Job level risk assessment using task level ACGIH hand activity level TLV scores: a pilot study.

Existing upper extremity musculoskeletal disorder analytical tools are primarily intended for single or mono-task jobs. However, many jobs contain more than 1 task and some include job rotation. This case/control study investigates methods of modifying an existing tool, the American Conference of Governmental Industrial Hygienists (ACGIH) Hand Activity Level (HAL) Threshold Limit Value (TLV), to assess the upper extremity risk of multi-task jobs. Various methods of combining the task differences and ratios into a job level assessment were explored. Two methods returned significant odds ratios, (p < .05) of 18.0 (95% CI 1.8-172) and 12.0 (95% CI 1.2-120). These results indicate that a modified ACGIH HAL TLV may provide insight into the work-related risk of multi-task jobs. Further research is needed to optimize this process.     

Integrating major accidents hazard into occupational risk assessment: An index approach

Major Accident Hazard (MAH) and Occupational Safety and Health (OSH) are two separated topics in both industrial practice and legislation; recently, interest is increasing toward an integrated risk assessment mainly forced by the tendency to a more efficient safety management system. The present study proposes a semi-quantitative approach to integrate MAH in OSH risk assessment. The two risk types are characterized by opposite features: the OSH analysis is usually task-based and focused on job profiles, while the MAH analysis is space-based and focused on plant characteristics. The basic idea of the proposed approach is to merge spatial information and job profile features in order to improve OSH assessment; thus, a risk index derived by the recent standard ISO 12100 (2010) has been adapted. In detail, the proposed index combines exposure times of each worker at each plant unit – derived from the OSH analysis – with damage areas derived from MAH analysis allowing a quantitative assessment of the MAH risk level for each individual job profile. The model has been tested in a large petrochemical plant; several hypotheses have been developed in order to validate the model. Results have showed the potentiality of the proposed approach in providing a common and coherent representation of both MAH and OSH risks, according to job profiles and plant units.     

某聚氯乙烯分厂的氯乙烯职业健康风险评价

以某化工企业的聚氯乙烯分厂为研究对象,引入美国环境保护署(EPA)推荐的健康风险评价四步法,即危害鉴定、剂量-反应评价、暴露评价和风险表征,对不同作业任务(清釜、看釜、巡检和配料)工人的氯乙烯职业暴露进行健康风险评价。结果表明,从非致癌效应来看,看釜、巡检和配料岗位工人暴露于VC引起肝细胞多态性的HI值均高于安全阈值1,其中看釜工的危害指数最大,引起的不利健康效应最严重。从致癌效应来看,清釜工暴露于VC引起肝血管肉瘤的风险处于可接受水平;而看釜工患肝血管肉瘤的风险值R,达到可接受上限10-4对应的工作年限ED=1.91 a,因此,需要尽可能地采用安全防护措施减少该岗位的职业暴露。巡检和配料岗位的肝血管肉瘤风险达到可接受水平上限10-4时,对应的工作年限分别为4.36 a和9.33 a。由于健康风险评价更侧重长期暴露危害物质对人体健康的影响,即使工作场所满足国标规定的浓度阈值,仍然存在工人长期暴露于低浓度致癌物的风险。     

Pediatric pedestrian trauma study: a pilot project

OBJECTIVE: To evaluate the implementation of the WalkSafe Program, a school based educational injury prevention program for children grades Kindergarten through 5. METHODS: A randomized comparative design was used for this study. The study was conducted in two high-risk urban school districts, which were chosen based on the geographic areas with the highest pedestrian injury and fatality rates. Four elementary schools (two in each district) were identified as potential study sites. Two intervention schools, one in each school district, were randomly chosen to receive the WalkSafe program; the other two schools served as controls, and received no intervention. The data was collected within the classroom setting for both the intervention and control schools. All elementary school children were administered the same pedestrian safety questionnaire as a pre-test, post-test and at three months following the intervention. RESULTS: A total of 2300 children participated in the WalkSafe program. The intervention (I) schools showed significant improvement in post-test scores then the control (C) schools (p = 0.012), and the (I) schools were able to maintain their test scores as reflected in a three-month follow-up evaluation (p = 0.47). Grades 3-5 of the (I) schools showed significant improvement in their test scores over grades K-2 (p < 0.0001). CONCLUSION: The WalkSafe program was shown to improve the pedestrian safety knowledge of elementary school children. Future research will include implementing the WalkSafe program at each elementary school within a single high-risk district.     

