Biodegradability of Poly (lactic acid), Preparation and Characterization of PLA/Gum Arabic Blends

In this study, the biodegradation of PLA films using microorganisms from Lake Bogoria (Kenya) were investigated. The biodegradation tests done using certain strains of thermophilic bacteria showed faster biodegradation rates and demonstrated temperature dependency. The biodegradation of the PLA films was studied using Gel Permeation Chromatography (GPC) and light microscopy. The biodegradation of PLA was demonstrated by decrease in molecular weight. The preparation and characterization of PLA/Gum Arabic blends were also investigated using DSC, TGA, TMA and NMR. In summary, the results obtained in this research show that PLA films undergo fast biodegradation using thermophiles isolated from Lake Bogoria. The PLA/GA blends studies show it is possible to prepare films of varying hydrophobic–hydrophilic properties for various applications.     

A Comparative Study Between Bio-composites Obtained with Opuntia ficus indica Cladodes and Flax Fibers

This work is aimed to study the suitability of the wooden backbone of Opuntia ficus indica cladodes as reinforcement for the production of bio-composites. The wooden backbone can be extracted from O. ficus indica cladodes, which constitute a very relevant agricultural scrap, and is characterized by a thick walled cellular structure. In view of its potential in poly-lactic acid (PLA) matrix bio-composite production, two different possible applications were examined. In the first alternative, the wooden backbone was used in replacement of flax fibers for the production of fully consolidated bio-composites. Results obtained have shown that, though being characterized by lower properties compared to those of flax fiber composites, the opuntia actually works as an efficient reinforcement for PLA/wood flour matrix, increasing the flexural strength and elongation at break. In the second alternative, the cellular structure was used for the production of a sandwich bio-composite with a PLA/wood flour skin. In this case, the very high interlaminar adhesion strength between the skin and the core was considered as an indication of the potentiality of this material for the production of high strength sandwich structures. As a confirmation of this, no interlaminar debonding was observed during short beam tests.     

Novel Biodegradable Cast Film from Cherry Tree Gum,Development, Modification and Characterization

The feasibility of sweet cherry gum as a bio-based film-forming material and effect of hydrogen peroxide as a chemical modifier investigated. The influence of film compositions (gum, glycerol) and hydrogen peroxide on the physical properties of films, including solubility in water, permeability to water vapor (WVP), mechanical properties, and transparency, thermal and microstructural properties evaluated. The results showed that WVP and thickness increased by gum and glycerol concentration, but significantly decreased by hydrogen peroxide. As expected, elongation-at-break and solubility, increased at higher concentration of glycerol but the tensile strength decreased at the same condition. The film transparency was influenced by the dry weight content and was improved by higher concentrations of hydrogen peroxide. The partial degradation of polymer chain by hydrogen peroxide was observed by FTIR analysis.     

Production and Characterization of Sodium Alginate/Gum Arabic Based Films Enriched with Syzygium cumini Seeds Extracts for Food Application

Journal of Polymers and the Environment - Biodegradable sodium alginate/gum Arabic (SG) films were obtained. The influence of Syzygium cumini seeds extract (SCSE) incorporation in SG films on...     

Optimization and Characterization of Bioactive Biocomposite Film Based on Orange Peel Incorporated with Gum Arabic Reinforced by Cr2O3 Nanoparticles

Journal of Polymers and the Environment - In this paper, the effect of adding gum arabic at levels of 0–5%, and chromium oxide nanoparticles (Cr2O3 NPs) at levels of 0–3%, were...     

The Effect of Natural Tree Gum and Environmental Condition on the Degradation of a Typical Automotive Clear Coat

In this work the effects of natural gum and its simulated compound (Arabic gum) on an acrylic based clear coat applied on different basecoats were studied. The experiments were conducted at various aging processes to simulate the real outdoor conditions by the aid of different analytical techniques including optical microscopy, scanning electron microscopy, ATR-FTIR spectroscopy, DMTA and micro hardness measurements, by which the chemical and mechanical responses of the system were investigated. Results showed that, Arabic and natural gums, due to their sticky nature in the slurry state, can strongly attach to the clear coat surface and perform a significant stress during the drying process. It was shown that, this stress was responsible for the surface cracks produced by gums, indicating a physical degradation mechanism. However, it was revealed that, biological materials could also affect the clear coat chemically. In addition, different surface cracks produced by gums on the clear coat applied on silver and black basecoats were observed and attributed to their surface chemistry and mechanical properties differences. It was shown that different amounts of aluminum flakes existed in the basecoat layers of silver and black system can effectively influence the curing degree of the clear coats applied on the se systems. This leads to different cross-linking density, toughness and surface chemistries. Therefore, different interactions of clear coats and gums, as well as stress distribution and relaxation behaviors of these two systems were found effective in such degradations. Comparison of the mechanical properties and visual effects of gums on clear coats indicated a more severe degradation under the post aging, due to the greater effect of UV light.     

