Use of passive sampling devices for monitoring and compliance checking of POP concentrations in water

Background

The state of the art of passive water sampling of (nonpolar) organic contaminants is presented. Its suitability for regulatory monitoring is discussed, with an emphasis on the information yielded by passive sampling devices (PSDs), their relevance and associated uncertainties. Almost all persistent organic pollutants (POPs) targeted by the Stockholm Convention are nonpolar or weakly polar, hydrophobic substances, making them ideal targets for sampling in water using PSDs. Widely used nonpolar PSDs include semi-permeable membrane devices, low-density polyethylene and silicone rubber.

Results and discussion

The inter-laboratory variation of equilibrium partition constants between PSD and water is mostly 0.2?C0.5 log units, depending on the exact matrix used. The sampling rate of PSDs is best determined by using performance reference compounds during field deployment. The major advantage of PSDs over alternative matrices applicable in trend monitoring (e.g. sediments or biota) is that the various sources of variance including analytical variance and natural environmental variance can be much better controlled, which in turn results in a reduction of the number of analysed samples required to obtain results with comparable statistical power.

Conclusion

Compliance checking with regulatory limits and analysis of temporal and spatial contaminant trends are two possible fields of application. In contrast to the established use of nonpolar PSDs, polar samplers are insufficiently understood, but research is in progress to develop PSDs for the quantitative assessment of polar waterborne contaminants. In summary, PSD-based monitoring is a mature technique for the measurement of aqueous concentrations of apolar POPs, with a well-defined accuracy and precision.     

Fate of selected pharmaceuticals in river waters

The aqueous environmental fate of two antibiotics, lincomycin and clarithromycin, and an antiepileptic drug, carbamazepine, was investigated by monitoring drugs decomposition and identifying intermediates in Po river water (North Italy). Initially, control experiments in the dark and under illumination were performed on river water spiked with drugs to simulate all possible transformation processes occurring in the aquatic system. Under illumination, these pharmaceuticals were degraded and transformed into numerous organic intermediate compounds. Several species were formed and characterised by analysing MS and MS ⁿ spectra and by comparison with parent molecule fragmentation pathways. River water was sampled at three sampling points in an urban area. The selected pharmaceuticals were detected in all samples. Eight transformation products identified in the laboratory simulation were found in natural river water from carbamazepine degradation, three from clarithromycin and two from lincomycin. Their transformation occurring in aquatic system mainly involved mono- and poly-hydroxylation followed by oxidation of the hydroxyl groups.     

The occurrence of illicit and therapeutic pharmaceuticals in wastewater effluent and surface waters in Nebraska

The occurrence and estimated concentration of twenty illicit and therapeutic pharmaceuticals and metabolites in surface waters influenced by wastewater treatment plant (WWTP) discharge and in wastewater effluents in Nebraska were determined using Polar Organic Chemical Integrative Samplers (POCIS). Samplers were installed in rivers upstream and downstream of treated WWTP discharge at four sites and in a discharge canal at a fifth location. Based on differences in estimated concentrations determined from pharmaceuticals recovered from POCIS, WWTP effluent was found to be a significant source of pharmaceutical loading to the receiving waters. Effluents from WWTPs with trickling filters or trickling filters in parallel with activated sludge resulted in the highest observed in-stream pharmaceutical concentrations. Azithromycin, caffeine, 1,7-dimethylzanthine, carbamazepine, cotinine, DEET, diphenhydramine, and sulfamethazine were detected at all locations. Methamphetamine, an illicit pharmaceutical, was detected at all but one of the sampling locations, representing only the second report of methamphetamine detected in WWTP effluent and in streams impacted by WWTP effluent.     

Disinfection by-products in Finnish drinking waters

Disinfection by-products (DBPs) were measured in plant effluents of 35 Finnish waterworks, which utilized different treatment processes and raw water sources. DBPs were measured also from the distribution systems of three waterworks. Di- and trichloroacetic acids, and chloroform were the major DBPs found in treated water samples. The concentration of six haloacetic acids (HAA6) exceeded the concentrations of trihalomethanes (THMs). Chlorinated drinking waters (DWs) originating from surface waters contained the highest concentration of HAA6 and THMs: 108 and 26 microg/l, respectively. The lowest concentrations of DBPs were measured from ozonated and/or activated carbon filtrated and chloraminated DWs. Higher concentrations of HAA6, THMs, and adsorbable organic halogens were measured in summer compared to winter. The levels of chlorinated acetic acids, chloroform, and bromodichloromethane correlated positively with mutagenicity. Past mutagenicity levels of DWs were examined. A major reduction in the use of prechlorination, increased use of chloramine disinfection, and better removal of organic carbon were the most important reasons for the 69% decrease in mutagenicity from 1985 to 1994.     

