Economic,ecological, and health aspects of β-diketonate application in the process of water purification

Environmental Science and Pollution Research - Water pollution is a constant challenge for humanity. Sustainable economic development and environmental protection through a green economy structure...     

Occurrence, distribution, and ecological risk assessment of DDTs and heavy metals in surface sediments from Lake Awassa—Ethiopian Rift Valley Lake

Dichlorodiphenyltrichloroethanes (DDTs) and heavy metals are ubiquitous contaminants with high bioaccumulation and persistence in the environment, which can have adverse effects on humans and animals. Although applications of DDTs have been banned in many countries, developing countries like Ethiopia are still using these for agricultural and medicinal purposes. In addition, heavy metals are naturally present in the aquatic environment and distributed globally. In this study, the occurrence, distribution, and ecological risk of DDTs and heavy metals in surface sediments from one of the Ethiopian rift valley lakes were studied. Twenty-five surface sediment samples from Lake Awassa, Ethiopia were collected and analyzed for DDTs and heavy metals. Results showed that concentrations of total DDTs ranged from 3.64 to 40.2 ng/g dry weight. High levels of DDTs were observed in the vicinity of inflow river side and coastal areas with agricultural activities. The heavy metals content were followed the order Zn?>?Ni?>?Pb?>?Cu?>?Cr?>?Co?>?As?>?Cd?>?Hg. Correlation analysis and principal components analysis demonstrated that heavy metals were originated from both natural and anthropogenic inputs. The levels of DDE and DDD in surface sediments exceeded the sediment quality guideline values, indicating that adverse effects may occur to the lake. A method based on toxic-response factor for heavy metals revealed that the calculated potential ecological risk indices showed low ecological risk for the water body.     

Deciphering the impact of novel coronavirus pandemic on agricultural sustainability,food security,and socio-economic sectors—a review

Environmental Science and Pollution Research - The Spanish flu, Asian flu, Hong Kong flu, HIV/AIDS, SARS, Ebola, and Swine flu, among others, have had a significant impact on agriculture,...     

Green finance,technological progress,and ecological performance—evidence from 30 Provinces in China

The interaction between green finance and other factors, such as ecological environment, has been a research hotspot nowadays. Especially, the reasonable guiding of capital into energy conservation and environmental protection industries would greatly affect those factors, so as to the relation between them. This paper aimed to analyze the relationships between green finance, technological progress, and ecological performance quantitatively. The entropy method was used to respectively construct the system of index for green finance and technological progress, and index for ecological performance was measured by the super-SBM model. The panel vector autoregressive (PVAR) model was selected to empirically analyze dynamic relationships based on datasets from 30 provinces in China during 2008–2019 period. The results told that (1) from 2008 to 2019, China’s overall level of green finance, technological progress and ecological performance increased to varying degrees. Spatially, the areas with high-developed green finance greatly coincided with those such as large cities or the eastern coast that had good financial development. The distribution of technological progress index were similar, except some underdeveloped areas with relatively advanced scientific research institutes. The ecological performance, however, was high in the South and low in the north. (2) In the lag for 3 years, the influence of green finance on ecological performance in different regions was all positive for that all the coefficient symbols that passed the significance test were above 0, while that on technological progress was negative first and then positive. And the effects of technological progress on ecological performance were positive in ecological regions and negative in low ecological regions (0.0893 and -0.1211 in the case of three-stage lag respectively). (3) The contribution of green finance to ecological performance was high according to the results of variance decomposition, maintained at about 30%, and that of technological progress increased year by year (from 0.000 to 0.039). Therefore, we proposed to strengthen the development of green finance in underdeveloped regions. The emphasis should be laid on the researches and applications of green technology, the formulation of financing policies in innovation compensation and the establishment of a dynamic monitoring system for the ecological environment.

