Novel applications of red mud as coagulant, adsorbent and catalyst for environmentally benign processes

Red mud (RM) is a by-product of bauxite processing via the Bayer process. Its disposal remains an issue of great importance with significant environmental concerns. In the past decades, a lot of research has been done to utilize red mud for environmental-benign applications such as a building material additive and for metal recovery. In recent years, red mud has also been explored for gas cleaning and wastewater treatment. In this paper, we review varying novel applications of red mud as a coagulant and adsorbent for water and gas treatment as well as catalyst for some industrial processes. The environmental compatibility of red mud is discussed. Some directions of future research are also proposed. Red mud presents a promising application in water treatment for removal of toxic heavy metal and metalloid ions, inorganic anions such as nitrate, fluoride, and phosphate, as well as organics including dyes, phenolic compounds and bacteria. In addition, red mud can also be employed as catalysts for hydrogenation, hydrodechlorination and hydrocarbon oxidation. Moreover, leaching and eco-toxicological tests indicate that red mud does not present high toxicity to the environment before or after reuse.     

电子束半干法烟气净化技术

电子束烟气净化技术由于能够同时脱除烟气中的SO2 和NOx 而得到世界各国环保界的重视。传统的电子束烟气净化技术在工业应用中存在能耗高、副产品黏结严重、工作可靠性低等问题。新型电子束半干法烟气净化技术解决了传统工艺在工业化应用中存在的问题 ,可以在较小的辐照剂量下获得更为理想的烟气净化效果 ,提高了系统的工作可靠性 ,是一项工业应用前景十分广阔的环保技术。     

Study on the photodegradation of amidosulfuron in aqueous solutions by LC-MS/MS

Sulfonylurea herbicides are extensively widespread for the protection of a variety of crops and vegetables because of their low application rates, high selectivity and low persistency in the environment; unfortunately, their low persistence does not always correspond to a lower toxicity, since new species potentially more toxic and stable than the precursor herbicides can form, owing to natural degradation processes. Here, the photodegradation of amidosulfuron in aqueous solutions was studied by high-performance liquid chromatography with diode array detection and tandem mass spectrometry to identify the degradation products in order to outline the environmental fate of the molecules generating from the simulation of one of the natural processes that can occur, i.e., photoinduced degradation. The photodegradation process results in a first order kinetic reaction with a t _1/2 value of 276 h (11.5 days) and a kinetic constant of 0.0027 h^?1, and three possible degradation products were identified. The results obtained are then compared to those obtained in previous works carried out in comparable experimental conditions about nicosulfuron and tribenuron-methyl, two sulfonylurea herbicides belonging to different classes, and to literature data: hypotheses on the existence of preferential degradation pathways are then drawn, in consequence of the molecular structure of the sulfonylurea pesticide. In particular, the use of organic solvents to obtain complete solubilization of the sample plays a fundamental role and deeply influences the degradation processes that, therefore, not always fully adhere to the actual natural photodegradation pathways. Moreover, considerations about toxicity were driven since the complete mineralisation of the sample is not reached: even when the parent pesticides are totally degraded, they are, however, transformed into other organic compounds showing, if subject to ecotoxicological tests, at least the same toxicity of the precursor herbicides. The evidence here presented suggests that, at least for the class of sulfonylurea pesticides, their professed low persistence actually does not produce any real advantage.     

Computation of uncertainty for atmospheric emission projections from key pollutant sources in Spain

Emission projections are important for environmental policy, both to evaluate the effectiveness of abatement strategies and to determine legislation compliance in the future. Moreover, including uncertainty is an essential added value for decision makers. In this work, projection values and their associated uncertainty are computed for pollutant emissions corresponding to the most significant activities from the national atmospheric emission inventory in Spain. Till now, projections had been calculated under three main scenarios: “without measures” (WoM), “with measures” (WM) and “with additional measures” (WAM). For the first one, regression techniques had been applied, which are inadequate for time-dependent data. For the other scenarios, values had been computed taking into account expected activity growth, as well as policies and measures. However, only point forecasts had been computed. In this work statistical methodology has been applied for: a) Inclusion of projection intervals for future time points, where the width of the intervals is a measure of uncertainty. b) For the WoM scenario, ARIMA models are applied to model the dynamics of the processes. c) In the WM scenario, bootstrap is applied as an additional non-parametric tool, which does not rely on distributional assumptions and is thus more general. The advantages of using ARIMA models for the WoM scenario including uncertainty are shown. Moreover, presenting the WM scenario allows observing if projected emission values fall within the intervals, thus showing if the measures to be taken to reach the scenario imply a significant improvement. Results also show how bootstrap techniques incorporate stochastic modelling to produce forecast intervals for the WM scenario.     

