Effects of soiling and cleaning on the reflectance and solar heat gain of a light-colored roofing membrane

A roof with high solar reflectance and high thermal emittance (e.g., a white roof) stays cool in the sun, reducing cooling power demand in a conditioned building and increasing summertime comfort in an unconditioned building. The high initial solar reflectance of a white membrane roof (circa 0.8) can be lowered by deposition of soot, dust, and/or biomass (e.g., fungi or algae) to about 0.6; degraded solar reflectances range from 0.3 to 0.8, depending on exposure. We investigate the effects of soiling and cleaning on the solar spectral reflectances and solar absorptances of 15 initially white or light-gray polyvinyl chloride membrane samples taken from roofs across the United States. Black carbon and organic carbon were the two identifiable strongly absorbing contaminants on the membranes. Wiping was effective at removing black carbon, and less so at removing organic carbon. Rinsing and/or washing removed nearly all of the remaining soil layer, with the exception of (a) thin layers of organic carbon and (b) isolated dark spots of biomass. Bleach was required to clear these last two features. At the most soiled location on each membrane, the ratio of solar reflectance to unsoiled solar reflectance (a measure of cleanliness) ranged from 0.41 to 0.89 for the soiled samples; 0.53 to 0.95 for the wiped samples; 0.74 to 0.98 for the rinsed samples; 0.79 to 1.00 for the washed samples; and 0.94 to 1.02 for the bleached samples. However, the influences of membrane soiling and cleaning on roof heat gain are better gauged by fractional variations in solar absorptance. Solar absorptance ratios (indicating solar heat gain relative to that of an unsoiled membrane) ranged from 1.4 to 3.5 for the soiled samples; 1.1 to 3.1 for the wiped samples; 1.0 to 2.0 for the rinsed samples; 1.0 to 1.9 for the washed samples; and 0.9 to 1.3 for the bleached samples.     

太阳能固定膜光催化去除双酚A的特性与效果

以太阳能固定膜光催化中试装置,研究了光解、初始浓度和平均光强等对双酚A(BPA)光催化去除的影响及BPA的矿化和在自来水中的处理效果.试验结果表明,BPA在日光照射下很难光解,其光催化降解呈表观一级反应,在平均光强介于5.7～23.5 W/m2时,表观反应速率常数和平均光强呈线性关系.太阳能光催化对BPA具有良好的矿化作用,但其降解与以UV254为光源的降解有不同的机理.太阳能光催化对自来水中BPA也具有较好的处理效果.     

Kinetic degradation of the pollutant guaiacol by dark Fenton and solar photo-Fenton processes

This work is first intended to optimize the experimental conditions for the maximum degradation of guaiacol (2-methoxyphenol) by Fenton’s reagent, and second, to improve the process efficiency through the use of solar radiation. Guaiacol is considered as a model compound of pulp and paper mill effluent. The experiments were carried out in a laboratory-scale reactor subjected or not to solar radiation. Hydrogen peroxide solution was continuously introduced into the reactor at a constant flow rate. The kinetics of organic matter decay was evaluated by means of the chemical oxygen demand (COD) and the absorbance measurements. The experimental results showed that the Fenton and solar photo-Fenton systems lead successfully to 90% elimination of COD and absorbance at 604 nm from a guaiacol solution under particular experimental conditions. The COD removal always obeyed a pseudo-first-order kinetics. The effect of pH, temperature, H₂O₂ dosing rate, initial concentration of Fe²⁺, and initial COD was investigated using the Fenton process. The solar photo-Fenton system needed less time and consequently less quantity of H₂O₂. Under the optimum experimental conditions, the solar photo-Fenton process needs a dose of H₂O₂ 40% lower than that used in the Fenton process to remove 90% of COD.     

Sensitivity analysis of the CERES-wheat model for variations in CO2 and meteorological factors in Northwest Turkey

Plant growth is very sensitive to variations in atmospheric factors. Possible effects of climate change on plant growth can be estimated and evaluated using the crop growth simulation models. In this study, the CERES (Crop Environment Resource Synthesis)-wheat model was applied to two consequent growing seasons (1997–1998 and 1998–1999) in order to determine the model sensitivity on the changes in several meteorological factors such as air temperature, precipitation, solar radiation and carbon dioxide (CO₂) concentration. In the model, the air temperature variations were applied from ±1°C up to ±2°C and CO₂ were changed in the range of 20% to 100%, while the solar radiation, precipitation were varied between 10% and 20%. Biomass and the grain yield of the wheat crop were influenced positively by the increased combination of the solar radiation, air temperature and CO₂. However, low crop responses to the variations in precipitation were unexpected.     

