长荡湖沉积物重金属污染特征及生态风险评价

为明确长荡湖重金属污染特征及生态风险,于2018年9月至2019年8月采集长荡湖入湖河流、湖泊水体及表层沉积物样品,分析8种重金属(Cr、Ni、Cu、Zn、As、Cd、Pb和Hg)含量,采用正定矩阵因子(PMF)模型和主成分分析多元线性回归(PCA-MLR)模型对湖泊重金属污染来源进行解析,评估长荡湖沉积物重金属污染程度及风险等级。结果表明,8种重金属有7种超出江苏省土壤环境本底值,秋季长荡湖沉积物中重金属含量普遍较低。Cr、Cd、Zn和Ni的分配系数较高,现阶段不易从沉积物中释放到水体中,但由于Cd多为可交换态且在沉积物中含量较大,因此仍具有从沉积物中释放到水体中的潜力;Cu、As和Hg的分配系数较低,具有从沉积物中释放到水体中的潜力。Hg、Cd、As和Cu污染来源中农业生产占比最高,Pb和Zn交通污染占比最高,Ni自然来源占比最高,Cr工业活动占比最高。长荡湖春季和夏季受重金属污染程度更高,Cd和Hg的生态风险较高,需重点关注。     

丰水期长荡湖入湖河流微生物群落结构特征及影响因素

为探究长荡湖入湖河流微生物群落结构特征及与环境因子的响应关系,在综合考虑主要入湖河流和污染源类型等因素的基础上进行分组,分析入湖河流中溶解氧(DO)、pH、氮磷比(TN/TP)、水温(WT)、总有机碳(TOC)、总氮(TN)和总磷(TP)共7个理化因子的分布特征。基于16S rRNA高通量测序技术并结合Circos、ANOSIM和冗余分析(RDA)等方法分析微生物群落结构特征的差异以及微生物群落与理化因子的关系。结果表明：不同污染类型的长荡湖入湖河流中优势菌门、菌属种类相似,但相对丰度却有所差别。优势菌门包括变形菌门(Proteobacteria)、放线菌门(Actinobacteria)和拟杆菌门(Bacteroidetes);优势菌属包含hgcIclade、 CL500-29marinegroup、 Acinetobacter、Comamonadaceae-Unclassified和Hydrogenophaga。ANOSIM分析表明长荡湖入湖河流微生物群落结构特征与污染源类型相关。冗余分析(RDA)结果显示pH、TP与长荡湖入湖河流的优势菌门呈显著相关(P<0.05);DO、...     

金坛市饮用水源地的安全保护机制探讨

在金坛市水源现状分析的基础上,指出了饮用水源存在的问题,并对长荡湖水源进行了水质的现状评价和预测分析,建议长荡湖作为备用水源地,对长荡湖水源地保护区的划分提出了具体方案。最后提出了加强水源地的生态建没、环境风险应急预案和水资源管理体系建设等的水源地保护一系列方案。     

云贵高原湖区典型湖泊沉积物溶解性有机氮分布特征研究

选择云贵高原湖区程海、泸沽湖、杞麓湖沉积物样品,用1 mol/L KCl溶液提取沉积物中溶解性有机氮(DON),研究了DON和氨基酸(AA)的含量变化,探讨了沉积物样品的DON分子量分级特征。结果表明:云贵高原湖区沉积物DON为9.63~103.61 mg/kg,均值为39.80 mg/kg;AA为4.02~25.78 mg/kg,均值为10.88 mg/kg;DON和AA均低于东部平原湖区。污染严重的杞麓湖DON和AA含量较高,主要来自流域内依湖而建的村落生活污水的输入;程海和泸沽湖沉积物中DON和AA污染相对较轻。沉积物DON和AA含量与沉积物其他形态氮、溶解性有机碳(DOC)等污染指标均表现出显著正相关性。DON分子量分级结果显示:该湖区沉积物DON以分子量1、30 ku为主,其中杞麓湖受人类活动影响较大,沉积物中分子量1 ku的DON占主要部分,而程海和泸沽湖污染较轻,沉积物中分子量30 ku的占比更高。     

