Dry atmospheric inputs of trace metals at the Mediterranean coast of Israel (SE Mediterranean): sources and fluxes

This study presents the first detailed data on aerosol concentrations of trace metals (Cd, Pb, Cu, Zn, Cr, Mn, Fe and Al) at the SE Mediterranean coast of Israel, and assesses their sources and fluxes. Aerosol samples were collected at two sampling stations (Tel-Shikmona and Maagan Michael) along the coast between 1994 and 1997. Two broad categories of aerosol trace metal sources were defined; anthropogenic (Cd, Cu, Pb and Zn) and naturally derived elements (Al, Fe, Mn and Cr). The extent of the anthropogenic contribution was estimated by the degree of enrichment of these elements compared to the average crustal composition (EF_crust). High values (median >100) were calculated for Cd, Pb and Zn, minor values for Cu and relatively low values (<10) for Fe, Mn and Cr. The crustal-derived elements exhibited a statistically significant seasonal pattern of higher concentrations during spring and autumn (e.g. Al concentrations in some cases during these periods were observed to be in excess of 1500 ng m⁻³). In the eastern Mediterranean basin crustal-dominated elements are enriched by 2–3 times while others (Cd and Pb) are comparable to the northwestern Mediterranean. The Pb : Cd ratios of ∼150 are higher than in coastal European sites (60–116) or emission materials (∼50). It is speculated that these differences are attributed mainly to the mixing of crustal material with local and European emissions. At present, it is impossible to quantify the latter two fractions. Back trajectory analysis and the subsequent categorization of two main aerosol populations, ‘European’ and ‘North Africa–Arabian’, exhibited a significantly different geochemical imprint on the aerosol chemical composition. ‘European’-derived air masses indicated significantly higher EF_crust values for Cd and Pb due to the greater anthropogenic character of the aerosol population, with a dilution by crustal material of this population leading to comparatively lower EF_crust values associated with the North African–Arabian air masses.     

Elemental composition and reflectance of ambient fine particles at 21 European locations

We sampled fine particles (PM_2.5) over a 1-year period at 21 central urban monitoring sites in 20 cities of the European Community Respiratory Health Survey (ECRHS). Particle filters were then analysed for elemental composition using energy dispersive X-ray fluorescence spectrometry and reflectance (light absorption). Elemental analyses yielded valid results for 15 elements (Al, As, Br, Ca, Cl, Cu, Fe, K, Mn, Pb, S, Si, Ti, V, Zn).Annual and seasonal means of PM_2.5, reflectance, and elements show a wide range across Europe with the lowest levels found in Iceland and up to 80 times higher concentrations in Northern Italy. This pattern holds for most of the air pollution indicators. The mass concentration of S did constitute the largest fraction of the analysed elements of PM_2.5 in all locations. The crustal component varies from less than 10% up to 25% across these cities. Temporal correlations of daily values vary considerably from city to city, depending on the indicators compared. Nevertheless, correlations between estimates of long-term exposure, such as annual means, are generally high among indicators of PM_2.5 from anthropogenic sources, such as S, metals, and reflectance. This highlights the difficulty to disentangle effects of specific sources or PM constituents in future health effect analyses using annual averages.     

Measurements of SOx,NOx and aerosol species on Bermuda

During August 1982 and January and February 1983, General Motors Research Laboratories operated an air monitoring site on the southwest coast of Bermuda. The data show that the levels of the NO_x and SO_x species reaching Bermuda are determined by the direction of the air flow. The highest levels of sulfate (mean = 4.0 μg m⁻³), nitric acid (126 ppt) and other species are observed when air masses arrive from the northeastern United States while the lowest levels (sulfate = 1.1 μg m⁻³; nitric acid = 41 ppt) occur during air flow from the SE direction. With westerly air flow, increases in many anthropogenic constituents such as particulate sulfate, lead, elemental carbon, sulfur dioxide, nitrogen dioxide, nitric acid and ozone are observed. These species are generally the lowest during SE winds which bring high concentrations of soil- and crustal-related aerosol species. The source of this crustal material appears to be the Sahara Desert. On the average, the levels of anthropogenic constituents are higher in winter because of frequent intrusions of N American air masses. Conversely, the levels of crustal materials are higher in summer when the SE flow is more prevalent.     

