废聚乙烯的综合利用

废聚乙烯的回收利用是近年来环境污染控制的一个重要课题.作为废旧塑料的主要组成成份的废聚乙烯,人们已对其回收利用展开了大量的研究,并取得了很大的进步.从三大方面讨论了废聚乙烯的综合利用问题,同时,讨论了很多最新技术,并对每一方法的优缺点作出分析,对其应用前景作出了预测.     

废植物热解制气制油制炭的研究

主要考察了不同废植物的热解产气产油（液）产炭效果及不同过程条件的热解产气产油产炭效果。可用作热解制气制油制炭的废植物包括一切草木本植物,含有大量的木质素和纤维素,属于可再生能源。废植物热解制气制油制炭,可以使大量的被遗弃废植物得到充分利用,变废为宝,同时,可以帮助解决未来可能出现的能源危机,为废弃物的资源化、为未来的能源发展提供了新的方向。另外,由于废植物的广泛可取,废植物热解制气特别适用于在中小城市和农村推广应用,改善人们的生活条件和居住环境,进一步缩小城乡差距,为国家的经济发展做出贡献。     

废PE塑料熔剂法制氧化聚乙烯蜡

研究了在不同溶剂中以聚乙烯废塑料制高附加值氧化聚乙烯蜡产品的方法,测定了所得产物的分子量、酸值、软化点,并用IR考察了含氧基团.结果表明,溶剂A体系中能制备出颜色、分子量、酸值合格的低分子量氧化聚乙烯蜡,产品软化点在101～110℃,相对分子质量为1 500～3 000,酸值是12.以废塑料包装为原料,氧气做氧化剂下制得的氧化聚乙烯蜡的酸值最高.     

废PE塑料溶剂法制氧化聚乙烯蜡

研究了在不同溶剂中以聚乙烯废塑料制高附加值氧化聚乙烯蜡产品的方法,测定了所得产物的分子量、酸值、软化点,并用IR考察了含氧基团。结果表明,溶剂A体系中能制备出颜色、分子量、酸值合格的低分子量氧化聚乙烯蜡,产品软化点在101～110℃,相对分子质量为1500,3000,酸值是12。以废塑料包装为原料,氧气做氧化剂下制得的氧化聚乙烯蜡的酸值最高。     

聚乙烯副产物聚乙烯蜡的热解及轻质馏分的GC-MS分析

采用高温模拟蒸馏、红外光谱和热重分析等方法对聚乙烯副产物聚乙烯蜡进行了表征。在间歇高压反应釜中对聚乙烯副产物聚乙烯蜡进行了热解,并通过正交实验考察了热解温度、停留时间和初始压力对液相产物收率的影响。利用GC-MS技术对液相产物轻质馏分(低于200℃)进行了分析。结果表明:聚乙烯副产物聚乙烯蜡主要由长链脂肪烃(C_(14)~C_(70))组成;热解发生的温度范围为175~490℃;热解温度和停留时间是影响液相产物收率的主要因素;液相产物轻质馏分的碳数分布在C_9~C_(20),主要为α-烯烃(占比32.79%)和正构烷烃,其中单体烃含量最高的是1-癸烯(占比8.46%),它是制备高级合成润滑油聚α-烯烃的优质原料。     

废聚苯乙烯的化学回收方法

废聚乙烯（ＰＳ）转化为燃料油和化学品的化学回收方法,分为废ＰＳ单独裂解及废ＰＳ与其它废塑料混合裂解两种方式,分别阐述了两种回收方式的研究成果和工艺现状,并就存在的问题进行了讨论。     

废聚乙烯塑料膜再生利用直接制膜工艺研究

介绍了废聚乙烯塑料膜及制品的循环再生利用技术。原料100%采用废聚乙烯塑料膜;不需造粒、熔粒,直接一次熔融制成新塑料膜;再生的农用地膜和包装膜经权威部门检验测试,各项质量技术指标均达到或超过国家标准,少部分指标超国标5倍以上。由于减少了工序,节约了能源,降低了成本,彻底突破了传统工艺在废聚乙烯塑料膜再生利用过程中,只能添加10%废料的约束;解决了必须经过造粒、二次熔融才能成膜的技术难题。其生产工艺独特、新颖,无"三废"产生。为节约资源、节约能源、循环经济、综合利用、减少污染、保护环境,创出了一条全新的技术途径。     

废聚苯乙烯泡沫塑料的催化裂解

为了对废聚苯乙烯泡沫塑料（WPS）资源化利用,通过对WPS进行催化裂解的方法,研究了催化剂种类和裂解温度对裂解时间、裂解油产率、苯乙烯回收率以及裂解油纯度的影响。研究结果表明,催化剂种类和裂解温度对裂解反应有着重要影响。裂解温度升高,裂解油产率提高,裂解时间缩短,但苯乙烯选择性下降;低于380 ℃时,氧化钙的裂解油产率和裂解时间优于氧化铝和氯化铝,但苯乙烯的选择性劣于氧化铝和氯化铝;高于400 ℃时,氯化铝、氧化铝和氧化钙的催化活性接近。在实验条件下,WPS催化裂解的最佳催化剂为氯化铝,380 ℃下的裂解时间为25 min,裂解油产率为85.48%,裂解油中苯乙烯含量为80.66%（w）,且副产物较少。     