钱资荡水源地保护方案研究

借鉴国外先进经验，提出了钱资荡水源地保护方案，即封住钱资源荡两头入流，杜绝污染物进入的截污工程；利用长荡湖补充钱资荡水量的引水工程，工荡湖作为战力水源地纳入保护全系中，建立环湖绿色保护带工程；发展以芦苇为生物种的湿地生态工程处理系统。     

太湖西岸宜兴城市水系污染物时空分布特征

选用2011—2014年宜兴市12个监测断面21个水质指标的连续监测数据,解析太湖西岸宜兴城市水系污染物的时空分异特征及影响因素。结果表明,宜兴市城区及入太湖河流污染严重,86.05%以上时段内处于劣Ⅴ类水平,特征污染物为TN、NH3-N、BOD5、TP、COD和Hg。污染物空间分异程度大小依次为:AR-OHNH3-NHgTPCODBOD5F-oil=CODMnLASTNDO。不同区域河流污染物浓度随时间变化基本一致,有机物夏季波动较大主要受温度和降雨的双重影响,TN和NH3-N浓度标线出明显的季节变化:春季冬季夏季秋季,Hg、LAS、AR-OH表现出瞬时排放特性,且主要发生在年初。由分析可得,土地利用强度和方式是影响宜兴市城区及入湖河流污染物分布特征的最主要因素,其次是污染来源、河道类型等的影响,表现为城市核心区、三氿入湖区和西北入湖区污染程度依次增大,但差异水平不明显,西南入湖区则相对较轻。     

邛海主要入湖河流氮、磷入湖污染负荷特征研究

针对入湖河流小流域水文资料缺乏的情况,提出了水文比拟法和水文分割法相结合的入湖径流量与入湖污染负荷计算方法,并对邛海主要入湖河流开展总氮、总磷入湖污染负荷量及组成研究。结果表明：2019—2020年,邛海3条主要入湖河流鹅掌河、官坝河和小青河的两年平均入湖径流量分别为2.19×10⁷、5.31×10⁷、2.94×10⁶ m³/a,其中雨季(5—10月)入湖径流量占到约90%。3条河流两年共计向邛海输送总氮、总磷污染负荷量255.99 t和12 447.22 kg,其中面源污染是邛海主要入湖河流污染负荷的首要来源,总氮、总磷面源污染负荷量分别占入湖污染负荷量的74.48%～81.02%、78.78%～84.39%。降雨量、土地利用方式等是影响邛海主要入湖河流入湖径流量与入湖污染负荷的重要因素。研究结果对邛海流域湖泊富营养化治理的精准实施具有重要意义,同时也为其他水文资料缺乏地区的污染负荷估算提供了方法参考。     

军山湖流域农业非点源污染氮、磷入湖负荷估算

参照国内外相关湖泊研究的方法,在开展流域调查的基础上,按照畜禽养殖污染、农业种植业流失、水产养殖污染和农村生活污染4类途径,结合各乡镇流域面积所占比例、污染源产生量、排放系数和流失系数等估算了军山湖流域农业非点源污染氮、磷的入湖负荷.结果表明,农业种植业流失和畜禽养殖污染是军山潮流域农业非点源污染入湖氮的主要来源,分别占入湖氮总量的37.5％和34.7％,其次为水产养殖污染,占23.2％;畜禽养殖污染是入湖磷的主要来源,占50.8％,其次为农业种植业流失和水产养殖污染,分别占24.4％和20.0％;农村生活污染对入湖氮、磷的贡献率最小.     