The prevention principle

Environmentally sound manufacture does not have its source only in developing and improving the techniques for treating solid, liquid and gaseous wastes at the end of the production process. Our experience shows that more effort and capital budgets must be devoted to developing preventive measures. Although the treatment techniques have become very advanced and meet ecological requirements to a very high degree, they are now reaching the limits of their technological and economic feasibility. Environmental protection at the production site has undergone structural change in recent years. The emphasis has shifted to preventive techniques which affect the production process itself, avoiding the emergence of waste at the “end of the pipe” by preventing its formation or recycling it straight away. This integrated approach is in harmony with the demands of sustainable production. The functions of in-process environmental protection measures need to be looked at as a whole from the points of view of both environmental protection and cost-effectiveness. Some integrated methods are described.     

Environmental building policy by the use of microalgae and decreasing of risks for Canadian oil sand sector development

Environmental building recommendations aimed towards new environmental policies and management-changing decisions which as example demonstrated in consideration of the problems of Canadian oil sands operators. For the implementation of the circular economic strategy, we use an in-depth analysis of reported environmental after-consequence on all stages of the production process. The study addressed the promotion of innovative solutions for greenhouse gas emission, waste mitigation, and risk of falling in oil prices for operators of oil sands with creating market opportunities. They include the addition of microalgae biomass in tailings ponds for improvement of the microbial balance for the water speedily cleaning, recycling, and reusing with mitigation of GHG emissions. The use of food scraps for the nutrition of microalgae will reduce greenhouse gas emission minimally, on 0.33 MtCO₂eq for Alberta and 2.63 MtCO₂eq/year for Canada. Microalgae-derived biofuel can reduce this emission for Alberta on 11.9–17.9 MtCO₂eq and for Canada on 71–106 MtCO₂eq/year, and the manufacturing of other products will adsorb up to 135.6 MtCO₂ and produce 99.2 MtO₂. The development of the Live Conserve Industry and principal step from non-efficient protection of the environment to its cultivation in a large scale with mitigation of GHG emission and waste as well as generating of O₂ and value-added products by the use of microalgae opens an important shift towards a new design and building of a biological system.     

An actor game on implementation of environmental quality standards for nitrogen in a Swedish agricultural catchment

Despite political efforts, diffuse pollution from agriculture continues to be the single largest source of nitrogen (N) emissions into the aquatic environment in many countries and regions. This fact, and the recent enactment of a new Swedish environmental code, led to the design of a study targeted at the evaluation of new N pollution abatement strategies. An actor game was chosen as the key component of the study, with a focus on four major goals: to test the implementability of legally binding environmental quality standards for nitrate concentration in groundwater and N transport to the sea, to find sets of agriculturally feasible and cost-effective measures to decrease N loads, to investigate the possibilities for collective action through negotiated and institutionalized actor cooperation, and to investigate the role of mathematical modeling in environmental N management. Characteristics from the agriculturally dominated catchment of Genevads?n (224 km2) on the southwest coast of Sweden served as the playing field for the actor game. The most noteworthy result from the study was that it appeared to be possible to meet ambitious environmental N standards with less economically drastic measures than anticipated by most of the participants. The actor game was shown to be a good method for learning about the new Swedish environmental code and its application and for gaining deeper insight into the issues of N management. In addition, the actor game functioned as an arena for gaining a more thorough understanding of the views of different stakeholders.     

Modelling photochemical oxidant formation, transport, deposition and exposure of terrestrial ecosystems

The chemical processes responsible for production of photochemical oxidants within the troposphere have been the subject of laboratory and field study throughout the last three decades. During the same period, models to simulate the atmospheric chemistry, transport and deposition of ozone (O(3)) from individual urban sources and from regions have been developed. The models differ greatly in the complexity of chemical schemes, in the underlying meteorology and in spatial and temporal resolution. Input information from land use, spatial and temporally disaggregated emission inventories and meteorology have all improved considerably in recent years and are not fully implemented in current models. The development of control strategies in both North America and Europe to close the gaps between current exceedances of environmental limits, guide values, critical levels or loads and full compliance with these limits provides the focus for policy makers and the support agencies for the research. The models represent the only method of testing a range of control options in advance of implementation. This paper describes currently applied models of photochemical oxidant production and transport at global and regional scales and their ability to simulate individual episodes as well as photochemical oxidant climatology. The success of current models in quantifying the exposure of terrestrial surfaces and the population to potentially damaging O(3) concentrations (and dose) is examined. The analysis shows the degree to which the underlying processes and their application within the models limit the quality of the model products.     

