A method for developing ozone exposures that mimic ambient conditions in agricultural areas

Ozone fumigations that mimic ambient ozone distributions facilitate the development of links between

• 1.(1) vegetative effects results that are generated in the laboratory and the field and
• 2.(2) predictive effects models that depend upon ambient air quality data.

Experimental exposure profiles were constructed from a readily available ambient air quality data base (i.e. EPA SAROAD). Air quality data from selected monitoring sites were characterized over the 5-month growing season by identifying

• 1.(a) the number of occurrences of hourly ozone concentrations equal to or above 0.07 ppm,
• 2.(b) the number of days of each episode,
• 3.(c) the number of days between episodes and
• 4.(d) the rate of rise and decline of the daily ozone concentrations.

An episodic profile was constructed incorporating the information into a representative 30-day ozone exposure pattern in which the concentration was changed on an hourly basis. In order to compare treatments having equivalent exposures (sum of hourly ozone concentrations equal to or above a minimum value) but dissimilar temporal distributions of hourly concentrations, a second profile was created. This profile was characterized by a repeated daily incremental rise and decline in ozone concentration that had the same hourly maximum concentration each day. The use of experimental exposure profiles mimicking ambient air quality characteristics and applied under controlled experimental conditions permits the examination of important exposure parameters on plant response.     

Co-occurrence patterns of gaseous air pollutant pairs at different minimum concentrations in the United States

The frequency of co-occurrences for SO₂NO₂, SO₂/O₃ and O₃/NO₂ at rural and remote monitoring sites in the United States was characterized for the months of May-September for the years 1978–1982. Minimum hourly concentrations of 0.03 and 0.05 ppm of each gas were used as the criteria for defining a ‘co-occurrence’. The objectives of this study were to:

• 1.(1) identify the types of co-occurrence patterns and their frequency;
• 2.(2) identify whether the frequency of hourly simultaneous co-occurrences increased substantially when the minimum concentration was lowered (e.g. from 0.05 to 0.03 ppm) for each pollutant; and
• 3.(3) determine whether the frequency of co-occurrences showed large year-to-year variation.

For all pollutant pairs and co-occurrence thresholds (i.e. 0.03 and 0.05 ppm), the frequency of daily and hourly co-occurrences was low for most sites. Year-to-year variability was found to be insignificant; most of the monitoring sites experienced co-occurrences of any type less than 12% of the 153 days. Based on our observations, researchers attempting to assess the potential effects of SO₂/NO₂, SO₂/O₃ and O₃/NO₂ in the United States should construct simulated exposure regimes so that

• 1.(1) hourly simultaneous and daily simultaneous-only co-occurrences are fairly rare and
• 2.(2) when co-occurrences are present, complex-sequential and sequential-only co-occurrence patterns predominate.

     

The co-occurrence of potentially phytotoxic concentrations of various gaseous air pollutants

Studies on impacts of air pollutants on vegetation have focused primarily on individual pollutants: ozone, sulfur dioxide and nitrogen dioxide. The impacts of pollutant combinations have not been extensively studied and there has been no concerted effort to ensure that experimental regimes for combined pollutant exposures are representative of ambient pollutant concentration, frequency, duration and time intervals between events. Most studies concerning the impact of pollutant combinations on vegetation have used concentrations of 0.05 ppm and greater. Therefore, co-occurrence was defined as the simultaneous occurrence of hourly averaged concentrations of 0.05 ppm or greater for pollutant pairs (SO₂/NO₂, O₃/SO₂, or O₃/NO₂). Air quality information from three data bases (EPA-SAROAD, EPRI-SURE and TVA) was analyzed to determine the frequency of co-occurrence for pollutant pairs. Ambient air quality data representing a diverse range of monitoring sites (e.g. rural, remote, city center, urban, near urban, etc.) were used in the analysis. Results showed that at most sites (1) the co-occurrence of two-pollutant mixtures lasted only a few hours per episode, (2) the time interval between episodes was generally large (weeks, sometimes months) and (3) most studies have used more intense exposure regimes than occurred at most monitored sites. When designing vegetation experiments for assessing pollutant mixture effects, it may be desirable to give greater emphasis to sequential patterns of exposure. It is suggested that future work is required before a reliable estimate can be made of the environmental significance of pollutant mixtures on vegetation.     