Spatial and seasonal variations of elemental composition in Mt. Everest (Qomolangma) snow/firn

In May 2005, a total of 14 surface snow (0–10 cm) samples were collected along the climbing route from the advanced base camp to the summit (6500–8844 m a.s.l.) on the northern slope of Mt. Everest (Qomolangma). A 108 m firn/ice core was retrieved from the col of the East Rongbuk Glacier (28.03°N, 86.96°E, 6518 m a.s.l.) on the north eastern saddle of Mt. Everest in September 2002. Surface snow and the upper 3.5 m firn samples from the core were analyzed for major and trace elements by inductively coupled plasma mass spectroscopy (ICP-MS). Measurements show that crustal elements dominated both surface snow and the firn core, suggesting that Everest snow chemistry is mainly influenced by crustal aerosols from local rock or prevalent spring dust storms over southern/central Asia.There are no clear trends for element variations with elevation due to local crustal aerosol inputs or redistribution of surface snow by strong winds during the spring. Seasonal variability in snow/firn elements show that high elemental concentrations occur during the non-monsoon season and low values during the monsoon season. Ca, Cr, Cs, and Sr display the most distinct seasonal variations. Elemental concentrations (especially for heavy metals) at Mt. Everest are comparable with polar sites, generally lower than in suburban areas, and far lower than in large cities. This indicates that anthropogenic activities and heavy metal pollution have little effect on the Mt. Everest atmospheric environment. Everest firn core REE concentrations are the first reported in the region and seem to be comparable with those measured in modern and Last Glacial Maximum snow/ice samples from Greenland and Antarctica, and with precipitation samples from Japan and the East China Sea. This suggests that REE concentrations measured at Everest are representative of the background atmospheric environment.     

Characterization of PM2.5 aerosols dominated by local pollution and Asian dust observed at an urban site in Korea during aerosol characterization experiments (ACE)--Asia Project

Daily fine particulate matter (PM2.5) samples were collected at Gwangju, Korea, during the Aerosol Characterization Experiments (ACE)-Asia Project to determine the chemical properties of PM2.5 originating from local pollution and Asian dust (AD) storms. During the study period, two significant events occurred on April 10-13 and 24-25, 2001, and a minor event occurred on April 19, 2001. Based on air mass transport pathways identified by back-trajectory calculation, the PM2.5 dataset was classified into three types of aerosol populations: local pollution and two AD aerosol types. The two AD types were transported along different pathways. One originated from Gobi desert area in Mongolia, passing through Hunshandake desert in Northern Inner Mongolia, urban and polluted regions of China (AD1), and the other originated in sandy deserts located in the Northeast Inner Mongolia Plateau and then flowed southward through the Korean peninsula (AD2). During the AD2 event, a smoke plume that originated in North Korea was transported to our study site. Mass balance closures show that crustal materials were the most significant species during both AD events, contributing -48% to the PM2.5 mass; sulfate aerosols (19.1%) and organic matter (OM; 24.6%) were the second greatest contributors during the AD1 and AD2 periods, respectively, indicating that aerosol properties were dependent on the transport pathway. The sulfate concentration constituted only 6.4% (4.5 microg/m3) of the AD2 PM2.5 mass. OM was the major chemical species in the local pollution-dominated PM2.5 aerosols, accounting for 28.7% of the measured PM2.5 mass, followed by sulfate (21.4%), nitrate (15%), ammonium (12.8%), elemental carbon (8.9%), and crustal material (6.5%). Together with substantial enhancement of the crustal elements (Mg, Al, K, Ca, Sc, Ti, Mn, Fe, Sr, Zr, Ba, and Ce), higher concentrations of pollution elements (S, V, Ni, Zn, As, Cd, and Pb) were observed during AD1 and AD2 than during the local pollution period, indicating that, in addition to crustal material, the AD dust storms also had a significant influence on anthropogenic elements.     

