Plasmonic silver/silver oxide nanoparticles anchored bismuth vanadate as a novel visible-light ternary photocatalyst for degrading pharmaceutical micropollutants

The degradation of pharmaceutical micropollutants is an intensifying environmental problem and synthesis of efficient photocatalysts for this purpose is one of the foremost challenges worldwide.Therefore,this study was conducted to develop novel plasmonic Ag/Ag₂O/BiVO₄ nanocomposite photocatalysts by simple precipitation and thermal decomposition methods,which could exhibit higher photocatalytic activity for mineralized pharmaceutical micropollutants.Among the different tre...     

Fabricating Fe3O4-schwertmannite as a Z-scheme photocatalyst with excellent photocatalysis-Fenton reaction and recyclability

Here we reported an effective method to solve the rate-limiting steps, such as the reduction of Fe³⁺ to Fe²⁺ and an invalid decomposition of H₂O₂ in a conventional Fenton-like reaction. A magnetic heterogeneous photocatalyst, Fe₃O₄-schwertmannite(Fe₃O₄-sch) was successfully developed by adding Fe₃O₄ in the formation process of schwertmannite. Fe₃O₄-sch shows excelle...     

In situ preparation of g-C3N4/polyaniline hybrid composites with enhanced visible-light photocatalytic performance

The graphic carbon nitride/polyaniline (g-C₃N₄/PANI) hybrid composites were successfully synthesized by a facile in situ polymerization process under ice water bath. The photocatalytic activities of the g-C₃N₄/PANI composites were evaluated by using oxytetracycline (OTC) as model pollutants. The optimal g-C₃N₄/PANI composite (5%PANI: the g-C₃N₄/PANI hybrid with 5 wt.% of PANI) showed an enhancement degradation rate of 5-fold compared to that of conventional g-C₃N₄ under simulated-sunlight irradiation. In addition, the 5%PANI demonstrate significantly photocatalytic evolution H₂ rate (163.2 μmol/(g?hr)) under the visible light irradiation. Furthermore, based on the results of optical performance and electrochemical testing, a possible mechanism was proposed, indicating that the incorporation of PANI into the traditional g-C₃N₄ can effectively tune the electronic structures, improve the photo-generated electrons-holes separation and enhance extensive absorption of visible light. Such a g-C₃N₄/PANI hybrid nanocomposites could be envisaged to possess great potentials in practical wastewater treatment and water splitting.     

Characterization and physicochemical aspects of novel cellulose-based layered double hydroxide nanocomposite for removal of antimony and fluoride from aqueous solution

A series of novel adsorbents composed of cellulose (CL) with Ca/Al layered double hydroxide (CC_xA; where x represent the Ca/Al molar ratio) were prepared for the adsorption of antimony (Sb(V)) and fluoride (F^?) ions from aqueous solutions. The CC_xA was characterized by Fourier-transform infrared spectroscopy (FTIR), Brunauer–Emmett–Teller (BET), elemental analysis (CHNS/O), thermogravimetric analysis (TGA-DTA), zeta potential, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX) analysis. The effects of varying parameters such as dose, pH, contact time, temperature and initial concentration on the adsorption process were investigated. According to the obtained results, the adsorption processes were described by a pseudo-second-order kinetic model. Langmuir adsorption isotherm model provided the best fit for the experimental data and was used to describe isotherm constants. The maximum adsorption capacity was found to be 77.2 and 63.1 mg/g for Sb(V) and F^?, respectively by CC₃A (experimental conditions: pH 5.5, time 60 min, dose 15 mg/10 mL, temperature 298 K). The CC₃A nanocomposite was able to reduce the Sb(V) and F^? ions concentration in synthetic solution to lower than 6 μg/L and 1.5 mg/L, respectively, which are maximum contaminant levels of these elements in drinking water according to WHO guidelines.     

Review on heterogeneous oxidation and adsorption for arsenic removal from drinking water

The long term exposure of arsenic via drinking water has resulted in wide occurrence of arsenisim globally, and the oxidation of the non-ionic arsenite (As(III)) to negatively-charged arsenate (As(V)) is of crucial importance for the promising removal of arsenic. The chemical oxidants of ozone, chlorine, chlorine dioxide, and potassium permanganate may achieve this goal; however, their application in developing countries is sometimes restricted by the complicate operation and high cost. This review paper focuses on the heterogeneous oxidation of As(III) by solid oxidants such as manganese oxide, and the adsorption of As(V) accordingly. Manganese oxide may be prepared by both chemical and biological methods to achieve good oxidation performance towards As(III). Additionally, manganese oxide may be combined with other metal oxides, e.g., iron oxide, to improve the adsorption capability towards As(V). Furthermore, manganese oxide may be coated onto porous materials of metal organic frameworks to develop novel adsorbents for arsenic removal. To achieve the application in engineering works, the adsorbents granulation may be achieved by drying and calcination, agglomeration, and the active components may also be in situ coated onto the porous materials to maintain the oxidation and adsorption activities as much as possible. The novel adsorbents with heterogeneous oxidation and adsorption capability may be carefully designed for the removal of arsenic in household purifiers, community-level decentralized small systems, and the large-scale drinking water treatment plants (DWTPs). This review provides insight into the fundamental studies on novel adsorbents, the development of innovative technologies, and the demonstration engineering works involved in the heterogeneous oxidation and adsorption, and may be practically valuable for the arsenic pollution control globally.     