东部平原湖区沉积物中溶解性有机氮分布特征

选择东部平原湖区11个湖泊进行水质和表层沉积物调查,采用综合营养状态指数(TLI)对各湖泊营养状态进行评价,研究了沉积物溶解性有机氮(DON)和游离氨基酸(FAA)的含量分布及DON分子质量分级特征,并探讨了不同湖泊沉积物有机质来源。结果表明:除固城湖和骆马湖处于中营养水平外,东部平原湖区其他湖泊均处于富营养化状态。沉积物DON浓度差异较大,在9.98~182.00 mg·kg-1之间波动,均值为57.25 mg·kg-1,太湖、滆湖、阳澄湖沉积物DON含量较高,均在140 mg·kg-1以上,其他湖泊沉积物DON含量均在50 mg·kg-1以下。区域内氨基酸(FAA)分布比较均匀,FAA浓度在3.58~13.28 mg·kg-1之间,平均值是8.14 mg·kg-1。沉积物DON和FAA含量与沉积物其他形态氮、溶解性有机碳(DOC)等污染指标均表现出显著正相关性。东部平原湖区沉积物分子质量分级结果表明:该湖区沉积物DON、DOC和SUV254基本都分布在1 k Da和30 k Da 2个范围内。东部平原湖区C/N比的值介于2.31~89.02之间,除滆湖外其他湖泊沉积物C/N值均大于10,说明该地区湖泊沉积物有机质主要来自外源。     

杭州西湖底栖动物群落结构及其水质生物学评价

2017年对西湖9个点位的底栖动物进行季度调查,共采集到3门7纲25种底栖动物。底栖动物年均密度为280.3个/m~2,主要类别为水生昆虫、寡毛类、软体动物,优势种为羽摇蚊(Chironomus plumosus)和圆田螺(Cipangopaludina)。空间分布上,不同湖区的底栖动物组成存在不同,在主湖区(少年宫、外湖心)底栖动物主要为水生昆虫,摇蚊幼虫为绝对优势种,而湖西区(西里湖、茅家埠、金沙港、乌龟潭、浴鹄湾)底栖动物主要为软体动物。季节变化上,底栖动物密度分布为冬季秋季夏季春季。寡毛类全年采样出现频次较低,作为耐污染种,这表明西湖水环境质量变好。西湖的Shannon-Wiener生物多样性指数(H’)年均值为1.27,西湖水质为轻污染,其中茅家埠、金沙港和乌龟潭点位H’较高,与所在湖区生长大量沉水植物,生境更加稳定有关。H’与加权营养状态指数(TLI(∑))在对西湖个别点位水质评价结果上存在差异,鉴于西湖底栖动物生境易受外界影响导致群落波动较大,因此认为TLI(∑)的评价结果更为准确。     

Optimization of Height of Release of Air Pollutants

A number of key projects in the Environmental Protection Agency (EPA) particulate R&;D program having applicability to industry are presented. For electrostatic precipitators (ESP) there is presented the result of work on large diameter discharge electrodes which provide a decrease in penetration of up to a factor of 4 when compared to conventional small diameter electrodes. Also discussed is the multistage ESP which provides a collection efficiency that would require a collecting plate area 4 or 5 times larger with conventional ESP technology. The E-SOX technology makes use of the multistage concept to free up space in the ESP for SO₂ removals of up to 90%. Electrostatically augmented fabric filtration provides a reduction in pressure drop of about 5 0% as compared to conventional fabric filtration. Wind tunnel modeling of windbreaks for material storage piles indicates a potential for providing engineering design data that would allow significant emission reduction caused by wind erosion     

Investigation of the characteristics of the reflectivity of clouds

This paper investigates some of the reflectivity characteristics that clouds (when modelled as solid bodies) must exhibit to be compatible with observations that the reflecting surface of a cloud (i) appears almost equally bright across its face, (ii) is brightest when the cloud is opposite to the Sun but decreases in brightness as the cloud moves to other positions and (iii) increases in brightness with increasing optical thickness of the cloud in the observer's line of sight. These observations, respectively, are shown to imply that the peak value of the bidirectional total reflectivity from a cloud surface (i) increases in inverse proportion to the cosine of the angle between the Sun and the normal to the cloud surface, as the incident angle increases, (ii) appears to be directed back in the direction of the incident radiation, and (iii) increases as optical thickness of the cloud in the observer's line of sight increases. The results could have application in many fields (e.g. modelling diffuse radiance distributions for cloudy skies).     

Estimation of uncertainty of sampling for analysis of pesticide residues

Abstract

A computer model was used to take random samples from primary sample populations obtained from field trials to simulate the uncertainty of sampling for residue analysis of plant commodities and soil. The results indicate about 40%, 30% and 20% relative uncertainty when random samples of size 5, 10 and 25 are taken respectively, from a single lot. Therefore the sample size should be the same for establishing and enforcing legal limits.     