Ambient concentrations and dry deposition fluxes of trace elements in Izmir,Turkey

Dry deposition samples were collected using a smooth surrogate surface at the Kaynaklar Campus of the Dokuz Eylul University in Izmir, Turkey. Concurrently ambient aerosol samples were collected. All samples were analyzed for anthropogenic and crustal trace elements. The average trace element concentrations and fluxes measured in this study were generally higher than those reported previously for urban and rural areas. The contribution of local terrestrial and anthropogenic sources were also investigated using enrichment factors (EFs) calculated relative to the local soil. Relatively lower EFs for ambient samples and high ambient concentrations indicated that the local soil was polluted and contributed significantly to ambient trace element concentrations. Deposition samples had higher EFs than the air samples. The EF sequences of trace elements were also different for deposition and ambient samples, probably due to the fact they have different mass median diameters and deposition velocities. The overall dry deposition velocities for trace elements calculated by dividing the particulate fluxes measured with the surrogate surfaces by ambient concentrations ranged from 0.6 (Al) to 6.2 cm s⁻¹ (Fe). The agreement between the experimental dry deposition velocities determined in this study and the previously reported ones using similar techniques for trace elements was good.     

The use of chemical and statistical methods to identify sources of selected elements in ambient air aerosols in Karachi,Pakistan

Concentrations of 23 elements plus NO₃⁻, SO₄²⁻ and Cl⁻ were determined for samples collected continuously every 3 or 6 h during 22–27 July, 1985 at a suburban site in Karachi, Pakistan. Concentrations of lithophilic elements and several anthropogenic elements were ~ 80 % higher during daytime than at night. These elevated levels were attributed to daytime increases in wind velocity and anthropogenic activity. Factor analysis showed that ~ 50% of the variance was associated with soil, and ~ 14 % each with oceanic Na and Cl⁻, anthropogenic Sb and Pb, and Zn, Se and SO₄²⁻. A cement (limestone/dolomite) factor was not separated even though Ca and Mg concentrations were unusually high and a cement factory was located nearby. This led to an investigation of a chemical approach to determine the sources. Concentrations of Na, Mg and Ca were determined in water-extracts of the samples. Assuming soluble Na (~ 92 % of total) to be sea derived, marine components of Mg, SO₄²⁻, Ca and Br were determined. Solubility considerations were then used to reveal the cement source and apportion the aerosol sources. On the average, approximately 48 % of the total aerosol mass could be accounted for by the ‘cement’ and ‘soil’ components; about 12 % by the ‘sea salt’, about 3% by the ‘fossil fuel’ SO₄²⁻ (as (NH₄)₂SO₄); about 1 % by the NO₃⁻ (as NH₄NO₃); the remaining 36 % of the aerosol mass was unassigned.     

Physicochemical variations in atmospheric aerosols recorded at sea onboard the Atlantic–Mediterranean 2008 Scholar Ship cruise (Part II): Natural versus anthropogenic influences revealed by PM10 trace element geochemistry

The geochemistry of PM₁₀ filter samples collected at sea during the Scholar Ship Atlantic–Mediterranean 2008 research cruise reveals a constantly changing compositional mix of pollutants into the marine atmosphere. Source apportionment modelling using Positive Matrix Factorization identifies North African desert dust, sea spray, secondary inorganic aerosols, metalliferous carbon, and V–Ni-bearing combustion particles as the main PM₁₀ factors/sources. The least contaminated samples show an upper continental crust composition (UCC)-normalised geochemistry influenced by seawater chemistry, with marked depletions in Rb, Th and the lighter lanthanoid elements, whereas the arrival of desert dust intrusions imposes a more upper crustal signature enriched in “geological” elements such as Si, Al, Ti, Rb, Li and Sc. Superimposed on these natural background aerosol loadings are anthropogenic metal aerosols (e.g. Cu, Zn, Pb, V, and Mn) which allow identification of pollution sources such as fossil fuel combustion, biomass burning, metalliferous industries, and urban–industrial ports. A particularly sensitive tracer is La/Ce, which rises in response to contamination from coastal FCC oil refineries. The Scholar Ship database allows us to recognise seaborne pollution sourced from NW Africa, the Cape Verde and Canary islands, and European cities and industrial complexes, plumes which in extreme cases can produce a downwind deterioration in marine air quality comparable to that seen in many cities, and can persist hundreds of kilometres from land.     