MoS2 quantum dots based MoS2/HKUST-1 composites for the highly efficient catalytic oxidation of elementary mercury

Due to the ever-tightening regulation on mercury emission in recent decades, there is an urgent need to develop novel materials for the removal of elemental mercury at coal-fired power plants. In this study, a series of MoS₂ quantum dots (QDs)-based MoS₂/HKUST-1 composite materials were prepared. It is found that MoS₂ QDs were encapsulated by HKUST-1 and enhanced the crystallinity and specific surface area of HKUST-1. The MoS₂/HKUST-1 showed excellent performance in catalytic oxidation of Hg⁰ as compared with pristine HKUST-1. It is found that surface layer of lattice oxygens is active and participates in Hg⁰ oxidation, while the consumption of surface oxygens then leads to the formation of oxygen vacancies on the surface. These vacancies are effective in the adsorption and dissociation of O₂, which subsequently participates in the oxidation of Hg⁰. Moreover, the study on the influence of commonly seen gas components, such as SO₂, NO, NH₃ and H₂O, etc., on Hg⁰ oxidation demonstrated that synergistic effects exist among these gas species. It is found that the presence of NO promotes the oxidation of Hg⁰ using oxygen as the oxidant.     

The role of doped-Mn on enhancing arsenic removal by MgAl-LDHs

To meet the challenges posed by global arsenic water contamination, the MgAlMn-LDHs with extraordinary efficiency of arsenate removal was developed. In order to clarify the enhancement effect of the doped-Mn on the arsenate removal performance of the LDHs, the cluster models of the MgAlMn-LDHs and MgAl-LDHs were established and calculated by using density functional theory (DFT). The results shown that the doped-Mn can significantly change the electronic structure of the LDHs and improve its chemical activity. Compared with the MgAl-LDHs that without the doped-Mn, the HOMO-LUMO gap was smaller after doping. In addition, the -OH and Al on the laminates were also activated to improve the adsorption property of the LDHs. Besides, the doped-Mn existed as a novel active site. On the other hand, the MgAlMn-LDHs with the doped-Mn, the increased of the binding energy, as well as the decreased of the ion exchange energy of interlayer Cl⁻, making the ability to arsenate removal had been considerably elevated than the MgAl-LDHs. Furthermore, there is an obvious coordination covalent bond between arsenate and the laminates of the MgAlMn-LDHs that with the doped-Mn.     

Significant influences of TiO2 crystal structures on NO2 and HONO emissions from the nitrates photolysis

The emissions of NO₂ and HONO from the KNO₃ photolysis in the presence of TiO₂ were measured using a round-shape reactor coupled to a NO_x analyzer. TiO₂ played important roles in the emission flux density of NO₂ (R_NO2) and HONO (R_HONO), depending on crystal structures and mass ratios of TiO₂. R_NO2 and R_HONO significantly decreased with increasing the rutile and anatase mass ratios from 0 to 8 and 0.5 wt.%, respectively. Nevertheless, with further increasing the anatase mass ratio to 8 wt.%, there was an increase in R_NO2 and R_HONO. R_NO2 on KNO₃/TiO₂/SiO₂ had positive correlation with the KNO₃ mass (1–20 wt.%), irradiation intensity (80–400 W/m²) and temperature (278–308 K), while it had the maximum value at the relative humidity (RH) of 55%. R_HONO on KNO₃/TiO₂/SiO₂ slightly varied with the KNO₃ mass and temperature, whereas it increased with the irradiation intensity and RH. In addition, the mechanism for NO₂ and HONO emissions from the nitrates photolysis and atmospheric implications were discussed.     

Magnetic polyamidoamine dendrimers for magnetic separation and sensitive determination of organochlorine pesticides from water samples by high-performance liquid chromatography

Organochlorine pesticides (OCPs) have received much attention due to their toxicity. Reliable methods to monitor their residues in the environment are needed. Here, magnetic polyamidoamine dendrimers were prepared by co-precipitation, Michael addition, and amidation. The magnetic polyamidoamine dendrimers demonstrated good adsorption ability for OCPs—this feature was utilized to construct a sensitive tool for monitoring OCPs in water samples. The proposed method provided remarkable linearity from 0.1 to 500 μg/L and satisfactory limits of detection from 0.012 to 0.029 μg/L. The spiked recoveries of the four target analytes were 91.8%?103.5% with relative standard deviations less than 4.5%. The magnetic materials had good reusability. The results indicated that the resulting method was an efficient, easy, rapid, economical, and eco-friendly tool for monitoring OCPs in aqueous samples.     

CuO-modified activated carbon for the improvement of toluene removal in air

We used an impregnation method to prepare CuO/AC(activated carbon) composite materials of different CuO content and characterized them via scanning electron microscope(SEM), Brunauer–Emmett–Teller(BET), and Fourier transform infrared spectroscopy(FT-IR).The effect of CuO content on toluene adsorption/desorption was evaluated.We explored the reusability of AC and AC03(CuO modified AC with CuO loading 0.3 wt.%) adsorbents via toluene adsorption/desorption cycle testing.We used quasi-firstand quasi-second-order models, the Bangham model, and the Weber–Morris model to fit the toluene adsorption data.The introduction of CuO species evidently improved the adsorption performance of activated carbon toward toluene.The CuO content markedly affected the specific surface area, CuO dispersal, the numbers of oxygen-containing functional groups on the surface, and adsorption performance of the prepared composite adsorbents.Low CuO content was not favorable for the formation of active adsorption sites,while high content greatly reduced the specific surface area, and even covered active adsorption sites.The toluene adsorption performance varied in the order AC03 AC02 AC05 AC08 AC01(AC03, AC02, AC05, AC08 and AC01 are CuO modifying AC with CuO loading 0.3, 0.2, 0.5 0.8 and 0.1 wt.%, respectively).The breakthrough time and toluene adsorption capacity of the AC03 composite adsorbent were 94 min and 701.8 mg/g,respectively, and the recycling efficiency was 92.8% after thermal desorption at 200°C.The adsorption process was best described by the Bangham model and adsorption could be divided into three stages.