TiO2光催化降解低浓度溴氰菊酯

用高压汞灯为光源,以二氧化钛光催化降解有机溴杀虫剂－溴氰菊酯,研究了ＴｉＯ２用量、ＰＨ值、等对降解的影响及采用太阳光做光源处理溴氰菊酯的可行性。说明以高压汞灯及太阳光作光源,ＴｉＯ２催化降解敌杀死是有效的。     

Performance improvement and advancement studies of mixed-mode solar thermal dryers: a review

Solar thermal dryers are solar-operated gadgets utilized to dehumidify various products, especially food items and rubber sheets. This article provides detailed design, parametric studies, and an in-depth review of mixed-mode solar dryers (MMSD) with a case study of fish drying near coastal lines. Due to several advantages compared to open sun drying and prominent performance index compared to indirect and direct type solar dryers, mixed-mode solar dryers have large adaptability on the field. Moreover, mixed-mode solar thermal dryers with different augmentations are reviewed, for instance, mixed-mode solar dryers with evacuated tube collectors, phase change materials, ultraviolet rays stabilized housing, and dehumidifiers. The case study of fish drying near the coastal line of Gujarat, India has been carried out to study the present scenario of the drying activities. Hence, the objective of this review is to identify the capable mixed-mode solar dryer with heat recovery systems. Substantial reviews within the article suggest an essential need to implement the hybrid mixed-mode solar dryer cum distiller technology for small-scale enterprises that can simultaneously provide potable water near coastal lines along with drying of fishes from the solar dryer. Furthermore, future research demands such hybrid mixed-mode solar drying systems that strongly fulfill the requirements of local communities near coastal lines involved in fish drying activities.

     

Solar photocatalytic decolorization of methylene blue in water

In this study, a photocatalytic decolorization system equipped with immobilized TiO2 and illuminated by solar light was used to remove the color of wastewater. To examine the decoloring efficiency of this system, photocatalytic decolorization of an organic dye such as methylene blue was studied as an example. The effects of light source, pH, as well as the initial concentration of dye were also investigated. It was observed that the solution of methylene blue could be almost completely decolorized by the solar light/TiO2 film process while there was about 50% color remaining with solar irradiation only. In addition, it was found that the decoloring efficiency of solution was higher with solar light irradiation than with artificial UV light irradiation, even though the artificial UV light source supplied higher UV intensity at 254 nm. The color removal rate of methylene blue with solar light irradiation was almost twice that of artificial UV light irradiation. This phenomena was mainly attributed to that some visible light range of solar light was useful for exciting the methylene blue molecules adsorbed on TiO2 film, leading to a photosensitization process undergoing and decoloring efficiency promoted. This solar-assisted photocatalytic device showed potential application for decoloring organic dyes in wastewater.     

Humic-like substances extracted from composts can promote the photodegradation of Irgarol 1051 in solar light

Humic-like substances (HLS) were extracted from a mixture of sewage sludges and trimmings (70-30%, w/w) after different times of composting (0, 70 days and 130 days). HLS were analyzed by elemental analysis, UV-visible and fluorescence spectroscopy and also tested for their ability to photosensitize the degradation of Irgarol. The rate of Irgarol photodegradation in artificial solar light was found to be 2.5- to 4.3-fold higher in the presence of HLS than in buffered Milli-Q water. These results were confirmed by experiments in solar light that evidenced the photodegrading properties of HLS in a more striking way. Using 2-propanol as hydroxyl radical scavenger, we could show that hydroxyl radicals contributed to the photosensitized Irgarol degradation for about 25%. The photodegrading activity of HLS, their absorbance and their emissive properties were all found to increase between 0 and 70 days of composting and to remain quite constant between 70 and 130 days. The degree of humification varied in the same way, linking all these properties to the humification process.     