Evaluation of pollution prevention options to reduce styrene emissions from fiber-reinforced plastic open molding processes

Pollution prevention (P2) options to reduce styrene emissions, such as new materials and application equipment, are commercially available to the operators of open molding processes. However, information is lacking on the emissions reduction that these options can achieve. To meet this need, the U.S. Environmental Protection Agency's (EPA) Air Pollution Prevention and Control Division, working in collaboration with Research Triangle Institute, measured styrene emissions for several of these P2 options. In addition, the emission factors calculated from these test results were compared with the existing EPA emission factors for gel coat sprayup and resin applications. Results show that styrene emissions can be reduced by up to 52% by using controlled spraying (i.e., reducing overspray), low-styrene and styrene-suppressed materials, and nonatomizing application equipment. Also, calculated emission factors were 1.6-2.5 times greater than the mid-range EPA emission factors for the corresponding gel coat and resin application. These results indicate that facilities using existing EPA emission factors to estimate emissions in open molding processes are likely to underestimate actual emissions. Facilities should investigate the applicability and feasibility of these P2 options to reduce their styrene emissions.     

Evaluation of total volatile organic compound emissions from adhesives based on chamber tests

In 1997, Homeswest in western Australia and Murdoch University developed a project to construct low-allergen houses (LAHs) in a newly developed suburb. Before the construction of LAHs, all potential volatile organic compound (VOC) emission materials used in LAHs are required to be measured to ensure that they are low total VOC (TVOC) emission materials. This program was developed based on this purpose. In recent times, the number of complaints about indoor air pollution caused by VOCs has increased. A number of surveys of indoor VOCs have indicated that many indoor materials contribute to indoor air pollution. Although some studies have been conducted on the characteristics of VOC emissions from adhesives, most of them were focused on VOC emissions from floor adhesives. Few measurements of VOC emissions from adhesives used for wood, fabrics, and leather are available. Furthermore, most research on VOC emissions from adhesives has been done in countries with cool climates, where ventilation rates in the indoor environment are lower than those in Mediterranean climates, due to energy conservation. VOCs emitted from adhesives have not been sufficiently researched to prepare an emission inventory to predict indoor air quality and to determine both exposure levels for the Australian population and the most appropriate strategies to reduce exposure. An environmental test chamber with controlled temperature, relative humidity, and airflow rate was used to evaluate emissions of TVOCs from three adhesives used frequently in Australia. The quantity of TVOC emissions was measured by a gas chromatography/flame ionization detector. The primary VOCs emitted from each adhesive were detected by gas chromatography/mass spectrometry. The temporal change of TVOC concentrations emitted from each adhesive was tested. A double-exponential equation was then developed to evaluate the characteristics of TVOC emissions from these three adhesives. With this double-exponential model, the physical processes of TVOC emissions can be explained, and a variety of emission parameters can be calculated. These emission parameters could be used to estimate real indoor TVOC concentrations in Mediterranean climates.     

选矿技术在城市固体废弃物资源化中的应用

选矿技术作为一种成熟的矿物分离技术已广泛应用于城市固体废弃物资源化领域 ,促进了环境的保护和资源的综合回收 ;同时也开辟了选矿技术新的应用领域。结合实例介绍国内外常用的各种城市固体废弃物的分选工艺 ,指出选矿技术的运用对固体废弃物的资源化有着重要的实际意义     

Electrochemical advanced oxidation processes: today and tomorrow. A review

In recent years, new advanced oxidation processes based on the electrochemical technology, the so-called electrochemical advanced oxidation processes (EAOPs), have been developed for the prevention and remediation of environmental pollution, especially focusing on water streams. These methods are based on the electrochemical generation of a very powerful oxidizing agent, such as the hydroxyl radical (^?OH) in solution, which is then able to destroy organics up to their mineralization. EAOPs include heterogeneous processes like anodic oxidation and photoelectrocatalysis methods, in which ^?OH are generated at the anode surface either electrochemically or photochemically, and homogeneous processes like electro-Fenton, photoelectro-Fenton, and sonoelectrolysis, in which ^?OH are produced in the bulk solution. This paper presents a general overview of the application of EAOPs on the removal of aqueous organic pollutants, first reviewing the most recent works and then looking to the future. A global perspective on the fundamentals and experimental setups is offered, and laboratory-scale and pilot-scale experiments are examined and discussed.     

Plant protection products: assessing the risk for terrestrial plants

The fundamental data requirements for the authorization of plant protection products and the inclusion of active ingredients in Annex I of Council Directive 91/414/EEC (Council Directive of 15 July 1991 referring to placing plant protection products on the market (91/414/EEC). Official Journal of European Communities L 230, 19 August 1991) are described in the Annexes II and III of this Directive. Definite instructions with regard to preconditions for implementation and methodology (guidelines) concerning investigations with terrestrial plants are deficient. In addition to that, the uniform principles for the registration of plant protection products in the Member States described in Annex VI of the directive do not include any criteria concerning the risk assessment for non-target plants. However, plant protection products often show effects on non-target plants which need to be assessed as a requirement for the authorisation of the product. Hence, the German Federal Environmental Agency has developed a tiered approach to assess the effects of plant protection products on non-terrestrial plants. The risk is assessed using the effect-concentration evaluated in ecotoxicological tests and the environmental concentration predicted by validated exposure models. To protect non-target plants in terrestrial ecosystems assessment factors need to be considered. In the future, the risk for terrestrial plants needs to be addressed, also with regard to the revision of the Annexes of Directive 91/414/EEC.     