Field validation of an active sampling cartridge as a passive sampler for long-term carbonyl monitoring

A carbonyl sampler originally designed for the active sampling method (Sep-Pak XPoSure) was used for long-term passive sampling, and its applicability as a passive sampler was examined through field experiments. The uptake rates of passive sampling were determined experimentally from collocated passive and active samplings for various sampling periods. The obtained uptake rates of formaldehyde, acetaldehyde, and acetone were 1.48, 1.23, and 1.08 mL/min, respectively. These uptake rates were consistent for a wide range of the sampling term (12 hr-2 weeks). Uptake rates of each carbonyl were proportional to the diffusion coefficients of each. Therefore, the ratios of diffusion coefficients were used to calculate the uptake rates of carbonyls for which the rates were not determined experimentally. Lower limits of determination were 2.16-17.5 microg/m3 for 2-week sampling. It was confirmed that 2-week monitoring of carbonyl concentrations up to 118-229 microg/m3 was possible. Relative standard deviations of the passive method generated from the repeatability test were 2-12.3% error for five samplings, and the recovery efficiencies were larger than 90%. Thus, the passive sampler was found to be highly suitable for long-term monitoring of carbonyl compounds.     

Calibration of the Chemcatcher passive sampler for monitoring selected polar and semi-polar pesticides in surface water

Passive sampling is a powerful method for continuous pollution monitoring, but calibration experiments are still needed to generate sampling rates in order to estimate water concentrations for polar compounds. We calibrated the Chemcatcher device with an uncovered SDB-XC Empore disk as receiving phase for 12 polar and semi-polar pesticides in aquatic environments in flow-through tank experiments at two water flow velocities (0.135 m/s and 0.4 m/s). In the 14-day period of exposure the uptake of test substances in the sampler remained linear, and all derived sampling rates R(s) were in the range of 0.1 to 0.5 L/day. By additionally monitoring the release of two preloaded polar pesticides from the SDB-XC disks over time, very high variation in release kinetics was found, which calls into question the applicability of performance reference compounds. Our study expands the applicability of the Chemcatcher for monitoring trace concentrations of pesticides with frequent occurrence in water.     

Calibration and field application of a solvent-based cellulose membrane passive sampling device for the monitoring of polar herbicides

A passive sampler device selective for hydrophilic analytes was constructed from cellulose membrane (40microm thickness) pre-stained with ruthenium red for 96-168h to impede degradation of the cellulose. The sampling device consisted of pre-stained cellulose membrane tubing containing a binary mixture of the solvents 1-dodecanol and 2,2,4-trimethylpentane as the sequestering medium. A laboratory flow-through system was used to investigate the rates of uptake of herbicides into the solvent mixture of the device and their release. The target herbicides were diuron, atrazine, metolachlor and molinate. Uptake of the herbicides into the solvent mixture of the cellulose membrane device was linear for up to 22 days, and daily sampling rates were determined. Release half-lives from the solvent mixture of the sampling device varied from 14 days for diuron, 15 days for atrazine, 84 days for metolachlor and 28 days for molinate. A field study was undertaken to determine if herbicide concentrations in agricultural drainage water derived from the passive sampler devices deployed for periods from 7 to 22 days, using the laboratory-derived sampling rates, would compare closely with time-weighted average herbicide concentrations determined from extractions of daily composite water samples. The concentrations of diuron, atrazine, metolachlor and molinate determined using the cellulose membrane devices were within twofold of the cumulated mean of the daily drainage water extractions.     

Trends of organochlorine compounds in Finnish inland waters

Caged common lake mussels (Anodonta piscinalis) have been used in the monitoring of organochlorine compounds in pulp and paper mill recipient watercourses of Finland annually from 1984 to 1998. Statistically significant decreasing trends of chlorophenols and chloroguaiacols originating from chlorobleaching were observed in all recipients in parallel with the decreasing discharges from the mills. Metabolites of chlorophenols, chloroanisoles and chloroveratroles had no or slightly increasing trends. Elevated PCB concentrations were measured in four watercourses. In two areas, PCBs were found to be significantly increasing, in two other cases they showed no trend. A mill producing recycled paper was apparently responsible for an increase of PCBs and DDE in recipient watercourses. Overall decreases were observed for other chlorohydrocarbons except for DDT. Material flows of chlorohydrocarbons were positively correlated with waterflows (Q) in some cases.     

