Emissions of biogenic sulphur compounds from several wetland soils in Florida

Emission rates of the biogenic sulphur gases hydrogen sulphide, dimethyl sulphide, carbon disulphide and dimethyl disulphide have been measured from the exposed soils of five wetland plant communities in Florida. Dimethyl sulphide and hydrogen sulphide were the predominant species emitted. All the studied ecosystems showed diel variation in the emission rates of the biogenic sulphur gases with the highest emissions rates occurring early- to mid-afternoon, and the lowest emission rates occurring during the early morning. The relative magnitude of emissions from the individual ecosystems followed the trend Distichlis spicata >Avicennia germinans >Batis maritima ≅ Juncus roemerianus ≅ Cladium jamaicense. Only the emission rates from the peaty D. spicata site are comparable in magnitude to previous emission measurements in wetland ecosystems of Spartina alterniflora and associated mud flats.     

Spatial and diel variability in the emissions of some biogenic sulfur compounds from a Florida Spartinaalterniflora coastal zone

Emission rates of the biogenic reduced sulfur gases dimethyl sulfide, dimethyl disulfide, carbon disulfide and hydrogen sulfide were measured from several environments within a Florida Spartina alterniflora coastal zone. Spatial and diel variability was observed in the emission rates of all the sulfur gases. The speciation and magnitude of sulfur emissions can be related to site elevation and the spatial variability of vegetation coverage. Dimethyl sulfide appears to be a metabolic byproduct of S. alterniflora.     

Modelling the atmospheric transport and deposition of sulphur and nitrogen over the United Kingdom and assessment of the influence of SO2 emissions from international shipping

A statistical Lagrangian atmospheric transport model was used to generate annual maps of deposition of sulphur and oxidised and reduced nitrogen for the UK at a 5×5 km² resolution. The model was run using emissions for the year 2002. The model was compared with measurements of gas concentrations (SO₂, NO_x, HNO₃ and NH₃) and of wet deposition and aerosol concentrations of SO₄²⁻, NO₃⁻ and NH₄⁺ from national monitoring networks. Good correlation was obtained, demonstrating that the model is capable of accurately estimating the mass balance and spatial distribution of sulphur and nitrogen compounds in the atmosphere. A future emissions scenario for the year 2020 was used to test the influence of shipping emissions on sulphur deposition in the UK. The results show that, if shipping emissions are assumed to increase at a rate of 2.5% per year, their relative contribution to sulphur deposition is expected to increase from 9% to 28% between 2002 and 2020. The model was compared to both a European scale and a global scale chemical transport model and found to give broad agreement with the magnitude and location of sulphur deposition associated with shipping emissions. Enforcement of the MARPOL convention to reduce the sulphur content in marine fuel to 1% was estimated to result in a 6% reduction in total sulphur deposition to the UK for the year 2020. The percentage area of sensitive habitats with exceedance of critical loads for acidity in the UK was predicted to decrease by 1% with the implementation of the MARPOL convention.     

Carbon disulphide production in laboratory cultures of marine phytoplankton

Carbon disulphide (CS₂) data were collected from axenic monocultures of six species of marine phytoplankton. The tested species included Chaetoceros calcitrans, Phaeodactylum tricornutum, Phaeocystis sp., Porphyridium purpureum, Synechococcus sp. and Isochrysis sp. For a period of between two weeks and forty days, substantial accumulation of CS₂ was found in the cultures of C. calcitrans, P. tricornutum and Phaeocystis sp., whereas the change of CS₂ concentration in the remaining cultures was insignificant. C. calcitrans had a potential for CS₂ production about 10 times higher than P. tricornutum or Phaeocystis sp. The formation of the compound was strongly dependent on the physiological state of the cultured species. More investigation is needed to elucidate the mechanisms responsible for the formation of this sulphur compound in these cultures.     

Annual cycle of gaseous sulfur emissions from a New England Spartina alterniflora marsh

A flow-through chamber was used to measure the net gaseous sulfur fluxes (emission minus uptake) to the atmosphere from an area of Spartina alterniflora in a New England salt marsh. The fluxes of hydrogen sulfide, dimethyl sulfide, carbonyl sulfide, carbon disulfide and dimethyl disulfide were measured monthly over a year to obtain the annual emission estimates. Peak releases of the various sulfur gases did not occur simultaneously but were measured from July through to October depending on the individual sulfur species. The total annual emission was estimated to be 5.8 g S m⁻² y⁻¹, with dimethyl sulfide (49% of the total) and hydrogen sulfide (35% of the total) the major components emitted. The emissions of the other sulfur gases were nearly 10-fold lower.     

