提高废旧塑料再生产品品质的预处理技术

废旧塑料是一种很有价值的可回收利用资源,经过再生可制取高品质塑材制品。但目前因塑料种类、颜色等原因,难有统一、合适的预处理技术,从而导致废旧塑料回收率低和塑材产品品质低等问题。针对废旧塑料的分选、破碎、清洗预处理技术影响塑材产品品质因素进行研究,重点考察破碎料粒度与氯乙烯(VCM)含量对再生塑料物化性质的多因素影响,实验结果表明,PVC型材产品杂质粒子数≤12个/900cm2,优于国标GB5761-1993相应的SG3型号优等品要求的16个/900cm2,且水循环利用率大于90%,环保效益好,具有极大的推广价值。     

Recovery of municipal waste incineration bottom ash and water treatment sludge to water permeable pavement materials

Water treatment plant sludge and municipal solid waste incinerator bottom ash are non-hazardous residues, and they can be reprocessed to produce useful materials for city public works. In this study, an effort was endeavored to investigate the properties of water permeable bricks made of water treatment sludge and bottom ash without involving an artificial aggregate step. The water treatment plant sludge was dried and ground, and the bottom ash was subjected to magnetic separation to remove ferrous metals. Both sludge and bottom ash were ground and sieved to a size of <2mm. Different contents of water treatment sludge (70-95% by weight) were mixed with bottom ash and the blocks were molded under a pressure of 110 kg/cm2. Thereafter, the molded blocks were sintered at temperatures of 900-1200 degrees C for 60-360 min. The compressive strength, permeability and water absorption rate of the sintered brick were examined and compared to relevant standards. The amount of bottom ash added in the mixture with water treatment sludge affects both the compressive strength and the permeability of the sintered bricks. The two effects are antonymous as higher bottom ash content will develop a beehive configuration and have more voids in the brick. It is concluded that a 20% weight content of bottom ash under a sintering condition of 1150 degrees C for 360 min can generate a brick with a compressive strength of 256 kg/cm2, a water absorption ratio of 2.78% and a permeability of 0.016 cm/s.     

Research on solid waste management system: to improve existing situation in Corlu Town of Turkey

Over the past decades, uncontrolled population growth and rapid urbanization and industrialization have resulted in environmental problems in Corlu Town, Turkey. One of the most important problems is solid waste due to inadequate management practices. Nowadays, increasing public awareness of the environment compels local authorities to define and to adopt new solutions for waste management. This paper presents a general overview of current solid waste management practices in Corlu Town and principles of the recommended municipal solid waste (MSW) management system. In Corlu, 170 tonnes of municipal solid waste are generated each day, or 1.150 kg per capita per day. Approximately one-half of the municipal solid waste generated is organic material and 30% of the MSW consists of recyclable materials. The recommended system deals with maximizing recycling and minimizing landfilling of municipal solid waste, and consists of separation at source, collection, sorting, recycling, composting and sanitary landfilling. This study also analyzed the recommended system with respect to feasibility and economics. To evaluate whether the suggested system is cost effective or not, the operating cost of the recommended system and market prices of recyclable materials were compared, and the results show that the recommended system will reduce required landfill volume up to 27% of compared to the present situation. The profit of the recommended system is estimated to be about 80 million US dollars.     

Immobilized microbe bioreactors for waste water treatment

The application of adapted microbial populations immobilized on a porous diatomaceous earth carrier to pre-treat and reduce toxic concentration of volatile organics, pesticides, petroleum aliphatics and aromatics has been demonstrated for several industrial sites. In the pre-treatment of industrial effluents and contaminated ground-waters, these bioreactors have been used to optimize and reduce the cost of conventional treatment systems, i.e. steam stripping, carbon adsorption and traditional biotreatment. Additionally, these systems have been employed as seeding devices for larger biotreatment systems. The cost effective utilization of an immobilized microbe reactor system for water supply regeneration in a microgravity environment is presented. The feasibility of using immobilized biomass reactors as an effluent treatment technology for the biotransformation and biodegradation of phenols, chlorinated halocarbons, residual oils and lubricants was evaluated. Primary biotransformation tests of two benchmark toxicants, phenol and ethylene dichloride at concentrations expected in life support effluents were conducted. Biocatalyst supports were evaluated for colonization potential, surface and structural integrity, and performance in continuous flow bioreactors. The implementation of such approaches in space will be outlined and specific areas for interfacing with other non-biological treatment approaches will be considered for advanced life support, tertiary waste water biotreatment.     

Treatment of waste water from refuse incineration plants

The waste-water purification systems used at the Bamberg waste incinerator are described as an example of how easily such critical waste water can be treated. Water from flue gas scrubbers and ash washing which contains mercury, heavy metals and salts is precipitated with lime and trimercaptotriazine (TMT15) in two stages to produce an effluent that meets the strong discharge standards of the F.R.G.     

黄岛电厂废水的回收及利用

介绍了黄岛电厂生物接触氧化法废水处理工程的主要设备、技术参数及工艺流程,分析了循环利用实现零排放的经济效益和社会效益。     

纳米材料在水处理中的应用

从纳米光催化氧化技术、纳米膜过滤技术和纳米吸附材料等三方面分别介绍了纳米技术在水处理方面的研究和应用情况.     