Pilot monitoring study of ibuprofen in surface waters of north of Portugal

Ibuprofen is amongst the most worldwide consumed pharmaceuticals. The present work presents the first data in the occurrence of ibuprofen in Portuguese surface waters, focusing in the north area of the country, which is one of the most densely populated areas of Portugal. Analysis of ibuprofen is based on pre-concentration of the analyte with solid phase extraction and subsequent determination with liquid chromatography coupled to fluorescence detection. A total of 42 water samples, including surface waters, landfill leachates, Wastewater Treatment Plant (WWTP), and hospital effluents, were analyzed in order to evaluate the occurrence of ibuprofen in the north of Portugal. In general, the highest concentrations were found in the river mouths and in the estuarine zone. The maximum concentrations found were 48,720 ng?L^?1 in the landfill leachate, 3,868 ng?L^?1 in hospital effluent, 616 ng?L^?1 in WWTP effluent, and 723 ng?L^?1 in surface waters (Lima river). Environmental risk assessment was evaluated and at the measured concentrations only landfill leachates reveal potential ecotoxicological risk for aquatic organisms. Owing to a high consumption rate of ibuprofen among Portuguese population, as prescribed and non-prescribed medicine, the importance of hospitals, WWTPs, and landfills as sources of entrance of pharmaceuticals in the environment was pointed out. Landfill leachates showed the highest contribution for ibuprofen mass loading into surface waters. On the basis of our findings, more studies are needed as an attempt to assess more vulnerable areas.     

Survey of the occurrence of pharmaceuticals in Spanish finished drinking waters

Fifty samples of finished drinking waters (FDWs) from Spain covering 12 million inhabitants were tested for 53 pharmaceuticals pertaining to 12 different Anatomical Therapeutic Chemical (ATC) classification system codes. The studied compounds are a combination of most commonly consumed pharmaceuticals with other barely reported in the literature. Five compounds, azithromycin, clarithromycin, erythromycin, sulfamethoxazole, and ibuprofen were tentatively identified by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) in some samples (2 to 15 %), but only ibuprofen and azithromycin could be confirmed when analyzed by liquid chromatography–high-resolution mass spectrometry (LC-HRMS) with a quadrupole-Orbitrap instrument. Concentration levels of ibuprofen in the positive samples ranged from 12 to 17 ng/L (n?=?6) while for azithromycin values from 5 to 9.5 ng/L (n?=?3) were found. Ibuprofen fragmentation behaviour in different mass spectrometry instrument configurations (triple quadrupole, quadrupole-ion trap, and quadrupole-Orbitrap) was evaluated.     

Detection limits can influence the interpretation of pesticide monitoring data in Canadian surface waters

Water quality monitoring programs rely on residue data that are frequently left censored, due to some observations occurring below the Method Detection Limit (MDL). Our objective was to determine the influence the MDL has on the interpretation of pesticide residues in surface waters. Water samples from tributaries in southern and central Ontario were collected by Environment Canada from 2003 to 2008 and were analyzed for 27 pesticides, with MDLs that averaged 7.02 ng⁻¹ L (range 0.39-25.1 ng⁻¹ L). We then simulated MDLs ranging from 25 to 1700 ng⁻¹ L, to determine the impact this would have on the reporting of pesticide concentrations and detections. The mean number of pesticides detected simultaneously declined with increasing, i.e. less sensitive MDLs, from 5.02 pesticides (native MDL) to 0.08 pesticides detected (MDL < 1700 ng⁻¹ L). We compared the proportion of sites where pesticides were detected in surface waters under five MDL scenarios for 13 selected pesticides. The proportions decreased sharply with increasing MDLs. We calculated detection probabilities in an effort to compensate for higher MDLs using maximum likelihood; while adjusting for detection probabilities generally improved estimates of the presence of pesticides, as the MDLs increased the ability to compensate for detection probabilities deteriorated and became unviable at high MDLs. Depending on the method of substitution for observations below MDL (replacement with ½ × or 0 × MDL), the mean and median pesticide residues became increasingly over- and underestimated, respectively, at higher MDLs. Although monitoring programs that are focused on exceedences of water quality guidelines may not require low MDLs, the achievable goals of monitoring programs oriented towards other ecological and toxicological objectives may be limited by higher MDLs.     

Time-integrated sampling of glyphosate in natural waters

Environmental monitoring of pesticide residues in surface water is often done with time-integrated sampling where a specified volume is sampled each hour during, e.g., a week, thus avoiding at momentary high or low extreme concentrations. However, sampling over an extended period of time can result in losses of easily degradable analytes, why the stability of the target analytes over the timespan of the sampling must be checked. Glyphosate is one of the most widely used herbicides. Because of its chemical complexity, glyphosate binds differently to metals and colloids at different pH, and the degradation may also be affected. Recovery of glyphosate from spiked natural waters after 1 and 3 weeks of storage was higher when the samples were acidified to approximately pH 2 rather than at their natural pH. Keeping the samples refrigerated to 4 °C in darkness also enhanced recovery, while glyphosate losses were substantial from samples kept at their natural pH at 20 °C. Total loss of glyphosate was observed in some samples kept at natural pH, 20 °C, and daylight; a loss partly due to binding to metals or colloids that could only partially be reversed by acidification. For 1-week time-integrated sampling a small amount of hydrochloric acid in a piece of heat-sealed hydrophobic micro-porous tubing is added to the sampling bottles before deployment, a procedure that acidifies the samples during collection keeping them below pH 2 until analysis, thus minimising losses of glyphosate. The method also allows determination of the primary degradation product aminomethylphosphonic acid (AMPA).     