推行环境标志 促进环境保护和经济发展

环境标志是一种体现环境保护要求的证明性商标，它向公众表示该产品在生产、流通、使用以及处理处置过程中对环境无害或危害极小。本文论述了环境标志的意义和作用，简要介绍了国外环境标志的发展动态，探讨了中国环境标志的建立和发展，评述了中国环境标志制度的特色和中国首批标志产品。     

转炉炼钢大气污染环境评价问题探讨

为了探讨转炉炼钢大气污染环境评价的关键问题,以某大型钢铁集团炼钢厂扩建项目为基础,分析了该类建设项目工艺流程和产污环节;确定了转炉炼钢的重点污染因子是粉尘、烟尘和SO2等.通过对转炉炼钢烟尘治理措施的有效性分析,得出了该扩建项目大气污染物粉尘、烟尘和SO2等能达标排放并满足总量控制指标,符合清洁生产要求.     

Environmental chamber test methodology for characterizing organic vapors from solid emission sources

Environmental test chambers are an important tool in the characterization of organic emissions from solid consumer and construction products and in the evaluation of their potential impact on indoor air quality. The results of extensive research concerning formaldehyde (CH₂O) emissions from such products strongly support this application of environmental chambers to measure product emissions and provide useful input for the design of environmental chamber studies. The physical design and test methodology for environmental chambers are strongly influenced by several elements in a comprehensive project plan for source characterization, including the selection process for test samples and the mathematical models used to interpret the organic emissions data. The protocol for environmental chamber testing extends broadly from the acquisition, preparation and conditioning of test specimens, to the selection and control of environmental test conditions, and to the calibration and measurement of system parameters and organic emissions. The requirements for environmental control inside the test chamber can be estimated from the sensitivity of the organic emission rates of the test products (e.g. CH₂O emissions from pressed-wood products) to variation in environmental parameters. The cost of the numerous, multiple-organic analyses required for environmental chamber testing of solid emitters is seen as a strong limitation to product selection strategies and modeling efforts. The modeling of organic emissions from solid emitters can be both a planning tool for development of chamber test methodology and a means to interpret test chamber results.     

从LCA角度评价塑料用品与木制用品对环境的影响

通过对一次性塑料与纸制用品（木制品）的评价研究的基础上，对木制品与塑料制品从生命周期评价（LCA）的角度上对问题作进一步的探讨和研究，得出结论为塑料制品为环保型产品。     

环保催化剂在环境保护中的应用研究进展

环境问题是人类不能回避的现实问题 ,以环境保护为目的的催化化学在解决环境保护问题中起着核心作用。本文从狭义上综述了除去SO2 、NOX、CO2 及N2 O等污染物质用的环保催化剂的种类和应用研究进展以及未来环保催化剂的研究发展方向。重点介绍了环保催化剂在脱硫、脱氮及净化汽车尾气方面的应用情况     

Megacities and atmospheric pollution

About half of the world's population now lives in urban areas because of the opportunity for a better quality of life. Many of these urban centers are expanding rapidly, leading to the growth of megacities, which are defined as metropolitan areas with populations exceeding 10 million inhabitants. These concentrations of people and activity are exerting increasing stress on the natural environment, with impacts at urban, regional and global levels. In recent decades, air pollution has become one of the most important problems of megacities. Initially, the main air pollutants of concern were sulfur compounds, which were generated mostly by burning coal. Today, photochemical smog--induced primarily from traffic, but also from industrial activities, power generation, and solvents--has become the main source of concern for air quality, while sulfur is still a major problem in many cities of the developing world. Air pollution has serious impacts on public health, causes urban and regional haze, and has the potential to contribute significantly to climate change. Yet, with appropriate planning, megacities can efficiently address their air quality problems through measures such as application of new emission control technologies and development of mass transit systems. This review is focused on nine urban centers, chosen as case studies to assess air quality from distinct perspectives: from cities in the industrialized nations to cities in the developing world. While each city--its problems, resources, and outlook--is unique, the need for a holistic approach to the complex environmental problems is the same. There is no single strategy in reducing air pollution in megacities; a mix of policy measures will be needed to improve air quality. Experience shows that strong political will coupled with public dialog is essential to effectively implement the regulations required to address air quality problems.