Nuclear and coal electric power generation strategies for control of acid rain at Ontario Hydro

Ontario Hydro is committed to achieving major reductions in atmospheric emissions of SO₂ and NO_x in accordance with regulations established by the Ontario Government. Information is provided on electricity demand in Ontario, on Ontario Hydro's generation capacity mix and on the forecast use of generation to meet demand. Emphasis is placed on the comparative economics and emissions of Ontario Hydro's nuclear and coal-fired generation and on the integration of each into a cost-effective emission control program. Emissions of SO₂ and NO_x will be reduced by about 25% by 1986 and by about 50% by 1990, primarily by using nuclear generation to replace coal, by purchasing hydroelectric generation from neighbouring utilities, by controlling coal sulphur levels and by selective application of emission control technology on coal-fired plants.     

Painted surfaces--important sources of polychlorinated biphenyls (PCBs) contamination to the urban and marine environment

A study of a large number of samples of flaking old paint from various buildings in Bergen, Norway (N = 68) suggests that paint may be the most important contemporary source of PCBs in this urban environment with concentrations of PCB₇ up to 3.39 g/kg. Twenty-three of the samples were collected from a single building, and the concentrations were found to vary over 3 orders of magnitude. In addition, 16 concrete samples from a large bridge previously coated with PCB-containing paint were collected and separated into outer- and inner samples indicating that PCBs are still present in high concentrations subsequent to renovation. PCBs were found in several categories of paint from wooden and concrete buildings, potentially introduced to the environment by natural weathering, renovation, and volatilization. Consequently, this dispersion may lead to increased levels of PCBs in urban atmospheres, soils, and harbor sediments where high concentrations have resulted in Governmental advice against consumption of certain seafood.     

The size distribution of marine atmospheric aerosol with regard to primary biological aerosol particles over the South Atlantic Ocean

The marine atmosphere is characterized by particles which originate from the ocean and by those which reached the air by advection from the continent. The bubble-burst mechanism produces both sea salt as well as biological particles. The following article describes the determination of the size distribution of marine aerosol particles with special emphasis on the biological particles. Th data were obtained on three cruises with the German Research Vessel “METEOR” crossing the South Atlantic Ocean. The measurements showed that biological particles amount to 17% in number and 10% in volume concentration. Another type of particle became obvious in the marine atmosphere, the biologically contaminated particle, i.e. particles which consist partly (approximately up to one-third) of biological matter. Their concentration in the evaluated size class (r>2 μm) is higher than the concentration of the pure biological particles. The concentrations vary over about one to two orders of magnitude during all cruises.     

Desorption of polycyclic aromatic hydrocarbons from field-contaminated soil to a two-dimensional hydrophobic surface before and after bioremediation

This study investigated environmental distributions and production mechanisms of chlorinated polycyclic aromatic hydrocarbons (Cl-PAHs) in the sediments from some tidal flats located in Asia. Cl-PAHs were found in sediments taken from Arao tidal flat, Kikuchigawa River and Shirakawa River. The range of ∑Cl-PAHs was from 25.5 to 483 pg g⁻¹ for Kikuchigawa River and Arao tidal flat, respectively.Concentrations of PAHs and Cl-PAHs showed no significant correlations (r = 0.134). This result suggests that the origins of these compounds differ. In the identified Cl-PAH isomers, the most abundant Cl-PAH isomer was 9,10-dichloroanthracene (9,10-di-Cl-ANT) in the three sites. In general, concentrations of Cl-ANTs in the coastal environment are about 3-5 orders of magnitude lower than those of anthracene (ANT). However, concentration ratios between Cl-ANTs and ANT (Cl-ANTs/ANT) in the sediments ranged from 4.1% to 24.6%. This result indicated that Cl-PAHs were not generated under industrial processes but the high concentration ratios have resulted from the contribution of photochemical production of Cl-ANTs in the sediments because ANT is known to have high photochemical reactivity.For examining this phenomenon, ANT adsorbed onto glass beads was irradiated with UV under the mimicked field conditions of tidal flats. As a result, it was noticed that, while chlorinated derivatives were negligible in a light-controlled group, production of 2-Cl-ANT, 9-Cl-ANT and 9,10-diCl-ANT on the irradiated surface were found in this study. These results suggest that photochemical reaction of PAHs can be a potential source of the occurrence of Cl-PAHs in the coastal environment.     

