Simultaneous analysis of five taste and odor compounds in surface water using solid-phase extraction and gas chromatography-mass spectrometry

In this paper, a method using solid-phase extraction (SPE) and gas chromatography-mass spectrometry (GC-MS) was developed to simultaneously analyze five taste and odor compounds in surface water, i.e., 2-methylisoborneol (2-MIB), 2,4,6-trichloroanisole (TCA), 2-isopropyl-3-methoxy pyrazine (IPMP), 2-isobutyl-3-methoxy pyrazine (IBMP), and trans-1,10-dimethyl-trans-9-decalol (geosmin, GSM). The mass spectrometry was operated in selective ion monitoring (SIM) mode. Three kinds of SPE columns and three eluting solvents were compared, the C18 column was chosen as optimum SPE column, and methanol was chosen as the optimum eluting solvent. It was found that the method showed good linearity in the range of 1–200 ng·L^-1 and gave detection limits of 0.5–1.5 ng·L^-1 for individual compounds. Good recoveries (93.5%–108%) and relative standard deviations (1.58%–7.31%) were also obtained. Additionally, concentrations of these taste and odor compounds in Jinan’s surface and drinking water were analyzed by applying this method, and the results showed that GSM and 2-MIB were the dominant taste and odor compounds in Jinan’s raw water.     

Biodegradation of 2-methylisoborneol by bacteria enriched from biological activated carbon

One of the most common taste and odour compounds (TOCs) in drinking water is 2-methylisoborneol (2-MIB) which cannot be readily removed by conventional water treatments. Four bacterial strains for degrading 2-MIB were isolated from the surface of a biological activated carbon filter, and were characterized as Micrococcus spp., Flavobacterium spp., Brevibacterium spp. and Pseudomonas spp. based on 16S rRNA analysis. The removal efficiencies of 2-MIB with initial concentrations of 515 ng·L^-1 were 98.4%, 96.3%, 95.0%, and 92.8% for Micrococcus spp., Flavobacterium spp., Brevibacterium spp. and Pseudomonas spp., respectively. These removal efficiencies were slightly higher than those with initial concentration at 4.2 mg·L^-1 (86.1%, 84.4%, 86.7% and 86.0%, respectively). The kinetic model showed that biodegradation of 2-MIB at an initial dose of 4.2 mg·L^-1 was a pseudo-first-order reaction, with rate constants of 0.287, 0.277, 0.281, and 0.294 d^-1, respectively. These degraders decomposed 2-MIB to form 2-methylenebornane and 2-methyl-2-bornane as the products.     

高效液相色谱-串联质谱法同时检测水体中26种药物及个人护理品

通过优化固相萃取条件和高效液相色谱-串联质谱参数,建立了可以同时检测地表水和地下水中26种典型药物及个人护理品(pharmaceuticals and personal care products,PPCPs),包括磺胺类、大环内酯类、喹诺酮类、酰胺醇类、精神类、消炎止痛类以及个人护理品的检测方法.通过将水样pH值调节至7,利用HLB固相萃取柱对水样中PPCPs进行富集,以甲醇和含0.005%甲酸的水溶液作为正离子模式流动相,甲醇和含0.5 mmol·L^-1乙酸铵的水溶液作为负离子模式流动相进行梯度洗脱,采用多反应监测的质谱扫描模式(MRM)分析测定.26种PPCPs的检出限为0.007—1.78 ng·L^-1,定量限为0.02—5.68 ng·L^-1,回收率为52.28%—115.24%.利用该方法检测北京潮白河地表水和地下水中PPCPs的浓度,结果表明,地表水中PPCPs的含量普遍高于地下水,磺胺甲恶唑、舒必利、咖啡因、卡马西平和布洛芬在地表水和地下水中的含量相对较高,检测浓度分别高达147.83、52.48、78.35、166.58、30.63 ng·L^-1.     