扬中生态环境建设的思考与实践

结合扬中生态环境的基本情况和存在的不足，进行了具体分析，对扬中未来生态建设的发展方向提出了建议及实施措施。     

实验室质量管理体系内部审核的实施

在实施ISO／IEC17025：1999标准《检测和校准实验室能力的通用要求》过程中，通过实验室质量管理体系内部审核的实践与系统分析，识别出内部审核实施阶段的关键环节，提出召开首次会议、收集审核证据、确定审核发现和召开末次会议的技术方法，对提高内部审核的质量和有效性、获得可靠的审核结论具有重要意义。     

次氯酸钠发生器的研制

介绍了电解法生产次氯酸钠的原理 ,并在原有生产工艺的基础上进行了重新设计和对设备的重新选择、改造 ,得出了各个工艺参数的最佳值 ,生产出高品质的次氯酸钠     

An application of the theory of kinematics of mixing to the study of tropospheric dispersion

The most common technique used for numerical simulations of tracer mixing is that of the numerical solution of the advection–diffusion equation with the unresolved fluxes parameterized using the similarity theory. Despite correct predictions of the overall directions of transport, models based on a numerical solution of the advection–diffusion equation lack sufficient accuracy to correctly reproduce the coupling of mixing with small scale processes which are sensitive to the microstructure of the tracer distribution. The objective of this paper is to revisit the basic formalism employed in numerical models used to investigate atmospheric tracers. The main mathematical method proposed here is the theory of kinematics of mixing which could be applied effectively for simulations of atmospheric transport processes. At the beginning of the paper, we introduce simple mathematical transformations in order to demonstrate how complex topological structures are created by mixing processes. These idealistic flow systems are essential to explain transport properties of much more complex three-dimensional geophysical flows. An example of the application of the kinematics of mixing to the analysis of tracer transport on a planetary scale is presented in the following sections. The complex filamentary structures simulated in the numerical experiment are evaluated using some commonly applied statistical measures in order to compare the results with the data published in the literature. The results of the experiment are also analysed with the help of simple conceptual models of fluid filaments. The microstructure of the tracer distribution introduced in the paper is essential to increase our understanding of atmospheric transport and to develop more realistic parameterizations of small-scale mixing. The presented results could also be used to improve calculations of the coupling between microphysical processes and tracer mixing.     

Impact of overexploitation of shellfish: northeastern coast of India

India has a very extensive coastline of about 7515 km, rich in diverse living resources. These resources continue to deteriorate with rampant harvesting or are altered for other uses such as aquaculture and fisheries. The present paper deals with degrading coastal habitats in northeastern India, and projects the intensity of the stress arising from the collection of tiger prawn seeds (Penaeus monodon) for aquacultural farms and molluskan shells for poultry feed and edible lime. Indiscriminate exploitation of these resources leads to a heavy reduction of the species concerned and other associated marine communities. The magnitude of such destruction has been quantified. The impacts of biodiversity loss and their after-effects on the ecobalance of this coastal system have become a matter of great concern to ecologists to maintain security and sustainability. The authors propose a public awareness program on themes relating to the importance of biodiversity for human livelihoods.     

Comparison of methods for evaluation of activity of photocatalytic films

Objective

This work aims to investigate the correlation between the photocatalytic activity determined by methylene blue bleaching (DIN 52980), stearic acid degradation, and degradation of acetone in gas phase.

Method

The photocatalytic TiO₂ coatings included in this investigation ranged from thin commercially available coatings (Activ^TM and BioClean^TM) and ready to use suspensions (Nano-X PK1245) to lab-produced PVD and sol?Cgel coatings. XRD analysis of the photocatalytic coatings showed that all the coatings consisted of nanocrystalline anatase, although the thickness and porosity varied considerably.

Results

The study showed that the reproducibility of the activity measurements was good. However, more importantly, the investigation showed that there is a good correlation between the activities determined by the different methods even though the characteristics of the photocatalytic coatings and the organic probe molecules varied considerably.

Conclusion

The overall findings of this work suggest that there is a good correlation between the investigated methods. These results are promising for the future work concerning standardization of methods for determination of the activity of photocatalytic films.