Soot in the arctic snowpack: a cause for perturbations in radiative transfer

Recent data collected in the Arctic have demonstrated the transport of atmospheric aerosol of anthropogenic origin into that region. Concern over the radiative effect of the highly-absorbing soot component of this aerosol has resulted in a variety of atmospheric sampling efforts aimed at assessing the climatic impact of this component. However, little attention has been given to the measurement of soot deposited on the Arctic snowpack and the resulting perturbation of snow albedo, snowmelt rates and radiative transfer. Here we report measurements of light-absorbing material in the Arctic snowpack for longitudes from 25 E to 160 W. The contributions to light absorption due to natural crustal and soot aerosol are identified by their wavelength dependence. Reductions in Arctic snow albedo of one to several percent appear probable for the soot/ice mass fractions obtained to date. Estimates of the impact of this reduced albedo on the Arctic radiation budget over a season are shown to approximately equal that of the Arctic haze itself. The absorption of shortwave radiation by the springtime snowpack is estimated to be 5–10% higher than that of soot-free snow for this data.     

Aerosol size and chemical characteristics at Mumbai,India, during the INDOEX-IFP (1999)

Aerosol size and chemical characteristics govern their optical and radiative effects and their potential for cloud nucleation. This paper reports the size and chemical characteristics of surface aerosols measured at Mumbai during the Indian Ocean Experiment-Intensive Field Phase (INDOEX-IFP), January–March 1999. Carbonaceous (30%) and ionic (20%) constituents contributed significantly to aerosol mass. High black carbon concentrations and a low organic to black carbon ratio implied the predominance of primary carbonaceous aerosol, while a high nss-sulphate contribution in the fine mode, suggested a probable anthropogenic origin. Non-sea-salt potassium (nss-K⁺) and black carbon concentrations correlated during January and early February, with nss-K⁺ in the fine mode contributing 86% of total-K⁺, implying a common origin from a local biomass-burning source. Crustal sources were dominant during late-February and March, with 69% of the aerosol mass present in the coarse mode, and 60% of the variation in PM-10 measured during 12:00–16:00 h being explained by a crustal source factor. Chloride depletion was estimated throughout the study, more significantly during January and early February, from the higher RH and lower Ca²⁺/Na²⁺ ratios. A negative correlation was obtained of chloride with nitrate, indicating probable nitrate substitution. During late-February and March, nitrate correlated with calcium suggesting an association with soil. Nss-sulphate correlated with calcium but not sodium, implying a probable association with crustal aerosols.     

Characterization of atmospheric trace elements on PM2.5 particulate matter over the New York–New Jersey harbor estuary

The purpose of this work is to characterize trace elements associated with atmospheric particulate matter of 2.5 μm and smaller in size (PM_2.5) over the New York–New Jersey (NY–NJ) Harbor Bight. Using low-volume PM_2.5 samplers, aerosol particulate samples were simultaneously collected for the first time at three locations in the region, Sandy Hook in the coast, New Brunswick and Liberty Science Center (Jersey City) in nearby urban areas, during January 1998–January 1999. Sample analysis for trace elements was accomplished by inductively coupled plasma mass spectrometry. Many elements in ambient air exhibit strong spatial gradients from urban centers to the coast, and the concentrations of most elements at Liberty Science Center are significantly higher than at the other two locations. Seasonal patterns are not apparent for most elements at all locations, suggesting continuous contributions from their sources. The elements Pb, Cd, Zn, Cu, Ni, V, Sb, are enriched by factors of 200 to 20,000 relative to their natural abundance in crustal soil. Major sources that contribute to the atmospheric loading of these elements include fossil fuel combustion, oil combustion, metal processing industry, and waste incineration. Atmospheric dry deposition of these trace elements associated with PM_2.5 to the coastal waters of the NY–NJ estuary may account for a significant portion of the total dry deposition fluxes for these elements.     

