Fate of oil from two major oil spills: Role of microbial degradation in removing oil from the Amoco Cadiz and IXTOC I spills

The fate of oil was examined in intertidal sediments impacted by the Amoco Cadiz spill in Brittany, France, and in surface waters contaminated by the IXTOC I well blowout in the Bay of Campeche, Mexico. The role of microbial degradation in removing the contaminating hydrocarbons was assessed by laboratory determinations of numbers of hydrocarbon utilizing microorganisms, measurement of microbial hydrocarbon biodegradation potentials, by chemical analyses of samples incubated under controlled conditions and by examination of the evolution of the hydrocarbon mixture in field samples collected after the spill. Analyses included the use of ¹⁴C radiolabelled hydrocarbon tracers, glass capillary-gas chromatography and mass spectrometry. Numbers of hydrocarbon utilizing microorganisms were found to be elevated by several orders of magnitude in oil contaminated samples. Numbers of hydrocarbon utilizing microorganisms appear to provide a useful index of environmental hydrocarbon contamination. However, environmental constraints on microbial processes appear to be most important in determining actual rates of biodegradation rather than numbers of available hydrocarbon utilizing microorganisms. Very high rates of degradation were found in intertidal sediments impacted by the Amoco Cadiz spill. In contrast, rates of degradation in the Gulf of Mexico were found to be much lower, partly due to nutrient limitations and partly due to the formation of large masses of oil-water emulsion or mousse.     

Treatment of oily refinery wastes using a dissolved air flotation process

Refinery wastewater from Moustorod oil refinery, Cairo, Egypt, was treated by chemical coagulation. This step was followed by rapid solid-liquid separation using flotation under pressure of 4 atm. A flotation tank was designed for this purpose. Gas liquid chromatography was used for determination and identification of hydrocarbon compounds in refinery wastewater. The treatment technique proved to be very promising for reducing the hydrocarbon compounds, as well as other pollutants, to a very low concentration. The results obtained showed that some of the hydrocarbon compounds were completely removed.     

Impact of the Development of Hydrocarbon Deposits on Water Ecosystems of the Yamal Peninsula

Russian Journal of Ecology - Data of monitoring studies (2014–2016) on the state of hydrobionts in watercourses during the development of a hydrocarbon deposit on the Yamal Peninsula have...     

Chemical characterization of naturally weathered oil residues in arid terrestrial environment in Al-Alamein, Egypt.

The main objective of this study was to investigate compositional changes in a range of source- and weathering-dependent molecular parameters in oil residues in the arid terrestrial environment of Al-Alamein, Egypt. The results of aromatic hydrocarbon analysis demonstrated the stability of several aromatic hydrocarbon ratios in oil residues over a wide range of weathering and hydrocarbon concentrations. The ratios of C2-dibenzothiophenes/C2-phenanthrenes (C2-DBTs/C2-PHENs), C3-dibenzothiophenes/C3-phenanthrenes (C3-DBTs/C3-PHENs), C2-chrysenes/C1-chrysenes (C2-CHRYs/C1-CHRYs), and C2-dibenzothiophenes/C1-dibenzothiophenes (C2-DBTs/C1-DBTs) were nearly constant in oil residues of varying degrees of weathering. Biomarker ratios of hopanes and steranes were useful for source identification even for severely weathered oil residues. The data confirmed previous observations that C29 20S/(20S + 20R) and C29 betabeta/(betabeta+ alphaalpha) sterane epimer ratios, and C29/C30, C30 alphabeta(alphabeta + 3alpha), C31 22S/(22S + 22R) hopane ratios correlate well even after extensive weathering of spilled oils, although some exceptions were encountered for an extensively weathered surface sample. The data provided clear evidence of correlation between samples of the weathered oil residues and the possible source oil. Moreover, the results of biomarker compositions were in good agreement with weathering classification based on alkanes and aromatic hydrocarbons. In general, samples with lowest pregnane indices (PI) and tricyclic terpane indices (TriTI) showed the lowest concentrations of n-alkanes and alkylated polycyclic aromatic hydrocarbon (PAH) homologues, the highest weathering ratios (WRs), the highest values of unresolved complex mixture (UCM)/total resolved peak (TRP) ratios, and the highest ratios of C2 and C3-alkylated CHRYs to their counterparts in the PHEN and DBT series.     