Design, engineering, and construction of photosynthetic microbial cell factories for renewable solar fuel production

There is an urgent need to develop sustainable solutions to convert solar energy into energy carriers used in the society. In addition to solar cells generating electricity, there are several options to generate solar fuels. This paper outlines and discusses the design and engineering of photosynthetic microbial systems for the generation of renewable solar fuels, with a focus on cyanobacteria. Cyanobacteria are prokaryotic microorganisms with the same type of photosynthesis as higher plants. Native and engineered cyanobacteria have been used by us and others as model systems to examine, demonstrate, and develop photobiological H(2) production. More recently, the production of carbon-containing solar fuels like ethanol, butanol, and isoprene have been demonstrated. We are using a synthetic biology approach to develop efficient photosynthetic microbial cell factories for direct generation of biofuels from solar energy. Present progress and advances in the design, engineering, and construction of such cyanobacterial cells for the generation of a portfolio of solar fuels, e.g., hydrogen, alcohols, and isoprene, are presented and discussed. Possibilities and challenges when introducing and using synthetic biology are highlighted.     

Solar light induced and TiO2 assisted degradation of textile dye reactive blue 4

Aqueous solutions of reactive blue 4 textile dye are totally mineralised when irradiated with TiO2 photocatalyst. A solution containing 4 x 10(-4) M dye was completely degraded in 24 h irradiation time. The intensity of the solar light was measured using Lux meter. The results showed that the dye molecules were completely degraded to CO2, SO4(2-), NO3-, NH4+ and H2O under solar irradiation. The addition of hydrogen peroxide and potassium persulphate influenced the photodegradation efficiency. The rapidity of photodegradation of dye intermediates were observed in the presence of hydrogen peroxide than in its absence. The auxiliary chemicals such as sodium carbonate and sodium chloride substantially affected the photodegradation efficiency. High performance liquid chromatography and chemical oxygen demand were used to study the mineralisation and degradation of the dye respectively. It is concluded that solar light induced degradation of textile dye in wastewater is a viable technique for wastewater treatment.     

太阳光Fenton法处理垃圾渗滤液中有机污染物

研究利用太阳光Fenton法处理垃圾渗滤液。根据太阳光辐射强度随时间的变化规律,选择重庆7、8月份的晴天,在中午12：00到下午14：00时进行试验,研究太阳光辐射时间、pH值、Fenton试剂用量对垃圾渗滤液COD去除率的影响。研究结果表明：太阳光Fenton法对垃圾渗滤液的COD有较好的去除效果,COD去除率达86.2%。太阳光Fenton法处理垃圾渗滤液的优化条件是：日光辐射时间为120 min,pH值为2.5,Fe²⁺浓度为5 mmol/L,H₂O₂浓度为570 mmol/L。同时,论文还对太阳光Fenton法处理垃圾渗滤液的动力学进行分析。研究结果显示：太阳光Fenton法处理垃圾渗滤液,其表观动力学方程为-dC/dt=2.6×10^-8×P^1.92×F^1.79×E^1.67。     

Design,Engineering, and Construction of Photosynthetic Microbial Cell Factories for Renewable Solar Fuel Production

There is an urgent need to develop sustainable solutions to convert solar energy into energy carriers used in the society. In addition to solar cells generating electricity, there are several options to generate solar fuels. This paper outlines and discusses the design and engineering of photosynthetic microbial systems for the generation of renewable solar fuels, with a focus on cyanobacteria. Cyanobacteria are prokaryotic microorganisms with the same type of photosynthesis as higher plants. Native and engineered cyanobacteria have been used by us and others as model systems to examine, demonstrate, and develop photobiological H₂ production. More recently, the production of carbon-containing solar fuels like ethanol, butanol, and isoprene have been demonstrated. We are using a synthetic biology approach to develop efficient photosynthetic microbial cell factories for direct generation of biofuels from solar energy. Present progress and advances in the design, engineering, and construction of such cyanobacterial cells for the generation of a portfolio of solar fuels, e.g., hydrogen, alcohols, and isoprene, are presented and discussed. Possibilities and challenges when introducing and using synthetic biology are highlighted.     

Fresnel lens to concentrate solar energy for the photocatalytic decoloration and mineralization of orange II in aqueous solution

