四种氨氮自动监测仪与实验室国标方法测定氨氮的比较分析

深圳市地表水水质自动监测子站安装了HACH AMTAX inter2、科泽K301、WTW Trescon UN和瑞士万通ALERTCOLORIMETER ADI 2004氨氮自动分析仪。以潮汐河流深圳河为例,从仪器测量原理、分析方法、测量过程、分析能力、对海水适应性等方面分析比较四种氨氮自动分析仪与实验室方法之间的异同。     

无人监测船在城市内河水质监测中的应用

采用无人船监测技术结合镇江市内河水质状况普查工作,大于120 h的航行试验,总航行里程约为90 km,对建成区水体中的氨氮(NH3-N)、溶解氧(DO)、氧化还原电位(ORP)和浊度进行原位监测,结果表明,通过合理选择搭载相应的测量电极,无人监测船能够满足地表水测量数据准确度的要求,同时可实现研究区域的监测全覆盖,提升了地表水环境监测的工作效率。     

An automatic monitor of formaldehyde in air by a monitoring tape method

An automatic monitor has been developed for measuring formaldehyde in air using a sensitive tape for formaldehyde. It is based on the color change of the tape on reaction with formaldehyde. The porous cellulose tape, containing silica gel as an absorbent and impregnated with the processing solution containing hydroxylamine sulfate, Methyl Yellow (pH indicator; pH 2.9-4.0, red-yellow), glycerin and methanol, was found to be a highly sensitive means of detecting formaldehyde and maintains a stable sensitivity. When the tape was exposed to a sample of air containing formaldehyde, the color of the tape changed from yellow to red. The degree of color change was proportional to the concentration of formaldehyde at a constant sampling time and flow rate, and it could be recorded by measuring the intensity of reflected light (555 nm). The tape could be used to detect down to 0.08 ppm (World Health Organization standard) of formaldehyde with a sampling time of 30 min and a flow rate of 100 mL min-1. Reproducibility tests showed that the relative standard deviation of response (n = 10) was 3.8% for 0.1 ppm formaldehyde. The monitor is simple, specific, capable of unattended operation and is recommended for both laboratory and field operation.     

LS-1型快速监测仪测定水中硫化物的研究

提出并建立了用硼氢化钾发生氢气作载气 ,用吸附层析柱浓缩硫化氢显色比长的快速现场监测方法 ,该方法取被测水样 50 ml,定性检出浓度为 0 0 5mg L,定量检测最低浓度为 0 1 mg L,在 0 1～ 2 0 mg L范围内显色比长线性良好 ,相对误差 (变异系数 ) 3 8% ;加标回收率 96 %～ 1 1 2 % ,研制的 LS 1型快速监测仪结构简单 ,经济费用低 ,进行水中硫化物监测只需 1 0 min,适用于现场的快速、应急监测。     

废水中有机污染指标监测方法的选择

综合考察了废水中各种有机污染物综合指标的测试对象、干扰、准确度、精确度及其分析测试技术等各种因素 ,对实现其自动化连续测量的影响。针对某些监测技术产生的严重二次污染问题 ,提出了绿色 (清洁 )监测技术的概念。文章认为在重点废水污染源安装在线监测系统实行总量控制的过程中 ,应避免使用造成严重二次污染的 CODCr在线监测仪 ,而应当采用臭氧氧化法在线监测仪 ,或其他综合指标 ,如 TOC     

Determination of the working level of radon/thoron mixtures by personal α-dosimeters and environmental α-monitors using gross α-counting

Analytical procedures are presented which permit the determination of the Working Levels of the radon and thoron progenies with personal α-dosimeters and α-particle environmental monitors, operating on time integrating principles, from gross α-counts. Experiments have been carried out in an underground uranium mine and in a radon/thoron environmental chamber, specially designed for calibration purposes, to verify theoretical data. In general, and notwithstanding a number of complicating factors, fair to good agreement has been found between theoretical and experimental data. Experimental values have been found to be lower than theoretical values, an observation which is partly ascribed to plate-out of decay products in the instrument's sampling heads.     