Estimated washout coefficients for sulphur dioxide,nitric oxide,nitrogen dioxide and ozone

The washout coefficient of a gas in air is the fraction of it removed in unit time by rain below cloud base. The ‘apparent’ coefficients were estimated by statistically comparing hourly ground-level concentrations just before and at the onset of heavy, non-frontal rain. The concentrations were obtained from 5 y of continuous monitoring at a rural site.The coefficient (s⁻¹) estimated for SO₂ was (2.61 ± 0.14) × 10⁻⁵ times the rate of rainfall (mm h ⁻¹). This is completely consistent with a previously published value derived from the data from 10 rural sites for one year, and both estimates are consistent with published values of dissolved SO₂ in rainwater at another rural site, giving some confidence in the technique.The values of the coefficients estimated for NO and NO₂ were about 40 and 80%, respectively of that for SO₂. Some nitrite is found in rainwater, but not enough to explain the washout found. However, the analysers used would measure HNO₃ aerosols as NO₂, and these are very soluble. In addition, fast reactions are known which can convert oxides of nitrogen into soluble nitrates, present in sufficient concentration in rainwater.The statistical process leads to the coefficient estimated for O₃ being negative, implying that O₃ is produced at the time of rain. This is most probably due to the strong winds and turbulence which accompany heavy rain, giving replenishment of low-level O₃ from upper air levels where O₃ is normally produced. No systematic changes in the other gas concentrations accompany the changes in O₃ values.     

Precision of atmospheric dry deposition data from the Clean Air Status and Trends Network

A collocated, dry deposition sampling program was begun in January 1987 by the US Environmental Protection Agency to provide ongoing estimates of the overall precision of dry deposition and supporting data entering the Clean Air Status and Trends Network (CASTNet) archive. Duplicate sets of dry deposition sampling instruments were installed adjacent to existing instruments and have been operated for various periods at 11 collocated field sites. All sampling and operations were performed using standard CASTNet procedures. The current study documents the bias-corrected precision of CASTNet data based on collocated measurements made at paired sampling sites representative of sites across the network. These precision estimates include the variability for all operations from sampling to data storage in the archive. Precision estimates are provided for hourly, instrumental ozone (O₃) concentration and meteorological measurements, hourly model estimates of deposition velocity (V_d) from collocated measurements of model inputs, hourly O₃ deposition estimates, weekly filter pack determinations of selected atmospheric chemical species, and weekly estimates of V_d and deposition for each monitored filter pack chemical species and O₃.Estimates of variability of weekly pollutant concentrations, expressed as coefficients of variation, depend on chemical species: NO₃⁻∼8.1%; HNO₃∼6.4%; SO₂∼4.3%; NH₄⁺∼3.7%; SO₄²⁻∼2.3%; and O₃∼1.3%. Precision of estimates of weekly V_d from collocated measurements of model inputs also depends on the chemical species: aerosols ∼2.8%; HNO₃∼2.6%; SO₂∼3.0%; and O₃∼2.0%. Corresponding precision of weekly deposition estimates are: NO₃⁻∼8.6%; HNO₃⁻∼5.2%; SO₂∼5.6%; NH₄⁺∼3.9%; SO₄²⁻∼3.5%; and O₃∼3.3%. Precision of weekly concentration, V_d estimates, and deposition estimates are comparable in magnitude and slightly smaller than the corresponding hourly values. Annual precision estimates, although uncertain due to their small sample size in the current study, are consistent with the corresponding weekly values.     