Measurements of the aerosol concentrations of methanesulphonic acid,dimethyl sulphoxide and dimethyl sulphone in the marine atmosphere of the British Isles

Aerosol concentrations of methanesulphonic acid (MSA), dimethyl sulphoxide (DMSO) and dimethyl sulphone (DMSO₂) have been measured from landbased stations at Plymouth (Devon, U.K.), Galway (EIRE), and from various shipboard stations in the North Sea and the North Atlantic Ocean. MSA, DMSO and DMSO₂ all show seasonal cycles with spring/summer maxima and winter minima. The summer concentrations of MSA are approximately an order of magnitude higher than in winter. The general levels of MSA (July 1985 mean = 9.27 × 10⁻⁹ mol m⁻³, December 1986 mean = 1.14 × 10⁻⁹ mol m⁻³) are comparable to those reported from Cape Grim, Tasmania. Modelling indicates that neither MSA nor DMSO₂ are present in sufficient quantity to represent major oxidation pathways for dimethyl sulphide (DMS). Rate constant ratios for both the reactions of DMS and DMSO with OH and IO have been estimated. Hydroxyl radical does not appear to be reactive enough for it to be the major sink of atmospheric DMS. It is also shown that the rate constants for the destruction of DMSO (the main reaction product of the DMS/IO system) with either IO or OH are likely to be slow. Thus low tropospheric concentrations of DMSO tend to indicate that it also is not a major product of DMS oxidation.     

Lichen response to changes in atmospheric sulphur: isotopic evidence.

In June of 1997, several thalli of the lichen species Alectoria sarmentosa were transplanted from a remote area (Bonavista) to an urban area (St John's) on the island of Newfoundland, Canada. The purpose was to assess the response of these epiphytic lichens to a change in the level of atmospheric sulphur pollution as measured by sulphur concentration and isotopic composition. The dominant source of atmospheric sulphur in the Bonavista area is sea spray, therefore, lichens growing there have relatively high sulphur isotopic compositions and low concentrations (approximately + 15 per/thousand, 250 ppm). Atmospheric sulphur in the St John's area is dominated by anthropogenic sources, primarily oil burning. Lichens in this area have lower isotopic compositions and higher concentrations (approximately + 6 per thousand, 500 ppm). The transplanted lichens were monitored monthly for a period of 1 year. In all experiments the sulphur isotopic composition decreased and the sulphur concentration increased linearly. It is estimated that, within 18 months, transplanted A. sarmentosa would be indistinguishable from the same species naturally growing in the transplant site, both in terms of sulphur concentration and isotopic composition.     

Emission of volatile organic sulfur compounds (VOSCs) during aerobic decomposition of food wastes

Food wastes collected from typical urban residential communities were investigated for the emission of volatile organic sulfur compounds (VOSCs) during laboratory-controlled aerobic decomposition in an incubator for a period of 41 days. Emission of VOSCs from the food wastes totaled 409.9 mg kg^?1 (dry weight), and dimethyl disulfide (DMDS), dimethyl sulfide (DMS), methyl 2-propenyl disulfide, carbonyl sulfide and methyl 1-propenyl sulfide were the five most abundant VOSCs, with shares of 75.5%, 13.5%, 4.8%, 2.2% and 1.3% in total 15 VOSCs released, respectively. The emission fluxes of major VOSCs were very low at the beginning (day 0). They peaked at days 2–4 and then decreased sharply until they leveled off after 10 days of incubation. For most VOSCs, over 95% of their emission occurred in the first 10 days. The time series of VOSC emission fluxes, as well as their significant correlation with internal food waste temperature (p < 0.05) during incubation, suggested that production of VOSC species was induced mainly by microbial activities during the aerobic decomposition instead of as inherited. Released VOSCs accounted for 5.3% of sulfur content in the food wastes, implying that during aerobic decomposition considerable portion of sulfur in food wastes would be released into the atmosphere as VOSCs, primarily as DMDS, which is very short-lived in the atmosphere and thus usually less considered in the sources and sinks of reduced sulfur gases.     

