Combined application of marble waste and beneficial microorganisms: toward a cost-effective approach for restoration of heavy metals contaminated sites

Environmental Science and Pollution Research - Heavy metal (HM) pollution and the need to preserve the environment have gathered increasing scientific attention. The immobilization of HMs into...     

Energy crop as an environmentally sustainable reclamation option for post-mining sites: a life cycle assessment of cassava planting in Vietnam

Environmental Science and Pollution Research - Using post-mining areas for planting energy crops has emerged as a promising and sustainable reclamation solution due to its potential contributions...     

Validation of an ecosystem modelling approach as a tool for ecological effect assessments

In ecotoxicology, derivation of a "safe" environmental concentration is usually achieved by the use of extrapolation factors or by statistical extrapolation from a set of single species toxicity data. These approaches ignore ecological interactions between species in the field. An ecology-based alternative to this pragmatic approach can be ecosystem modelling, which can account for ecological interactions. However, it is largely unexplored how well the predictions of these models quantitatively agree with large-scale experimental studies. Therefore, we evaluated the capacity of a flexible ecosystem model to predict population and ecosystem-level no observed effect concentrations (NOECs) of 7 organic toxicants. These NOECs were compared with population and ecosystem-NOECs observed in 11 micro- and mesocosm studies. For each of the latter studies, the model was customized to account for the specific ecological interactions within these systems and combined with appropriate single-species toxicity data from literature. Population-NOEC predictions were accurate, or at least protective, for 60, and 85% of all considered model populations, respectively. For all 11 studies, a protective ecosystem-NOEC could be derived, being accurate in 7 cases, and conservative in 4 cases. In general, it can be stated that this type of models can serve as an ecology-based alternative to current extrapolation techniques in EEAs and water quality standard setting.     

Graphene oxide as a tool for antibiotic-resistant gene removal: a review

Environmental pollutants, including antibiotics (ATBs), have become an increasingly common health hazard in the last several decades. Overdose and abuse of ATBs led to the emergence of antibiotic-resistant genes (ARGs), which represent a serious health threat. Moreover, water bodies and reservoirs are places where a wide range of bacterial species with ARGs originate, owing to the strong selective pressure from presence of ATB residues. In this regard, graphene oxide (GO) has been utilised in several fields including remediation of the environment. In this review, we present a brief overview of resistant genes of frequently used ATBs, their occurrence in the environment and their behaviour. Further, we discussed the factors influencing the binding of nucleic acids and the response of ARGs to GO, including the presence of salts in the water environment or water pH, because of intrinsic properties of GO of not only binding to nucleic acids but also catalysing their decomposition. This would be helpful in designing new types of water treatment facilities.

     

Thermoluminescence as a tool for monitoring ozone-stressed plants

The effect of ozone (6 h, various concentrations from 0 to 350 ppb) on barley (Hordeum vulgare L., cv. Bomi) and tomato (Lycopersicon esculentum L., cv. Yellow Cherry) leaves was investigated in parallel by thermoluminescence (TL) and fluorescence (FL) methods. Several significant changes were found in TL glow curves measured after excitation by one single turnover flash at +2 degree C in the temperature range from 2 to 170 degree C immediately after ozone exposure. Contrary to TL, ozone induced only negligible changes in FL parameters F0, FM and Fv/FM. Measurements done 24 h after ozone exposure showed partial recovery of ozone-induced changes. The extent of recovery was not the same in different parts of TL curves. Fluorescence parameters were not significantly changed. The results demonstrate that TL parameters are more sensitive to ozone than conventially used FL parameters F0, FM and Fv/FM. Moreover, TL measurements seem to give information not only about the PSII electron transport, but also about the extent of oxidative damage and membrane lipid peroxidation. It is concluded, that TL can be a highly informative tool for monitoring the impact of ozone on plants.     

Geostatistics as a validation tool for setting ozone standards for durum wheat

Which is the best standard for protecting plants from ozone? To answer this question, we must validate the standards by testing biological responses vs. ambient data in the field. A validation is missing for European and USA standards, because the networks for ozone, meteorology and plant responses are spatially independent. We proposed geostatistics as validation tool, and used durum wheat in central Italy as a test. The standards summarized ozone impact on yield better than hourly averages. Although USA criteria explained ozone-induced yield losses better than European criteria, USA legal level (75 ppb) protected only 39% of sites. European exposure-based standards protected ≥90%. Reducing the USA level to the Canadian 65 ppb or using W126 protected 91% and 97%, respectively. For a no-threshold accumulated stomatal flux, 22 mmol m⁻² was suggested to protect 97% of sites. In a multiple regression, precipitation explained 22% and ozone explained <0.9% of yield variability.     