Absorption of Gaseous Air Pollutants By a Standardized Plant Canopy

Concentration profiles for hydrogen fluoride(HF), sulfur dioxide(SO₂), ozone (O₃), nitrogen dioxide(NO₂), and nitric oxide(NO) generated in a standardized alfalfa canopy are presented. Wind, light, temperature, and carbon dioxide(CO₂) profiles, canopy pollutant uptake rates, and canopy structural data are also given. Canopy pollutant concentration profile characteristics were studied to evaluate the relative potentials for major air pollutants to penetrate into canopies. The study was conducted in an environmental growth chamber equipped to control automatically environmental conditions and monitor continuously gas exchange rates. HF, SO₂, and NO₂ profiles suggested that these gases were removed efficiently by the upper portion of the canopy as well as by the immediate subsurface vegetation. The steady state HF profile showed the greatest displacement within the canopy. The NO profile was displaced the least. The uptake rate of NO by plants was apparently too slow in comparison with gas transport and mixing within the canopy to affect the internal profile substantially. O₃ appeared to be readily deposited on the surface tissues, but the deeper tissues in the canopy had less effect on the concentration profile. Data are also presented to show the relationship between NO₂ concentration within the canopy and changes in the air concentration above the vegetation. The results indicated that gas transport between the atmosphere and canopy interior was rapid. The data presented should be of current interest to agriculturists, researchers, administrators, and environmental planners concerned with effects of air pollutants on plants and on the fate of pollutants in the microenvironment.     

A comparison of hourly with annual air pollutant emissions: Implications for estimating acute exposure and public health risk

Health risks from air pollutants are evaluated by comparing chronic (i.e., an average over 1 yr or greater) or acute (typically 1-hr) exposure estimates with chemical- and duration-specific reference values or standards. When estimating long-term pollutant concentrations via exposure modeling, facility-level annual average emission rates are readily available as model inputs for most air pollutants. In contrast, there are far fewer facility-level hour-by-hour emission rates available for many of these same pollutants. In this report, we first analyze hour-by-hour emission rates for total reduced sulfur (TRS) compounds from eight kraft pulp mill operations. This data set is used to demonstrate discrepancies between estimating exposure based on a single TRS emission rate that has been calculated as the mean of all operating hours of the year, as opposed to reported hourly emission rates. A similar analysis is then performed using reported hourly emission rates for sulfur dioxide (SO₂) and oxides of nitrogen (NO_x) from three power generating units from a U.S. power plant. Results demonstrate greater variability at kraft pulp mill operations, with ratios of reported hourly to average hourly TRS emissions ranging from less than 1 to greater than 160 during routine facility operations. Thus, if fluctuations in hourly emission rates are not accounted for, over- or underestimates of hourly exposure, and thus acute health risk, may occur. In addition to this analysis, we also demonstrate an additional challenge when assessing health risk based on hourly exposures: the lack of human health reference values based on 1-hr exposures.

Implications: Largely due to the lack of reported hourly emission rate data for many air pollutants, an hourly average emission rate (calculated from an annual emission rate) is often used when modeling the potential for acute health risk. We calculated ratios between reported hourly and hourly average emission rates from pulp and paper mills and a U.S. power plant to demonstrate that if not considered, hourly fluctuations in emissions could result in an over- or underestimation of exposure and risk. We also demonstrate the lack of 1-hr human health reference values meant to be protective of the general population, including children.     

Continuous measurement of particulate and sulfur dioxide concentrations in Junk Bay,Hong Kong

As part of an environmental impact assessment for building a new town in Junk Bay, continuous measurement of SO₂ and particulate concentrations was carried out from October 1981 to June 1982 at three sites in Junk Bay to study the air quality in the area. Flame photometric SO₂ analyzers were used to measure ambient SO₂ level, whereas tape monitors were used to measure the ambient suspended particulate level (in terms of soiling index, or coefficient of haze per 1000 feet). It was found that the mean SO₂ concentrations at the three monitoring sites ranged from 5μg m⁻³ to 35μg m⁻³. Maximum daily values up to about 250 μg m⁻³ and hourly values up to 800 μg m ⁻³ had been recorded on occasion. Comparison of the hourly meteorological data and the hourly SO₂ concentrations in four high-SO₂-level days suggested that the ‘sulfur dioxide episodes’ were all associated with very light wind speeds and local sources. The mean coefficient of haze level in Junk Bay was less than one, which corresponded to very slight particulate pollution.     