Source water odor in one reservoir in hot and humid areas of southern China: occurrence,diagnosis and possible mitigation measures

Background

Identifying typical odor-causing compounds is essential for odor problem control in drinking water. In this study, aiming at a major water source reservoir in hot and humid areas in southern China, which encountered seasonable odor problems in recent years, an integrated approach including comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry (GC?×?GC–TOFMS), flavor profile analysis (FPA) and quantitative real-time polymerase chain reaction (qPCR) was adopted to investigate the odor occurrence.

Results

The results indicated that earthy–musty odor is blamed to the seasonable odor problems, and it is consistent with the complaints results from consumers. Fifty-four typical odor compounds were investigated in the reservoir and twelve were detected, of which, 2-methylisoborneol (2-MIB) was significantly increased during the odor event. Pseudanabaena sp. is the dominant species in the reservoir, which can be further represented by the number of mic gene with qPCR method (R²?=?0.746, P?<?0.001). Oxygen consumption (COD_Mn) and dissolved organic carbon (DOC) have great influence on growth of Pseudanabaena sp., and the release of 2-MIB from the Pseudanabaena sp. cells is affected by temperature and light.

Conclusion

Our findings demonstrated that 2-MIB is the odor-caused substance in the reservoir and Pseudanabaena sp. is the main 2-MIB producer, which was confirmed as a benthic filamentous algae. Due to COD_Mn and DOC have great influence on Pseudanabaena sp. growth, further measures to reduce the CODMn and DOC input should be performed. We also demonstrated that the 2-MIB release is affected by temperature and light. The risk of sudden increase of 2-MIB will be reduced by raising the depth of water in the reservoir. Our study will improve the understanding of T&O problems in this city, as well as in other hot and humid area.

     

Determination of 27 pharmaceuticals and personal care products (PPCPs) in water: The benefit of isotope dilution

• Isotope dilution method was developed for the determination of 27 PPCPs in water. • The established method was successfully applied to different types of water samples. • The correction effect of corresponding 27 ILSs over 70 d was investigated. • Benefit of isotopic dilution method was illustrated for three examples. Pharmaceuticals and personal care products (PPCPs) are a unique group of emerging and non-persistent contaminants. In this study, 27 PPCPs in various water samples were extracted by solid phase extraction (SPE), and determined by isotope dilution method using liquid chromatography coupled to tandem triple quadruple mass spectrometer (LC-MS/MS). A total of 27 isotopically labeled standards (ILSs) were applied to correct the concentration of PPCPs in spiked ultrapure water, drinking water, river, effluent and influent sewage. The corrected recoveries were 73%–122% with the relative standard deviation (RSD)<16%, except for acetaminophen. The matrix effect for all kinds of water samples was<22% and the method quantitation limits (MQLs) were 0.45–8.6 ng/L. The developed method was successfully applied on environmental water samples. The SPE extracts of spiked ultrapure water, drinking water, river and wastewater effluent were stored for 70 days, and the ILSs-corrected recoveries of 27 PPCPs were obtained to evaluate the correction ability of ILSs in the presence of variety interferences. The recoveries of 27 PPCPs over 70 days were within the scope of 72%–140% with the recovery variation<37% in all cases. The isotope dilution method seems to be of benefit when the extract has to be stored for long time before the instrument analysis.     

Kinetics of oxidation of dimethyl trisulfide by potassium permanganate in drinking water

