Out with the garbage: the parasitic strategy of the mantisfly Plega hagenella mass-infesting colonies of the eusocial bee Melipona subnitida in northeastern Brazil

Between April and June of 2012 mantisflies (Plega hagenella) were found to be extensively parasitizing the nests of two groups of managed colonzies of eusocial stingless bees (Melipona subnitida) in the semi-arid region of northeastern Brazil. The mantisfly larvae developed inside closed brood cells of the bee comb, where each mantispid larva fed on the bee larva or pupa present in a single brood cell. Mature mantispid larvae pupated inside silken cocoons spun in place within their hosts' brood cells then emerged as pharate adults inside the bee colony. Pharate adults were never attacked and killed by host colony workers. Instead, colony workers picked up the pharates and removed them from the nest unharmed, treating them similar to the way that the general refuse is removed from the nest. Adult mantispids subsequently eclosed from their pupal exuviae outside the nest. Manipulative experiments showed that post-eclosion adult mantispids placed back within active bee colonies were quickly attacked and killed. These observations demonstrate that pharate and post-eclosion adults of P. hagenella are perceived differently by colony workers and that delayed adult eclosion is an important functional element in the parasitic life strategy of P. hagenella, allowing adults to escape without injury from the bee colonies they parasitize.     

Larval salivary glands are a source of primer and releaser pheromone in honey bee (Apis mellifera L.)

A brood pheromone identified in honeybee larvae has primer and releaser pheromone effects on adult bees. Using gas chromatography–mass spectrometry (GC–MS) to evaluate fatty acid esters—the pheromonal compounds—in different parts of the larvae, we have localized the source of the esters as the larval salivary glands. A histochemical study describes the glands and confirms the presence of lipids in the glands. Epithelial cells of the gland likely secrete the fatty acids into the lumen of the gland. These results demonstrate the salivary glands to be a reservoir of esters, components of brood pheromone, in honeybee larvae.     

Do honeybees, Apis mellifera scutellata, regulate humidity in their nest?

Honeybees are highly efficient at regulating the biophysical parameters of their hive according to colony needs. Thermoregulation has been the most extensively studied aspect of nest homeostasis. In contrast, little is known about how humidity is regulated in beehives, if at all. Although high humidity is necessary for brood development, regulation of this parameter by honeybee workers has not yet been demonstrated. In the past, humidity was measured too crudely for a regulation mechanism to be identified. We reassess this issue, using miniaturised data loggers that allow humidity measurements in natural situations and at several places in the nest. We present evidence that workers influence humidity in the hive. However, there are constraints on potential regulation mechanisms because humidity optima may vary in different locations of the nest. Humidity could also depend on variable external factors, such as water availability, which further impair the regulation. Moreover, there are trade-offs with the regulation of temperature and respiratory gas exchanges that can disrupt the establishment of optimal humidity levels. As a result, we argue that workers can only adjust humidity within sub-optimal limits.     

Caps and gaps: a computer model for studies on brood incubation strategies in honeybees (<Emphasis Type="Italic">Apis mellifera carnica</Emphasis>)

In addition to heat production on the comb surface, honeybee workers frequently visit open cells (“gaps”) that are scattered throughout the sealed brood area, and enter them to incubate adjacent brood cells. We examined the efficiency of this heating strategy under different environmental conditions and for gap proportions from 0 to 50%. For gap proportions from 4 to 10%, which are common to healthy colonies, we find a significant reduction in the incubation time per brood cell to maintain the correct temperature. The savings make up 18 to 37% of the time, which would be required for this task in completely sealed brood areas without any gaps. For unnatural high proportions of gaps (>20%), which may be the result of inbreeding or indicate a poor condition of the colony, brood nest thermoregulation becomes less efficient, and the incubation time per brood cell has to increase to maintain breeding temperature. Although the presence of gaps is not essential to maintain an optimal brood nest temperature, a small number of gaps make heating more economical by reducing the time and energy that must be spent on this vital task. As the benefit depends on the availability, spatial distribution and usage of gaps by the bees, further studies need to show the extent to which these results apply to real colonies. M. Fehler and M. Kleinhenz contributed equally to this work.     