Acid gases and acid in rain monitored for over 5 years in rural east-central England

Sulphur dioxide has been monitored for many years at several rural sites in east-central England, and its temporal and spatial distribution and sources are reasonably well established. The air quality limit values of the Council of the European Communities are not exceeded. NO, NO₂ and O₃ have also been measured continuously for over 5 years at one rural site and for 2 years at another three sites in this region, and preliminary distribution patterns of these gases are available. The oxides of nitrogen, like SO₂, are greatest on average in winter months, but O₃ is greatest on average in May, although peak hourly events exceeding the World Health Organisation Environmental Health Criteria (WHOEHC) are common during other summer months. The oxides of nitrogen have exceeded the WHOEHC on occasion, and these are thought to have derived mostly from motor vehicles in distant towns, the gases then travelling in shallow inversion layers.Rainwater acidities and other constituents have been measured for over 7 years at several sites in the region, initially on a weekly basis, but in recent years on a daily and then an hourly basis at a few sites, and preliminary distribution patterns are available. Rainwater acidity is greatest on average in Spring, following the O₃ pattern more closely than those of the other gases. Daily deposited acidity is episodal. Hourly concentrations of acidity in rainwater during rain events show more than one type of pattern.     

Characteristics and origins of air pollutants in Wuhan,China, based on observations and hybrid receptor models

To identify the characteristics of air pollutants and factors attributing to the formation of haze in Wuhan, this study analyzed the hourly observations of air pollutants (PM_2.5, PM₁₀, NO₂, SO₂, O₃, and CO) from March 1, 2013, to February 28, 2014, and used hybrid receptor models for a case study. The results showed that the annual average concentrations for PM_2.5, PM₁₀, NO₂, SO₂, O₃, and CO during the whole period were 89.6 μg m^?3, 134.9 μg m^?3, 54.9 μg m^?3, 32.4 μg m^?3, 62.3 μg m^?3, and 1.1 mg m^?3, respectively. The monthly variations revealed that the peak values of PM_2.5, PM₁₀, NO₂, SO₂, and CO occurred in December because of increased local emissions and severe weather conditions, while the lowest values occurred in July mainly due to larger precipitation. The maximum O₃ concentrations occurred in warm seasons from May to August, which may be partly due to the high temperature and solar radiation. Diurnal analysis showed that hourly PM_2.5, PM₁₀, NO₂, and CO concentrations had two ascending stages accompanying by the two traffic peaks. However, the O₃ concentration variations were different with the highest concentration in the afternoon. A case study utilizing hybrid receptor models showed the significant impact of regional transport on the haze formation in Wuhan and revealed that the mainly potential polluted sources were located in the north and south of Wuhan, such as Baoding and Handan in Hebei province, and Changsha in Hunan province. Implications: Wuhan city requires a 5% reduction of the annual mean of PM_2.5 concentration by the end of 2017. In order to accomplish this goal, Wuhan has adopted some measures to improve its air quality. This work has determined the main pollution sources that affect the formation of haze in Wuhan by transport. We showed that apart from the local emissions, north and south of Wuhan were the potential sources contributing to the high PM_2.5 concentrations in Wuhan, such as Baoding and Handan in Hebei province, Zhumadian and Jiaozuo in Henan province, and Changsha and Zhuzhou in Hunan province.     

A study of the formation of aerosols in filtered atmospheric air at Trombay,Bombay

A set of atmospheric measurements was carried out at Trombay, Bombay to study the correlation between the concentration variation of freshly formed atmospheric aerosols and the variations in the ambient concentrations of some of the atmospheric trace gases. Daily values of the aerosol concentration both in filtered and unfiltered air together with the concentrations of SO₂, NO, O₃ and α-activity were measured during a period of 11 months. Statistical analysis of the data shows that variation of particle concentration in the filtered air is a function of not only SO₂ variation but also O₃ and α-activity variations. The various parameters that are likely to be involved in the formation and the variations of small particle concentration in the atmosphere have been identified.     