Chemisorption of hydrogen sulphide and methanethiol by light expanded clay aggregates (Leca)

Removal of volatile sulphur compounds from livestock waste air by biological air filtration may be enhanced by application of packing materials with reactive properties. In this study, light expanded clay aggregates (Leca®) was tested with respect to sorption and potential chemical degradation of H₂S, Methanethiol (MT) and Dimethyl sulphide (DMS). Leca was selected due to its content of minerals, including iron, and due to its high specific surface area. The performance of Leca was evaluated based on breakthrough curves and by comparing the difference between the inlet and outlet gas concentrations. Whereas DMS did not appear to be removed by Leca, both H₂S and MT were removed with variable efficiency depending on the specific conditions. Dimethyl disulphide (DMDS) and dimethyl trisulphide (DMTS) were demonstrated to be produced during the degradation process in relatively high yields. A comparison between ambient air and nitrogen gas conditions showed that the chemisorption of H₂S and MT did not necessarily need oxygen to be present. X-ray analysis of Leca showed an abundance of Fe₂O₃. It is therefore hypothesized that Fe₂O₃ in Leca can remove H₂S and MT by chemisorption. Both air velocity and moisture content clearly affected the capacity of Leca for removal of H₂S and MT. Lower removal is seen at higher air velocities, whereas higher moisture content enhances removal. However, chemisorption of MT by Leca appears to be limited above a threshold moisture level. Potential reaction mechanisms are discussed in relation to the observed effects. The results implicate that Leca can be used as a filter material with reactive properties provided that moisture content is controlled and that an adequate air velocity is used.     

Assessing the suitability of Norway spruce wood as an environmental archive for sulphur

The aim of this study was to assess the suitability of Norway spruces (Picea abies L. Karst.) as an environmental archive for sulphur. For this purpose spruce trees were sampled in two distinct regions of Switzerland: the Alps and the Swiss Plateau, which differ significantly with respect to S immission. Wood samples were measured using two methods: LASER Ablation high resolution inductively coupled plasma mass spectrometry (LA-HR-ICP-MS) and inductively coupled plasma optical emission spectrometry (ICP-OES) after acid digestion. Independently corroborated by previous measurements of sulphur in peat bogs, the rise and fall of sulphur dioxide pollution in Switzerland appears to be reflected in spruce wood sulphur content. While the wood sulphur content profile of trees sampled in the Alps is relatively flat, the profiles of trees located on the Swiss Plateau display a characteristic sulphur peak. This corresponds to air pollution data in the different regions and indicates that the trees reacted on the changing S supply and recorded a pollution signal in the wood.     

Oxidation of SO2 in rainwater and its role in acid rain chemistry

A limited survey of rainwater composition covering 80 precipitation events was carried out to establish the levels of soluble metal ions which may influence the oxidation rate of SO₂ in the aqueous phase. For 40 of the samples sodium sulphite was added at low concentrations and the rate of oxidation of S(IV) to S(VI) established. The first order rate constant k_s(IV) was found to vary over three orders of magnitude, from 10⁻⁵ to 10⁻² s⁻¹. pH and iron concentrations were found to be the most important factors affecting the rate. There was poor correlation between the rate of oxidation and the manganese, copper and zinc concentrations. The absolute values of the rate constants are lower than those used in recent modelling studies of atmospheric droplets and the importance of iron relative to manganese also differs from earlier studies.     

Active biomonitoring of airborne fluoride near an HF producing factory using standardised grass cultures

In order to study the pollution gradient in the vicinity of an HF producing factory, a biomonitoring programme was performed employing VDI standardised grass cultures. Specimen plants of Lolium multiflorum cv. Lema were exposed at 11 sites over five monthly periods and the biomass produced was used for subsequent F-analyses. Meteorological data from the study region confirmed that wind direction accounted for changes in the pollution pattern over periods of time. Fluoride concentrations in the grass cultures, however, were unrelated to temperature and precipitation sums during the exposures. The biomass production of the grass cultures proved to be unrelated to these parameters as well but, with the enhanced growth of the plants, the fluoride concentrations were lower due to the dilution of the element with higher biomass accumulation. Because the contribution of particulate fluoride was unknown, both the washed grass cultures and the washing water were analysed in order to determine the amount of external fluoride. Washing reduced the fluoride concentrations by 22% on average, indicating that most of the element was internal fluoride stemming from stomatal uptake. Larger amounts of fluoride, however, could be washed off from grass cultures exposed at sites close to the factory indicating that dust emissions played a greater role at these locations. Because particulate emissions were supposed to arise from CaF₂ and the waste-product anhydrite, grass cultures were also analysed for calcium and sulphur. While calcium concentrations were generally high but unrelated to fluoride, sulphur concentrations showed a slight relationship to the F-concentrations determined in the unwashed plants. Latter findings indicate the co-deposition of the two elements as surface bound, external loads, but bioindication could not clarify to what extent both elements were partitioned in the gas-to-particle phase. We therefore recommend using the grass culture method in air quality programmes to identify any exceedances of European feeding stuff standards in the vicinity of large emitters.     

