论土壤肥力评价指标和方法

阐述了土壤肥力的概念,分析了土壤肥力评价的指标选取和方法选择,提出了科学合理的综合性评价指标体系和评价方法。     

生态城市的指标体系与评价方法

本文从城市生态系统结构，功能和功调度三方面构建了生态城市的指标体系，提出了生态城市的评价方法，并选择上海，深圳，天津，香港等五个沿海城市进行了城市生态化程度的分析。     

我国自然保护区生态评价指标和评价标准

本文针对我国自然保护区的实际状况，筛选出多样性、代表性、稀有性、自然性、面积适宜性及脆弱性和人类威胁等诸项指标进行分析、比较和解析，进而制定了一套较为系统完整而又操作简便的生态评价体系、评价方法和评价标准。该标准适用于自然生态系统类和野生生物类自然保护区生态状况的定量评价。     

康集生态农场小气候的改善

本文采用对比分析的方法，分别对康集生态农场种植园、苗圃地和对照废窑地的主要小气候指标进行了观测分析。结果表明，农场种植园的建立有利于提高生长初期的日平均气温，增加干燥季节的空气相对湿度，明显降低各时期的地面最高温度和大风季节的风速，对农场局部小气候改善起了一定的作用。     

武夷山风景名胜区景观生态评价

以武夷山风景名胜区为研究对象 ,在景观类型划分的基础上 ,首次提出了适合风景名胜区景观生态评价的指标体系 ,该体系包含代表性、稳定性、协调性、奇特性、观赏性、社会性和梯度性等 7个指标 .然后 ,运用层次分析法(AHP)确定各指标的权重 ,进而得到各景观类型的综合评价指数 .根据综合评价指数 ,将风景区划分为 3种景观生态等级 ,即理想景观、正常景观和危急景观 .研究结果表明 :在组成武夷山风景名胜区的 10种景观类型中 ,河流与马尾松林属于理想景观 ,居住地与农田属危急景观 ,其余 6类景观皆为正常景观 ,正常景观 (含理想景观 )面积占整个景区面积的 85 %以上 ,表明了作为世界自然与文化遗产的武夷山风景名胜区总体景观生态现状良好 ,确实受到较为积极有效的保护 .图 1表 4参 35     

康集生态农场能流结构及生态效率分析

本文详细分析了康集生态农场建设初期的能流结构及生态效率。结果表明，经过５年的开发，康集生态农场已初步建成具有较复杂的网络式能流系统。系统的能量利用与转化效率逐年提高，其中种植业和家畜家禽饲养业的能量利用率较高，而养鱼业的能量转化率低，在能量利用上潜力极大。第二性生产的绝大部分人工辅助能依靠系统外输入。据此提出了提高康集生态农场能量利用效率的调控措施。     

广东省耕地分等中的土壤肥力评价指标体系

土壤肥力评价是耕地分等的基础及重要组成部分。土壤肥力评价的关键是评价指标体系的确定，指标的选择原则主要有主导性原则、稳定性原则、差异性原则、分层次控制原则、定量分析与定性分析相结合原则。指标分值和权重的确定方法主要是模糊评价法和层次分析法，但必须依据土壤学的研究成果和生产实践经验。     

工业绿色发展评价指标体系及应用于广东省区域评价的分析

工业的快速发展,给资源环境带来了前所未有的压力,于是人们纷纷探讨绿色发展之路.工业绿色发展评价指标体系的研究旨在发现工业绿色转型升级中的薄弱环节,设计评估工业的绿色发展状况的指标,引导工业绿色转型升级,从而实现工业发展与资源环境的和谐统一.文章借鉴脱钩理论的核心理念,分析资源环境的特征指标,利用工业资源消耗或污染物排放变化对工业产值的弹性脱钩值作为考察工业绿色转型升级的动态指标,建立包括工业资源环境压力、工业资源环境弹性脱钩和工业发展绿化度3个方面的工业绿色发展评价指标体系,并应用于广东省21个地级以上城市的评价分析.研究表明,该指标体系对于评价工业绿色发展具有实际可操作性,结果合理、可靠.对广东各地的实证评价分析显示,广东省工业总体绿色发展水平不断提升,在高压力水平下,逐步向资源节约型、环境友好型的新型工业化道路转型.但由于各地工业发展水平不同、资源环境约束目标不同,工业绿色发展的进程也存在较大区域差异.资源环境约束严格的珠三角核心区工业绿色发展情况相对其他地区较好,属高绿化度高资源环境压力的绿色发展模式.资源环境约束较严格的粤北山区工业转型升级也有明显进展.而在资源环境约束管理不大的珠三角非核心区与粤西地区中,江门和湛江工业绿色发展相对较好,肇庆和茂名一般,惠州和阳江工业呈粗放发展,粤东地区除汕头外,工业粗放发展趋势明显.因此,各地应制定针对性措施,促进工业结构调整,限制高消耗、重污染型行业发展,加大工业污染防治力度,推进高消耗、重污染型行业的生态化转型,推动工业绿色转型升级加快.     