Ozone and Other Air Quality-Related Variables Affecting Visibility in the Southeast United States

Abstract

An analysis of ozone (O₃) concentrations and several other air quality-related variables was performed to elucidate their relationship with visibility at five urban and semi-urban locations in the southeast United States during the summer seasons of 1980-1996. The role and impact of O₃ on aerosols was investigated to ascertain a relationship with visibility. Regional trend analysis over the 1980s reveals an increase in maximum O₃ concentration coupled with a decrease in visibility. However, a similar analysis for the 1990s shows a leveling-off of both O₃ and visibility; in both cases, the results were not statistically significant at the 5% level. A case study of site-specific trends at Nashville, TN, followed similar trends. To better understand the relationships between O₃ concentration and visibility, the analysis was varied from yearly through daily to hourly averaged values. This increased temporal resolution showed a statistically significant inverse relationship between visibility and O₃. Site-specific hourly r² values ranged from 0.02 to 0.43. Additionally, by performing back-trajectory analysis, it was found that the visibility degraded by air mass migration over polluted areas.     

AERMOD performance evaluation for three coal-fired electrical generating units in Southwest Indiana

An evaluation of the steady-state dispersion model AERMOD was conducted to determine its accuracy at predicting hourly ground-level concentrations of sulfur dioxide (SO₂) by comparing model-predicted concentrations to a full year of monitored SO₂ data. The two study sites are comprised of three coal-fired electrical generating units (EGUs) located in southwest Indiana. The sites are characterized by tall, buoyant stacks, flat terrain, multiple SO₂ monitors, and relatively isolated locations. AERMOD v12060 and AERMOD v12345 with BETA options were evaluated at each study site. For the six monitor–receptor pairs evaluated, AERMOD showed generally good agreement with monitor values for the hourly 99th percentile SO₂ design value, with design value ratios that ranged from 0.92 to 1.99. AERMOD was within acceptable performance limits for the Robust Highest Concentration (RHC) statistic (RHC ratios ranged from 0.54 to 1.71) at all six monitors. Analysis of the top 5% of hourly concentrations at the six monitor–receptor sites, paired in time and space, indicated poor model performance in the upper concentration range. The amount of hourly model predicted data that was within a factor of 2 of observations at these higher concentrations ranged from 14 to 43% over the six sites. Analysis of subsets of data showed consistent overprediction during low wind speed and unstable meteorological conditions, and underprediction during stable, low wind conditions. Hourly paired comparisons represent a stringent measure of model performance; however, given the potential for application of hourly model predictions to the SO₂ NAAQS design value, this may be appropriate. At these two sites, AERMOD v12345 BETA options do not improve model performance.

Implications:

A regulatory evaluation of AERMOD utilizing quantile-quantile (Q–Q) plots, the RHC statistic, and 99th percentile design value concentrations indicates that model performance is acceptable according to widely accepted regulatory performance limits. However, a scientific evaluation examining hourly paired monitor and model values at concentrations of interest indicates overprediction and underprediction bias that is outside of acceptable model performance measures. Overprediction of 1-hr SO₂ concentrations by AERMOD presents major ramifications for state and local permitting authorities when establishing emission limits.     

Description and evaluation of a model of deposition velocities for routine estimates of dry deposition over North America. Part II: review of past measurements and model results

Numerical sensitivity tests and four months of complete model runs have been conducted for the Routine Deposition Model (RDM). The influence of individual model inputs on dry deposition velocity as a function of land-use category (LUC) and pollutant (SO₂, O₃, SO²⁻₄ and HNO₃) were examined over a realistic range of values for solar radiation, stability and wind speed. Spatial and temporal variations in RDM deposition velocity (V_d) during June – September 1996 time period generated using meteorological input from a mesoscale model run at 35 km resolution over north-eastern North America were also examined. Comparison of RDM V_d values to a variety of measurements of dry deposition velocities of SO₂, O₃, SO²⁻₄ and NHO₃ that have been reported in the literature demonstrated that RDM produces realistic results. Over northeastern NA RDM monthly averaged dry deposition velocities for SO₂ vary from 0.2 to 3.0 cm s⁻¹ with the highest deposition velocities over water surfaces. For O₃, the monthly averaged dry deposition velocities are from 0.05 to 1.0 cm s⁻¹ with the lowest values over water surfaces and the highest over forested areas. For HNO₃, the monthly averaged dry deposition velocities have the range of 0.5 to 6 cm s⁻¹, with the highest values for forested areas. For SO²⁻₄, they range from 0.05–1.5 cm s⁻¹, with the lowest values over water and the highest over forest. The monthly averaged dry deposition velocities for SO₂ and O₃ are higher in the growing season compared to the fall, but this behaviour is not apparent for HNO₃ and sulphate. In the daytime, the hourly averaged dry deposition velocities for SO₂, O₃, SO²⁻₄ and HNO₃ are higher than that in the nighttime over most of the vegetated area. The diurnal variation is most evident for surfaces with large values for leaf area index (LAI), such as forests. Based on the results presented in this paper, it is concluded that RDM V_d values can be combined with measured air concentrations over hourly, daily or weekly periods to determine dry deposition amounts and with wet deposition measurements to provide seasonal estimates of total deposition and estimates of the relative importance of dry deposition.     