The cut-off point for tympanic temperature as a heat strain index for evaluation of outdoor workers: a field study

Objectives. The aims of this study were (a) to assess the agreement coefficient between tympanic temperatures and the most popular and valid heat stress index, wet bulb globe temperature (WBGT), in outdoor environments; (b) to determine a cut-off point for tympanic temperature as a heat strain index for evaluation of outdoor workers. Methods. 1452 measurements of WBGT index and tympanic temperature were recorded for outdoor workers from nine different climatic regions. Consistency of the WBGT and tympanic temperature were tested. The cut-off point for tympanic temperature in outdoor environments regarding WBGT evaluation was suggested based on obtained sensitivity and specificity from a receiver operating characteristic curve. Results. The results showed that there were numerous situations in which WBGT exceeded the reference value, whilst the measured values of tympanic temperature rarely reached a permissible value for core temperature (38?°C). Therefore, appropriate consistency of results between the heat stress and strain indices was not achieved. Conclusion. The criterion of tympanic temperature equaling 37?°C was suggested as a cut-off point for tympanic temperature as a heat strain index for outdoor environment evaluation.     

城市公共安全风险评估与控制对策研究:以武汉市为例

为明确城市公共安全关键影响因素,解决以往研究中存在的研究区域小、影响因素单一、评估方法主观性强、对策措施缺乏针对性等问题,基于风险评估基础理论和因子分析法,构建城市公共安全风险评估指标体系和风险评估模型,并以武汉市为例进行公共安全风险评估,提出相应的风险控制对策。结果表明:构建的“灾害严重性-风险应对能力”风险评估指标体系对因子分析法具有较好的适用性,风险评估模型能够有效判别城市公共安全的关键影响因素;影响武汉市公共安全的4大关键影响因子为城市发展水平和基础设施、事故灾害、环境影响和地质灾害及其防治;2010—2017年间武汉市公共安全水平总体呈上升趋势,风险应对能力的提升对武汉市公共安全水平提升贡献较大。     

Health risk assessment of emissions from a coal-fired power plant using AERMOD modelling

Current electricity generation mix in Malaysia consists of 58% gas, 33% coal and 9% hydro. It is anticipated that by year 2019, the generation mix will be at 64% coal, 32% gas and 4% hydro. Due to the increase in coal consumption for power generation, there is a critical need to evaluate the health risks for the population living in the vicinity of a coal-fired power plant in Malaysia. To date, such study related to the plant in Malaysia has never been published. In this study, health risk assessment (HRA) for air emission from a coal-fired power plant in Malaysia was carried out. Two pollutants from the Proposed New Environmental Quality (Clean Air) Regulation 201X (Draft) (i.e. SO₂ and Hg) were assessed for non-carcinogenic health risk, and two trace elements (i.e. As and Cr) were assessed for carcinogenic health risk. Both short-term and long-term health effects were evaluated. Air dispersion modelling (AERMOD) was used to predict the ground level concentration (GLC) within 10 km radius of the emission source. Based on the HRA, different health risks were identified for short-term and long-term dispersion of the studied pollutants. The findings indicate that a detailed assessment on the short-term and long-term health effects of the emissions from coal-fired power plant in Malaysia with meteorological factor as one of the significant factors influencing the emissions level is needed.     

