Multiphase transfer processes in waste rock piles producing acid mine drainage: 2. Applications of numerical simulation

Acid mine drainage (AMD) results from the oxidation of sulfides, mainly pyrite, present in mine wastes, either mill tailings or waste rock. This is the second of two papers describing the coupled physical processes taking place in waste rock piles undergoing AMD production. Since the oxidation of pyrite involves the consumption of oxygen and the production of heat, the oxidation process initiates coupled processes of gas transfer by diffusion and convection as well as heat transfer. These processes influence the supply of oxygen that is required to sustain the oxidation process. This second paper describes a numerical simulator used to represent the interaction of these coupled transfer processes. Numerical simulations are applied to two large sites with extensive characterization programs and widely different properties and behavior that were described in the first paper. The South Dump of the Doyon mine in Canada is permeable and has a high pyrite oxidation rate, thus making temperature-driven air convection the main oxygen supply mechanism. The Nordhalde of the Ronnenberg mining district in Germany contains lower permeability material which is less reactive, thus leading to a more balanced contribution of gaseous diffusion and convection as oxygen supply mechanisms. Overall, simulations allow a coherent representation of the conditions monitored within the waste rock piles and the confirmation of their physical properties. Conceptual simulations are also carried out to illustrate the potential effect of border membranes and layered co-mingling as mitigation methods used to control AMD production in either active or future waste rock piles.     

Numerical simulations of pyrite oxidation and acid mine drainage in unsaturated waste rock piles

Numerical simulations of layered, sulphide-bearing unsaturated waste rock piles are presented to illustrate the effect of coupled processes on the generation of acid mine drainage (AMD). The conceptual 2D systems were simulated using the HYDRUS model for flow and the POLYMIN model for reactive transport. The simulations generated low-pH AMD which was buffered by sequential mineral dissolution and precipitation. Sulphide oxidation rates throughout the pile varied by about two orders of magnitude (0.004-0.4 kg m-3 year-1) due to small changes in moisture content and grain size. In the fine-grained layers, the high reactive surface area induced high oxidation rates, even though capillary forces kept the local moisture content relatively high. In waste rock piles with horizontal layers, most of the acidity discharged through vertical preferential flow channels while with inclined fine grained layers, capillary diversion channeled the AMD to the outer slope boundary, keeping the pile interior relatively dry. The simulation approach will be useful for helping evaluate design strategies for controlling AMD from waste rock.     

Geochemical characterization of acid mine drainage from a waste rock pile, Mine Doyon, Québec, Canada

Water quality in the unsaturated and saturated zones of a waste rock pile containing sulphides was investigated. The main objectives of the project were (1) the evaluation of geochemical trends including the acid mine drainage (AMD)-buffering mechanism and the role of secondary minerals, and (2) the investigation of the use of stable isotopes for the interpretation of physical and geochemical processes in waste rock. Pore water in unsaturated zone was sampled from suction lysimeters and with piezometers in underlying saturated rocks. The investigation revealed strong temporal (dry period vs. recharge period), and spatial (slope vs. central region of pile) variability in the formation of acid mine drainage. The main secondary minerals observed were gypsum and jarosite. There was a higher concentration of gypsum in solid phase at Site TBT than at Site 6, suggesting that part of the gypsum formed at Site 6 in the early stage of AMD has been already dissolved. Formation of secondary minerals contributed to the formation of AMD by opening of foliation planes in waste rock, thus increasing the access of oxidants like O2 and Fe3+ to previously encapsulated pyrite. The behavior of several dissolved species such as Mg, Al, and Fe2+ can be considered as conservative in the leachate. Stable isotopes, deuterium and 18O, indicated internal evaporation within the pile, and were used to trace recharge pulses from snowmelt. Isotope trends for 34S and 18O(SO4) indicated a lack of sulfate reduction and zones of active oxidation of pyrite, respectively. Results of numerical modeling of pyrite oxidation and gas and water transport were consistent with geochemical and isotopic trends and confirmed zones of high evaporation rate within the rock pile close to the slope. The results indicate that physical and chemical processes within the pile are strongly coupled and cannot be considered separately when oxidation rates are high and influence gas transport as a result of heat generation.     