An Index and Model of Human Response to Air Quality

This study undertook an empirical Investigation of human response to air quality. Home interviews of 475 respondents living in 22 neighborhoods of Los Angeles County had elicited information on respondent socioeconomic characteristics, behavioral patterns, and measures of human response to air quality. This data base was then augmented with nine measures of actual air quality for six time frames for each neighborhood.

An observer-based air quality index (OBAQI) was constructed based upon which combination of air quality variables correlated best with the percentage of neighborhood respondents who perceived “smoggy air.” The best combination (OBAQI 3) consisted of prevailing visibility, O₃, and SO₂, each measured as the annual number of days that a selected standard had been equalled or exceeded. Subsequently, multiple regression models were constructed using this index as a predictor of aggregated perception of air quality. In addition to a general model for all neighborhoods, separate models were constructed for clusters of neighborhoods of similar micrometeorology as approximated by uniform elevations and/or coastal distances. Zones of homogeneous air quality and micrometeorology were then defined. Within these zones variation in four measures of human response to air quality was associated with respondent socioeconomic characteristics and behavioral patterns. Both the index and model could prove useful in gauging public response to proposed actions of air quality management districts.     

Estimating Future NO2 Levels in the Greater Los Angeles Area by Source–Type Contribution

Two indicator pollutants, carbon monoxide (CO) for mobile source influence and sulfur dioxide (SO₂) for stationary source influence, were used to estimate source-type contributions to ambient NO₂ levels in a base year and to predict NO₂ concentrations in a future year. For a specific source-receptor pair, the so-called influence coefficient of each of three source categories (mobile sources, power plants, and other stationary sources) was determined empirically from concurrent measurements of CO and SO₂ concentrations at the receptor site and CO and SO₂ emissions from each source category in the source area. Those coefficients, which are considered time invariant, were used in conjunction with the base year and future year NO _x emission values to estimate source-type contribution to ambient NO₂ levels at seven study sites selected from the Greater Los Angeles area for both the base year period, 1974 through 1976, and the future goal year of 1987 in which the air quality standards for NO₂ are to be attained. The estimated NO₂ air quality at the seven sites is found to meet the national annual standard of 5 pphm and over 99.9% of total hours, the California 1-hr NO₂ standard of 25 pphm in 1987. The estimated power plant contributions to ambient NO₂ levels are found to be considerably smaller than those to total NO _x emissions in the area. Providing that reasonably complete air quality and emissions data are available, the present analysis method may prove to be a useful tool in evaluating source contributions to both short-term peak and long-term average NO₂ concentrations for use in control strategy development.     

粘胶基活性炭纤维用于低浓度SO2常温脱除的实验研究

活性炭纤维（ACF）是一种新型功能性炭材料。应用粘胶基活性炭纤维（cellulose-ACF）对低浓度SO₂（571 mg/m³）进行吸附氧化实验，通过改变活性炭纤维量、SO₂浓度、氧浓度，观察cellulose-ACF脱除低浓度SO₂能力的变化规律。实验结果表明，随着活性炭纤维量、氧浓度的增加，cellulose-ACF对低浓度SO2的脱除能力增强。在此基础上展望活性炭纤维在大气环保领域的应用前景。     

