Occurrence and environmental implications of pharmaceuticals in Chinese municipal sewage sludge

The presence of pharmaceuticals in aquatic environment has become a topic of concern because of their potential adverse effects on human health and wildlife species. A total of 45 dewatered sewage sludge samples were collected throughout China and analyzed for 30 commonly consumed pharmaceutical residues. Ofloxacin was found to be the dominant contaminant with concentrations up to 24 760 μg kg⁻¹, followed by oxytetracycline (5280 μg kg⁻¹), norfloxacin (5280 μg kg⁻¹) and ketoprofen (4458 μg kg⁻¹). The concentration of pharmaceutical residues varied greatly depending on the operation conditions of wastewater treatment plants and sampling locations. Poor agreement was found between the predicted (calculation based on the annual consumption and coefficient of sludge water partition) and detected concentrations of the pharmaceuticals indicating that the occurrence of pharmaceutical residues was affected by various factors such as loading rates, sewage properties and the chemical properties such as the contribution from polar groups. National wide fate and ecotoxicity study is required for the development of control strategies.     

Determination of polycyclic aromatic hydrocarbons in urban street dust: implications for human health

The determination of sixteen polycyclic aromatic hydrocarbons in urban street dust has been done. Samples were collected from 12 sampling locations in a city centre location (Newcastle upon Tyne, north east England) and extracted using in situ pressurised fluid extraction followed by gas chromatography mass spectrometry. From the results it was possible to identify three groups, with respect to PAH concentration, with PAH contents ranging between 0.6-2.3 mg kg⁻¹, 15.6-22.5 mg kg⁻¹ and 36.1-46.0 mg kg⁻¹. The total PAH content of samples from these sampling sites has been compared to 22 urban locations around the world; comparable levels were found in these samples compared to the other cities around the world.The potential source of PAHs has been investigated by investigating the proportion of pyrogenic and petrogenic material in urban street dust using specific individual PAH ratios. The results indicate that the PAH content of urban street dust from the chosen sites are more likely to be due to pyrogenic sources i.e. vehicle exhaust emissions. The particle size fractions (<63 μm; 63-125 μm; 125-250 μm; 250-500 μm; 500-1000 μm; and 1000-2000 μm) of individual PAHs in three selected sampling sites was investigated. In two of the selected sites the PAH content was independent of particle size whereas in sampling site 10 elevated PAH levels are noted in the <63 μm size fraction. Sampling site 10 is located at the junction of three road tributaries which are used as major access points to the east of the city centre. Finally, the potential health risk for unintentional consumption of PAHs was assessed in terms of a mean daily intake (based on an ingestion rate of 100 mg d⁻¹). It was found that all 4-6 membered ring PAHs had concentrations in excess of the mean daily intake thereby reflecting a potential health risk, particularly in the smallest size particle fractions.     

Assessment of characteristic distribution of PCDD/Fs and BFRs in sludge generated at municipal and industrial wastewater treatment plants

The presence of polychlorinated dibenzo-p-dioxins and furan (PCDD/Fs) and brominated flame retardants (BFRs) in sludge generated at municipal wastewater treatment plants (MWTPs) and industrial wastewater treatment plants (IWTPs) was investigated. The concentrations of these pollutants were in the following ranges: 5.38-7947 ng kg⁻¹ dw (0.02-49.9 ng WHO-TEQ kg⁻¹ dw) for 17 PCDD/Fs, 17.5-66 761 μg kg⁻¹ dw for 27 polybrominated diphenyl ethers (PBDEs), 1.55-29 604 μg kg⁻¹ dw for hexabromocyclododecanes (HBCDs) (α-, β-, and γ-diastereomers), and 4.01-618 μg kg⁻¹ dw for tetrabromobisphenol A (TBBPA). Generally, the levels of each compound in the sewage-sludge samples were higher than those in the industrial-sludge samples with some exceptions. The characteristic distribution profiles of target compounds were observed for different types of sludge and different sources of wastewater. High-chlorinated PCDD/Fs were dominant in all samples except those from the textile industry. The distribution of the BFRs in industrial-sludge samples varied, whereas that of the BFRs in sewage-sludge samples was consistent. The proportion of penta-BDEs in sewage sludge was higher than that in industrial sludge, even though BDE-209 was the most dominant congener in all the samples. For HBCDs, the distribution of diastereomers (α-, β-, and γ-HBCD) was similar across sludge samples that had the same source of wastewater and treatment processes.     