Atmospheric concentrations of PM2.5 trace elements in the Seoul urban area of South Korea

Fine particles (PM2.5) were collected during all four seasons, from April 2001 to February 2002, in Seoul, South Korea, using an annular denuder system. Elemental compositions of ambient PM2.5 were analyzed using the proton-induced X-ray emission method. The greatest contributors (> or = 2%) to the PM2.5 mass were sulfur (S), silicon (Si), chlorine (Cl), aluminum (Al), and iron (Fe) in the spring; S in the summer; and S and Cl in the fall. S, Cl, and Si were the major elements in the winter. S was the most abundant species among the elements, ranging from 5.3 to 7.9%, followed by Si and Cl. From analysis of variance, PM2.5 mass, Al, Si, potassium, calcium, and Fe showed significant seasonal differences during the four seasons (p < 0.001). Enrichment factor (EF) analysis was carried out to identify the sources affecting the aerosol in the Seoul area. On the basis of the mean EF values, elemental S, copper, zinc, and lead may be emitted from anthropogenic sources (EF > 50). Elemental Al, Si, titanium, and Fe may be emitted from crustal sources (EF < 3). Additionally, a correlation analysis was carried out for source identification. The results of the correlation analysis were confirmed by the results of the EF analysis.     

Size distribution of large aerosol particles during AGASP-II: Absence of st. augustine eruptive particles in the Alaskan Arctic

Number distribution data for 0.1–45 μm diameter aerosol were obtained using optical counting and sizing probes flown over the Alaskan Arctic during the second Arctic Gas and Aerosol Sampling Program (AGASP-II), flights 201–203. Due to noise present in the lowest size channels of the optical probes, estimates of the H₂SO₄ component of Arctic haze were not attempted. Large particle (> 0.5 μm diameter) results are presented here. Large particle number and volume concentration were determined along with estimated mass, which was generally </ 0.1μg m⁻³. Lognormal fitting to > 0.3 μg m⁻³ mass loading sizedistributed aerosol data produced a means for comparing volume geometric median diameters (VGMD) for these higher-mass time intervals. These VGMDs showed that solid crustal particles previously observed during AGASP-II had VGMDs in the 1.2–1.6 μm range and that the shape of these fitted lognormal distributions was essentially constant. This result suggests very-long-range transport from a distant crustal source and, in conjunction with aerosol physical and chemical characterization data, argues against the presence of the Mt. Augustine eruptive particles during AGASP-II Alaskan Arctic sampling.     

Source apportionment analysis of atmospheric particulates in an industrialised urban site in southwestern Spain

A detailed physical and chemical characterisation of total suspended particles (TSP) in the highly industrialised city of Huelva (southwestern Spain) was carried out. The results evidenced a coarse grain-size prevalence (PM₁₀ accounting for only 40% of TSP mass, 37 and 91 μg/m³, respectively). PM₁₀ levels are in the usual range for urban background sites in Spain. The crustal, anthropogenic and marine components accounted for a mean of a 40%, 24% and 5% of bulk TSP, respectively. As expected from the industrial activities, relatively high PO₄³⁻ and As levels for an urban site were detected. In addition to the crustal and marine components, source apportionment analysis revealed three additional emission sources influencing the levels and composition of TSP: (a) a petrochemical source, (b) a mixed metallurgical-phosphate source, (c) and an unknown source (Sb and NO₃⁻).Due to the high local emissions, the mean TSP anthropogenic contribution (mostly PM₁₀) obtained for all possible air mass transport scenarios reached 18–29 μg/m³. The 2010 annual EU PM₁₀ limit value (20 μg/m³) would be exceeded by the anthropogenic load recorded for all the air mass transport scenarios, with the exception of the North Atlantic transport (only 15% of the sampling days). Under African air mass transport scenarios (20% of sampling days), the TSP crustal contribution reached near three times the local crustal contribution. It must be pointed out that this crustal input should diminish when sampling PM₁₀ due to the dominant coarse size distribution of this type of particles.     