城市人居环境评价体系的研究及应用

在国内外人居环境理论研究及实践的基础上,提出了由系统层、子系统层和指标层构成的城市人居环境评价指标体系,其中系统层由社会经济环境、自然生态环境、公共设施建设、环境资源保护和环境管理能力五部分组成,子系统层由16个指标组成,指标层由43个具体指标组成。利用统计分析法(Delphi)确定各指标的权值。同时,针对本指标体系结构提出了单项评价和综合评价相结合的评价模式,并设置了城市人居环境质量指数和系统协调度两个综合性指标来全面评价城市人居环境质量。通过对重庆市渝北城区的综合评价,评价结果较客观地反映了该城区的实际。     

API-based assessment on urban air environment bearing capability in China

Given the complexity and time-consuming of the conventional environmental capacity based assessment on air environment carrying capacity; a new method for assessing urban air environment carrying capacity based on air pollution index (API) is presented. By using this new method, the air environmental bearing capability of 333 cities at the prefecture level and above is assessed. The results show that of the 333 cities 9.6% is of high bearing capability, 34.5% relatively high bearing capability, 52.6% medium bearing capability, 2.7% low capability, and 0.6% is of weak bearing capability; in terms of regional distribution, the western region is of relatively high air environment bearing capability, followed by north-eastern and eastern regions, and the ambient air quality in the middle region is quite poor; among the 12 urban agglomerations in key regions, Pearl River delta, west side of Taiwan Strait and Chengdu-Chongqing agglomerations are of relatively high carrying capacity while other agglomerations are of medium bearing capability. The assessment results imply that the existing air quality standard (GB3095-1996) is quite unsound.     

基于RS和GIS的生态系统健康评价

生态系统健康评价可以认识区域生态系统健康状况、识别生态环境问题,为制定科学的生态保护对策提供依据,对提高可持续发展和环境管理具有重要的指导作用。文章由压力-状态-响应（P-S-R）概念模型建立了生态系统健康评价指标体系和评价模型,运用RS和GIS技术及统计学分析法,形成程序化、系统化的生态系统健康评价技术方法体系,并以高平市为案例,运用定量的方法对其生态系统健康进行综合评价及分级研究,通过对压力、状态、响应评价结果及健康综合评价结果的分析,结合高平市生态系统健康的自然条件状况与人类活动影响,探讨了影响区域健康的因素,为高平市资源的合理利用与保护提供科学依据。结果表明该技术对生态系统健康评价是切实可行的。     

定量化土地评价指标体系及评价方法探讨

从可持续发展的角度，提出了定量土地评价指标体系建立的原则与依据；分析了土地评价指标体系的现状与存在的问题；总结了土地评价指标体系的量化表达方法，特别是空间统计分析模型和地理信息系统技术在定量化土地评价中的应用。为可持续利用土地评价提供理论依据和方法上的借鉴。     

Human health ambient water quality criteria for 13 heavy metals and health risk assessment in Taihu Lake

• The concentrations of 13 heavy metals in Taihu Lake were analyzed. • Aquatic vegetables intake was first included in deriving human health AWQC. • The human health AWQC for 13 heavy metals in Taihu Lake were derived. • Human health risk assessment for 13 heavy metals were conducted in Taihu Lake. Heavy metals are widely concerning because of their toxicity, persistence, non-degradation and bioaccumulation ability. Human health ambient water quality criteria (AWQC) are specific levels of chemicals that can occur in water without harming human health. At present, most countries do not consider the effects of aquatic vegetables in deriving human health AWQC. Therefore, the intake of aquatic vegetables (Brasenia schreberi) was added to the derivation of human health AWQC and a health risk assessment for 13 heavy metals in Taihu Lake. The human health AWQC (consumption of water, fish and aquatic vegetables) values of 13 heavy metals ranged from 0.04 (Cd) to 710.87 μg/L (Sn), and the intake of B. schreberi had a very significant effect on the human health AWQC for Cu, with a more than 62-fold difference. The hazard quotients of As (2.8), Cd (1.6), Cr (1.4) and Cu (4.86) were higher than the safe level (HQ= 1), indicating that As, Cd, Cr and Cu in Taihu Lake posed a significant health risk. Sensitivity analysis showed that the contribution rate of B. schreberi intake to the human health risk from Cu was 91.6%, and all results indicated that the risk of Cu in B. schreberi to human health should be of particular concern. This study adds the consideration of aquatic vegetable consumption to the traditional method of human health AWQC derivation and risk assessments for the first time, and this approach can promote the development of risk assessments and water quality criteria.     

Modification of evaluation method for auto-assessment and electronic submission by businesses

SUMMARY

This paper describes the evolution of an evaluation method developed initially to assess progress towards sustainable development for various land use activities in Costa Rica. Since that time, the method has been expanded to apply to all types of business activities in any location, and refined so that a numerical score can be provided for each attribute. These scores can then be presented graphically in four categories. The method has since been tested on a variety of businesses and is being refined for electronic submission and display of the results. The benefits of this approach, as well as its shortcomings and some of the problems resolved, are presented.     

Chemical speciation and potential ecological risk assessment of heavy metals in volcanic rocks of Southern Qinghai,China

ABSTRACT

Seven volcanic rocks samples were collected from Southern Qinghai to analyze chemical speciation and migration behavior of heavy metals by sequential chemical extraction procedure and column leaching test. The geo-accumulation index, ecological risk index and the risk assessment code were applied to assess the heavy metal pollution and potential environmental effects in this area. Results revealed that the total concentrations of heavy metals did not exceed the background values in soil of this area. Most of the samples produced acid rock drainage. The order of heavy metal migration and transformation sequence in the volcanic rocks of Zhiduo region was Cd?>?Pb?>?As?=?Cu?=?Zn?=?Mn based on the geo-accumulation index and Cd caused heavy pollution, which was also confirmed by the leaching test. Moderate potential ecological risk posed by heavy metals occurred in the study area based on the potential ecological risk index. Cd contributed to most of ecological risk while the remaining heavy metals (except As) exerted medium to high risks to the environment according to the risk assessment code evaluation results. In summary, volcanic rocks possessed potential risks to the surroundings due to potential release of heavy metals. Cd that caused the pollution should be paid special attention.