Highly organic natural media as permeable reactive barriers: TCE partitioning and anaerobic degradation profile in eucalyptus mulch and compost

The occurrence, removal efficiency and seasonal variation of 22 antibiotics, including eight fluoroquinolones, nine sulfonamides and five macrolides, were investigated in eight sewage treatment plants (STPs) in Beijing, China. A total of 14 antibiotics were detected in wastewater samples, with the maximum concentration being 3.1 μg L⁻¹ in the influent samples and 1.2 μg L⁻¹ in the effluent samples. The most frequently detected antibiotics were ofloxacin, norfloxacin, sulfadiazine, sulfamethoxazole, erythromycin and roxithromycin; of these, the concentration of ofloxacin was the highest in most of the influent and effluent samples. Eighteen antibiotics were detected in the sludge samples, with concentrations ranging from 1.0 × 10⁻¹ to 2.1 × 10⁴ μg kg⁻¹. The dominant antibiotics found in the sludge samples were the fluoroquinolones, with ofloxacin having the highest concentration in all the sludge samples. The antibiotics could not be removed completely by the STPs, and the mean removal efficiency ranged from −34 to 72%. Of all the antibiotics, the fluoroquinolones were removed comparatively more efficiently, probably due to their adsorption to sludge. Seasonal variation of the antibiotics in the sludge samples was also studied. The concentrations of antibiotics in winter were higher than in spring and autumn. Since the total levels of the fluoroquinolones detected in the influent samples were lower than the predicted no-effect concentration (PNEC) of 8.0 μg L⁻¹, the residues of these antibiotics would be unlikely to have adverse effects on microorganisms involved in sewage treatment processes.     

Occurrence of polycyclic musks in wastewater and receiving water bodies and fate during wastewater treatment

The occurrence of cashmerane (DPMI), celestolide, phantolide, traesolide (ATII), galaxolide (HHCB) and tonalide (AHTN) in sewage and surface waters and their fate during wastewater treatment and anaerobic sludge digestion is investigated. AHTN and HHCB are the most important representatives and influent concentrations of 0.41-1.8 and 0.9-13 μg L⁻¹ are observed. DPMI is detected in influent and effluent samples but in notably lower concentrations than AHTN and HHCB. Major sources of polycyclic musks are households, whereas industrial emitters seem to be of minor importance. This conclusion is supported by the analysis of selected industrial wastewaters (metal, textile and paper industry). Specific emissions of 0.36 ± 0.19 and 1.6 ± 1.0 mg cap⁻¹ d⁻¹ for AHTN and HHCB are calculated. Overall removal efficiencies between approx 50% and more than 95% are observed during biological wastewater treatment and removal with the excess sludge is the major removal pathway. Log K_D values of 3.73-4.3 for AHTN, 3.87-4.34 for HHCB and 2.42-3.22 for DPMI are observed in secondary sludge. During sludge digestion no or only slight removal occurred. Mean polycyclic musk concentrations in digested sludge amounted to 1.9 ± 0.9 (AHTN), 14.2 ± 5.8 (HHCB), 0.8 ± 0.4 (ATII) and 0.2 ± 0.09 (DPMI) mg kg⁻¹ dry matter. In the receiving water systems a comparable distribution as during wastewater treatment is observed. AHTN, HHCB and DPMI are detected in surface waters (ND (not detected) - < 0.04, ND - 0.32 and ND - 0.02 μg L⁻¹) as well as AHTN and HHCB in sediments (ND - 20, ND - 120 μg kg⁻¹). For HHCB an apparent K_OC value of 4.1-4.4 is calculated for sediments. Major source for polycyclic musks in surface waters are discharges from wastewater treatment plants. For HHCB and DPMI 100% of the load observed in the sampled surface waters derive from discharges of treated wastewater.     