     

Efficient and resilient governance of social–ecological systems

New institutions are critically needed to improve the resilience of social–ecological systems globally. Watershed management offers an important model due to its ability to govern mixed-ownership landscapes through common property regimes, translating national goals into local action. Here, I assess the efficacy of state watershed management institutions in the Pacific Northwest, based on their ability to support local watershed groups. I use document analysis to describe and compare state institutions in Washington, Oregon, Idaho, and California. Results indicate that state institutional efficiency and resilience are the key factors determining watershed group activity and stability. The primary drivers of institutional efficiency and resilience were institutional unification, robust funding portfolios, low agency conflict, and strong support for economic multiplier effects, creative partnerships, and scholarly research. My findings elucidate the critical role of institutional efficiency and resilience in governing dynamic and complex social–ecological systems, enabling the flexibility to address emergent transformations.     

The Berlin smog project—Description and summary of results

The composition of ambient air pollution, emphasising the ambient particulate matter, has been investigated for 14 wintertime smog periods (SO₂ and/or suspended particulate concentrations exceeding 400 μg m⁻³) in Berlin (West). The total aerosol mass concentration, the SO₂, CO, NO and NO₂ and pertinent meteorological parameters were measured. For chemical characterization the aerosol was collected by hi-volume, low-volume samplers and cascade impactors. The samples were analysed for the metals Pb, Cd, Mn, Ni; the water soluble ions: NH₄⁺, SO₄²⁻, NO₃⁻; and the PAH's: Fl, Py, Per, BaP, BghiP and Cor. The aerosol size distribution (0,01 < d_p < 20 μm) was measured by a combination of electrical and optical analysers with a time resolution of 10 min.The smog periods lasted from 6 to 100 h and occured during anticyclonic conditions with restricted vertical mixing and low to moderate wind velocities. The smog producing pollutants originated either in the city of Berlin or in the industrial regions 100–200 km away.Ambient air quality standards were exceeded by SO₂ (highest 24-h concentration: 760 μg m⁻³), NO_x (320), TSP (930) and SO₄²⁻ (190). BaP levels of up to 92 μg m⁻³ were measured. The total sulfate level increases with the SO₂ concentration and exceeds 100 μg m⁻³ for SO₂ levels above 600 μg m⁻³. In 40% of all cases the aerosol sulfate seems to be more acidic than (NH₄)HSO₄. The secondary aerosol fraction, i.e. the sum of SO₄²⁻, NH₄⁺ and NO₂⁻ ranges from 23 up to 65% of TSP and is related to the age of the pollutants.The composition of the pollutants reflects the different emission patterns of the various source regions and chemical conversions during the trip from the sources to the measuring station. Therefore, the patterns of the composition of the pollutants provide a means to apportion the pollutants among contributing source regions. Thus, it seems possible to develop a scheme to determine during an ongoing smog condition the major contributing source region on the basis of real time measurements of selected physical and chemical parameters of ambient pollutants.     

Vertical and horizontal distribution,source identification,ecological and toxic risk assessment of heavy metals in sediments of Lake Aygır,Kars, Turkey

Surface and core sediment samples were collected from Lake Ayg?r, Turkey, to determine heavy metal distribution, probable sources and potential ecological and toxic risks for the lake. Heavy metals, total sulfur, total phosphate, total organic carbon, chlorophyll degradation products, and CaCO₃ content were established. The enrichment factor, PLI, potential ecological risk index, and toxic risk index were calculated. Zn was determined to have the highest accumulation in surface sediment, followed by Cr, Pb, and Cd, respectively. Cd was the only element that exceeded the critical value of 40 and posed a moderate potential ecological risk. According to TRI, no ecotoxic risk was found. It is thought that local fossil fuel consumption is responsible for the accumulation of heavy metals since there is a lack of urbanization, industrialization, and agricultural activities around the lake.     