Indoor radon/thoron levels and inhalation doses to some populations in Himachal Pradesh, India

It is well established that some areas of Himachal Pradesh (H.P.) state of India situated in the environs of the Himalayan mountains are relatively rich in uranium-bearing minerals. Some earlier studies by our group have indicated high levels of radon (>200 Bq m(-3)) in the dwellings. It is in this context that an indoor radon/thoron survey has been carried out in selected villages of four districts in the state of H.P. This survey has been conducted as a part of a national, coordinated project using twin chamber dosemeter cups designed by the Environmental Assessment Division (EAD), Department of Atomic Energy, Govt. of India. The track-etch technique is used for calibration of plastic detector LR-115 type-II which are employed for recording alpha tracks due to radon/thoron and their daughters. Year long radon/thoron data have been collected for seasonal correlations of indoor radon/thoron in the dwellings. The indoor radon levels have been found to vary from a minimum value of 17.4 Bq m(-3) to a maximum value of 140.3 Bq m(-3). The indoor thoron levels vary from a minimum value of 5.2 Bq m(-3) to a maximum value of 131.9 Bq m(-3). The year average dose rate for the local population varies from 0.03 microSv h(-1) to 0.83 microSv h(-1). The annual exposure dose to inhabitants in all the dwellings lies below the upper limit of 10 mSv given in ICRP-65.     

影响总氮准确定量的光谱检测因素

对现行的双波长紫外分光光度法在测定水体总氮中由光学检测本身所产生的影响因素进行了探讨,提出了一种基于三波长的光谱检测总氮量的方法。结果表明,由于仪器信号波动或光散射引起的光谱检测基线上移所造成的误差可以用在NO3-没有吸收的340 nm处的吸光度加以判断,从而用三波长的方法扣除由于光谱基线上移对220 nm和275 nm处吸光度检测的干扰。对2个水样进行同样的光谱检测,以不同的计算公式所得的数据比较可以看出,三波长法明显优于双波长法。三波长法检测重现性相对偏差小于0.2%,其总氮含量的结果要比双波长法高7%～16%。这也解决了人们对总氮含量测定结果总是偏低的困惑。     

扩散法采集个体接触空气中氨

本文采用扩散法将空气中氨采集在磷酸———甘油浸渍的无纺布吸收层上。该法采样速率为１３７６±８４ｍｌ／ｍｉｎ,与动力采样法现场对比测定,总不确定度为±１９３％,。采样器体积小,无噪声,操作方便,适于个体接触量与室内空气污染监测     

Detection of amount and activity of living algae in fresh water by dehydrogenase activity (DHA)

A study was performed to determine the amount and activity of living algae in fresh water by measuring the dehydrogenase activity (DHA) of algae in order to provide a method to assess the effect of algicide treatment. The conditions of measurement were researched with respect to incubating temperature and duration, and selection of extractants. The comparison between this method and an alternative method, chlorophyll a, shows that this method is simple and easy to practice, and can determine the effect of algicide treatment.     

基于顺序注射分析技术的总氮在线分析仪

针对环境监测领域,研制了一种基于顺序注射分析技术的总氮在线分析仪。该分析仪以注射泵为分析过程的液体驱动定量单元,以多通道选向阀为流路切换单元,以发光二极管和硅光电管为检测单元。在该分析平台上,含氮化合物在高温高压条件下经过硫酸钾氧化成硝酸根,硝酸根被还原为亚硝酸根后与N-(1-萘基)乙二胺盐酸盐生成偶氮染料,再由光电检测单元测定吸光度值,经计算得到总氮含量。与现有的总氮在线分析技术相比,该分析仪具有检测单元简单、生产成本低、测量精度高、试剂消耗和废液产生量少等优点,适合于环境监测等领域的长时间在线分析。     

Sampling and analysis for radon-222 dissolved in ground water and surface water

Radon-222 is a naturally occurring radioactive gas in the uranium-238 decay series that has traditionally been called, simply, radon. The lung cancer risks associated with the inhalation of radon decay products have been well documented by epidemiological studies on populations of uranium miners.The realization that radon is a public health hazard has raised the need for sampling and analytical guidelines for field personnel. Several sampling and analytical methods are being used to document radon concentrations in ground water and surface water worldwide but no convenient, single set of guidelines is available. Three different sampling and analytical methods-bubbler, liquid scintillation, and field screening-are discussed in this paper. The bubbler and liquid scintillation methods have high accuracy and precision, and small analytical method detection limits of 0.2 and 10 pCi/l (picocuries per liter), respectively. The field screening method generally is used as a qualitative reconnaissance tool.     