Estimation and characterization of PCDD/Fs, dl-PCBs, PCNs, HxCBz and PeCBz emissions from magnesium metallurgy facilities in China

Magnesium production is considered to be one potential source of unintentional persistent organic pollutants (unintentional POPs). However, studies on the emissions of unintentional POPs from magnesium metallurgy are still lacking. Emissions of unintentional POPs, such as polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenyls (dl-PCBs), polychlorinated naphthalenes (PCNs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz) are covered under the Stockholm Convention. In this study, these emissions were investigated through a magnesium smelting process. Stack gas and fly ash samples from a typical magnesium plant in China were collected and analyzed to estimate the emissions of unintentional POPs from magnesium metallurgy. Emissions factors of 412 ng TEQ t⁻¹ for PCDD/Fs, 18.6 ng TEQ t⁻¹ for dl-PCBs, 3329 μg t⁻¹ for PCNs, 820 μg t⁻¹ for HxCBz, and 1326 μg t⁻¹ for PeCBz were obtained in 2009. Annual emissions from magnesium metallurgy in China were estimated to be 0.46 g WHO-TEQ for PCDD/Fs and dl-PCBs, 1651 g for PCNs, 403 g for HxCBz and 653 g for PeCBz, respectively.     

Polycyclic aromatic hydrocarbons: bees, honey and pollen as sentinels for environmental chemical contaminants

Three beehive matrices, sampled in six different apiaries from West France, were analyzed for the presence of four polycyclic aromatic hydrocarbons (PAH4: benzo[a]pyrene, benzo[a]anthracene, benzo[b]fluoranthene and chrysene). Samples were collected during four different periods in both 2008 and 2009. Honey samples showed the lowest levels of PAH4 contamination (min = 0.03 μg kg⁻¹; max = 5.80 μg kg⁻¹; mean = 0.82 μg kg⁻¹; Sd = 1.17). Bee samples exhibited higher levels of PAH4 contamination (min = 0.32 μg kg⁻¹; max = 73.83 μg kg⁻¹; mean = 7.03 μg kg⁻¹; Sd = 17.83) with a great dispersion of the concentrations due to four main events of high concentrations. Pollen samples showed only one major episode with the highest PAH4 concentration found (min = 0.33 μg kg⁻¹; max = 129.41 μg kg⁻¹; mean = 7.10 μg kg⁻¹; Sd = 22.28). The PAH4 concentrations found were significantly influenced by the landscape context for all beehive samples.     

Assessment of fates of estrogens in wastewater and sludge from various types of wastewater treatment plants

We measured five estrogens in the wastewater samples from the municipal wastewater treatment plants (M-WWTPs), livestock wastewater treatment plants (L-WWTPs), hospital WWTPs (H-WWTPs) and pharmaceutical manufacture WWTPs (P-WWTPs) in Korea. The L-WWTPs showed the highest total concentration (0.195-10.4 μg L⁻¹) of estrogens in the influents, followed by the M-WWTPs (0.028-1.15 μg L⁻¹), H-WWTPs (0.068-0.130 μg L⁻¹) and P-WWTPs (0.015-0.070 μg L⁻¹). Like the influents, the L-WWTPs (0.003-0.729 μg L⁻¹) and the M-WWTPs (0.001-0.299 μg L⁻¹) also showed higher total concentration of estrogens in the effluents than the H-WWTPs (0.002-0.021 μg L⁻¹) and P-WWTPs (0.011 μg L⁻¹ in one sample). The L-WWTPs (37.5-543 μg kg⁻¹, dry weight) showed higher total concentrations in sludge than the M-WWTPs (3.16-444 μg kg⁻¹, dry weight) like the wastewater. The distribution of estrogens in the WWTPs may be affected by their metabolism in the human body, their transition through biological treatment processes, and their usage for livestock growth. Unlike the concentration results, the daily loads of estrogens from the M-WWTPs were the highest, which is related to the high capacities of WWTPs.     

Occurrence of multiclass UV filters in treated sewage sludge from wastewater treatment plants

Many substances related to human activities end up in wastewater and accumulate in sewage sludge. So far, there is only one extensive survey on the occurrence of UV filter residues in sewage sludge. However, more data are required to draw a reliable picture of the fate and effects of these compounds in the environment. This study attempts to fill this gap through the determination of selected UV filters and derivatives namely 4-methylbenzylidenecamphor, benzophenone-3, octocrylene, ethylhexylmethoxycinnamate, ethylhexyldimethyl PABA, 4-hydroxybenzophenone, 2,4-dihydroxybenzophenone, and 4,4′-dihydroxybenzophenone in treated sewage sludge.The target compounds were extracted using pressurized liquid extraction and after this, determined by ultra high resolution liquid chromatography-tandem mass spectrometry. The determination was fast and sensitive, affording limits of detection lower than 19 ng g⁻¹ dry weight (dw) except for 2,4-dihydroxybenzophenone (60 ng g⁻¹ dw). Good recovery rates, especially given the high complexity of sludge matrix (between 70% and 102% except for 2,4-dihydroxybenzophenone (30%)) were achieved.The application of developed method allowed reporting for the first time the occurrence of two major degradation products of benzophenone-3 that have estrogenic activity in sewage sludge: 4,4′-dihydroxybenzophenone (in 5/15 WWTPs) and 4-hydroxybenzophenone (in 1/15 WWTPs). Results revealed the presence of UV filters in 15 wastewater treatment plants in Catalonia (Spain) at concentrations ranging from 0.04 to 9.17 μg g⁻¹ dw.     