Characterization of aerosol over the Northern South China Sea during two cruises in 2003

Atmospheric transport of trace elements has been found to be an important pathway for their input to the ocean. TSP, PM10, and PM2.5 aerosol samples were collected over the Northern South China Sea in two cruises in 2003 to estimate the input of aerosol from continent to the ocean. About 23 elements and 14 soluble ions in aerosol samples were measured. The average mass concentration of TSP in Cruise I in January (78 μg m⁻³) was ∼twice of that in Cruise II in April (37 μg m⁻³). Together with the crustal component, heavy metals from pollution sources over the land (especially from the industry and automobiles in Guangzhou) were transported to and deposited into the ocean. The atmospheric MSA concentrations in PM2.5 (0.048 μg m⁻³ in Cruise I and 0.043 μg m⁻³ in Cruise II) over Northern South China Sea were comparable to those over other coastal regions. The ratio of non-sea-salt (NSS)-sulfate to MSA is 103-655 for Cruise I and 15-440 for Cruise II in PM2.5 samples, which were much higher than those over remote oceans. The estimated anthropogenic sulfate accounts for 83–98% in Cruise I and 63–95% in Cruise II of the total NSS-sulfate. Fe (II) concentration in the aerosols collected over the ocean ranged from 0.1 to 0.9 μg m⁻³, accounting for 16–82% of the total iron in the aerosol, which could affect the marine biogeochemical cycle greatly.     

A chemical characterization of wintertime haze in phoenix,Arizona

Size-fractionated atmospheric particulate matter samples and several gas phase species were measured in Phoenix, Arizona to chemically characterize the wintertime haze which develops during late-night and early-morning hours. These samples were analyzed for a dozen major and minor components including various combustion source tracers, soil related species, carbonaceous material and acid-base species. Organic material, ‘soot’, nitrates, sulfates and crustal material accounted for a majority (~ 90%) of the measured aerosol mass. The gas phase species CO, NO, NO₂,O₃ and water vapor were also monitored.The results from this 1-month study indicate that the haze is usually due to locally generated material with the automobile being the dominant source. The mixture of sources results in a haze that is apparently a carbon and nitrate rich aerosol. On occasion, imported material containing high levels of sulfate can mix with locally generated material to also impact on air-quality and visibility in the area.     

Characterization of major pollution events (dust, haze, and two festival events) at Agra, India

Total suspended particulate (TSP) samples were collected during dust, haze, and two festival events (Holi and Diwali) from February 2009 to June 2010. Pollutant gases (NO₂, SO₂, and O₃) along with the meteorological parameters were also measured during the four pollution events at Agra. The concentration of pollutant gases decreases during dust events (DEs), but the levels of the gases increase during other pollution events indicating the impact of anthropogenic emissions. The mass concentrations were about two times higher during pollution events than normal days (NDs). High TSP concentrations during Holi and Diwali events may be attributed to anthropogenic activities while increased combustion sources in addition to stagnant meteorological conditions contributed to high TSP mass during haze events. On the other hand, long-range transport of atmospheric particles plays a major role during DEs. In the dust samples, Ca²⁺, Cl^?, NO₃ ^?, and SO₄ ^2? were the most abundant ions and Ca²⁺ alone accounted for 22 % of the total ionic mass, while during haze event, the concentrations of secondary aerosols species, viz., NO₃ ^?, SO₄ ^2?, and NH₄ ⁺, were 3.6, 3.3, and 5.1 times higher than the normal days. During Diwali, SO₄ ^2? concentration (17.8 μg?m^?3) was highest followed by NO₃ ^?, K⁺, and Cl^? while the Holi samples were strongly enriched with Cl^? and K⁺ which together made up 32.7 % of the total water-soluble ions. The ion balances indicate that the haze samples were acidic. On the other hand, Holi, Diwali, and DE samples were enriched with cations. The carbonaceous aerosol shows strong variation with the highest concentration during Holi followed by haze, Diwali, DEs, and NDs. However, the secondary organic carbon concentration follows the order haze > DEs > Diwali > Holi > NDs. The scanning electron microscope/EDX results indicate that KCl and carbon-rich particles were more dominant during Holi and haze events while DE samples were enriched with particles of crustal origin.     