Use of O2 consumption and CO2 production in kinetic cells to delineate pyrite oxidation-carbonate buffering and microbial respiration in unsaturated media

Identifying zones of sulphide oxidation and carbonate buffering is important in the development of a management plan for mine waste-rock piles. In this study, we used a kinetic cell technique to measure rates of O2 consumption and CO2 production in low sulphide (<0.12 wt.% S), low inorganic carbon (<0.20 wt.% C(inorganic)), gneissic waste rock and associated organic-rich lake sediment (0.7 wt.% C(organic)), and forest soil (1.4 wt.% C(organic)) collected from the Key Lake uranium mine in Saskatchewan, Canada. Solid chemistry, stable carbon isotope, pore water sulphate concentration data, and stoichiometric considerations indicated that O2 consumption and CO2 production were constrained by microbial respiration in the lake sediment and forest soil and by pyrite oxidation-carbonate buffering in the gneissic waste rock. Mean ratios of molar CO2 production to O2 consumption rates were 0.5 for lake sediment, 0.7 for forest soil, and 0.2 for gneissic waste rock. The different O2/CO2 ratios suggested that O2-CO2 monitoring may provide a practical tool for identifying the zones of microbial respiration and pyrite oxidation-carbonate buffering in mine waste-rock piles. Rates of O2 consumption and CO2 production were about one order of magnitude greater in lake sediment than in gneissic waste rock, indicating that microbial respiration would exert a control on the distribution of O2 and CO2 gas in waste-rock piles constructed upon the dewatered lake sediments.     

Origin of middle rare earth element enrichment in acid mine drainage-impacted areas

The commonly observed enrichment of middle rare earth elements (MREE) in water sampled in acid mine drainage (AMD)-impacted areas was found to be the result of preferential release from the widespread mineral pyrite (FeS₂). Three different mining-impacted sites in Europe were sampled for water, and various pyrite samples were used in batch experiments with diluted sulphuric acid simulating AMD-impacted water with high sulphate concentration and high acidity. All water samples independent on their origin from groundwater, creek water or lake water as well as on the surrounding rock types showed MREE enrichment. Also the pyrite samples showed MREE enrichment in the respective acidic leachate but not always in their total contents indicating a process-controlled release. It is discussed that most probably complexation to sulphite (SO₃ ^2?) or another intermediate S-species during pyrite oxidation is the reason for the MREE enrichment in the normalized REE patterns.     

Characterization of flow and transport processes within the unsaturated zone of Yucca Mountain, Nevada, under current and future climates

This paper presents a large-scale modeling study characterizing fluid flow and tracer transport in the unsaturated zone of Yucca Mountain, Nevada, a potential repository site for storing high-level radioactive waste. The study has been conducted using a three-dimensional numerical model, which incorporates a wide variety of field data and takes into account the coupled processes of flow and transport in the highly heterogeneous, unsaturated fractured porous rock. The modeling approach is based on a dual-continuum formulation of coupled multiphase fluid and tracer transport through fractured porous rock. Various scenarios of current and future climate conditions and their effects on the unsaturated zone are evaluated to aid in the assessment of the proposed repository's system performance using different conceptual models. These models are calibrated against field-measured data. Model-predicted flow and transport processes under current and future climates are discussed.     

磁黄铁矿氧化机理及酸性矿山废水防治的研究进展

磁黄铁矿是矿山尾矿堆中最为常见且分布很广的一种硫化铁矿物.由于硫化物矿物氧化后不仅产生酸性废水,还会释放出大量可溶的、生物可利用形态的微量金属,并且酸性环境会进一步增强这些有毒金属的移动性,因此是造成矿山周围水体环境污染的罪魁祸首.为了阻止或降低磁黄铁矿的自然风化反应速度从而达到源头治理酸性矿山废水的目的,首先必须研究它在各种条件下的氧化机理、氧化产物和氧化速度.对近年来国外在磁黄铁矿晶体结构、反应活性以及酸性矿山废水的产生与防治等方面的研究进行了综述.     