Effect of land use change from paddy to vegetable field on the residues of organochlorine pesticides in soils

The effect of land use change from paddy to vegetable field on the residues of organochlorine pesticides (OCPs) was investigated. Soil residues of OCPs were analyzed in vegetable fields which had been converted from paddy fields for 0, 5, 10, 15, 20, 30, 50 year in Yixing, China in 2003. The mean concentrations of OCPs followed a sequence of: ∑DDTs (13.7 μg kg⁻¹) > ∑HCHs (8.6 μg kg⁻¹) > > HCB (2.09 μg kg⁻¹) > α-endosulfan (1.30 μg kg⁻¹) > endrin (1.08 μg kg⁻¹) > PCNB (0.76 μg kg⁻¹) > dieldrin (0.58 μg kg⁻¹). The mean residues of OCPs especially DDTs increased significantly with vegetable planting time after land use change in the first 15 years, then decreased from 20 to 30 years and increased a little afterward. The time under anaerobic and aerobic conditions was suggested to control mainly the change of the residues of OCPs.     

Fate of radiocesium in sewage treatment process released by the nuclear accident at Fukushima

The nuclear accident at the Fukushima Daiichi Nuclear Power Plant (FDNPP) which occurred after the Great East Japan Earthquake on March 11, 2011 resulted in releases of radionuclides such as ¹³⁴Cs (half-life:T_1/2 = 2.06 yr), ¹³⁷Cs (T_1/2 = 30.04 yr) and ¹³¹I (T_1/2 = 8.05 d) to the environment. For this paper, we observed the monthly variations of radiocesium (¹³⁴Cs and ¹³⁷Cs) and stable Cs concentrations in influent, effluent, sewage sludge, and sludge ash collected from a sewage treatment plant 280 km north of the FDNPP from July to December, 2011. Using the stable Cs results, we concluded the mass balance of Cs in the sewage treatment plant showed that about 10% of the Cs entering the sewage treatment plant would be transferred to the sewage sludge, and then Cs in the sewage sludge was totally recovered in the sludge ash. The behavior of Cs was similar to that of Rb, but it was not similar to that of K in the sewage treatment process.     

Estimation of daily intake of potentially toxic elements from urban street dust and the role of oral bioaccessibility testing

The pseudo-total and oral bioaccessible concentration of six potentially toxic elements (PTEs) in urban street dust was investigated. Typical pseudo-total concentrations across the sampling sites ranged from 4.4 to 8.6 mg kg⁻¹ for As, 0.2-3.6 mg kg⁻¹ for Cd, 25-217 mg kg⁻¹ for Cu, 14-46 mg kg⁻¹ for Ni, 70-4261 mg kg⁻¹ for Pb, and, 111-652 mg kg⁻¹ for Zn. This data compared favourably with other urban street dust samples collected and analysed in a variety of cities globally; the exception was the high level of Pb determined in a specific sample in this study. The oral bioaccessibility of PTEs in street dust is also assessed using in vitro gastrointestinal extraction (Unified Bioaccessibility Method, UBM). Based on a worst case scenario the oral bioaccessibility data estimated that Cd and Zn had the highest % bioaccessible fractions (median >45%) while the other PTEs i.e. As, Cu, Ni and Pb had lower % bioaccessible fractions (median <35%). The pseudo-total and bioaccessible concentrations of PTEs in the samples has been compared to estimated tolerable daily intake values based on unintentional soil/dust consumption. Cadmium, Cu and Ni are well within the oral tolerable daily intake rates. With respect to As and Pb, only the latter exceeds the TDI_oral if we model ingestion rate based on atmospheric ‘dustiness’ rather than the US EPA (2008) unintentional soil/dust consumption rate of 100 mg d⁻¹. We consider it unlikely that even a child with pica tendencies would ingest as much as 100 mg soil/dust during a daily visit to the city centre, and in particular to the sites with elevated Pb concentrations observed in this study.     