Inputs and fates of petroleum hydrocarbons in a subtropical marine estuary

Inputs and fates of petroleum from a higly urbanized area to a subtropical marine estuary were investigated by measuring hydrocarbon concentrations in municipal wastewater treatment plants, urban stormwater drains, sediments, and benthic organisms in and around Tampa Bay, FL. The concentrations of petroleum hydrocarbons discharged from secondary and tertiary treatment plants in this area were lower than concentrations previously reported for other treatment plants in temperate regions. Samples collected from urban storm drains under base flow conditions were also low. The generally low levels of petroleum hydrocarbons in the sediments and organisms throughout Tampa Bay suggest that the bay is relatively pristine with respect to petroleum hydrocarbon contamination. Since it is unlikely that the anthropogenic input of hydrocarbons to this estuary is significantly lower than in other urbanized areas, we suggest that elevated annual temperatures in this subtropical system result in increased metabolic rates of microorganisms and more rapid degradation or metabolism of the petroleum hydrocarbons.     

Natural and anthropogenic hydrocarbon inputs to sediments of Patos Lagoon Estuary, Brazil

The Patos Lagoon Estuary, southern Brazil, is an area of environmental interest not only because of tourism, but also because of the presence of the second major port of Brazil, with the related industrial and shipping activities. Thus, potential hydrocarbon pollution was examined in this study. Sediment samples were collected at 10 sites in the estuary, extracted, and analyzed by GC-FID and GC-MS for composition and concentration of the following organic geochemical markers: normal and isoprenoid alkanes, petroleum biomarkers, linear alkylbenzenes (LABs), and polycyclic aromatic hydrocarbons (PAHs). The total concentrations varied from 1.1 to 129.6 microg g(-1) for aliphatic hydrocarbons, from 17.8 to 4510.6 ng g(-1) for petroleum biomarkers, from 3.2 to 1601.9 ng g(-1) for LABs, and from 37.7 to 11,779.9 ng g(-1) for PAHs. Natural hydrocarbons were mainly derived from planktonic inputs due to a usual development of blooms in the estuary. Terrestrial plant wax compounds prevailed at sites located far from Rio Grande City and subject to stronger currents. Anthropogenic hydrocarbons are related to combustion/pyrolysis processes of fossil fuel, release of unburned oil products and domestic/industrial waste outfalls. Anthropogenic hydrocarbon inputs were more apparent at sites associated with industrial discharges (petroleum distributor and refinery), shipping activities (dry docking), and sewage outfalls (sewage). The overall concentrations of anthropogenic hydrocarbons revealed moderate to high hydrocarbon pollution in the study area.     

Diesel particulate matter: Chemical and biological assays

This study involves the chemical characterization and biological assay of diesel particulate matter generated from a single-cylinder, direct-injected diesel engine. This engine was powered with a pure hydrocarbon fuel. The total extract obtained with this fuel had a positive biological activity by various biological assays, although the raw particulate matter was negative. The methodology of sampling and the assays are discussed together with the implications of the results to date.     

Drastic Reductions in Utilizable Fossil Fuel Reserves: An Environmental Imperative

We are living in a period of exponential growth of world population and energy consumption. Forecasts suggest that the atmospheric CO₂ concentration could reach 750 p.p.m. by 2100. At this level, the coral reefs and the West Antarctic Ice Sheet would be lost and thermohaline circulation in the N. Atlantic could possibly shut down. Crippling the ocean conveyor system would have a major impact on world climate and jeopardize our chances of feeding an enlarged world population. Consumption of the total global hydrocarbon reserves would increase the atmospheric CO₂ concentration to about 2200 p.p.m. We can therefore utilize less than 20% of the global hydrocarbon reserves without an accompanying massive programme for the sequestration of CO₂ if we do not wish to cross the threshold atmospheric CO₂ concentration of 750 p.p.m. and risk a major environmental catastrophe. Attention to the global CO₂ problem will be the major task of the 21st Century.     

Changes of Structural and Physicochemical Parameters of Spruce Forest Ecosystem under the Effect of Moose (Alces alces L.)

The role of moose in the dynamics of structural, physical, and chemical parameters of a forest community is considered using an example of a southern taiga wood-sorrel spruce forest. It is shown that the activities of these animals affect the vertical structure of the underbrush and understory layers, the dynamics of phytomass accumulation, and the state of the ground vegetation. Changes in the nitrogen and hydrocarbon flows through the ecosystem under the effects of moose activities are analyzed.     

Effect of heavy metals and PAH on soil assessed via dehydrogenase assay

Dehydrogenase enzyme activity (DHA) assay method using resazurin was accommodated for measuring of toxicity of compound contaminants on uncharacterized microbial communities present in any given soil. The method was used to compare the toxic effect of heavy metal and polycyclic aromatic hydrocarbon (PAH) contaminant mixture (Cr, Pb, Cu, Cd, Pyrene) on four typical Estonian soils covering a range of compositions. The method proved to be useable on all soils; the sensitivity of soil microbiology to toxic effect of contaminants was found to have a negative correlation with Ca and organic matter (OM) content and a positive correlation with amorphous phase content of soils.     