Quantitative chemical composition and characteristics of aerosols over western India: One-year record of temporal variability

One-year quantitative chemical data set consisting of water-soluble constituents (NH₄⁺, Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl^?, NO₃^?, SO₄^2? and HCO₃^?), crustal and trace elements (Al, Fe, Ca, Mg, K, Mn, Zn, Pb) and carbonaceous species (OC, EC) in ambient aerosols, collected over an urban site located in a high-dust semi-arid region of western India, reveals excellent linear relationship (r² = 0.92; slope = 0.96 ± 0.05) between gravimetrically assessed TSP (total suspended particulates) and chemically analyzed aerosol mass. The TSP abundance ranging from 60 to 250 μg m^?3, over a period of 12 months (January–December), is dominated by mineral dust (～70%); whereas contribution from sea-salts, anthropogenic and carbonaceous species exhibits significant temporal variability depending upon the wind regimes. The mineral dust is enriched in Ca, Mg and Fe with respect to upper continental crust (UCC); whereas Zn and Pb exhibit a characteristic anthropogenic source and high enrichment factors. The carbonaceous species show significant seasonality; with dominance of OC (range: 4.6–28 μg m^?3; average: 12.8 μg m^?3; SD: 6.8) and minor contribution from EC (range: 0.3–4.4 μg m^?3; average: 2.4 μg m^?3; SD: 1.4). The observed concentrations are significantly lower than those reported for the metro cities in South Asia but the OC/EC ratios (range: 4.3–35; average: 8.3; SD: 5.7) are significantly higher than the characteristic ratio (～2–4) reported for the urban atmosphere. Such quantitative chemical characterization of aerosols is essential in assessing their role in atmospheric chemistry and climate change. This study could also be useful in understanding the physical and optical aerosol properties documented from the same site and thus, in validating regional climate models.     

Mixing and transformation of Asian dust with pollution in the two dust storms over the northern China in 2006

To study the mixing and transformation of Asian dust with pollution in the two dust storms over the northern China in 2006, both TSP and PM_2.5 samples were collected at three sites of northern China in addition to the dry deposition samples collected in an episode in Beijing. 23 elements, 15 ions, and 16 PAHs in each sample were analyzed. The two dust storms in northern China were observed in April 8–10 (DS1) and April 16–18 (DS2). Compared to DS2, DS1 was weaker and more polluted with stronger mixing between crustal and pollutant aerosols during their long-range transport. The concentrations of pollution species, e.g. pollution elements, ions, and PAHs were higher in DS1 than that in DS2, while the crustal species showed adverse variation. The correlation between chemical species and Al and between PAH(4) and PAH(5,6) further confirmed the stronger chemical transformation and aerosol mixing in DS1 than that in DS2. Back trajectory and chemical analysis revealed that in DS1 the air masses at Beijing were mostly from southern or southwestern direction at lower altitude with much more pollution, while in DS2 the air masses were mostly from the northwestern and northern direction with dust mainly, which explained why there was a stronger mixing of dust with pollution aerosol in DS1 than that in DS2 over Beijing.     

Characterisation of PM10 and PM2.5 particulate matter in the ambient air of Milan (Italy)

24-h simultaneous samplings of PM10 and PM2.5 particulate matter (PM) have been carried out during the period December 1997–September 1998 in the central urban area of Milan. The mass concentrations of the two fractions showed significant daily variations linked to different thermodynamic conditions of the planetary boundary layer (PBL) and characterised by higher values during wintertime. The elemental composition, determined by energy dispersive X-ray fluorescence technique, was quite different in the two fractions: in the finer one the presence of elements with crustal origin is reduced while the anthropogenic elements, with a relevant environmental and health impact, appear to be enriched. The composition data allowed a quantification of two major components of the atmospheric particulate: sulphates (mainly of secondary origin) and particles with crustal origin. An important but unmeasured component is likely constituted by organic and elemental carbon compounds.The multivariate analysis of elements, gaseous pollutants and mass concentration data-sets leads to the identification of four main sources contributing to PM10 and PM2.5 composition: vehicles exhaust emissions, resuspended crustal dust, secondary sulphates and industrial emissions. The existence of a possible background component with non-local origin is also suggested.