Long-term oxygen depletion from infiltrating groundwaters: model development and application to intra-glaciation and glaciation conditions

Processes that control the redox conditions in deep groundwaters have been studied. The understanding of such processes in a long-term perspective is important for the safety assessment of a deep geological repository for high-level nuclear waste. An oxidising environment at the depth of the repository would increase the solubility and mobility of many radionuclides, and increase the potential risk for radioactive contamination at the ground surface. Proposed repository concepts also include engineered barriers such as copper canisters, the corrosion of which increases considerably in an oxidising environment compared to prevailing reducing conditions. Swedish granitic rocks are typically relatively sparsely fractured and are best treated as a dual-porosity medium with fast flowing channels through fractures in the rock with a surrounding porous matrix, the pores of which are accessible from the fracture by diffusive transport. Highly simplified problems have been explored with the aim to gain understanding of the underlying transport processes, thermodynamics and chemical reaction kinetics. The degree of complexity is increased successively, and mechanisms and processes identified as of key importance are included in a model framework. For highly complex models, analytical expressions are not fully capable of describing the processes involved, and in such cases the solutions are obtained by numerical calculations. Deep in the rock the main source for reducing capacity is identified as reducing minerals. Such minerals are found inside the porous rock matrix and as infill particles or coatings in fractures in the rock. The model formulation also allows for different flow modes such as flow along discrete fractures in sparsely fractured rocks and along flowpaths in a fracture network. The scavenging of oxygen is exemplified for these cases as well as for more comprehensive applications, including glaciation considerations. Results show that chemical reaction kinetics control the scavenging of oxygen during a relatively short time with respect to the lifetime of the repository. For longer times the scavenging of oxygen is controlled by transport processes in the porous rock matrix. The penetration depth of oxygen along the flowpath depends largely on the hydraulic properties, which may vary significantly between different locations and situations. The results indicate that oxygen, in the absence of easily degradable organic matter, may reach long distances along a flow path during the life-time of the repository (hundreds to thousands of metres in a million years depending on e.g. hydraulic properties of the flow path and the availability of reducing capacity). However, large uncertainties regarding key input parameters exist leading to the conclusion that the results from the model must be treated with caution pending more accurate and validated data. Ongoing and planned experiments are expected to reduce these uncertainties, which are required in order to make more reliable predictions for a safety assessment of a nuclear waste repository.     

Prevention of sulfide oxidation in waste rock by the addition of lime kiln dust

During the operation of a mine, waste rock is often deposited in heaps and usually left under ambient conditions allowing sulfides to oxidize. To focus on waste rock management for preventing acid rock drainage (ARD) formation rather than ARD treatment could avoid its generation and reduce lime consumption, costs, and sludge treatment. Leachates from 10 L laboratory test cells containing sulfide-rich (>?60% pyrite) waste rock with and without the addition of lime kiln dust (LKD) (5 wt.%) were compared to each other to evaluate the LKD’s ability to maintain near neutral pH and reduce the sulfide oxidation. Leaching of solely waste rock generated an acidic leachate (pH?<?1.3) with high concentrations of As (21 mg/L), Cu (20 mg/L), Fe (18 g/L), Mn (45 mg/L), Pb (856 μg/L), Sb (967 μg/L), S (17 g/L), and Zn (23 mg/L). Conversely, the addition of 5 wt.% LKD generated and maintained a near neutral pH along with decreasing of metal and metalloid concentrations by more than 99.9%. Decreased concentrations were most pronounced for As, Cu, Pb, and Zn while S was relatively high (100 mg/L) but decreasing throughout the time of leaching. The results from sequential extraction combined with element release, geochemical calculations, and Raman analysis suggest that S concentrations decreased due to decreasing sulfide oxidation rate, which led to gypsum dissolution. The result from this study shows that a limited amount of LKD, corresponding to 4% of the net neutralizing potential of the waste rock, can prevent the acceleration of sulfide oxidation and subsequent release of sulfate, metals, and metalloids but the quantity and long-term stability of secondary minerals formed needs to be evaluated and understood before this method can be applied at a larger scale.