Influences of influent carbon source on extracellular polymeric substances (EPS) and physicochemical properties of activated sludge

It is necessary to understand the bioflocculation, settling and dewatering characteristics in the activated sludge process in order to establish more efficient operational strategies. The influences of carbon source on the extracellular polymeric substances (EPS) and flocculation, settling and dewatering properties of the activated sludge were investigated. Laboratory-scale completely mixed activated sludge processes were used to grow the activated sludge with different carbon sources of starch, glucose and sodium acetate. The sludge fed with acetate had highest loosely bound EPS (LB-EPS) and that fed with starch lowest. The amount of tightly bound EPS (TB-EPS), protein content in LB-EPS, polysaccharide content and protein contents in TB-EPS, were independent of the influent carbon source. The polysaccharide content in LB-EPS of the activated sludge fed with sodium acetate was lower slightly than those of starch and glucose. The sludge also had a nearly consistent flocs size and the sludge volume index (SVI) value. ESS content of the sludge fed with sodium acetate was higher initially, although it was similar to those fed with glucose and starch finally. However, the specific resistance to filtration and normalized capillary suction time fluctuated first, but finally were stable at around 5.0 × 10⁸ m kg⁻¹ and 3.5 s L g⁻¹ SS, respectively. Only the protein content in LB-EPS weakly correlated with the flocs size and SVI of the activated sludge. But there was no correlation between any other EPS contents or components and the physicochemical properties of the activated sludge.     

Persistence of C-labeled atrazine and its residues in a field lysimeter soil after 22 years

Twenty-two years after the last application of ring-¹⁴C-labeled atrazine at customary rate (1.7 kg ha⁻¹) on an agriculturally used outdoor lysimeter, atrazine is still detectable by means of accelerated solvent extraction and LC-MS/MS analysis. Extractions of the 0-10 cm soil layer yielded 60% of the residual ¹⁴C-activity. The extracts contained atrazine (1.0 μg kg⁻¹) and 2-hydroxy-atrazine (42.5 μg kg⁻¹). Extractions of the material of the lowest layer 55-60 cm consisting of fine gravel yielded 93% of residual ¹⁴C-activity, of which 3.4 μg kg⁻¹ was detected as atrazine and 17.7 μg kg⁻¹ was 2-hydroxy-atrazine. The detection of atrazine in the lowest layer was of almost four times higher mass than in the upper soil layer. These findings highlight the fact that atrazine is unexpectedly persistent in soil. The overall persistence of atrazine in the environment might represent a potential risk for successive groundwater contamination by leaching even after 22 years of environmental exposure.     

Occurrence of antibiotics in water, sediments, aquatic plants, and animals from Baiyangdian Lake in North China

This study investigated the presence and distribution of 22 antibiotics, including eight quinolones, nine sulfonamides and five macrolides, in the water, sediments, and biota samples from Baiyangdian Lake, China. A total of 132 samples were collected in 2008 and 2010, and laboratory analyses revealed that antibiotics were widely distributed in the lake. Sulfonamides were the dominant antibiotics in the water (0.86-1563 ng L⁻¹), while quinolones were prominent in sediments (65.5-1166 μg kg⁻¹) and aquatic plants (8.37-6532 μg kg⁻¹). Quinolones (17.8-167 μg kg⁻¹) and macrolides [from below detection limit (BDL) to 182 μg kg⁻¹] were often found in aquatic animals and birds. Salvinia natans exhibited the highest bioaccumulation capability for quinolones among three species of aquatic plants. Geographical differences of antibiotic concentrations were greatly due to anthropogenic activities. Sewage discharged from Baoding City was likely the main source of antibiotics in the lake. Risk assessment of antibiotics on aquatic organisms suggested that algae and aquatic plants might be at risk in surface water, while animals were likely not at risk.     

Conditioning of sewage sludge by Fenton's reagent combined with skeleton builders

Physical conditioners, often known as skeleton builders, are commonly used to improve the dewaterability of sewage sludge. This study evaluated a novel joint usage of Fenton’s reagent and skeleton builders, referred to as the F-S inorganic composite conditioner, focusing on their efficacies and the optimization of the major operational parameters. The results demonstrate that the F-S composite conditioner for conditioning sewage sludge is a viable alternative to conventional organic polymers, especially when ordinary Portland cement (OPC) and lime are used as the skeleton builders. Experimental investigations confirmed that Fenton reaction required sufficient time (80 min in this study) to degrade organics in the sludge. The optimal condition of this process was at pH = 5, Fe²⁺ = 40 mg g⁻¹ (dry solids), H₂O₂ = 32 mg g⁻¹, OPC = 300 mg g⁻¹ and lime = 400 mg g⁻¹, in which the specific resistance to filtration reduction efficiency of 95% was achieved.     