A critical number of workers in a honeybee colony triggers investment in reproduction

Social insect colonies, like individual organisms, must decide as they develop how to allocate optimally their resources among survival, growth, and reproduction. Only when colonies reach a certain state do they switch from investing purely in survival and growth to investing also in reproduction. But how do worker bees within a colony detect that their colony has reached the state where it is adaptive to begin investing in reproduction? Previous work has shown that larger honeybee colonies invest more in reproduction (i.e., the production of drones and queens), however, the term ‘larger’ encompasses multiple colony parameters including number of adult workers, size of the nest, amount of brood, and size of the honey stores. These colony parameters were independently increased in this study to test which one(s) would increase a colony’s investment in reproduction via males. This was assayed by measuring the construction of drone comb, the special type of comb in which drones are reared. Only an increase in the number of workers stimulated construction of drone comb. Colonies with over 4,000 workers began building drone comb, independent of the other colony parameters. These results show that attaining a critical number of workers is the key parameter for honeybee colonies to start to shift resources towards reproduction. These findings are relevant to other social systems in which a group’s members must adjust their behavior as a function of the group’s size.     

Social waves in giant honeybees (Apis dorsata) elicit nest vibrations

Giant honeybees (Apis dorsata) nest in the open and have developed a wide array of strategies for colony defence, including the Mexican wave-like shimmering behaviour. In this collective response, the colony members perform upward flipping of their abdomens in coordinated cascades across the nest surface. The time–space properties of these emergent waves are response patterns which have become of adaptive significance for repelling enemies in the visual domain. We report for the first time that the mechanical impulse patterns provoked by these social waves and measured by laser Doppler vibrometry generate vibrations at the central comb of the nest at the basic (=‘natural’) frequency of 2.156?±?0.042 Hz which is more than double the average repetition rate of the driving shimmering waves. Analysis of the Fourier spectra of the comb vibrations under quiescence and arousal conditions provoked by mass flight activity and shimmering waves gives rise to the proposal of two possible models for the compound physical system of the bee nest: According to the elastic oscillatory plate model, the comb vibrations deliver supra-threshold cues preferentially to those colony members positioned close to the comb. The mechanical pendulum model predicts that the comb vibrations are sensed by the members of the bee curtain in general, enabling mechanoreceptive signalling across the nest, also through the comb itself. The findings show that weak and stochastic forces, such as general quiescence or diffuse mass flight activity, cause a harmonic frequency spectrum of the comb, driving the comb as an elastic plate. However, shimmering waves provide sufficiently strong forces to move the nest as a mechanical pendulum. This vibratory behaviour may support the colony-intrinsic information hypothesis herein that the mechanical vibrations of the comb provoked by shimmering do have the potential to facilitate immediate communication of the momentary defensive state of the honeybee nest to the majority of its members.     

Vasculature of the hive: heat dissipation in the honey bee (Apis mellifera) hive

Eusocial insects are distinguished by their elaborate cooperative behavior and are sometimes defined as superorganisms. As a nest-bound superorganism, individuals work together to maintain favorable nest conditions. Residing in temperate environments, honey bees (Apis mellifera) work especially hard to maintain brood comb temperature between 32 and 36 °C. Heat shielding is a social homeostatic mechanism employed to combat local heat stress. Workers press the ventral side of their bodies against heated surfaces, absorb heat, and thus protect developing brood. While the absorption of heat has been characterized, the dissipation of absorbed heat has not. Our study characterized both how effectively worker bees absorb heat during heat shielding, and where worker bees dissipate absorbed heat. Hives were experimentally heated for 15 min during which internal temperatures and heat shielder counts were taken. Once the heat source was removed, hives were photographed with a thermal imaging camera for 15 min. Thermal images allowed for spatial tracking of heat flow as cooling occurred. Data indicate that honey bee workers collectively minimize heat gain during heating and accelerate heat loss during cooling. Thermal images show that heated areas temporarily increase in size in all directions and then rapidly decrease to safe levels (<37 °C). As such, heat shielding is reminiscent of bioheat removal via the cardiovascular system of mammals.     