A Comparative Study on the Mechanical and Physical Properties of Plywood Panels Prepared by Chitosan as Bio-Adhesive

Journal of Polymers and the Environment - This study aims to make environment-friendly plywood panels acceptable in terms of both mechanical and physical properties using chitosan as a natural...     

Effect of Manufacturing Process and Xanthan Gum Addition on the Properties of Cassava Starch Films

The objective of this work was to manufacture biodegradable films by two different processes (casting and extrusion), from different combinations of cassava starch and xanthan gum. These films were produced by casting and by extrusion from six different starch-xanthan gum combinations (0, 2, 4, 6, 8 and 10% w/w), containing glycerol as plasticizer (20% w/w) and were also characterized according to their microstructure, optical, mechanical, and barrier properties. Scanning electron microscopy of the starch-xanthan gum extruded films showed reticulated surface and smooth interior, suggesting that xanthan was driven to the surface and gelatinized starch to the interior of the films during extrusion. Films manufactured by casting were entirely homogeneous. In general, casted films presented lower opacity and water vapor permeability and higher stress at break than films manufactured by extrusion. Xanthan gum addition affected mechanical properties of starch films, improving their stress and strain at break, especially for extruded samples, but these properties did not show stability at different RH conditions.     

生物滴滤塔处理氯苯废气的工艺性能

将活性污泥培养及驯化后接种于生物滴滤塔中,挂膜启动后处理模拟氯苯废气（简称氯苯废气）,考察了生物滴滤塔在挂膜启动阶段及稳定运行阶段的性能。实验结果表明：接种41 d后生物滴滤塔成功挂膜,此时氯苯去除率稳定在90%以上;生物滴滤塔稳定运行阶段,随着进气中氯苯质量浓度由303.82 mg/m³逐渐增至1 489.05 mg/m³,氯苯去除率从85.1%降至70.1%。处理氯苯废气适宜的工艺条件为：空塔停留时间超过45 s,喷淋液流量31.8 mL/min,氯苯负荷23.97~128.01 g/（m³·h）。生物滴滤塔对喷淋液的酸性环境有较好的适应性,喷淋液pH的变化对氯苯去除率无显著影响。     

Chemical,Morphological, Thermal and Technological Properties of Acetylated White Inhambu Starch

Journal of Polymers and the Environment - Starch is the main predominant food reserve in plants. Its characteristics stand out from other carbohydrates providing it with several industrial...     

A Comparative Study of Pectin Extracted from Passion Fruit Rind Flours

Brazil is the world’s main producer of passion fruit. Previous reports show that passion fruit rinds, an industrial waste, contain large amounts of pectin. Pectin is a dietary fiber that is widely used in the food industry as a gelling agent and stabilizer. In this study, the quality and characteristics of pectin extracted from yellow passion fruit rind flour was investigated. Pectin was extracted from both commercially available and prepared passion fruit peels using nitric acid. Once extracted, the pectin was evaluated for its molecular characteristics and chemical composition as well as for the apparent and reduced viscosity of the gel. Prepared (blanched) rind flour yielded 203.4 g kg⁻¹ of pectin, which contained a uronic acid content of 681 mg g⁻¹, a degree of esterification of 80, a degree of methylation of 80, a reduced viscosity of 6.8 dL g⁻¹ and an apparent viscosity of 13.4 cP. The results suggest a clear influence of the raw material on it’s the resultant characteristics of the pectin. In addition, our results show that therheological properties and molar characteristics of pectin were negatively affected when the rind flours were subjected to high temperatures. Pectin methyl esterase activity was detected in the freeze-dried, unblanched raw material. Extensive efforts have been directed towards minimizing waste and the reported results show that high quality pectin can be obtained from passion fruit rinds, an industrial waste product of passion fruit processing.     