火电厂废水综合处理方法的研究

根据火电厂工业废水的特点，结合无机，有机高分子絮凝剂的絮凝特性，研究设计了高效去除油、SS、COD等的分离池及火电厂废水处理工艺，该工艺系统简单，运行可靠，占地面积小，可降低工程投资30％－80％，运行费用降低30％以上，0．7－2a即可收回投资，处理后的水质良好。     

An attempt to perform water balance in a Brazilian municipal solid waste landfill

This paper presents an attempt to model the water balance in the metropolitan center landfill (MCL) in Salvador, Brazil. Aspects such as the municipal solid waste (MSW) initial water content, mass loss due to decomposition, MSW liquid expelling due to compression and those related to weather conditions, such as the amount of rainfall and evaporation are considered. Superficial flow and infiltration were modeled considering the waste and the hydraulic characteristics (permeability and soil-water retention curves) of the cover layer and simplified uni-dimensional empirical models. In order to validate the modeling procedure, data from one cell at the landfill were used. Monthly waste entry, volume of collected leachate and leachate level inside the cell were monitored. Water balance equations and the compressibility of the MSW were used to calculate the amount of leachate stored in the cell and the corresponding leachate level. Measured and calculated values of the leachate level inside the cell were similar and the model was able to capture the main trends of the water balance behavior during the cell operational period.     

化学法去除循环水排污水中的磷

研究了聚合氯化铝、硫酸铁、氯化铁及生石灰等除磷剂对循环水排污水的除磷效果,考察了反应温度、反应时间、污水p H和除磷剂投加方式对除磷效果的影响。实验结果表明:聚合氯化铝和硫酸铁的除磷效率相当,其次是氯化铁,生石灰的除磷效率最低;最终选用聚合氯化铝作为除磷剂,对循环水排污水进行除磷处理时无需调节其p H,反应可在室温下进行,反应时间需大于300 s;聚合氯化铝最佳投加量为40 mg/L,二次性投加聚合氯化铝的除磷效果明显好于一次性投加;二次性投加出水TP为0.37 mg/L。     

脱硫废水生化处理初探

火电厂烟气脱硫过程产生的废水中污染物主要包括悬浮物、过饱和的亚硫酸盐、硫酸盐以及重金属等,燃煤电厂烟气系统增设脱硝装置后,进入脱硫废水的氨氮、总氮含量急剧增加。通过对国内外多个电厂的脱硫废水处理系统运行情况的调研及分析,采用厌氧氨氧化工艺作为废水脱氮方式是可行的。     

湿法烟气脱硫废水的处理

简述了湿法烟气脱硫废水的特性及处理原理，分析了废水在反应池的停留时间，投加药品量等主要因素对处理效果的影响，并就工艺控制过程和最终处理结果进行讨论。     

锅炉酸洗柠檬酸废液处理

从理论上分析了经NaOH溶液预处理的柠檬酸酸洗废液再用灰水进行处理，降低COD值的可行性，实际应用结果表明，该方案可以达到“以废治废”的目的。     

火电厂石灰石湿法烟气脱硫废水处理方法

阐述了石灰石湿法烟气脱硫（FGD）废水的水质特征，介绍了国内外普遍应用的化学沉淀去除脱硫废水中重金属、悬浮物等物质的工艺特点及其不足，并着重介绍了最新发展的流化床法、沉淀一微滤法等FCD废水处理新型工艺。     

聚氯乙烯生产中的废水综台利用

介绍了新疆天业化工园区聚氯乙烯生产中废水的处理技术和综合利用情况,包括乙炔上清液的回收、含汞废液处理及聚合母液水的处理回收利用。利用节水技术,每年可回用水近580万t,氯化氢气体5万t,产生经济效益5380万元。     

火力发电厂全厂废水零排放

讨论了火电厂废水类型、排放标准及治理与回用原则，研究了全厂废水零排放的准确含义、约束条件、影响因素、主要内容以及国内外应用示例，为实施火电厂全厂废水零排放提供参考。     

马头电厂废水处理系统介绍

介绍了河北马头电厂废水处理工艺系统流程、设计及系统调试运行指标。处理后的电厂废水作为循环冷却水的补水,减少了新鲜水用量和污水排放量，对北方地区厂区废水回收利用具有借鉴意义，在火电厂废水资源利用方面有很好的应用前景。     

NaCl-H2SO4法回收CODCr废液中的硫酸银

采用NaCl-H2SO4法回收CODcr废液中的硫酸银,回收率达到80．5％。将回收与市售硫酸银试剂同时对4种废水做CODcr测定的对比实验,经数据分析得出,所回收的试剂完全符合要求,可以循环用于CODcr测定。该方法具有操柞简便、回收率高和成本低的特点。     

徐州电厂水务管理现状与设想

通过对徐州发电厂生产及生活用水的现状分析，结合企业的实际情况，论述了为实施废水零排放需要采取的节水措施及注意事项。     

工业污废水处理用防腐蚀材料及结构

较详细地介绍了常见的工业污废水砼处理池的防腐蚀技术、防腐蚀材料、结构及施工要点，为腐蚀性工业污废水的处理提供一种可行的防腐途径。