The effect of variable sub-grid deposition factors on the results of the lagrangian long-range transport model of EMEP

The EMEP/MSC-W routine model for long-range atmospheric transport of sulphur and nitrogen includes a correction for the unresolved sub-grid-scale deposition in emission grid-squares. A constant fraction of the emissions is assumed to be directly deposited inside the first grid-square. Experiments have been performed to estimate the effects of using factors which vary with emission height and meteorological conditions. Results indicate that the constant local deposition factor used for sulphur dioxide in the routine model, is an overestimate, in particular for high-level emission sources. The change in annual deposition caused by the new local deposition factor for sulphur dioxide, is most clearly seen as a decreased deposition in the grid-squares with the largest emissions such as due for the former German Democratic Republic. The amount of this decrease strongly depends on the source height distribution. With the presently available emission data, a decrease of maximum 36% can be expected in individual grid squares. In grid-squares dominated by transboundary deposition, the increase is typically lower than 10%.     

Identification of degradation products of thiram in water, soil and plants using LC-MS technique

In order to evaluate the deleterious effects of exposure to pesticides on a target population, a comprehensive study on their degradation in the various segments of ecosystem under varying environmental conditions is needed. In view of this, a study has been carried out on the metabolic pathways of thiram, a dithiocarbamate fungicide, in a variety of matrices namely water and soil under controlled conditions and plants in field conditions. The identification of degradation products was carried out in samples collected at various time points using LC-MS. The degradation products identified can be rationalized as originating by a variety of processes like hydrolysis, oxidation, N-dealkylation and cyclization. As a result of these processes the presence of some metabolites like dimethyl dithiocarbamate, bis(dimethyl carbamoyl) disulphide, bis(dimethyl dithiocarbamoyl) trisulphide and N-methyl-amino-dithiocarbamoyl sulphide was observed in all the cases. However, some different metabolites were observed with the change in the matrix or its characteristics such as cyclised products 2(N, N-dimethyl amino)thiazoline carboxylic acid and 2-thioxo-4-thiazolidine were observed only in plants. The investigations reflect that degradation initiates with hydrolysis, subsequently oxidation/dealkylation, followed by different types of reactions. The pathways seem to be complex and dependent on the matrices. Dimethyl dithiocarbamate and oxon metabolites, which are more toxic than parent compound, seem to persist for a longer time. Results indicate persistence vis-a-vis toxicity of pesticide and its metabolites and also provide a data bank of metabolites for forensic and epidemiological investigations.     

Effects of diesel/biodiesel blends on regulated and unregulated pollutants from a passenger vehicle operated over the European and the Athens driving cycles

This paper presents the regulated and unregulated exhaust emissions of a diesel passenger vehicle, operated with low sulphur automotive diesel and soy methyl ester blends. Emission and fuel consumption measurements were conducted under real driving conditions (Athens Driving Cycle, ADC) and compared with those of a modified New European Driving Cycle (NEDC) using a chassis dynamometer. A Euro II compliant diesel vehicle was used in this study, equipped with an indirect injection diesel engine, fuelled with diesel fuel and biodiesel blends at proportions of 5, 10, and 20% respectively. Unregulated emissions of 11 polycyclic aromatic hydrocarbons (PAHs), 5 nitro-PAHs, 13 carbonyl compounds (CBCs) and the soluble organic fraction (SOF) of the particulate matter were measured. Qualitative hydrocarbon analysis was also performed on the SOF. Regulated emissions of NO_x, CO, HC, CO₂, and PM were also measured over the two test cycles. It was established that some of the emissions measured over the (hot-start) NEDC differed from the real-world cycle. Significant differences were also observed in the vehicle's fuel consumption between the two test cycles. The addition of biodiesel reduced the regulated emissions of CO, HC and PM, while an increase in NO_x was observed over the ADC. Carbonyl emissions, PAHs and nitro-PAHs were reduced with the addition of biodiesel over both driving cycles.