Metabolites of algae such as geosmin, 2-methylisoborneol etc. are reported to induce pungent odors into drinking water and attract additional scientific attention. Recently, in China, taste and odor outbreaks in drinking water supply have become increasingly common. In source water affected by eutrophication, dimethyl trisulfide, speculated to be produced by decayed algae, was found to be the source of taste and odor issues and can be removed effectively by usual oxidation agents. In this experimental study, batch scale tests were carried out focusing on the removal of dimethyl trisulfide. Reaction kinetics of dimethyl trisulfide oxidized by potassium permanganate in water had been studied; influence factors such as pH, organic substrate, other existed taste, and odor contaminant in equivalent concentration were also discussed. Results showed that dimethyl trisulfide can be removed by potassium permanganate efficiently; the ratio can reach more than 70% with oxidant dosage of 4 mg·L^-1 and contact time prolonged to 120 min. The dimethyl trisulfide decomposition followed a second-order kinetics pattern with a rate constant k = 0.00213 L·(min·mg)^-1. Typically, the degradation rate of dimethyl trisulfide was increased with the increasing KMnO₄ dosage, but dramatically dropped with the increasing levels of humic acid (1.8–4.5 mg·L^-1) and other odor-causing compounds (e.g. β-cyclocitral, 0–1886.0 μg·L^-1). Solution pH (5.2–9.0) and initial dimethyl trisulfide concentration did not significantly affected the degradation. This study demonstrates that KMnO₄ oxidation is an effective option to remove dimethyl trisulfide from water.     

Trace analysis of off-flavor/odor compounds in water using liquid-liquid microextraction coupled with gas chromatography—positive chemical ionization-tandem mass spectrometry

A rapid, inexpensive and laboratory friendly method was developed for analysis of off-flavor/odor compounds in fresh and salt water using gas chromatography with chemical ionization-tandem mass spectrometry. Off-flavor/odor compounds included geosmin, 2- methylisoborneol (MIB), 2-isobutyl-3-methyoxypyrazine (IBMP), and 2-isopropyl-3-methoxypyrazine (IPMP). Using this method, a single sample can be extracted within minutes using only 1 mL of organic solvent. The ion transitions for IPMP, IBMP, MIB, and geosmin were 153>121, 167>125, 152>95, and 165>109, respectively. The linearity of this method for analyzing MIB ranged from 4 to 200 ng·L^–1, and from 0.8 to 200 ng·L^–1 for the other analytes. Method recoveries ranged from 97% to 111% and percent relative standard deviations ranged from 3% to 9%, indicating that the method is accurate, precise, and reliable.     

加速溶剂萃取-固相萃取净化-超高效液相色谱串联质谱法测定土壤中11种全氟化合物

采用超高效液相色谱-串联质谱联用法（UPLC-ESI-MS/MS）,建立了分析土壤中11种全氟化合物（PFCs）的方法.以甲醇作为萃取剂,样品经加速溶剂萃取仪（ASE）萃取,固相萃取净化后,使用UPLC-ESI-MS/MS联用仪分析样品中11种PFCs.在6 min内就可快速稳定地将所选取的11种全氟化合物分离,且最低检测浓度为0.518—3.520 pg.g-1之间,这些化合物在土壤中的平均添加回收率在71.2%—119.2%之间.应用此方法测得宜兴市水稻土样品中所选取的PFCs含量为0.006—0.780 ng.g-1之间.     

近岸海水中全氟化合物的液相色谱-离子阱质谱法测定

建立了利用高效液相色谱-电喷雾离子阱质谱(HPLC-ESI-IT-MS/MS)测定近岸海水中多种常见全氟化合物(PFCs)的分析方法.采用固相萃取法(SPE)对海水中的PFCs净化富集,用HPLC-ESI-IT-MS/MS多反应离子监测(MRM)模式对各组分(全氟己烷磺酸、全氟辛烷磺酸、全氟辛烷磺酰胺、全氟己酸、全氟庚酸、全氟辛酸、全氟壬酸、全氟癸酸、全氟十一酸、全氟十二酸)进行测定.在最佳实验条件下,采用基质匹配标准曲线法定量,以消除海水基质的影响,8种目标化合物的检出限介于0.50—1.00 ng·L-1,9种PFCs的回收率在71.0%—130.2%之间,能满足近岸海水中多种PFCs检测的要求.青岛沿岸表层海水样品测定结果显示,全部采样站点的海水样品中均检测到≥4种PFCs,说明青岛沿岸海水中已有一定程度的PFCs污染.     