Naphthalene biodegradation kinetics in an aerobic slurry-phase bioreactor

The research was focused on the slurry-phase biodegradation of naphthalene in soil. Among ex situ techniques, the slurry phase offers the advantage of increased availability of contaminants to bacteria. From naphthalene contaminated soil, a Pseudomonas putida M8 strain capable to degrade naphthalene was selected. Experiments were performed in a stirred and oxygenated reactor. In this study, the influence of air flow rate and agitation rate on volatilisation and biodegradation of naphthalene was investigated. The hydrocarbon disappearance, the carbon dioxide production, and the ratio of total heterotrophic and naphthalene-degrading bacteria was monitored. The results obtained confirm that the selected bioremediation technology is successful in the treatment of contaminated soils.     

The co-application of earthworms (Dendrobaena veneta) and compost to increase hydrocarbon losses from diesel contaminated soils

The feasibility of using composted civic waste for the remediation of a soil contaminated with petroleum hydrocarbons (extractable petroleum hydrocarbons (EPH) 10+/-1.8 g kg(-1) and total 16 USEPA PAH 1.62+/-0.5 g kg(-1)) was assessed. The effects of compost to soil ratio, in combination with and without earthworm presence (Dendrobaena veneta), upon the loss of contaminants were determined for EPH (GC-FID) and PAH (GC-MS), respectively. Increasing the ratio of compost substrate to hydrocarbon impacted soil (1:0.5, 1:1, 1:2 and 1:4 (soil:compost wt/wt)) in the absence of earthworms resulted in significantly (p<0.05) greater losses of both EPH and SigmaPAH after an 84 d incubation period, when compared to the soil only control. Where earthworms were present without compost, EPH losses were significantly (p<0.05) enhanced in the soil only treatment (33.4+/-5.3% residual) compared to the soil only control (54.4+/-5.3% residual). However, PAH loss in the soil only treatment (with-earthworm presence) were only slightly enhanced (65.3+/-9.3% residual), with respect to the soil only control (69.2+/-6.4% residual). Synergistic benefits of both earthworm and compost presence were most significant for PAHs (p<0.05), and less so for EPH. (14)C-respirometer studies, to establish catabolic competence in terms of microbial mineralisation of key hydrocarbons, complemented the hydrocarbon analysis.     

Biodegradability of hydrocarbons in the refinery wastewater from moustorod oil refinery

The present investigation deals with the study of hydrocarbon degradation present in refinery wastewater by natural microbial flora in addition to that obtained using Ps. aeruginosa under laboratory conditions. Results indicated that Ps. aeruginosa may have a significant role in the degradation of hydrocarbons. After seven days, several of the compounds in the original wastewater were completely degraded and four compounds (n-paraffins) were partially degraded. Without Ps. aerruginosa, the same picture had been obtained after 23 days.     

Introduction of geomechanical restoration method and its implications for reservoir assessment of unconventional oil-gas resource in China

New technologies are in urgent need of unconventional hydrocarbon exploration and development in China.This paper provides a brief introduction and analysis of a new three-dimensional(3D)geomechanical restoration method developed in recent years.After an in-depth discussion on the technical principle and specific characteristics of the fields,we designed a feasible workflow for two oil-gas fields with great unconventional oil-gas resource potentials in China(Weiyuan and Jiulongshan oil-gas fields of Sichuan).After discussing the major challenges and limitations of the new technology,we also suggest its research efforts and future application prospect It is shown that the new technology will be an effective method to facilitate the exploration and development of unconventional oil and gas resources in China.     

Petroleum residues in the waters of the Shatt al-Arab River and the northwest region of the Arabian Gulf

During April 1980, water samples were collected from 12 sites in the Shatt al-Arab River and its estuary in the northwest region of the Arabian Gulf. The samples were extracted and the concentration of petroleum hydrocarbons were determined spectrofluorometrically, in order to provide information on the background values of oil generally present in these waters. Total hydrocarbon concentrations of these samples ranged from 2.7 to 86.7 μgL^?1 expressed in terms of Kuwait crude oil equivalents. The highest concentrations were found at sites in the Shatt al-Arab River that are near port areas.     