Direct and indirect impact of sewage sludge compost spreading on Quercus coccifera monoterpene emissions in a Mediterranean shrubland

Monoterpene emissions of Quercus coccifera L. were repeatedly measured during the two years following the spreading of a sewage sludge compost at rates of 50 Mg ha⁻¹ and 100 Mg ha⁻¹, in a twelve-year-old post-fire Mediterranean shrubland. We also monitored the patterns of change in soil and leaf nutrient content, plant water potential, chlorophyll fluorescence, and plant growth. Compost spreading resulted in weak changes in leaf nutrient content and plant water status, and therefore no significant effect on monoterpene emissions at leaf scale, except during one summer sampling, probably related to advanced leaf maturity with the highest compost rate. However, compost increased plant growth, particularly the leaf biomass. The results suggest that compost spreading in Mediterranean shrublands has no strong short-term effect on Q. coccifera monoterpene emissions at leaf level, but may indirectly increase volatile organic compound fluxes at the stand scale, which may contribute to regional ozone pollution.     

The arrival and discharge of conjugated estrogens from a range of different sewage treatment plants in the UK

The occurrence of free and conjugated estrogens was examined in a survey of eleven sewage treatment plants (STPs) and their discharge water in the United Kingdom using grab sampling. The STPs included trickling filter with and without tertiary treatment, and activated sludge with tertiary treatment. For three activated sludge plants both influent and effluent samples were compared. For a further 8 STPs only the effluent was examined. The estrone-3-sulphate, estradiol-3-sulphate and estriol-3-sulphate concentrations (up to 20 ng L⁻¹) were typically 5-fold that of the respective free estrogen concentration in the effluents. This represents a substantial additional ‘potential’ estrogen load arriving in the receiving waters. Estrone-3-glucuronide was found at 9 ng L⁻¹, estradiol-3-glucuronide at 7 ng L⁻¹, and estriol-3-glucuronide at 32 ng L⁻¹ in sewage influent. Except on one occasion, no glucuronide conjugates could be found in the effluent. The results suggest in most cases glucuronide conjugates will be completely transformed in sewage treatment whilst sulphate conjugates will only be partially removed.     

Assessment of human exposure to benzene through foods from the Belgian market

Benzene is a volatile organic compound known to be carcinogenic to humans (Group 1) and may be present in food. In the present study, 455 food samples from the Belgian market were analyzed for benzene contents and some possible sources of its occurrence in the foodstuffs were evaluated. Benzene was found above the level of detection in 58% of analyzed samples with the highest contents found in processed foods such as smoked and canned fish, and foods which contained these as ingredients (up to 76.21 μg kg⁻¹). Unprocessed foods such as raw meat, fish, and eggs contained much lower concentrations of benzene. Using the benzene concentrations in food, a quantitative dietary exposure assessment of benzene intake was conducted on a national representative sample of the Belgian population over 15 years of age. The mean benzene intake for all foods was 0.020 μg kg bw d⁻¹ according to a probabilistic analysis. These values are below the minimum risk level for oral chronic exposure to benzene (0.5 μg kg bw d⁻¹).     

Comparison of concentrations of mercury in ambient air to its accumulation by leafy vegetables: An important step in terrestrial food chain analysis

A biomonitoring network with leafy vegetables was established near a chlor-alkali plant in order to compare the accumulation of mercury to the atmospheric total gaseous mercury (TGM) concentration. Based on data obtained in the reference area the ‘normal’ mercury concentration in vegetables is between 0.6 and 5.4 μg kg⁻¹ FW. The effect detection limits (EDLs) are between 1.2 and 11.0 μg kg⁻¹ FW and the biological detection limits (BDLs), the lowest [TGM] that can be detected significantly, are between 3 and 4 ng m⁻³. The accumulation rate is lowest for lettuce and high for curly kale that proved to be an excellent accumulator and as such it is very useful for biomonitoring purposes. A comparison made in the 1980s between biomonitoring results with grass and the mercury concentration in leafy vegetables from private gardens nearby proved to be valid when applied to the current biomonitoring results with vegetables.