An efficient resin for solid-phase extraction and determination by UPLCMS/MS of 44 pharmaceutical personal care products in environmental waters

• A hydrophilic resin (GCHM) was facile synthesis and characterized. • Average absolute recovery of GCHM (75.6%) performs better than Oasis^® HLB. • Detection limits of method (SPE-UPLC-MS/MS) ranged between 0.03 and 0.6 ng/L. • 22 PPCPs were determined in environmental waters ranging from 0.5 to 1590 ng/L. In this study, a hydrophilic resin named GCHM was fabricated based on poly(N-vinyl pyrrolidone-co-divinylbenzene), characterized, and applied as a solid-phase extraction (SPE) material. Up to 44 pharmaceuticals and personal care products (PPCPs) belonging to 10 classes were recovered in environmental water samples. Different variables affecting extraction, such as adsorbent amount, sample pH, and loading speed, were optimized. Under optimal conditions, the average absolute recovery of 44 PPCPs was 75.6% using GCHM, indicating a better performance than the commercial Oasis^® HLB. SPE with home-made hydrophilic polymeric sorbent followed by ultra-performance liquid chromatography and tandem mass spectrometry was validated, and the method achieved good linearity (r²>0.991, for all analytes). In addition, the method detection limits of target compounds ranged from 0.03 to 0.6 ng/L. The developed method was applied to determine PPCPs in 10 environmental water samples taken from the Yangtze River, Huaihe River, and Taihu Lake, 1 groundwater sample from Changzhou in Jiangsu Province, 1 wastewater sample from Xiamen and 2 seawater samples from the Jiulong River in Fujian Province, China. In these samples, 22 compounds were determined at levels ranging from 0.5 to 1590 ng/L.     

海洋沉积物中甾醇类物质的气相色谱/质谱方法分析

应用超声提取技术,结合硅胶-中性氧化铝柱层析净化分离,BSTFA+1%TMCS衍生,及气相色谱-质谱定性定量技术,建立了海洋表层沉积物中8种甾醇类化合物的定量分析方法.实验采用正交实验优化了提取过程中提取剂种类、试剂体积和超声时间,同时对比并优化了柱层析淋洗液的配比、用量以及衍生剂的用量.结果表明,50 mL二氯甲烷/甲醇(V/V,2∶1),超声40 min,超声3次,总甾醇的萃取率可达99.6%;3 g硅胶+2 g中性氧化铝层析,35 mL二氯甲烷/甲醇(V/V,9∶1)淋洗净化回收最佳;8种甾醇在0—848μg.L-1范围内有良好的线性关系;方法检测限为1.2—2.4 ng.g-1.在3种浓度水平0.05、0.1和1.0μg.g-1下,其平均回收率为76.2%—100.9%,相对标准偏差为1.0%—10.3%.应用本方法检测大连湾的3个沉积物样品,8种甾醇的含量在0.079—6.833μg.g-1范围内.本方法的灵敏度高、准确度好,适合用于沉积物样品中甾醇物质的检测要求.     

Determination of selected semi-volatile organic compounds in water using automated online solid-phase extraction with large-volume injection/gas chromatography/mass spectrometry

A rapid, sensitive, and cost-effective analytical method was developed for the analysis of selected semi-volatile organic compounds in water. The method used an automated online solid-phase extraction technique coupled with programmed-temperature vaporization large-volume injection gas chromatography/mass spectrometry. The water samples were extracted by using a fully automated mobile rack system based on x-y-z robotic techniques using syringes and disposable 96-well extraction plates. The method was validated for the analysis of 30 semivolatile analytes in drinking water, groundwater, and surface water. For a sample volume of 10 mL, the linear calibrations ranged from 0.01 or 0.05 to 2.5 ??g·L^?1, and the method detection limits were less than 0.1 ??g·L^?1. For the reagent water samples fortified at 1.0 ??g·L^?1 and 2.0 ??g·L^?1, the obtained mean absolute recoveries were 70%?C130% with relative standard deviations of less than 20% for most analytes. For the drinking water, groundwater, and surface water samples fortified at 1.0 ??g·L^?1, the obtained mean absolute recoveries were 50%?C130% with relative standard deviations of less than 20% for most analytes. The new method demonstrated three advantages: 1) no manipulation except the fortification of surrogate standards prior to extraction; 2) significant cost reduction associated with sample collection, shipping, storage, and preparation; and 3) reduced exposure to hazardous solvents and other chemicals. As a result, this new automated method can be used as an effective approach for screening and/or compliance monitoring of selected semi-volatile organic compounds in water.     