     

A mountain-scale thermal-hydrologic model for simulating fluid flow and heat transfer in unsaturated fractured rock

A multidimensional, mountain-scale, thermal-hydrologic (TH) numerical model is presented for investigating unsaturated flow behavior in response to decay heat from the proposed radioactive waste repository in the Yucca Mountain unsaturated zone (UZ), The model, consisting of both two-dimensional (2-D) and three-dimensional (3-D) representations of the UZ repository system, is based on the current repository design, drift layout, thermal loading scenario, and estimated current and future climate conditions. This mountain-scale TH model evaluates the coupled TH processes related to mountain-scale UZ flow. It also simulates the impact of radioactive waste heat release on the natural hydrogeological system, including heat-driven processes occurring near and far away from the emplacement tunnels or drifts. The model simulates predict thermally perturbed liquid saturation, gas- and liquid-phase fluxes, and water and rock temperature elevations, as well as the changes in water flux driven by evaporation/condensation processes and drainage between drifts. These simulations provide insights into mountain-scale thermally perturbed flow fields under thermal loading conditions.     

Identification of key parameters controlling dissolved oxygen migration and attenuation in fractured crystalline rocks

In the crystalline rocks of the Canadian Shield, geochemical conditions are currently reducing at depths of 500-1000 m. However, during future glacial periods, altered hydrologic conditions could potentially result in enhanced recharge of glacial melt water containing a relatively high concentration of dissolved oxygen (O2). It is therefore of interest to investigate the physical and geochemical processes, including naturally-occurring redox reactions, that may control O2 ingress. In this study, the reactive transport code MIN3P is used in combination with 2k factorial analyses to identify the most important parameters controlling oxygen migration and attenuation in fractured crystalline rocks. Scenarios considered are based on simplified conceptual models that include a single vertical fracture, or a fracture zone, contained within a rock matrix that extends from the ground surface to a depth of 500 m. Consistent with field observations, Fe(II)-bearing minerals are present in the fractures (i.e. chlorite) and the rock matrix (biotite and small quantities of pyrite). For the parameter ranges investigated, results indicate that for the single fracture case, the most influential factors controlling dissolved O2 ingress are flow velocity in the fracture, fracture aperture, and the biotite reaction rate in the rock matrix. The most important parameters for the fracture zone simulations are flow velocity in the individual fractures, pO2 in the recharge water, biotite reaction rate, and to a lesser degree the abundance and reactivity of chlorite in the fracture zone, and the fracture zone width. These parameters should therefore receive increased consideration during site characterization, and in the formulation of site-specific models intended to predict O2 behavior in crystalline rocks.     

Development of a gravity-independent wastewater bioprocessor for advanced life support in space.

Operation of aerobic biological reactors in space is controlled by a number of challenging constraints, mainly stemming from mass transfer limitations and phase separation. Immobilized-cell packed-bed bioreactors, specially designed to function in the absence of gravity, offer a viable solution for the treatment of gray water generated in space stations and spacecrafts. A novel gravity-independent wastewater biological processor, capable of carbon oxidation and nitrification of high-strength aqueous waste streams, is presented. The system, consisting of a fully saturated pressurized packed bed and a membrane oxygenation module attached to an external recirculation loop, operated continuously for over one year. The system attained high carbon oxidation efficiencies often exceeding 90% and ammonia oxidation reaching approximately 60%. The oxygen supply module relies on hydrophobic, nonporous, oxygen selective membranes, in a shell and tube configuration, for transferring oxygen to the packed bed, while keeping the gaseous and liquid phases separated. This reactor configuration and operating mode render the system gravity-independent and suitable for space applications.     

Neutralization/prevention of acid rock drainage using mixtures of alkaline by-products and sulfidic mine wastes

Backfilling of open pit with sulfidic waste rock followed by inundation is a common method for reducing sulfide oxidation after mine closure. This approach can be complemented by mixing the waste rock with alkaline materials from pulp and steel mills to increase the system’s neutralization potential. Leachates from 1 m³ tanks containing sulfide-rich (ca.30 wt %) waste rock formed under dry and water saturated conditions under laboratory conditions were characterized and compared to those formed from mixtures. The waste rock leachate produced an acidic leachate (pH?<?2) with high concentrations of As (65 mg/L), Cu (6 mg/L), and Zn (150 mg/L) after 258 days. The leachate from water-saturated waste rock had lower concentrations of As and Cu (<2 μg/L), Pb and Zn (20 μg/L and 5 mg/L), respectively, and its pH was around 6. Crushed (<6 mm) waste rock mixed with different fractions (1–5 wt %) of green liquid dregs, fly ash, mesa lime, and argon oxygen decarburization (AOD) slag was leached on a small scale for 65 day, and showed near-neutral pH values, except for mixtures of waste rock with AOD slag and fly ash (5 % w/w) which were more basic (pH?>?9). The decrease of elemental concentration in the leachate was most pronounced for Pb and Zn, while Al and S were relatively high. Overall, the results obtained were promising and suggest that alkaline by-products could be useful additives for minimizing ARD formation.     