废镀锡电线电缆的再生新技术

研究了可一步实现废镀锡电线电缆资源化的新方法。废镀锡电线电缆在真空条件下热解液化的同时,利用离心分离的方法将熔化的锡分离出来。实验后得到铜线、含锡碳渣、热解油、热解气。热解油可作为化工原料或进一步加工成燃料,少量不可凝的热解气体经碱液吸收后收集,以便循环利用。     

我国废塑料油化技术的应用现状与前景

介绍了我国废塑料油化技术的现状,对废塑料的热解法、热解－催化改质法、催化热解法3种基本方法进行了经济技术评价,对建立废塑料油化工厂的原料收集体系及运输距离、建厂规模、生产过程中存在的二次污染问题进行了分析,探讨了控制污染的方案,对制定相关的政策和法律提出了建议,探讨了具有我国特色的废塑料油化技术发展及应用之路。     

我国农药工业三废治理方法

详细介绍了我国农药生产中排放的废水、废气、废渣的常用治理技术,通过改进生产工艺和回收利用减少三废的实例,以及主要品系农药生产废水治理方法选择的思路。     

废聚丙烯塑料的回收利用技术

介绍了废聚丙烯塑料能源化的方法(焚烧、无氧及有氧条件下的热分解)与资源化回收利用技术(简单再利用、改性再生利用),并对国内外相关方面的研究和应用情况进行了报道。     

Utilization of Waste Sorghum Grain for Producing Superabsorbent for Personal Care Products

Modification of useful starch extracted from waste sorghum grains was carried out for production of superabsorbent materials which can be used in personal care products. Starch was extracted using alkali steeping method. It was characterized for swelling power, percentage transmittance and iodine binding values. The extracted starch was modified via graft copolymerization of acrylic acid and acrylamide onto starch to produce biodegradable absorbent material. The changes in modified starch structure were assessed using TGA, FTIR and SEM. The evaluation of enhancement in the properties was done by performing absorption tests. The reaction parameters were optimized to achieve higher graft add-on level and water absorption capacity. The absorbent product was further subjected to saponification for further enhancing its water absorption capacity (368.8 g/g). The product prepared by using optimized parameters of reaction was made highly porous by introducing sodium bicarbonate during the reaction. It showed a significant increase in the rate of water absorption and enhancement in water absorption capacity (380.9 g/g).The modified product showed 101.1 and 77.0 g/g absorption of artificial blood and artificial urine, respectively. This modified product was infused in commercially available sanitary napkin and baby diaper. Further, it was tested for fluid absorption and centrifuge retention capacity and it performed distinctly better than the commercial products. This superabsorbent material showed 12% weight loss after 28 days when biodegradability test by soil burial method was carried out.     

大型磷铵工程磷石膏制硫酸联产水泥装置的三废治理及利用

介绍了大型磷铵工程磷石膏制硫酸联产水泥装置排出的废水，废气和废渣的利用及治理情况，并对生产过程的磷、硫和氟的转化及损失量进行了衡算。     

Estimating Time Windows for Burning Oil at Sea: Processes and Factors

This paper discusses processes and factors for estimating time period windows of in situ burning of spilled oil at sea. Time-periods of in situ burning of Alaska North Slope (ANS) crude oil are estimated using available data. Three crucial steps are identified. The First Step is to determine the time it takes for the evaporative loss to reach the known or established limitation for evaporation and compare this time-period with estimated time of ignition at the ambient wind and sea temperatures. The Second Step is to determine the water up-take of the spilled oil and compare it with the known or established limitation for water-in-oil content. The Third Step is to determine the necessary heat load from the igniter to bring the surface temperature of the spilled oil to its flash point temperature so that it will burn at the estimated time period for ignition of the slick.     

Production of Polyhydroxyalkanoates from Fatty Wastes

The production of polyesters from triglyceride containing substrates was investigated. A first filter step based on lipase activity was followed and those bacteria potentially able to degrade oils or animal fats were further tested for their polymer accumulation properties, selected and kept for further studies. In a second step, bacteria were directly grown on animal fats and/or vegetable oils, and polyhydroxyalkanoates (PHAs) accumulation was verified under appropriate incubation conditions. Each substrate, whether of animal or vegetable derivation, supported the growth of a number of the newly isolated strains and among those, some strains were also found to produce reasonably high amounts of PHA. The repeat-unit composition of the polyesters was determined by gas chromatography (GC) analysis of the ?-hydroxyalkanoate methyl esters from the hydrolyzed polymer and some class of co-polymers were also detected. These properties, coupled with the ability of some of the selected isolates to grow and produce lipases on a minimal medium, could be considered as promising in view of possible industrial applications. The overall results indicate that PHAs could be produced from waste containing considerable amounts of fat, oil and grease (FOG), that generally need to be treated for their disposal.     

氯酸盐生产中三废的综合利用

阐述了从氯酸盐生产电解尾气中回收氢、从含铬废水中回收重铬酸钠和用盐泥制内墙涂料等综合利用技术。     

回收PTA废料生产增塑剂

介绍了扬子石化公司ＰＴＡ生产过程中所排各种废料的分离提纯及回收利用，对难以回收的氧化残渣的分离回收和利用作了重点论述。提供了用所回收的ＴＡ和混合苯二甲本乡生产剂的工艺流程和工艺参数。     

石油产品装卸过程中的油气回收技术

介绍了石油产品装卸过程产生的油气污染及其治理方法、工艺过程与技术特点。结合中国石化股份有限公司长岭分公司石油产品装卸过程产生的油气污染情况,对油气回收方案的选择、回收工艺及油品回收情况与经济效益进行了论述。