Job satisfaction and organizational continuance commitment: a two-wave panel study

The temporal relationship between job satisfaction and organizational continuance commitment over 13 months was examined in 295 professional employees of a British engineering company using LISREL with latent variables analysis. The cross-lagged path coefficients in the LISREL models were not significantly positive, suggesting that the relationship between these two variables was spurious and due to error variance. Test–retest coefficients for both variables were moderately positive, showing that the relative ranking of individuals on these variables was fairly stable over time.     

Upper limb load as a function of repetitive task parameters: part 2--an experimental study.

The aim of the study was to compare the theoretical indicator of upper limb load with the physiological indicator of musculoskeletal load, which is present while performing a repetitive task (a normalized electromyography [EMG] amplitude recorded from the muscles of the upper limb involved in the performed task). In an experimental study of a repetitive task, the EMG signal from 5 main muscles of the shoulder girdle, arm and forearm was registered: extensor carpi radialis longus, flexor carpi ulnaris, deltoideus anterior, biceps brachii caput breve and trapezius descendent. The results of the study showed a strong correlation between the theoretical indicator (Integrated Cycle Load) and the physiological indicator (root mean square of a normalized EMG amplitude from the 5 muscles). This proves that the developed theoretical indicator can be accepted as an indicator of upper limb musculoskeletal load during a work task.     

Delphi法职业危害风险评估模型及案例研究

为科学合理地进行建设项目职业病危害风险分类,基于系统工程及风险评估的基本原理,采用Delphi法分析和确定了影响职业病危害风险程度的因素,通过构建风险评估指标体系,建立了职业病危害影响因子赋值法(OHFA)定量化风险评估模型。根据对作业场所的危害源、本质及附加防护设施水平、人员接触机会、职业病防治管理等因子的综合分析,预测分析了研究对象的职业病危害的风险程度,为职业病危害风险辨识、风险评估、防治管理及防护设施设计等提供参考。并以某石化行业硫磺回收项目为实例进行应用与验证,得出了该项目的总体职业病危害风险度值为12,风险等级为Ⅰ级,各职业病危害因素的风险度由高到底排序为硫化氢、一氧化碳、二氧化硫、硫磺、高温,其风险分类的关键决定因素为硫化氢。实践表明该方法与专家评估结果及工程实际吻合较好,应用于职业病危害风险评估中可给出定量化的风险分类结果。     

Self-reported occupational blood exposure among paramedics in Poland: a pilot study

Introduction. Paramedics are at risk of occupational blood exposure, increased by the immediacy of provided treatment. However, the issue has not been acknowledged to date by any research in Europe. Methods. This research aimed at assessing occupational blood exposure among paramedics in Poland. Respondents represented 21 Polish medical institutions. Their participation was voluntary and anonymous. Paramedics were provided with a self-directed job-specific questionnaire adapted to Polish conditions from an original US version. Results. 118 paramedics participated in the study from institutions constituting the National Emergency Medical System in Poland; including ambulance crews, Helicopter Emergency Medical Services and emergency department employees. Occupational exposure was reported by 18.64% of respondents and the main route of exposure was needlestick events. Conclusions. There is a further need to improve education among paramedics concerning the threat of being infected with blood-borne pathogens through all existing routes. Our findings point to the problem as being hidden and considered a shameful issue.     

CFD simulation study on gas dispersion for risk assessment: A case study of sour gas well blowout

Compared with general blowout, the process of sour gas well blowout is more complex. The exchange of gas state is affected by many factors, and the consequences of the accident are serious. It is difficult to find out the rule of gas dispersion and predict the distribution of toxic gas. Fluent code was used to model the sour gas dispersion in the atmosphere after well blowout. The “12.23” sour gas well blowout, which was happened in Kai County, Chongqing, Sichuan, China, was the research background. The blowout accident model was set up to simulate the real process. Models were built based on real topography. Wind speed and atmospheric stability of the day which the accident happened were set as the operation conditions, and the composition, injection rate, and temperature of the gas at the actual time were set as the boundary conditions of numerical simulation. The analysis of gas dispersion based on simulation results conducted from two aspects, height and dispersion time. A comparison of field data with simulation data demonstrated that CFD technology can be an effective aid to describe the process of sour gas dispersion and can also predict the tendency of gas dispersion and gas distribution. Furthermore, it can provide guidance on design emergency response zone (ERZ).     