Synthesising acid mine drainage to maintain and exploit indigenous mining micro-algae and microbial assemblies for biotreatment investigations

The stringent regulations for discharging acid mine drainage (AMD) has led to increased attention on traditional or emerging treatment technologies to establish efficient and sustainable management for mine effluents. To assess new technologies, laboratory investigations on AMD treatment are necessary requiring a consistent supply of AMD with a stable composition, thus limiting environmental variability and uncertainty during controlled experiments. Additionally, biotreatment systems using live cells, particularly micro-algae, require appropriate nutrient availability. Synthetic AMD (Syn-AMD) meets these requirements. However, to date, most of the reported Syn-AMDs are composed of only a few selected heavy metals without considering the complexity of actual AMD. In this study, AMD was synthesised based on the typical AMD characteristics from a copper mine where biotreatment is being considered using indigenous AMD algal-microbes. Major cations (Ca, Na, Cu, Zn, Mg, Mn and Ni), trace metals (Al, Fe, Ag, Na, Co, Mo, Pb and Cr), essential nutrients (N, P and C) and high SO₄ were incorporated into the Syn-AMD. This paper presents the preparation of chemically complex Syn-AMD and the challenges associated with combining metal salts of varying solubility that is not restricted to one particular mine site. The general approach reported and the particular reagents used can produce alternative Syn-AMD with varying compositions. The successful growth of indigenous AMD algal-microbes in the Syn-AMD demonstrated its applicability as appropriate generic media for cultivation and maintenance of mining microorganisms for future biotreatment studies.     

Biogeometallurgical pre-mining characterization of ore deposits: an approach to increase sustainability in the mining process

Based on the knowledge obtained from acid mine drainage formation in mine waste environments (tailings impoundments and waste rock dumps), a new methodology is applied to characterize new ore deposits before exploitation starts. This gives the opportunity to design optimized processes for metal recovery of the different mineral assemblages in an ore deposit and at the same time to minimize the environmental impact and costs downstream for mine waste management. Additionally, the whole economic potential is evaluated including strategic elements. The methodology integrates high-resolution geochemistry by sequential extractions and quantitative mineralogy in combination with kinetic bioleach tests. The produced data set allows to define biogeometallurgical units in the ore deposit and to predict the behavior of each element, economically or environmentally relevant, along the mining process.     

Utilization of fly ash to improve the quality of the acid mine drainage generated by oxidation of a sulphide-rich mining waste: column experiments

The production of Acid Mine Drainage (AMD) as a result of the oxidative dissolution of sulphides is one of the main pollution problems affecting natural watercourses in mining environments with sulphide-rich residues. In this work, the generation of AMD was prevented by means of the addition of fly ash to sulphide-rich residues in non-saturated column experiments. A column experiment filled with a pyrite-rich sludge with artificial irrigation leached acid drainages (pH approx. 2) containing high concentrations of sulphate, iron and other metals. However, non-saturated column experiments filled with pyritic-rich sludge and fly ash drained leachates characterized by alkaline pH (pH up to 10), low sulphate concentration, and lack of iron and other metals in solution. The pyrite oxidative dissolution at high pH, as a consequence of the leaching of fly ash, favours the metal precipitation inside the column (mainly iron), the coating of pyrite grains, and the attenuation of the oxidation process, resulting in a great improvement in the quality of the leachates.     