五日生化需氧量测定中稀释倍数的估算

假定样品经过培养后耗氧率达５５％；推导出ＢＯＤ５稀释倍数Ｋ＝ＢＯＤ５／４．４，由稀释程度规定推导出ＢＯＤ５稀释倍数Ｋ＝（ＢＯＤ５－１）／４．０两种方法Ｋ基本相同，标准样品，工业废水经上述方法稀释后，测定结果比较满意，尤其对工业废水测定，既缩短了分析时间，又降低了测定误差。     

Monitoring of eutrophication by microbial uptake kinetics of dissolved organic matter in waters

The monitoring of eutrophication can be performed by measuring the turnover times of amino acids in watermasses using the Wright-Hobbie uptake kinetics approach.The substrate specificity of amino acids varies greater with turnover times than with sampling location in watermasses with a certain water type. Thus a specific substrate among the essential amino acids should be selected to use for measuring the turnover time, in order to monitor precisely the state of trophic excitation within the steady-state oscillation in a certain aquatic system. On the other hand, either singular or plural substrates among the essential amino acids can be used for measuring the turnover time for the identification of a watermass, relevant to eutrophication.     

Respirometric Monitoring for the Determination of Effective Height and Reaction Rate Constant in Up-Flow Autotrophic Denitrification Reactor Packed with Sulfur

A novel technology for the removal of nitrogen from wastewater, autotrophic denitrification process with sulfur particle, has been developed. A respirometer was employed for the monitoring of nitrogen gas produced in the reactor. It was found that the autotrophic denitrification studied by gas production rate and nitrate depletion rate followed a first order reaction from the relationship. The reaction rate constant based on effective volume, k_N was ranged from 2.67 to 3.07 h^–1. The effective height was around 23.8 and 50% of the total height for 11.8 and 5.9 h of packed bed contact time, respectively. It was assumed that the reaction rate constants were similar in each experimental condition, PBCT = 11.9 and 5.9 h because there was little gradient of biomass concentration within 50% of the total height. The respirometry was found to be a simple and fast way to monitor the denitrification process. The method was especially useful for the determination of kinetic parameters.     

Radon (thoron) daughter measurements with an automated,programmable, radiation monitor

A technical evaluation of an automated, programmable, grab-sampler manufactured by Pylon Electronic Development under the commercial name WL-1000C has been conducted. Six different methods are implemented in the instrument for analyzing radiation data. Any one method can be used on command and easily selected by means of a keyboard. Available radiation data that can be retrieved on command include radon (thoron) daughter concentrations and radon (thoron) Working Levels. Measurements were carried out under laboratory-controlled conditions in a large (26 m³) radon/thoron test facility, designed for calibration purposes, and at an underground uranium mine. Data obtained with the WL-1000C have been compared with conventional grab-sampling (e.g., Kusnetz, Thomas-Tsivoglou and Markov methods) and with other automated radiation instrumentation previously tested at our laboratories. Tests were done under constant radiation conditions and also under rapidly fluctuating conditions in order to determine the response of the instruments and methods in these two cases of practial interest. The Working Level used in these experiments was in the approximate range of 0.01 to 10 WL. Tests were conducted under a variety of environmental conditions. Good agreement with grab-sampling data was found for radon daughters. Some discrepancies with grab-sampling data were found for radon daughter/thoron daughter mixtures. Disagreement in the latter case is to be expected because of -energy overlap between RaA and ThC.     

Optimal Sampling and Problematic Likelihood Functions in a Simple Population Model