Cost-benefit analysis as a tool for decision making in environmental projects

BACKGROUND, AIM AND SCOPE: The Damage-Function method is an efficient tool recently used in decision-making processes concerning environmental management. It is based on finding the relation between the origin of an environmental charge, and its impact on human health and the environment. The aim of the present investigation was to assess the positive impacts, also called benefits, of changes in environmental quality, and the economic viability of an industrial project on reduction of PCDD/F emissions. It has been developed with monetary criteria of two worldwide ambits: USA and European-Union countries. METHODS: The current study is a continuation of a previous investigation in which Substance Flow Analysis and Control Analysis Techniques were used to identify and to analyze all main flow values of PCDD/Fs inside the system of Tarragona Province (Spain). In the present study, Cost-Benefit Analysis (CBA) has been employed. The benefits derived from a minimization in the incidence of cancer due to a reduction in the emission of PCDD/Fs have been evaluated considering the value of a statistically saved life (VSL). Statistical analysis about uncertainty has also been incorporated. Here, the Monte Carlo simulation technique has been used. RESULTS: It is shown that CBS results depend firstly on the kind of VSL used. In fact, the differences between the decisions as a result of applying monetary criteria in USA and EU can be explained by differences between VSL values. CONCLUSION AND RECOMMENDATION: It is concluded that, for prices estimated in Euros, the emission cleaning project in the industrial plant is not feasible under any circumstance. However, although CBA seems to be a good analytical method, the final decision corresponds to the managers, who must weigh up not only the monetary criteria, but factors such as social questions.     

Yard waste compost as a stormwater protection treatment for construction sites.

Runoff water quality improvement from three yard waste compost erosion control treatments were compared with two conventional treatments and an untreated control on plots of 3:1 slope during two growing seasons, using natural events and simulated rainfall. Runoff volume, suspended solids, nutrients, biomass, turf shear strength, and turfgrass color scale were monitored. The most effective compost treatment, a 5-cm thick blown compost blanket, produced 12.7 times less runoff and 9.8 times less sediment load than a straw mat and silt fence treatment. The compost treatments generated eight times more biomass than the straw mat treatments. Root development was significantly better on the compost treatments based on turf shear strength measurements. Tilled-in compost was not as effective as a compost blanket at reducing sediment loss, particularly before the establishment of grass on the plot. The cost of compost treatments was similar to that of straw mat with silt fence treatments.     

SMFC as a tool for the removal of hydrocarbons and metals in the marine environment: a concise research update

Environmental Science and Pollution Research - Marine pollution is becoming more and more serious, especially in coastal areas. Because of the sequestration and consequent accumulation of...     

Public participation in municipal planning as a tool for coastal management: case studies from western Sweden

This article analyses four main models of participation in Swedish natural resource management and assesses strengths and weaknesses of one model (participation in physical/spatial planning) based on empirical studies of coastal resource conflicts in two Swedish west coast municipalities. In comparison to other administrative and planning procedures, physical planning offers possibilities to coordinate land and water management across sectors and resources and to broaden stakeholder participation. Local influence on coastal management increases with participation beyond the statutory minimum requirements, although management frameworks and practice of participation need to be developed further. Besides educating professionals and experimenting with combinations of existing procedures, in the long run an adaptation of legislation to the requirements of integrated and sustainable coastal management will be necessary.     

Exotic gene expression in transgenic plants as a tool for monitoring environmental pollution

Environmental monitoring can benefit from the application of molecular and biochemical techniques as biomarkers. In principle, molecular biomarkers may have some advantage over more classical, organismal level markers because of their sensitivity, efficiency and reproducibility. Nevertheless, some disadvantages such as the cost, resource requirements and lack of specificity have limited their widespread use. Molecular genetics and recombinant DNA technologies, however, allow to improve simplicity and cost, together with reliability, efficiency and sensitivity, of molecular biomarkers. The stress inducible promoter of the barley gene Hvhspl7, which is induced by a number of environmental stress (including some heavy metals), has been fused to the reporter gene GUS in a plasmid. This plasmid was used for stable transformation of tobacco. Some of the transgenic plants obtained after selection showed enhanced GUS expression after exposure to some heavy metals. Maintenance of the plants for three generations, and the analysis of the response to treatments, suggest that these transgenic plants may be utilised as an affordable biomarker for monitoring heavy metal pollution.     