Simultaneous quantification of several classes of antibiotics in water,sediments, and fish muscles by liquid chromatography–tandem mass spectrometry

Precise and sensitive methods for the simultaneous determination of different classes of antibiotics, including sulphonamides, fluoroquinolones, macrolides, tetracyclines, and trimethoprim in surface water, sediments, and fish muscles were developed. In water samples, drugs were extracted with solid-phase extraction (SPE) by passing 1000 mL of water through hydrophilic lipophilic balanced (HLB) SPE cartridges. Sediment samples were solvent-extracted, followed by tandem SPE (strong anion exchange (SAX) + HLB) clean-ups. Fish muscles were extracted by a mixture of acetonitrile and citric buffer (80:20, v/v) solution, and cleaned by SPE. Liquid chromatography–tandem mass spectrometry (LC-MS/MS) with multiple reaction monitoring (MRM) detection was employed to quantify all compounds. The recoveries for the antibiotics in the spiked water, sediment, and fish samples were 60.2%–95.8%, 48.1%–105.3%, and 59.8%–103.4%, respectively. The methods were applied to samples taken from Dianchi Lake, China. It showed that concentrations of the detected antibiotics ranged from limits of quantification (LOQ) to 713.6 ng·L^-1 (ofloxacin) in surface water and from less than LOQ to 344.8 μg·kg^-1 (sulphamethoxazole) in sediments. The number of detected antibiotics and the overall antibiotic concentrations were higher in the urban area than the rural area, indicating the probable role of livestock and human activities as important sources of antibiotic contamination. In fish muscles, the concentration of norfloxacin was the highest (up to 38.5 μg·kg^-1), but tetracyclines and macrolides were relatively low. Results showed that the methods were rapid and sensitive, and capable of determining several classes of antibiotics from each of the water, sediment, and fish matrices in a single run.     

在线柱浓缩-液相色谱法测定水体中痕量敌草快和百草枯

采用在线柱浓缩-超快速液相色谱联用技术测定水体中痕量百草枯和敌草快.水样无需样品前处理,过滤后即可进样.采用固相萃取小柱富集待测物,以色谱梯度泵完成样品的净化后,利用阀切换技术将待测物反冲至分析柱进行分离,以二极管阵列检测器定量.方法在1.0—20.0μg.L-1范围内线性良好,百草枯和敌草快的线性相关系数分别为0.9997和0.9989.百草枯和敌草快的检出限(S/N=3)分别为0.10、0.12μg.L-1,加标回收率在96.0%—98.0%之间.用所建立的方法测定了水中痕量的百草枯与敌草快的含量,结果令人满意.     

GC-MS测定土壤中阿特拉津、六氯苯等十种农药残留

建立了气相色谱-质谱-选择离子监测(GC-MS-SIM)同时测定土壤中10种农药(三嗪类除草剂、酰胺类除草剂和有机氯农药)的多残留分析方法.样品采用正己烷/丙酮(1:1,V/V)超声提取、氟罗里硅土柱层析净化、GC-MS-SIM测定.10种农药在0.01(0.02)-1.0(2.0)mg·l~(-1)范围内线性良好,相关系数介于0.9963-0.9998之间;在10,50和250 ng·g~(-1)添加水平下,平均回收率介于81%-117%之间,相对标准偏差均小于14.4%;方法检出限达到ppb至sub-ppb级(0.1-1.3 ng·g~(-1)).将此方法应用于辽宁省不同性质土壤中70个实际土壤样品的分析,阿特拉津、乙草胺、六氯苯、丁草胺、狄氏剂和艾氏剂有检出,该法对不同性质土壤具有广泛适用性.     