Comparative Study of Xylan Extracted by Sodium and Potassium Hydroxides (NaOH and KOH) from Bagasse Pulp: Characterization and Morphological Properties

Xylan is the second most abundant polysaccharide and the predominant hemicellulose component of soda bagasse pulp. The present endeavor focuses on increasing the value addition to underutilized agro-industrial residue such as bagasse. For this purpose, xylan was isolated by two conventional alkali extraction methods i.e. NaOH and KOH. The recovery rate and sugar composition of different reaction times and alkali consumptions were monitored with advanced method such as High Performance Liquid Chromatography (HPLC). The Fourier Transform Infrared Spectroscopy (FTIR) and Wide Angle X-ray spectroscopy (WAXS) were respectively employed to characterize the functional groups and Crystallinity Index (CrI) changes during the extraction process. It was explored that highest xylan recovery rates were obtained with 6% of NaOH at 120 min and 6% KOH at 45 min. The xylan morphology via WAXS was found that its structure to be amorphous. HPLC results also showed KOH had higher effectiveness than NaOH in terms of extracted xylan purity. Highest XGRs (Xylose to Glucose Ratios) were also achieved by KOH processes. Hence, this study contributes to the adequate utilization of agricultural residues, with promising potential for applications in the production of certain novel materials and chemical conversion industries.     

Effect of Magnesium Oxide Loading on Adhesion Properties of ENR 25/NBR Blend Adhesives in the Presence of Petro Resin and Gum Rosin Tackifiers

The adhesion properties of magnesium oxide filled epoxidized natural rubber (ENR 25)/acrylonitrile-butadiene rubber (NBR) blend adhesives were studied using petro resin and gum rosin as tackifiers. Toluene was used as the solvent throughout the experiment. Five different loadings, i.e. 10, 20, 30, 40 and 50 phr magnesium oxide was used in the adhesive formulation. The SHEEN hand coater was used to coat the adhesive on polyethylene terephthalate at 30 and 120 µm coating thickness. The tack, peel strength and shear strength were determined by a Lloyd adhesion tester operating at 30 cm min^?1. Results shows that all the adhesion properties of the ENR 25/NBR adhesives show a maximum value at 10 phr filler loading. Loop tack and peel strength pass through a maximum, an observation which is associated to the optimum wettability of adhesive on the substrate. For the shear test, maximum shear strength occurs due to the optimum cohesive strength of the adhesive. Results also show that all petro resin based adhesives have higher adhesion properties than gum rosin based adhesive. In all cases, the adhesion properties of adhesives also increase with increasing coating thickness.     

A Comparative Study of Doum fiber and Shrimp Chitin Based Reinforced Low Density Polyethylene Biocomposites

The aim of this paper was to study the effects of reinforcing low density polyethylene (LDPE) by using bio-fillers (Doum cellulose or Shrimp chitin) on the mechanical properties. Both, Doum cellulose extracted frsom Doum leaves and Shrimp chitin extracted from shrimp co-products were compounded with LPDE without and with compatibilizer. The biocomposites were prepared by melt blending in a twin-screw extruder. Torsion and flexural tests were performed to investigate the impact of each reinforcement on the biocomposite mechanical properties. The SEM was carried out to study the filler/polymer interface adhesion. The present study has demonstrated that Doum fibers and shrimp chitin succeed in improving the mechanical properties of LPDE bio-composites. The results also showed that the use of maleic anhydride-grafted polyethylene as a compatibilizer improves filler adhesion/matrix and mechanical properties. This study exhibits that polyethylene composites based on Doum fibers or shrimp chitin can be used to replace the polyethylene materials in several fields like packaging and automotive industries.     

挥发性有机物的物化性质与活性炭饱和吸附量的相关性研究

采用kc-4．0型颗粒活性炭对甲苯、对二甲苯、乙酸甲酯、乙酸乙酯、乙醇、正丙醇进行吸附实验,研究挥发性有机物的物化性质与活性炭饱和吸附量之间的相关性。实验结果表明,活性炭对乙酸甲酯、乙醇和正丙醇的吸附性能较差,对乙酸乙酯、甲苯和对二甲苯的的吸附性能较好,饱和吸附量最大的是甲苯（达312．92mg／g）,饱和吸附量最小的是乙酸甲酯（为224．93mg／g）。6种挥发性有机物的吸附等温线用Langmuir方程进行拟合,效果良好。挥发性有机物的比蒸发速度、饱和蒸气压和电离势能与活性炭饱和吸附量具有显著的相关性。比蒸发速度越快、饱和蒸气压越高或电离势能越大,活性炭饱和吸附量越小。     