Markov chains provide excellent statistical models for studying many natural phenomena that evolve with time. One particular class of continuous-time Markov chain, called birth–death processes, can be used for modelling population dynamics in fields such as ecology and microbiology. The challenge for the practitioner when fitting these models is to take measurements of a population size over time in order to estimate the model parameters, such as per capita birth and death rates. In many biological contexts, it is impractical to follow the fate of each individual in a population continuously in time, so the researcher is often limited to a fixed number of measurements of population size over the duration of the study. We show that, for a simple birth–death process, with positive Malthusian growth rate, subject to common practical constraints, there is an optimal schedule for measuring the population size that minimises the expected confidence region of the parameter estimates. Throughout our exposition of the optimal experimental design, we compare it to a simpler equidistant design, where the population is sampled at regular intervals. This is an experimental design worthy of comparison since it can represent a much simpler design to implement in practice. In order to find optimal experimental designs for our population model, we make use of a combination of useful statistical machinery. Firstly, we use a Gaussian diffusion approximation of the underlying discrete-state Markov process, which allows us to obtain analytical expressions for Fisher’s information matrix (FIM), which is crucial to optimising the experimental design. We also make use of the cross-entropy method of stochastic optimisation for the purpose of maximising the determinant of FIM to obtain the optimal experimental designs. Our results show that the optimal schedule devised by others for a simple model of population growth without death can be extended, for large populations, to the two-parameter model that incorporates both birth and death. For the simple birth–death process, we find that the likelihood surface is also problematic and poses serious problems for point estimation and easily defining confidence regions. A Bayesian approach to inference is proposed as a way in which these problems could be circumvented.     

Performance of an electrochemical COD (chemical oxygen demand) sensor with an electrode-surface grinding unit

An electrochemical COD (chemical oxygen demand) sensor using an electrode-surface grinding unit was investigated. The electrolyzing (oxidizing) action of copper on an organic species was used as the basis of the COD measuring sensor. Using a simple three-electrode cell and a surface grinding unit, the organic species is activated by the catalytic action of copper and oxidized at a working electrode, poised at a positive potential. When synthetic wastewater was fed into the system, the measured Coulombic yields were found to be dependent on the COD of the synthetic wastewater. A linear correlation between the Coulombic yields and the COD of the synthetic wastewater was established (10-1000 mg L(-1)) when the electrode-surface grinding procedure was activated briefly at 8 h intervals. When various kinds of wastewater samples obtained from various sewage treatment plants were measured, linear correlations (r(2)> or = 0.92) between the measured EOD (electrochemical oxygen demand) value and COD of the samples were observed. At a practical wastewater treatment plant, the measurement system was successfully operated with high accuracy and good stability over 3 months. These experimental results show that the application of the measurement system would be a rapid and practical method for the determination of COD in water industries.     

氯化铵-火焰原子吸收光谱法测定地表水中的总铬

应用原子吸收法测定水样中的总铬，在不同条件下对空白样品、标准样品和实际样品进行试验分析，进一步验证了方法的准确度和精密度，加标回收率在96.8%-103%之间，相对标准偏差为2.1%。试验表明，该方法准确可靠，实际操作具有可行性，适用于工业废水和受污染地表水中总铬的测定。     

Chemcatcher and DGT passive sampling devices for regulatory monitoring of trace metals in surface water

This work aimed to evaluate whether the performance of passive sampling devices in measuring time-weighted average (TWA) concentrations supports their application in regulatory monitoring of trace metals in surface waters, such as for the European Union's Water Framework Directive (WFD). The ability of the Chemcatcher and the diffusive gradient in thin film (DGT) device sampler to provide comparable TWA concentrations of Cd, Cu, Ni, Pb and Zn was tested through consecutive and overlapping deployments (7-28 days) in the River Meuse (The Netherlands). In order to evaluate the consistency of these TWA labile metal concentrations, these were assessed against total and filtered concentrations measured at relatively high frequencies by two teams using standard monitoring procedures, and metal species predicted by equilibrium speciation modeling using Visual MINTEQ. For Cd and Zn, the concentrations obtained with filtered water samples and the passive sampling devices were generally similar. The samplers consistently underestimated filtered concentrations of Cu and Ni, in agreement with their respective predicted speciation. For Pb, a small labile fraction was mainly responsible for low sampler accumulation and hence high measurement uncertainty. While only the high frequency of spot sampling procedures enabled the observation of higher Cd concentrations during the first 14 days, consecutive DGT deployments were able to detect it and provide a reasonable estimate of ambient concentrations. The range of concentrations measured by spot and passive sampling, for exposures up to 28 days, demonstrated that both modes of monitoring were equally reliable. Passive sampling provides information that cannot be obtained by a realistic spot sampling frequency and this may impact on the ability to detect trends and assess monitoring data against environmental quality standards when concentrations fluctuate.