The decoloration and mineralization of the azo dye orange II under conditions of artificial ultraviolet light and solar energy concentrated by a Fresnel lens in the presence of hydrogen peroxide and TiO(2)-P25 was studied. A comparative study to demonstrate the viability of this solar installation was done to establish if the concentration reached in the focus of the Fresnel lens was enough to improve the photocatalytic degradation reaction. The degradation efficiency was higher when the photolysis was carried out under concentrated solar energy irradiation as compared to UV light source in the presence of an electron acceptor such us H(2)O(2) and the catalyst TiO(2). The effect of hydrogen peroxide, pH and catalyst concentration was also determined. The increase of H(2)O(2) concentration until a critical value (14.7 mM) increased both the solar and artificial UV oxidation reaction rate by generating hydroxyl radicals and inhibiting the (e(-)/h(+)) pair recombination, but the excess of hydrogen peroxide decreases the oxidation rate acting as a radical or hole scavenger and reacting with TiO(2) to form peroxo-compounds, contributing to the inhibition of the reaction. The use of the response surface methodology allowed to fit the optimal values of the parameters pH and catalyst concentration leading to the total solar degradation of orange II. The optimal pH range was 4.5-5.5 close to the zero point charge of TiO(2) depending on surface charge of catalyst and dye ionization state. Dosage of catalyst higher than 1.1 gl(-1) decreases the degradation efficiency due to a decrease of light penetration.     

Removal of fluorine from contaminated soil by electrokinetic treatment driven by solar energy

Instead of direct current power supply, a series of electrokinetic remediation experiments driven by solar energy on fluorine-contaminated soil were conducted in a self-made electrolyzer, in order to reduce energy expenditure of electrokinetic remediation. After the 12-day electrokinetic remediation driven by solar energy, the removal efficiency of fluorine was 22.3 %, and electrokinetic treatment had an impact on changes in partitioning of fluorine in soil. It proved that the combination of electrokinetics and solar energy was feasible and effective to some extent for the remediation of fluorine-contaminated soil. Meanwhile, the experimental results also indicated that the electromigration was a more dominant transport mechanism for the removal of fluorine from contaminated soil than electroosmosis, and the weather condition was the important factor in affecting the removal efficiency.     

Ozone uptake to the polar snowpack at Summit,Greenland

The uptake of atmospheric ozone to the polar, year-round snowpack on glacial ice was studied at Summit, Greenland during three experiments in 2003, 2004, and 2005. Ozone was measured at up to three depths in the snowpack, on the surface, and above the surface at three heights on a tower along with supporting meteorological parameters. Ozone in interstitial air decreased with depth, albeit ozone gradients showed a high variation depending on environmental conditions of solar radiation and wind speed. Under low irradiance levels, up to 90% of ozone was preserved up to 1 m depth in the snowpack. Ozone depletion rates increased significantly with the seasonal and diurnal cycle of solar irradiance, resulting in only 10% of ozone remaining in the snowpack following solar noon during summertime. Faster snowpack air exchange from wind pumping resulted in smaller above-surface-to-within snowpack ozone gradients. These data indicate that the uptake of ozone to polar snowpack is strongly dependent on solar irradiance and wind pumping. Ozone deposition fluxes to the polar snowpack are consequently expected to follow incoming solar radiation levels and to exhibit diurnal and seasonal cycles. The Summit observations are in stark contrast to recent findings in the seasonal, midlatitude snowpack [Bocquet, F., Helmig, D., Oltmans, S.J., 2007. Ozone in the mid-latitude snowpack at Niwot Ridge, Colorado. Arctic, Antarctic and Alpine Research, in press], where mostly light-independent ozone behavior was observed. These contrasting results imply different ozone chemistry and snowpack–atmosphere gas exchange in the snow-covered polar, glacial conditions compared to the temperate, mid-latitude environment.     

Effects of ultraviolet radiation on toad early life stages

Background  Exposure to harmful levels of ultraviolet-B radiation (UVB), a component of solar radiation, has been suggested as a potential cause of amphibian declines. Methods  We measured solar radiation (UVB, ultraviolet-A, and visible) wavebands in breeding ponds of Bufo boreas (boreal toad, a montane species that has undergone severe population declines) and Bufo woodhousii (Woodhouse’s toad, a plains toad that has not experienced declines) and examined tolerances of these species to simulated solar UVB exposures in the laboratory. Results  We found larvae of both species to be tolerant of simulated solar UVB in excess of solar UVB levels observed in their breeding ponds. B. boreas tadpoles were more tolerant of simulated solar UVB exposure than B. woodhousii tadpoles, possibly because of greater amounts of photoprotective melanin in B. boreas skin. Conclusions  UVB levels observed in B. boreas habitats do not currently appear to constitute a threat to the survival of these animals; however, long-term (>1 month) exposure to UVB levels comparable to levels associated with the water interface appears to reduce survival in B. woodhousii tadpoles. Therefore, future increases in surface and water column UVB radiation in bufonid habitats might pose significant survival risks to B. boreas or B. woodhousii populations.     