An uncertainty and sensitivity analysis of dynamic operational risk assessment model: A case study

In Dynamic Operational Risk Assessment (DORA) models, component repair time is an important parameter to characterize component state and the subsequent system-state trajectory. Specific distributions are fit to the industrial component repair time to be used as the input of Monte Carlo simulation of system-state trajectory. The objective of this study is to propose and apply statistical techniques to characterize the uncertainty and sensitivity on the distribution model selection and the associated parameters determination, in order to study how the DORA output that is the probability of operation out-of-control, can be apportioned by the distribution model selection. In this study, eight distribution fittings for each component are performed. Chi-square test, Kolmogorov–Smirnov test, and Anderson-Darling test are proposed to measure the goodness-of-fit to rank the distribution models for characterizing the component repair time distribution. Sensitivity analysis results show that the selection of distribution model among exponential distribution, gamma distribution, lognormal distribution and Weibull distribution to fit the industrial data has no significant impact on DORA results in the case study.     

Inherent risk assessment methodology in preliminary design stage: A case study for toxic release

At preliminary design stage, process designers normally lack of information on the risk level from process plant. An inherently safer process plant could be designed if the information of risk levels could be known earlier at the preliminary design stage. If the risk level could be determined, there is a possibility to eliminate or reduce the risk by applying the well-known concept: inherent safety principle. This paper presents a technique to determine the risk levels at preliminary process design stage using a 2-region risk matrix concept. A model to calculate the severity and likelihood of a toxic release accident was developed in Microsoft Excel spreadsheet. This model is integrated with process design simulator, iCON to allow for data transfer during preliminary design stage. 2-region risk matrix is proposed and used to evaluate the acceptability of the inherent risk based on the severity and likelihood rating. If the inherent risk level is unacceptable, modification for improvement can be done using the inherent safety principles. A case study has been carried out to illustrate the benefit of applying this newly developed technique. It was successfully shown that an inherently safer plant could easily be designed by applying this technique.     

几种职业健康风险评估法在采石行业的应用效果比较

比较4种职业健康风险评估模型在某采石场中应用的优缺点,探索适合采石行业职业健康风险评估的最佳方法。选取湖北鄂东某采石场为研究对象,进行现场调查和采样检测,应用4种模型进行评估分析:国际采矿与金属委员会职业健康风险评估模型(ICMM模型)判定采石场工人接触粉尘为不可容忍或者高风险水平;风险定义法(MES法)判定采石场工人接触粉尘和噪声为四级或三级风险水平;罗马尼亚职业事故和职业病风险评估方法(MLSP法)判定采石场工人接触粉尘和噪声为低风险或非常低风险水平;澳大利亚职业健康与安全风险评估管理导则(UQ法)判定采石场工人接触粉尘和噪声为高风险或中等风险水平。与有毒作业分级结果比较验证,ICMM模型、MES法、MLSP法相对一致,适合评估某一具体采石场的职业健康风险,UQ法因不考虑个体差异,更适合评估整个采石行业的职业健康风险。     

Health risk assessment of occupational exposure to a magnetic field from magnetic resonance imaging devices.