Hexagonal comb cells of honeybees are not produced via a liquid equilibrium process

The nests of European honeybees (Apis mellifera) are organised into wax combs that contain many cells with a hexagonal structure. Many previous studies on comb-building behaviour have been made in order to understand how bees produce this geometrical structure; however, it still remains a mystery. Direct construction of hexagons by bees was suggested previously, while a recent hypothesis postulated the self-organised construction of hexagonal comb cell arrays; however, infrared and thermographic video observations of comb building in the present study failed to support the self-organisation hypothesis because bees were shown to be engaged in direct construction. Bees used their antennae, mandibles and legs in a regular sequence to manipulate the wax, while some bees supported their work by actively warming the wax. During the construction of hexagonal cells, the wax temperature was between 33.6 and 37.6 °C. This is well below 40 °C, i.e. the temperature at which wax is assumed to exist in the liquid equilibrium that is essential for self-organised building.     

Fever in honeybee colonies

 Honeybees, Apis spp., maintain elevated temperatures inside their nests to accelerate brood development and to facilitate defense against predators. We present an additional defensive function of elevating nest temperature: honeybees generate a brood-comb fever in response to colonial infection by the heat-sensitive pathogen Ascosphaera apis. This response occurs before larvae are killed, suggesting that either honeybee workers detect the infection before symptoms are visible, or that larvae communicate the ingestion of the pathogen. This response is a striking example of convergent evolution between this "superorganism" and other fever-producing animals. Received: 2 September 1999 / Accepted in revised form: 28 February 2000     

Water uptake of multicomponent organic mixtures and their influence on hygroscopicity of inorganic salts

The hygroscopic behaviors of atmospherically relevant multicomponent water soluble organic compounds(WSOCs) and their effects on ammonium sulfate(AS) and sodium chloride were investigated using a hygroscopicity tandem differential mobility analyzer(HTDMA) in the relative humidity(RH) range of 5%–90%. The measured hygroscopic growth was compared with predictions from the Extended-Aerosol Inorganics Model(E-AIM) and Zdanovskii–Stokes–Robinson(ZSR) method. The equal mass multicomponent WSOCs mixture containing levoglucosan, succinic acid, phthalic acid and humic acid showed gradual water uptake without obvious phase change over the whole RH range. It was found that the organic content played an important role in the water uptake of mixed particles.When organic content was dominant in the mixture(75%), the measured hygroscopic growth was higher than predictions from the E-AIM or ZSR relation, especially under high RH conditions. For mass fractions of organics not larger than 50%, the hygroscopic growth of mixtures was in good agreement with model predictions. The influence of interactions between inorganic and organic components on the hygroscopicity of mixed particles was related to the salt type and organic content. These results could contribute to understanding of the hygroscopic behaviors of multicomponent aerosol particles.     

长江三角洲冬季一次低能见度过程的地区差异和气象条件

采用NCEP再分析资料、MICAPS地面、高空气象资料以及国家环保部空气质量监测资料,对2014年2月20~22日长江三角洲地区一次低能见度过程地区差异和气象条件进行了分析.天气形势分析表明,长三角地面处在高压的控制下,地面风速较小,使污染物积累,有利于低能见度(雾-霾)的形成和维持.根据不同区域的雾、霾分布和日变化特征,将长江三角洲地区分为3个子区域:I区为江苏大部(雾霾混合型),II区为上海及其周边(霾类型),III区为浙江大部(雾类型),该区域白天能见度较高,夜间能见度较低的特征是由湿度因子造成的.影响I区能见度变化的主要原因是:热力原因:大气对流层低层的层结稳定;湿度原因为:空气较湿润,气溶胶粒子吸湿性增长;动力原因主要是垂直方向和水平方向的大气扩散能力弱;污染因子对能见度变化的影响较小.影响II区能见度变化的主要原因是PM2.5浓度高导致的污染,热力因子、湿度因子和动力因子对能见度的变化影响很小.影响III区能见度变化的热力原因是:大气对流层低层层结稳定、近地面存在逆温;湿度原因是因为:空气较湿润,气溶胶粒子吸湿性增长;动力原因是因为边界层高度较低导致的垂直扩散能力较差.各个区域的气象因子解释方差的计算结果表明:I区湿度因子和动力因子对能见度的影响更大,III区.湿度因子对能见度的影响更大.     