The use of vegetation,bees, and snails as important tools for the biomonitoring of atmospheric pollution—a review

The continuous discharge of diverse chemical products in the environment is nowadays of great concern to the whole world as some of them persist in the environment leading to serious diseases. Several sampling techniques have been used for the characterization of this chemical pollution, although biomonitoring using natural samplers has recently become the technique of choice in this field due to its efficiency, specificity, and low cost. In fact, several living organisms known as biomonitors could accumulate the well-known persistent environmental pollutants allowing their monitoring in the environment. In this work, a review on environmental biomonitoring is presented. The main sampling techniques used for monitoring environmental pollutants are first reported, followed by an overview on well-known natural species used as passive samplers and known as biomonitors. These species include conifer needles, lichen, mosses, bees and their byproducts, and snails, and were widely used in recent research as reliable monitors for environmental pollution.

     

Characteristics of dissolved organic matter in surface water and sediment and its ecological indication in a typical mining-affected river—Le’an River,China

Environmental Science and Pollution Research - Dissolved organic matter (DOM) plays an important role in the cycling and toxicity of heavy metals in aquatic systems. However, most studies have...     

Uncertainty of pesticides in foodstuffs,associated environmental and health risks to humans—a critical case of Bangladesh with respect to global food policy

Environmental Science and Pollution Research - The uncertain fate and transport pathways of applied pesticides are the key hidden threats with respect to the safety and quality evaluation of...     

The fate of secondary metabolites in plants growing on Cd-, As-, and Pb-contaminated soils—a comprehensive review

Environmental Science and Pollution Research - The study used scattered literature to summarize the effects of excess Cd, As, and Pb from contaminated soils on plant secondary metabolites/bioactive...     

Boiler Briquette Coal versus Raw Coal: Part II—Energy,Greenhouse Gas,and Air Quality Implications

ABSTRACT

The objective of this paper is to conduct an integrated analysis of the energy, greenhouse gas, and air quality impacts of a new type of boiler briquette coal (BB-coal) in contrast to those of the raw coal from which the BB-coal was formulated (R-coal). The analysis is based on the source emissions data and other relevant data collected in the present study and employs approaches including the construction of carbon, energy, and sulfur balances. The results show that replacing R-coal with BB-coal as the fuel for boilers such as the one tested would have multiple benefits, including a 37% increase in boiler thermal efficiency, a 25% reduction in fuel demand, a 26% reduction in CO₂ emission, a 17% reduction in CO emission, a 63% reduction in SO₂ emission, a 97% reduction in fly ash and fly ash carbon emission, a 22% reduction in PM_2.5 mass emission, and a 30% reduction in total emission of five toxic hazardous air pollutant (HAP) metals contained in PM₁₀. These benefits can be achieved with no changes in boiler hardware and with a relatively small amount of tradeoffs: a 30% increase in PM₁₀ mass emission and a 9–16% increase in fuel cost.     

Industrial transformation and shrimp aquaculture in Thailand and Vietnam: pathways to ecological,social, and economic sustainability?

Shrimp aquaculture in Vietnam is in the process of being transformed into a major industry around the intensification of the production system. The experiences of other countries in the region, especially in Thailand where high input production systems dominate, suggests that now is a critical time for intervention to redirect industry into pathways that are more sustainable ecologically, socially, and economically. In Thailand, years of experience with intensified systems and a complex industrial organization has not led to sustainable solutions. The challenge here is for society to regain control and then to redirect the transformation along more efficient and benign pathways. Our analyses suggest that current pathways in both countries are unlikely to lead to a sustainable industry. A complete transformation of the way shrimp are grown, fed, processed, distributed, and regulated is needed.     

Toxicity, dioxin-like activities, and endocrine effects of DDT metabolites—DDA, DDMU, DDMS, and DDCN

Background, aim, and scope  

2,2-bis(chlorophenyl)-1,1,1-trichloroethane (DDT) metabolites, other than those routinely measured [i.e., 2,2-bis(chlorophenyl)-1,1-dichloroethylene (DDE) and 2,2-bis(chlorophenyl)-1,1-dichloroethane (DDD)], have recently been detected in elevated concentrations not only in the surface water of Teltow Canal, Berlin, but also in sediment samples from Elbe tributaries (e.g., Mulde and Havel/Spree). This was paralleled by recent reports that multiple other metabolites could emerge from the degradation of parent DDT by naturally occurring organisms or by interaction with some heavy metals. Nevertheless, only very few data on the biological activities of these metabolites are available to date. The objective of this communication is to evaluate, for the first time, the cytotoxicity, dioxin-like activity, and estrogenicity of the least-studied DDT metabolites.     