Influence of hydrology on heavy metal speciation and mobility in a Pb-Zn mine tailing

Among the inorganic toxicants of greatest concern in mine tailings, Pb, Zn, Cu, Cd and As figure prominently due to their abundance and potential toxicity. Here we report on their biolability and solid-phase speciation in two sediment cores subject to variable hydrological regimes at an abandoned pyritic mine tailing. The oxic conditions of well-drained sediments induced pyrite oxidation and the subsequent liberation of H+, SO4(2-) and considerable quantities of Fe(III), which precipitated as goethite. Solubility of Pb, Zn, Cu and Cd was closely coupled to pH and goethite presence. Metal lability was particularly low in zones of neutralization, formed by the accumulation of calcite, first carried then deposited by percolating waters in both saturated and unsaturated cores. We conclude that differential hydrology induces variable heavy metal speciation and biolability in Pb-Zn mine tailings, and suggest that site-specific risk assessments must account for past and present hydrological regimes.     

Mining, the environment and the treatment of mine effluents

The environmental impact of mining on the ecosystem, including land, water and air, has become an unavoidable reality. Guidelines and regulations have been promulgated to protect the environment throughout mining activities from start-up to site decommissioning, in particular, the occurrence of acid mine drainage (AMD), due to oxidation of sulfide mineral wastes, has become the major area of concern to many mining industries during operations and after site decommissioning. AMD is characterised by high acidity and a high concentration of sulfates and dissolved metals. If it cannot be prevented or controlled, it must be treated to eliminate acidity, and reduce heavy metals and suspended solids before release to the environment. This paper discusses conventional and new methods used for the treatment of mine effluents, in particular the treatment of AMD.     

Haneş and Valea Vinului (Romania) closed mines Acid Mine Drainages (AMDs) – Actual condition and passive treatment remediation proposal

Acid Mine Drainages (AMDs) from Hane? and Valea Vinului (Romania) closed mines were considered for characterization and treatment using a local zeolitic volcanic tuff, ZVT, (M?cica?, Cluj County, Romania). Water samples were collected from two locations, before and after discharging point in case of Hane? mine, and on three horizons in case of Valea Vinului mine. Physico-chemical (pH, total solid, heavy metal ions concentration) analyses showed that the environment is strongly affected by these AMD discharges even if the mines were closed years ago. Iron, manganese and zinc were the main pollutants identified in Hane? mine AMD, while zinc is the one mainly present in case of Valea Vinului AMD. A batch technique (no stirring) in which the ZVT was put in contact with the AMD sample was proposed as a passive remediation technique. ZVT successfully remove heavy metal ion from AMD. According to heavy metal ion concentrations, removal efficiencies are reaching 100%, varying as follows, Fe²⁺ > Zn²⁺ > Mn²⁺. When the ZVT was compared with two cationic resins (strong, SAR and weak acid, WAR) the following series was depicted, SAR > ZVT > WAR.     

Co-treatment of acid mine drainage with municipal wastewater: performance evaluation

Co-treatment of acid mine drainage (AMD) with municipal wastewater (MWW) using the activated sludge process is a novel treatment technology offering potential savings over alternative systems in materials, proprietary chemicals and energy inputs. The impacts of AMD on laboratory-scale activated sludge units (plug-flow and sequencing batch reactors) treating synthetic MWW were investigated. Synthetic AMD containing Al, Cu, Fe, Mn, Pb, Zn and SO₄ at a range of concentrations and pH values was formulated to simulate three possible co-treatment processes, i.e., (1) adding raw AMD to the activated sludge aeration tank, (2) pre-treating AMD prior to adding to the aeration tank by mixing with digested sludge and (3) pre-treating AMD by mixing with screened MWW. Continuous AMD loading to the activated sludge reactors during co-treatment did not cause a significant decrease in chemical oxygen demand (COD), 5-day biochemical oxygen demand, or total organic carbon removal; average COD removal rates ranged from 87–93 %. Enhanced phosphate removal was observed in reactors loaded with Fe- and Al-rich AMD, with final effluent TP concentrations <2 mg/L. Removal rates for dissolved Al, Cu, Fe and Pb were 52–84 %, 47–61 %, 74–86 % and 100 %, respectively, in both systems. Manganese and Zn removal were strongly linked to acidity; removal from net-acidic AMD was <10 % for both metals, whereas removal from circum-neutral AMD averaged 93–95 % for Mn and 58–90 % for Zn. Pre-mixing with screened MWW was the best process option in terms of AMD neutralization and metal removal. However, significant MWW alkalinity was consumed, suggesting an alkali supplement may be necessary.