Influence of water contained in porous limestone on corrosion

The chemical degradation of porous limestone due to its reaction with sulphur dioxide was investigated by determining amounts and distributions of sulphur-containing corrosion products in samples collected from historic buildings. Water vapour adsorption equilibria have been determined for limestones of varying petrology, and correlated with sulphur dioxide uptakes measured in artificial weathering experiments. Out of several possible routes of the corrosive reaction, dissolution of sulphur dioxide in bulk water present in the stone may be related to the prevailing mechanism leading to stone deterioration. The bulk water may appear in the limestone as water condensed in the capillaries, or absorbed by hygroscopic salts.     

Lower disease infections in honeybee (Apis mellifera) colonies headed by polyandrous vs monandrous queens

We studied the relationship between genetic diversity and disease susceptibility in honeybee colonies living under natural conditions. To do so, we created colonies in which each queen was artificially inseminated with sperm from either one or ten drones. Of the 20 colonies studied, 80% showed at least one brood disease. We found strong differences between the two types of colonies in the infection intensity of chalkbrood and in the total intensity of all brood diseases (chalkbrood, sacbrood, American foulbrood, and European foulbrood) with both variables lower for the colonies with higher genetic diversity. Our findings demonstrate that disease can be an important factor in the ecology of honeybee colonies and they provide strong support for the disease hypothesis for the evolution of polyandry by social insect queens.     

Heat Shielding: A Novel Method of Colonial Thermoregulation in Honey Bees

 Honey bees, Apis mellifera, maintain constant colony temperatures throughout the year. Honey bees fan their wings to cool the colony, and often spread fluid in conjunction with this behavior to induce evaporative cooling. We present an additional, previously undescribed mechanism used by the honey bee to maintain constant colony temperature in response to localized temperature increases. Worker bees shield the comb from external heat sources by positioning themselves on hot interior regions of the hive's walls. Although honey comb and brood comb were both shielded, the temperature-sensitive brood received a greater number of heat shielders and was thus better protected from overheating. Heat shielding appears to be a context-dependent adaptive behavior performed by worker bees who would previously have been considered "unemployed." Received: 16 November 1998 / Accepted in revised form: 31 March 1999     

Hygroscopicity of ambient submicron particles in urban Hangzhou, China

In this study, hygroscopicity of size-segregated ambient submicron particles in urban Hangzhou was studied from 28th December 2009 to 18th January 2010, using a hygroscopicity-tandem differential mobility analyzer (H-TDMA). The submicron particles in Hangzhou showed a minor hygroscopic growth at 73% relative humidity (RH), and then grew significantly between 77% and 82% RH. Monomodal distribution accounted for 90% for 30 nm particles, 17% for 50 nm particles, and less than 7% for particles larger than 50 nm at 82% RH. Deconvolution of the bimodal distribution indicated a less hygroscopic group and a more hygroscopic group, with the fraction of the more hygroscopic group increasing with the initial dry particle size and then remaining almost constant for accumulation mode particles. Our results imply that submicron particles in urban Hangzhou were almost entirely externally mixed, and the hygroscopic properties of ambient particles in urban Hangzhou were mainly a function of their size and chemical composition.     

Effects of cross-feeding anarchistic and wild type honey bees: anarchistic workers are not queen-like

Unlike normal (wild type) honey bee ( Apis mellifera) colonies, 'anarchistic' colonies are characterised by workers that activate their ovaries in the presence of the queen and brood and by the ability of their workers to lay eggs that evade worker policing. In the Cape honey bee ( A. m. capensis), female larvae can manipulate non- capensis nurse workers such that they receive more larval food and develop into worker-queen intermediates or intercastes. We speculated that, in anarchistic colonies, larvae might produce signals that result in excessive feeding of female larvae. Excessively fed female larvae may then develop into reproductively active workers. In this study we cross-fostered anarchistic and wild type brood and investigated the effect of cross-fostering on the amount of food fed to larvae and on the morphology of the resulting workers. We show that anarchistic larvae do not manipulate wild type nurse workers into feeding them more, nor do anarchistic workers develop into worker-queen intermediates. On the contrary, anarchistic larvae are fed less than wild type larvae and anarchistic workers seem to be poor nurses in that they feed larvae less, irrespective of brood genotype.     