Using a probabilistic approach in an ecological risk assessment simulation tool: test case for depleted uranium (DU)

A probabilistic approach was applied in an ecological risk assessment (ERA) to characterize risk and address uncertainty employing Monte Carlo simulations for assessing parameter and risk probabilistic distributions. This simulation tool (ERA) includes a Window's based interface, an interactive and modifiable database management system (DBMS) that addresses a food web at trophic levels, and a comprehensive evaluation of exposure pathways. To illustrate this model, ecological risks from depleted uranium (DU) exposure at the US Army Yuma Proving Ground (YPG) and Aberdeen Proving Ground (APG) were assessed and characterized. Probabilistic distributions showed that at YPG, a reduction in plant root weight is considered likely to occur (98% likelihood) from exposure to DU; for most terrestrial animals, likelihood for adverse reproduction effects ranges from 0.1% to 44%. However, for the lesser long-nosed bat, the effects are expected to occur (>99% likelihood) through the reduction in size and weight of offspring. Based on available DU data for the firing range at APG, DU uptake will not likely affect survival of aquatic plants and animals (<0.1% likelihood). Based on field and laboratory studies conducted at APG and YPG on pocket mice, kangaroo rat, white-throated woodrat, deer, and milfoil, body burden concentrations observed fall into the distributions simulated at both sites.     

A pragmatic approach for estimation of source-zone emissions at LNAPL contaminated sites

When considering natural attenuation as a remediation strategy at a site contaminated by a light non-aqueous phase liquid (LNAPL), it is important to consider the emission of contaminants from the source zone. A quantification of source-zone emissions is essential both for comparison with down-gradient mass fluxes to provide an estimate of fractional mass flux reduction, as well as for estimating the source lifetime. Because the spatial distribution of LNAPL at a field site is strongly dependent on both the spill circumstances and the heterogeneity of the geologic materials, which can be problematic for in-situ determination, alternative methods for estimating source-zone emissions are needed. In this work, a three-dimensional multiphase flow and transport modelling approach is used to investigate the relationship between the lateral extent of an LNAPL body and the emission of contaminants to groundwater at a contaminated site. For simulations involving an LNAPL release in an aquifer comprised of heterogeneous porosity and permeability distributions that were generated geostatistically, it is shown that a simple linear relationship exists between the lateral extent of the LNAPL body in the capillary fringe and the emission to the aqueous phase. The parameters describing the relationship are found to be linear functions of the groundwater flow velocity and the vertical infiltration rate. This site-specific relationship provides a simple method to estimate contaminant emissions to groundwater at LNAPL contaminated sites.     

Water safety plans as a tool for drinking water regulatory frameworks in Arctic communities

Arctic communities often face drinking water supply challenges that are unique to their location. Consequently, conventional drinking water regulatory strategies often do not meet the needs of these communities. A literature review of Arctic jurisdictions was conducted to evaluate the current water management approaches and how these techniques could be applied to the territory of Nunavut in Canada. The countries included are all members of the Arctic Council and other Canadian jurisdictions considered important to the understanding of water management for Northern Canadian communities. The communities in Nunavut face many challenges in delivering safe water to customers due to remoteness, small community size and therefore staffing constraints, lack of guidelines and monitoring procedures specific to Nunavut, and water treatment and distribution systems that are vastly different than those used in southern communities. Water safety plans were explored as an alternative to water quality regulations as recent case studies have demonstrated the utility of this risk management tool, especially in the context of small communities. Iceland and Alberta both currently have regulated water safety plans (WSPs) and were examined to understand shortcomings and benefits if WSPs were to be applied as a possible strategy in Nunavut. Finally, this study discusses specific considerations that are necessary should a WSP approach be applied in Nunavut.     

The Kitchen Factory: a training tool for Cleaner Production

Successful integration of Cleaner Production concepts and technologies into businesses and industries requires effective education and training of the professionals. Cleaner Production, in spite of its conceptual simplicity, implies a new way of thinking about processes and products and a more sustainable approach to problem solving. Teaching university students about Cleaner Production is particularly challenging because many concepts depend on tools and experiences that are difficult to recreate in the typical classroom. Full understanding of the methodology and concepts of a Cleaner Production assessment can be achieved only by engaging students in practical application. To overcome the difficulties of providing a high number of students with a practical application, a very simple and useful exercise, based on the activities performed in the average kitchen, has been developed. The kitchen at home has all the elements of a factory, is available to everybody and can be used to supplement the theory provided in the classroom     

Dispersion modelling: a tool for local air quality management

A local air quality management system, and the use of dispersion modelling as a tool for the system, are described. The Turkish town of Gehze is used as a model.