Bioremediation of oil sludge-contaminated soil

Bioremediation has become an important method for the restoration of oil-polluted environments by the use of indigenous or selected microbial flora. Several factors such as aeration, use of inorganic nutrients or fertilizers and the type of microbial species play a major role in the remediation of oil-contaminated sites. Experiments were undertaken for bioremediation of oil sludge-contaminated soil in the presence of a bacterial consortium, inorganic nutrients, compost and a bulking agent (wheat bran). Experiments were conducted in glass troughs for the 90-day period. Bulked soil showed more rapid degradation of oil compared to all other amendments. During the experimental period, wheat bran-amended soil showed 76% hydrocarbon removal compared to 66% in the case of inorganic nutrients-amended soil. A corresponding increase in the number of bacterial populations was also noticed. Addition of the bacterial consortium in different amendments significantly enhanced the removal of oil from the petroleum sludge from different treatment units.     

Bioremediation of PAHs and VOCs: Advances in clay mineral–microbial interaction

Bioremediation is an effective strategy for cleaning up organic contaminants, such as polycyclic aromatic hydrocarbons (PAHs) and volatile organic compounds (VOCs). Advanced bioremediation implies that biotic agents are more efficient in degrading the contaminants completely. Bioremediation by microbial degradation is often employed and to make this process efficient, natural and cost-effective materials can serve as supportive matrices. Clay/modified clay minerals are effective adsorbents of PAHs/VOCs, and readily available substrate and habitat for microorganisms in the natural soil and sediment. However, the mechanism underpinning clay-mediated biodegradation of organic compounds is often unclear, and this requires critical investigation. This review describes the role of clay/modified clay minerals in hydrocarbon bioremediation through interaction with microbial agents in specific scenarios. The vision is on a faster, more efficient and cost-effective bioremediation technique using clay-based products. This review also proposes future research directions in the field of clay modulated microbial degradation of hydrocarbons.     

Current concepts and applications of air quality simulation models

Current air quality simulation models (AQSM) based on the continuity equation employ the gradient transport approximation and neglect the effect of turbulent fluctuation on chemical reactions. The implications of these approximations are examined, and an alternative statistical, Lagrangian approach applicable to nonreactive pollutants is also discussed.Practically, the working equations of AQSMs are derived from either the Gaussian principle or the conservation-of-mass principles, in conjunction with the semi-empirical parameterizatio of meteorological and photochemical aspects of the problem. The main features of the treatment of the meteorology and current concepts of the photochemical smog mechanism are examined. Some applications of AQMSs, e.g., predictions of future trends of urban carbon monoxide concentrations and photochemical smog, derivation of the relationship between ambient oxidant levels and precursor emission, and estimation of hydrocarbon reactivity for photochemical smog formation, are presented.     

ATR-FTIR spectroscopy reveals polycyclic aromatic hydrocarbon contamination despite relatively pristine site characteristics: Results of a field study in the Niger Delta

Fourier-transform infrared (FTIR) spectroscopy is an emerging technique to detect biochemical alterations in biological tissues, particularly changes due to sub-lethal exposures to environmental contaminants. We have previously shown the potential of attenuated total reflection FTIR (ATR-FTIR) spectroscopy to detect real-time exposure to contaminants in sentinel organisms as well as the potential to relate spectral alterations to the presence of specific environmental agents. In this study based in the Niger Delta (Nigeria), changes occurring in fish tissues as a result of polycyclic aromatic hydrocarbon (PAH) exposure at contaminated sites are compared to the infrared (IR) spectra of the tissues obtained from a relatively pristine site. Multivariate analysis revealed that PAH contamination could be occurring at the pristine site, based on the IR spectra and significant (P < 0.0001) differences between sites. The study provides evidence of the IR spectroscopy techniques' sensitivity and supports their potential application in environmental biomonitoring.     

A laboratory study on CO2 emission from asphalt binder and its reduction with the use of warm mix asphalt

Oxidation of hydrocarbon in asphalt binder leads to the production of carbon dioxide (CO₂) during the production of hot mix asphalt. The objective of this laboratory study was to investigate the effects of the asphalt additive Sasobit^®, asphalt content and mixing/placement temperature on CO₂ emissions from binder with laboratory measurements. The isolated effects of Sasobit on asphalt absorption into the aggregate were also looked at. Temperature was found to be the only statistically significant factor on emissions. This would suggest that warm mix asphalt technology, which employs the use of Sasobit in asphalt mixtures, is a very effective way of lowering the industry's CO₂ emission impact, both directly and by the use of less energy for heating. This work predicts that greater than 30% reduction of CO₂ emissions is possible with typically used levels of Sasobit.