饮用水中苯并（a）芘的毛细管气相色谱分析

本文叙述了应用毛细管气相色谱测定饮用水中苯并（ａ）芘含量的方法，二氯甲烷用做提取剂，萃取１Ｌ水样，提取液在微沸状态下蒸干并定容，以不分流方式注入色谱仪进样口，样品在５０Ｍ张的ＳＥ－５４毛细管色谱柱上分离，氢火焰离子化检测器检测后，进行定性定量分析，方法的检测下限达２．５ｎｇ／ｌ，不仅能满足生活饮用水，也可满足天然饮用矿泉水，湖水，河水等水体中苯并（ａ）芘的检测。     

磁性介孔硅胶萃取剂的制备及萃取性能研究

合成了C18基团修饰的磁性介孔硅胶材料,并利用该材料建立了磁性固相萃取-色谱分析方法,测定了几种环境水样中酞酸酯类(PAEs)污染物的含量.结果表明,该材料具有较大的比表面积(273 m.2g-1)和饱和磁通量(29 emu.g-1),对水样中痕量的PAEs有较强的萃取能力,而且萃取剂的磁分离特性使得萃取操作更为方便、快捷.在优化条件下,30 mg萃取剂在40 min内即可从500 mL水样中萃取痕量PAEs,回收率可达80%以上.此外,该萃取剂在处理复杂环境样品时仍能保持较强的萃取能力,环境水样中4种PAEs的检测限可达15.6—32.5 ng.L-1,加标回收率为62%—109%,相对标准偏差为2%—8%.     

沉积物中多溴联苯醚的测定

采用索氏抽提、多层硅胶氧化铝复合柱净化和GC-NCI-MS检测对沉积物中的多溴联苯醚(PB-DEs)进行定量分析,以建立沉积物中多溴联苯醚的分析方法,指示物回收率为69．1％-118．3％,绝大多数目标化合物的回收率为65％-114％,沉积物样品的平均标准偏差为12．7％。     

超高效液相色谱串联质谱法检测鱼体中的全氟化合物

采用超高效液相色谱-串联质谱联用法(UPLC-ESI-MS/MS),建立了检测1种贝类和2种鱼类的肌肉组织中11种全氟化合物(PFCs)的分析方法.采用碱液消解做为样品前处理法,选Carbon/NH2双层SPE小柱做为净化小柱,并以ACQUITY UPLC BEH C18为分析柱,甲醇和2 mmol.L-15%甲醇乙酸铵溶液为梯度淋洗液.所选定的11种全氟化合物在6 min内就可以达到良好分离,外标法定量.平均回收率在72.1%—93.6%之间,相对标准偏差在0.6%—9.5%之间,实际检出限在3.4—26.7 pg.g-1.     

固相萃取-液相色谱法测定食品废水中8种色素残留

建立了食品工业废水中8种合成色素残留的固相萃取-液相色谱测定方法.水样经固相萃取柱富集,氮吹浓缩定容后直接进样.采用C18色谱柱分离,以甲醇-乙酸铵(0.01mol·L^-1)溶液为流动相,进行梯度洗脱,最后利用二极管阵列检测器(DAD)进行可变波长分析,外标法定量.结果表明,8种合成色素在1.0—50mg·L^-1的浓度范围内线性良好,相关系数均大于0.999,定量限为1.6—2.4μg·L^-1.以实际废水样品为加标对象,分别考察了低、中、高三个浓度水平的加标回收率和精密度,平均加标回收率在82.3%—95.9%之间,精密度均小于5.45%.该方法准确可靠,灵敏度高,可用于食品工业废水中痕量色素残留的测定.