Controls on hourly variations in urban background air pollutant concentrations

Average 21st century concentrations of urban air pollutants linked to cardiorespiratory disease are not declining, and commonly exceed legal limits. Even below such limits, health effects are being observed and may be related to transient daytime peaks in pollutant concentrations. With this in mind, we analyse >52,000 hourly urban background readings of PM₁₀ and pollutant gases throughout 2007 at a European town with legal annual average concentrations of common pollutants, but with a documented air pollution-related cardiorespiratory health problem, and demonstrate the hourly variations in PM₁₀, SO₂, NO_x, CO and O₃. Back-trajectory analysis was applied to track the arrival of exotic PM₁₀ intrusions, the main controls on air pollutants were identified, and the typical hourly pattern on ambient concentrations during 2007 was profiled. Emphasis was placed on “worst case” data (>90th percentile), when health effects are likely to be greatest. The data show marked daytime variations in pollutants result from rush-hour traffic-related pollution spikes, midday industrial SO₂ maxima, and afternoon O₃ peaks. African dust intrusions enhance PM₁₀ levels at whatever hour, whereas European PM incursions produce pronounced evening peaks due to their transport direction (across an industrial traffic corridor). Transient peak profiling moves us closer to the reality of personal outdoor exposure to inhalable pollutants in a given urban area. We argue that such an approach to monitoring data potentially offers more to air pollution health effect studies than using only 24 h or annual averages.     

Trends of air pollution in the Fichtelgebirge Mountains, Bavaria

We analyzed 13 years of hourly measurements of SO₂, NO_x, and O₃, at forest ecosystem research sites in SE Germany. A quasi-continuous data record was obtained by combining data sets from two locations. Before interpreting trends in the combined data set, we analyzed if the change of location introduced a systematic bias. We employed autocorrelation functions, Hurst statistics, complexity analysis, and recurrence quantification and found that the partial data sets exhibited no indication of the presence of any bias. For SO₂, we also compared the data from the forest sites with data obtained in nearby cities and also found no indications for any systematic effects. Applying nonparametric trend statistics we found a significant decrease of the SO₂. Most of the observed decrease is due to the reductions of SO₂ emissions in eastern Germany, but reductions in western Germany and the Czech Republic also played important roles. For O₃, we observed a significant increase, the causes of which are unclear from our data alone. No trend was identified for NO_x.     

Particulate matter sources on an hourly timescale in a rural community during the winter

Particulate matter (PM) sources at four different monitoring sites in Alexandra, New Zealand, were investigated on an hourly timescale. Three of the sites were located on a horizontal transect, upwind, central, and downwind of the general katabatic flow pathway. The fourth monitoring site was located at the central site, but at a height of 26 m, using a knuckleboom, when wind conditions permitted. Average hourly PM₁₀ (PM with an aerodynamic diameter <10 μm) concentrations in Alexandra showed slightly different diurnal profiles depending on the sampling site location. Each location did, however, feature a large evening peak and smaller morning peak in PM₁₀ concentrations. The central site in Alexandra experienced the highest PM₁₀ concentrations as a result of PM transport along a number of katabatic flow pathways. A significant difference in PM₁₀ concentrations between the central and elevated sites indicated that a shallow inversion layer formed below the elevated site, limiting the vertical dispersion of pollutants. Four PM₁₀ sources were identified at each of the sites: biomass combustion, vehicles, crustal matter, and marine aerosol. Biomass combustion was identified as the most significant source of PM₁₀, contributing up to 91% of the measured PM₁₀. Plots of the average hourly source contributions to each site revealed that biomass combustion was responsible for both the evening and morning peaks in PM₁₀ concentrations observed at each of the sites, suggesting that Alexandra residents were relighting their fires when they rose in the morning. The identification of PM sources on an hourly timescale can have significant implications for air quality management.

Implications: Monitoring the sources of PM₁₀ on an hourly timescale at multiple sites within an airshed provides extremely useful information for air quality management. Sources responsible for observed peaks in measured diurnal PM₁₀ concentration profiles can be easily identified and targeted for reduction. Also, hourly PM₁₀ sampling can provide crucial information on the role meteorology plays in the development of elevated PM₁₀ concentrations.