The effects of solar UV-B radiation on embryonic mortality and development in three boreal anurans (Rana temporaria, Rana arvalis and Bufo bufo).

Many species of amphibians have experienced population and range reductions. It has been hypothesized that sensitivity to UV-B may contribute to the population declines of some amphibian species. We performed field experiments to measure the effects of solar UV-B on the hatching success of three Finnish anuran species, the common frog (Rana temporaria), moor frog (Rana arvalis) and common toad (Bufo bufo). Further, the effects of natural UV-B radiation on survival of the tadpoles of the same three species of anurans were tested. A significant percentage of R. temporaria and B. bufo embryos survived when exposed to and protected from solar UV-B and hatching success was not affected by solar radiation. Elimination of solar UV-B significantly increased the hatching success of R. arvalis, but embryonic mortality was high in both treatments. The data indicates that under natural conditions, solar UV-B radiation influences embryo survival in R. arvalis, but has no effect on R. temporaria and B. bufo. Solar UV-B radiation had no effect on R. temporaria and R. arvalis tadpoles, but elimination of UV-B significantly increased survival of B. bufo tadpoles. It seems that ambient UV-radiation levels have no effect on R. temporaria but may affect R. arvalis and B. bufo at different developmental stages.     

The role of ferrous ion in Fenton and photo-Fenton processes for the degradation of phenol

The efficiency of different Fenton-related oxidative processes such as Fenton, solar-Fenton and UV-Fenton were examined using phenol as a model compound in simulated and industrial wastewater. A batch study was conducted to optimize parameters like pH, hydrogen peroxide concentration and ferrous ion concentration governing the Fenton process. At optimum conditions, different Fenton-related processes were compared for the degradation of phenol. Increased degradation and mineralisation efficiency were observed in photo-Fenton processes as compared to conventional Fenton process. The maximum mineralising efficiency for phenol with Fenton, solar and UV-Fenton processes were 41%, 96% and 97% respectively. In Fenton process, carboxylic acids like acetic acid and oxalic acid were formed as end products during the degradation of phenol while in photo-Fenton processes, both these ions were identified during the early stages of phenol degradation and were oxidized almost completely at 120 min of the reaction time. In photo-Fenton processes (solar and UV light) complete degradation were observed with 0.4 mM of Fe2+ catalyst as compared to 0.8 mM of Fe2+ in conventional Fenton process. In Fenton and solar-Fenton processes, an iron reusability study was performed to minimize the amount of iron used in treatment process. The efficacy of Fenton and solar-Fenton processes was applied to effluent from phenol resin-manufacturing unit for the removal and mineralisation of phenol.     

Pollution and the Planetary Albedo

Addition of cloud nuclei by pollution can lead to an increase in the solar radiation reflected by clouds. The reflection of solar energy by clouds already may have been increased by the addition of man-made cloud nuclei. The albedo of a cloud is proportional to optical thickness for thin clouds, but changes more slowly with increasing thickness. The optical thickness is increased when the number of cloud nuclei is increased. Although the changes are small, the long-term effect on climate can be profound.     

Photochemical alteration of the molecular weight of dissolved organic matter

Molecular weight (MW) is a key control on the physical, chemical, and biological characteristics of dissolved organic mater (DOM). This study investigated the effect of photooxidation on the average MW of DOM by exposing DOM of diverse origins to simulated solar radiation at varying levels of dissolved oxygen and under different incident light wavelength regimes. During irradiation, high-molecular-weight fractions were destroyed and low-molecular-weight constituents were formed. The average MW decreased with irradiation time in all treatments in a manner that can be described by a quasi-exponential function, which suggests that solar radiation is incapable of completely mineralizing DOM even after prolonged exposure. Increasing the oxygen concentration accelerated the MW reduction while the removal of oxygen strongly suppressed this process. The fractional contributions from UV-B, UV-A, and visible radiations to full-spectrum photoinduced MW reduction varied considerably among the DOM samples examined, ranging from 19% to 60%, 17% to 36%, and 15% to 46%, respectively. The MW changes in time-series irradiations were inversely correlated with the ratio of the absorbance at 250 nm to that at 365 nm (i.e., the E₂/E₃ quotient). Photoinduced MW reduction was accompanied by a decrease of polydispersity, which is indicative of a reduced DOM heterogeneity.