Air–land exchanges of CO2, CH4 and N2O measured by FTIR spectrometry and micrometeorological techniques

Micrometeorological flux-gradient and nocturnal boundary layer methods were combined with Fourier transform infrared (FTIR) spectroscopy for high-precision trace gas analysis to measure fluxes of the trace gases CO₂, CH₄ and N₂O between agricultural fields and the atmosphere. The FTIR measurements were fully automated and routinely obtained a precision of 0.1–0.2% for several weeks during a measurement campaign in October 1995. In flux-gradient measurements, vertical profiles of the trace gases were measured every 30 min from the ground to 22 m. When combined with independent micrometeorological measurements of water vapour fluxes, trace gas fluxes from the underlying surface could be determined. In the nocturnal boundary layer method the rate of change in mass storage in the 0–22 m layer was combined with fluxes measured at 22 m to estimate surface fluxes. Daytime fluxes for CO₂ were −0.78±0.40 (1σ) mg CO₂ m⁻² s⁻¹. Daytime fluxes of N₂O and CH₄ were very small and difficult to measure reliably using the flux-gradient technique, despite the high precision of the concentration measurements. Mean daytime flux for N₂O was 17±48 ng N m⁻² s⁻¹, while the corresponding flux for CH₄ was 47±410 ng CH₄ m⁻² s⁻¹. The mean nighttime flux of CO₂ estimated using the nocturnal boundary layer method was +0.15±0.05 mg CO₂ m⁻² s⁻¹, in good agreement with chamber measurements of respiration rates. Nighttime fluxes of CH₄ and N₂O from the nocturnal boundary layer method were 109±69 ng CH₄ m⁻² s⁻¹ and 2±3.2 ng N m⁻² s⁻¹, respectively, in good agreement with chamber measurements and inventory estimates based on the sheep and cattle stocking rates in the region. The suitability of FTIR-based methods for long term monitoring of spatially and temporally averaged flux measurements is discussed.     

Source separation of municipal solid waste: The effects of different separation methods and citizens’ inclination—case study of Changsha,China

A case study on the source separation of municipal solid waste (MSW) was performed in Changsha, the capital city of Hunan Province, China. The objective of this study is to analyze the effects of different separation methods and compare their effects with citizens’ attitudes and inclination. An effect evaluation method based on accuracy rate and miscellany rate was proposed to study the performance of different separation methods. A large-scale questionnaire survey was conducted to determine citizens’ attitudes and inclination toward source separation. Survey result shows that the vast majority of respondents hold consciously positive attitudes toward participation in source separation. Moreover, the respondents ignore the operability of separation methods and would rather choose the complex separation method involving four or more subclassed categories. For the effects of separation methods, the site experiment result demonstrates that the relatively simple separation method involving two categories (food waste and other waste) achieves the best effect with the highest accuracy rate (83.1%) and the lowest miscellany rate (16.9%) among the proposed experimental alternatives. The outcome reflects the inconsistency between people’s environmental awareness and behavior. Such inconsistency and conflict may be attributed to the lack of environmental knowledge. Environmental education is assumed to be a fundamental solution to improve the effect of source separation of MSW in Changsha. Important management tips on source separation, including the reformation of the current pay-as-you-throw (PAYT) system, are presented in this work.

Implications: A case study on the source separation of municipal solid waste was performed in Changsha. An effect evaluation method based on accuracy rate and miscellany rate was proposed to study the performance of different separation methods. The site experiment result demonstrates that the two-category (food waste and other waste) method achieves the best effect. The inconsistency between people’s inclination and the effect of source separation exists. The proposed method can be expanded to other cities to determine the most effective separation method during planning stages or to evaluate the performance of running source separation systems.