Health care staff who operate magnetic resonance imaging (MRI) devices are exposed to a static magnetic field of significant spatial heterogenity always produced by MRI magnets during the whole shift. They can also be exposed to pulses of a time-varying magnetic field (gradient field) present only during patients' examinations. The level of the workers' exposure depends both on the type of the magnet and on the ergonomic design of each MRI device. The paper presents methods used for measuring and assessing workers' exposure. It also discusses the results of inspection measurements carried out next to approximately 20 MRI devices of approximately 0.2-2.0 T. The presented characteristic and overview of the variability of workers' exposure to a variety of MRI devices supports the need for data on monitoring occupational exposure to MRI. International exposure assessment standards and guidelines (International Commission on Non-Ionizing Radiation Protection [ICNIRP], Institute of Electrical and Electronics Engineers [IEEE], American Conference of Governmental and Industrial Hygienists [ACGIH], European Commission directive), and those established in Poland are also compared.     

On the development of a new hybrid risk assessment process using occupational accidents’ data: Application on the Greek Public Electric Power Provider

The occupational accidents have a major impact upon human integrity and also bring about high costs for the social health and insurance system of a country. In addition, risk analysis is an essential process for the safety policy of a company, having as main aim the effacement of any potential of damage in a productive procedure, while the quantified risk evaluation is the most crucial part of the whole procedure of assessing hazards in the work. The main goal of this study is double: a) the development and presentation of a new hybrid risk assessment process (HRAP) and b) the application of HRAP in the Greek Public Power Corporation (PPC) (the unique electric power provider and the largest industry in Greece), by using occupational accidents that have been recorded, during the 12-year period of 1993-2004. The new process consists of four distinct phases a) the hazard sources’ identification phase, b) the risk consideration phase, c) the risk-evaluation phase, and d) the phase of the risk assessment and safety-related decision making. The results show that in some cases the risk value has been calculated in PPC to be higher than 500 (in the risk rating of 0-1000), which imposes the taking of suppressive measures for abolishing the danger source, while the fatal accident frequency rate (per 10⁸ man-hrs) is FAFR ≅ 2.4.     

Developing a new alternative risk assessment framework in the work sites by including a stochastic and a deterministic process: A case study for the Greek Public Electric Power Provider

An individual method cannot achieve the optimum risk-assessment result in the worksites, and future perspectives should focus on the parallel application of a deterministic approach with a stochastic approach. In particular, the risk analysis and assessment techniques of the deterministic (DET) approach are classified into three main categories: (a) the qualitative, (b) the quantitative, and (c) the hybrid techniques (qualitative-quantitative, semi-quantitative). Furthermore, the stochastic (STO) approach includes the classic statistical approach (CSA) and the accident forecasting modeling (AFM). The objective of this paper is triple: (a) the presentation and classification of the main risk analysis and risk assessment methods and techniques of the deterministic approach and the stochastic approach as well, (b) the development and presentation of a new alternative risk assessment framework (called as STODET) including a stochastic and a deterministic process, and (c) the application of STODET in the Greek Public Power Corporation (PPC) by using occupational accidents that have been recorded, during the 17-year period of 1993-2009. In particular, the STODET application proves that required actions (or suppressive measures) are essential and must be taken in a medium-term period (1 working year) for abolishing the hazard sources.     

Job characteristics and employee well-being: a test of Warr's Vitamin Model in health care workers using structural equation modelling

Warr's (1987) Vitamin Model was investigated in a representative sample of 1437 Dutch health care workers (i.e. nurses and nurses' aides). According to this model, it was hypothesized that three job characteristics (i.e. job demands, job autonomy, and workplace social support) are curvilinearly related with three key indicators of employee well-being (i.e. job satisfaction, job-related anxiety, and emotional exhaustion). Structural equation modelling (LISREL 8) was employed to test the comprehensive Vitamin Model. The results showed that the fit of the non-linear model is superior to that of the linear model. Except for the relationship between job autonomy and emotional exhaustion, the curvilinear relationships followed the predicted U-shaped or inverted U-shaped curvilinear pattern. Moreover, it appeared that the three job characteristics are differentially related with various indicators of employee well-being. In conclusion, this study partially supports the assertion of the Vitamin Model that non-linear relationships exist between job characteristics and employee well-being. © 1998 John Wiley & Sons, Ltd.