihu Lake region, China in 2004 to reveal the organochlorine pesticide concentrations in soils after the ban of these substances in the year 1983. Thirteen organochlorine pesticides (OCPs) were analyzed in soils from paddy field, tree land and fallow land. Total organochlorine pesticide residues were higher in agricultural soils than in uncultivated fallow land soils. Among all the pesticides, ΣDDX (DDD, DDE and DDT) had the highest concentration for all the soil samples, ranging from 3.10 ng/g to 166.55 ng/g with a mean value of 57.04 ng/g and followed by ΣHCH, ranging from 0.73 ng/g to 60.97 ng/g with a mean value of 24.06 ng/g. Dieldrin, endrin, HCB and α-endosulfan were also found in soils with less than 15 ng/g. Ratios of p,p'-(DDD DDE)/DDT in soils under three land usages were: paddy field ＞ tree land ＞ fallow land, indicating that land usage inlfuenced the degradation of DDT in soils. Ratios of p,p'-(DDD DDE)/DDT ＞1, showing aged residues of DDTs in soils of the Taihu Lake region. The results were discussed with data from a former study that showed very low actual concentrations of HCH and DDT in soils in the Taihu Lake region, but according to the chemical half-lives and their concentrations in soils in 1980s, the concentration of DDT in soils seemed to be underestimated. In any case our data show that the ban on the use of HCH and DDT resulted in a tremendous reduction of these pesticide residues in soils, but there are still high amounts of pesticide residues in soils, which need more remediation processes.     

Sorption of 1-naphthol by plant cuticular fractions

The contribution of aliphatic-rich plant biopolymer to sorption of hydrophobic organic compounds is significantly important because of their preservation and accumulation in the soil environment,but sorption mechanism is still not fully understood.In this study, sorption of 1-naphthol by plant cuticular fractions was examined to better understand the contributions of respective fraction.Toward this end,cuticular materials were isolated from the fruits of tomato by chemical method.The tomato cuticle sheet consisted of waxes (6.5 wt%),cuticular monomer (69.5 wt%),and polysaccharide (24.0 wt%).Isotherms of l-naphthol to the cuticular fractions were nonlinear (N value (0.82-0.90)) at the whole tested concentration ranges.The KodKow ratios for bulk cuticle (TC1),dewaxed cuticle (TC2),cutin (TC4),and desugared cuticle (TC5) were larger than unity,suggested that tomato bulk cuticle and cutin are much powerful solption medium.Sorption capability of cutin (TC4) was 2.4 times higher than the nonsaponifiable fraction (TC3).The 1-naphthol interactions with tomato cuticular materials were governed by both hydrophobic-type interactions and polar (H-bonding) interactions. Removal of the wax and polysaccharide materials from the bulk tomato cuticle caused a significant increase in the sorption ability of the cuticular material.There was a linear negative trend between K_(oc) values and the amount of polysaccharides or fraction's polarities ((N O)/C);while a linear positive relationship between K_(oc) values and the content of cutin monomer (linear R~2=0.993) was observed for present in the cuticular fractions.Predominant sorbent of the hydrophobic organic compounds (HOCs) in the plant cuticular fraction was the cutin monomer,contributing to 91.7% of the total sorption of tomato bulk cuticle.     

Alterations of organ histopathology and metallolhionein mRNA expression in silver barb, Puntius gonionotus during subchronic cadmium exposure

Common silver barb,Puntius gonionotus,exposed to the nominal concentration of 0.06 mg/L Cd for 60 d,were assessed for histopathological alterations(gills,liver and kidney),metal accumulation,and metallothionein(MT)mRNA expression.Fish exhibited pathological symptoms such as hypertrophy and hyperplasia of primary and secondary gill lamellae,vacuolization in hepatocytes,and prominent tubular and glomerular damage in the kidney.In addition,kidney accumulated the highest content of cadmium,more than gills and liver.Expression of MT mRNA was increased in both liver and kidney of treated fish.Hepatic MT levels remained high after fish were removed to Cd-free water.In contrast,MT expression in kidney was peaked after 28 d of treatment and drastically dropped when fish were removed to Cd-free water.The high concentrations of Cd in hepatic tissues indicated an accumulation site or permanent damage on this tissue.     

Seed selections for crystallization of calcium phosphate for phosphorus recovery

Seed induces and promotes the crystallization of calcium phosphate, and acts as carrier of the recovered phosphorus （P）. In order to select suitable seed for P recovery from wastewater, three seeds including Apatite （AP）, Juraperle （JP） and phosphate-modified Juraperle （M-JP） were tested and compared. Batch and fixed-bed column experiments of seeded crystallization of calcium phosphate were undertaken by using synthetic wastewater with 10 mg/L P phosphate. It shows that AP has bad enduring property in the crystallization process, while JP has better performance for multiple uses, and M-JP is a hopeful seed for P recovery by crystallization of calcium phosphate.