Performance of Trickle-Bed Air Biofilter: A Comparative Study of a Hydrophilic and a Hydrophobic Voc

Two lab-scale trickle-bed air biofilters were operated for investigating the difference in performance between a hydrophilic and a hydrophobic volatile organic compound (VOC). Methyl isobutyl ketone (MIBK) and styrene were selected as a model hydrophilic and hydrophobic VOCs, respectively. Effects of loading rates, biofilter re-acclimation, removal profile along biofilter depth, nitrogen consumption, and CO₂ production were compared under three operating conditions, namely, backwashing and two non-use periods (starvation and stagnant). Consistent over 99% removal efficiency up to loading rates of 3.26 kg COD/m³-day was obtained for the MIBK biofilter at 0.76 min empty bed retention time (EBRT) and 1.5 L/d nutrient flow. A similar performance for the styrene biofilter was obtained for loading rates up to 1.9kg COD/m³-day at 2.02 min EBRT and 2.4 L/d nutrient flow. The MIBK biofilter required only an initial acclimation period of 16 days while styrene biofilter required 46 days. Non-use periods can be used as another means of biomass control for both biofilters when the employed loading rate did not exceed 1.27 and 2.17 kg COD/m³-day for styrene and MIBK biofilters, respectively. The re-acclimation of both biofilter was delayed with increase of loading rate. MIBK biofilter re-acclimated in 90 min, while styrene biofilter re-acclimated in more than 600 min. Under similar loading rates, MIBK biofilter utilized less biofilter depth than styrene biofilter. Nitrogen consumption behaviors were apparently different between the two biofilters. Styrene biofilter had higher CO₂ production than MIBK biofilter and its CO₂ production was closely related to the theoretical complete chemical oxidation.     

Comparative Biodegradation Study of Starch- and Polylactic Acid-Based Materials

The degradation of starch- and polylactic acid-based plastic films by microorganisms extracted from compost was studied in a liquid medium. The various degradation products produced were measured throughout the duration of the experiment, and total carbon balances were estimated. For an easily biodegradable material, the evolution of the way carbon repartitioned between different degradation products was quite similar whatever the experimental condition or the type of substrate. On the other hand, for a resistant material exposed to these microorganisms, the nature of the biodegradation depended strongly on the experimental conditions. In the latter case, a differential scanning calorimetry analysis confirmed the importance of the applied norm on the state of the residual material. The consequences for improved methods of estimation of biodegradability of these materials are discussed.     

Cotton Fibre-reinforced Thermosets Versus Ramie Composites: A Comparative Study using Petrochemical- and Agro-based Resins

Natural fibres offer an interesting alternative to petrochemical products. Reclaimed cotton is mainly used as a low cost fibre to “fill” composites used as interior parts in the automotive industry. Mechanical requirements of such composites are low and the potential of the cotton-fibre to reinforce plastics is not used adequately. This paper gives background information and discusses the use of the cotton fibres in composites compared to ramie fibres. In this study the fibre strength was tested with a Dia-Stron device, fineness was tested with Fibreshape. A roller card is well suited to process fibres to a multi layer web. Cotton and ramie fibres were embedded in epoxy resin and a bio-based resin PTP^®. The composites were tested for impact and tensile properties. The results show that mechanical properties of the composites are strongly influenced by fibre properties. The data and results demonstrate the important role force-elongation characteristics of fibre play in optimising the properties of natural fibre composites. Cotton with its morphological and mechanical properties can play a more crucial role to optimise products with a view to improve the impact properties.     

A Study of Physicomechanical and Morphological Properties of Starch/Poly(vinylalcohol) Based Films

Starch/Poly(vinylalcohol) blends in two different ratios (60:40 and 50:50) were prepared with glycerol as a plasticizer. Films were cast by a solution casting method. One set of films were filled with 10 wt% of unmodified bentonite clay and another set of films were crosslinked with epichlorohydrin in an alkaline medium. The prepared film samples were subjected to X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), mechanical characterization and scanning electron microscope (SEM). Significant changes in the tensile properties were observed depending on the different chemical constituents of the films. The presence of clay and crosslinking with epichlorohydrin were both found to have considerable effect on the morphology and mechanical property of the films. The SEM investigations, XRD analysis and FTIR studies revealed the interaction between the various chemical components of the films.