Transgenic insect-resistant corn affects the fourth trophic level: effects of<Emphasis Type="Italic"> Bacillus thuringiensis</Emphasis>-corn on the facultative hyperparasitoid<Emphasis Type="Italic"> Tetrastichus howardi</Emphasis>

As hyperparasitoids may have a considerable influence on the control of herbivorous arthropods, analyzing the host-mediated impact of Bacillus thuringiensis-plants (Bt-plants) on hyperparasitoids is of interest. Laboratory-scale experiments were conducted in order to assess the potential effect of Bt-corn leaf material on the facultative hyperparasitoid Tetrastichus howardi (Olliff) (Hymenoptera: Eulophidae), mediated through the herbivore Chilo partellus Swinhoe (Lepidoptera: Crambidae) and its primary parasitoid Cotesia flavipes (Cameron) (Hymenoptera: Braconidae). In the Bt-group, significantly less C. flavipes larvae per host spun cocoons and pupated than in the control, and the mean fresh weight of a single C. flavipes cocoon was significantly reduced compared to the control. All C. flavipes cocoons of one host formed cocoon clusters. T. howardi females of the Bt-group parasitized significantly less cocoon clusters than in the control. Moreover, significantly fewer C. flavipes cocoons per cocoon cluster were successfully parasitized as compared to the control. As a consequence, T. howardi females of the control had more offspring than in the Bt-group. Adult female T. howardi offspring of the Bt-group weighed significantly less than in the control, but there was no significant weight difference between males of both groups. Our results suggest that transgenic insect-resistant plants could affect hyperparasitoids indirectly. However, it remains to be determined whether facultative hyperparasitoids prefer to develop as primary or secondary parasitoids under field conditions.     

In situ DRIFTS study of hygroscopic behavior of mineral aerosol

In situ difflusion reflectance infrared Fourier transform spectroscopy was used to study the water adsorption on mineral oxides(SiO2,α-Al2O3,MgO,Fe2O3,TiO2).The results showed that all the water adsorption isotherms were well fitted with the Brunauer-EmmettTeller(BET)-Ⅲ type equation,with the calculated monolayers occurring at 24%-30% relative humidity.It showed that about 1-5 layers of water adsorbed on oxides surfaces in ambient relative humidity(20%-90%).The measured deliquescence relative humidity of NaCl was(74 ± 1)%,which demonstrated that DRIFTS is a useful method for the study the hygroscopic behavior of mineral dust.In addition,the limits of DRIFTS were also discussed.     

Integument and defence in larva and prepupa of a sawfly living on a semi-aquatic plant

The larvae of the sawfly Rhadinoceraea micans live and feed on a semi-aquatic plant, Iris pseudacorus, and their integument is strongly hydrophobic. The hydrophobicity is part of a chemical defence strategy, easy bleeding, also known from congeners. The prepupae burrow into the soil where they form a cocoon in which they pupate, thus implying different micro-environmental conditions. The cuticle structure and wetting defensive effectiveness of R. micans were compared between larvae and prepupae. The two stages were similarly well defended against attacking ants by the bleeding of a deterrent hemolymph, whereas they were dissimilar in the cuticle surface that presented sculptures and wax crystals at the larval stage only. The integument of prepupae was less structured, and hydrophilic. Larvae of R. micans exhibit, among sawflies, an exceptional cuticle structuring and we assume that they occupy this particular niche of a semi-aquatic environment to avoid encounters with ground-dwelling predators whereas prepupae may benefit from the chemical defence acquired at larval stage.     

基于观测的大气气溶胶散射吸湿增长因子模型研究 ——以2006 CAREBeijing加强观测为例

在2006年北京加强观测期间,以颗粒物－液体转换采集系统(PILS)测量的气溶胶各可溶性离子组分的质量浓度、颗粒物分级采样器(MOUDI)测量的各可溶性离子组分及有机碳(OC)、碳黑(EC)的分级质量谱分布为基础,对离子组分的可能存在形态进行判断,计算了化学组分质量浓度及各化学物种的粒径数谱浓度;利用Mie模型及各化学物种的密度、折射率、吸湿粒径增长因子等参数计算得到外混、内混的粒子群在干燥状态、不同相对湿度下的散射系数,最终计算得到不同化学组分外混、内混状态下的散射吸湿增长因子;将模型模拟的气溶胶散射吸湿增长因子与观测得到的该因子进行对比,发现模拟值与观测值能够在一定误差范围内吻合,实现了该因子的闭合实验.