Determination of pharmaceuticals, personal care products, and pesticides in surface and treated waters: method development and survey

Water is fundamental to the existence of life since it is essential to a series of activities, such as agriculture, power generation, and public and industrial supplies. The residual water generated by these activities is released into the environment, reaches the water systems, and becomes a potential risk to nontarget organisms. This paper reports the development and validation of a quantitative method, based on solid-phase extraction and liquid chromatography tandem mass spectrometry, for the simultaneous analysis of 18 pharmaceuticals and personal care products (PPCPs) and 33 pesticides in surface and drinking waters. The accuracy of the method was determined by calculating the recoveries, which ranged from 70 to 120 % for most pesticides and PPCPs, whereas limits of quantification ranged from 0.8 to 40 ng/L. After the validation step, the method was applied to drinking and surface waters. Pesticides and PPCPs were found in concentrations lower than 135.5 ng/L. The evaluation of different water sources with regard to contamination by pesticides and PPCPs has been quite poor in southern Brazil.     

Simultaneous passive sampling of volatile organic compounds

In this paper, the results obtained in the simultaneous passive sampling of toluene, hexane, methyl ethyl ketone and ethyl acetate on activated charcoal are presented and compared with results obtained when the compounds were tested individually. Any observed deviations in the sampling rate are possibly due to the variations in the adsorption efficiency or in the coefficients of desorption caused by the presence of more than one adsorbate, though in all cases the values obtained are within the accepted margins recommended by NIOSH     

慧星试验对水体安全性分析研究

利用彗星试验检测苏南某湖泊湖心区、长江某取水口及其给水处理厂出水水样的遗传毒性,并对结果进行分析研究.结果表明,各水样均能引起DNA损伤,在丰水期致DNA损伤作用的大小顺序为给水厂出水水样＞湖泊水样＞长江取水口水样;在枯水期致DNA损伤作用的大小顺序为湖泊水样＞长江取水口水样＞给水厂出水水样.随着染毒剂量的加大,细胞损伤率增加,细胞受损的程度也在加重,并向3、4级损伤集中,呈明显的剂量-效应关系.     

Designing of sampling programmes for industrial effluent monitoring

Introduction  

Monitoring of effluent discharges from industrial establishments discharging directly into municipality sewers is one of the major water pollution control activities conducted by municipalities. For largely industrialised municipalities, the task can be quite expensive and not effective if sampling programmes are not properly designed. In most cases, samples are randomly collected without proper knowledge of the discharge patterns of various industries. As a result, the information obtained does not give a good reflection of the quality of effluent being discharged.     

A schematic sampling protocol for contaminant monitoring in raptors

Birds of prey, owls and falcons are widely used as sentinel species in raptor biomonitoring programmes. A major current challenge is to facilitate large-scale biomonitoring by coordinating contaminant monitoring activities and by building capacity across countries. This requires sharing, dissemination and adoption of best practices addressed by the Networking Programme Research and Monitoring for and with Raptors in Europe (EURAPMON) and now being advanced by the ongoing international COST Action European Raptor Biomonitoring Facility. The present perspective introduces a schematic sampling protocol for contaminant monitoring in raptors. We provide guidance on sample collection with a view to increasing sampling capacity across countries, ensuring appropriate quality of samples and facilitating harmonization of procedures to maximize the reliability, comparability and interoperability of data. The here presented protocol can be used by professionals and volunteers as a standard guide to ensure harmonised sampling methods for contaminant monitoring in raptors.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01341-9) contains supplementary material, which is available to authorized users.     

Polymer selection for passive sampling: a comparison of critical properties

Next to the bi-phasic semipermeable membrane devices (SPMDs), single-phase passive samplers are becoming more popular for the sampling of hydrophobic contaminants. We therefore evaluated some critical properties of 13 polymers: low-density polyethylene (LDPE), polyoxymethylene (POM), silicone rubbers (SRs), including polydimethylsiloxane, and ethylene/octene co-polymer (EXACT). Polymer comparison included four critical properties: release of oligomers, swelling in solvents (dichloromethane, hexane, ethyl acetate, acetone and methanol), contaminant diffusion coefficients and partition coefficients for naphthalene, fluoranthene, benzo[a]pyrene and dibenz[a,h]anthracene. Amounts of extracted oligomers ranged from 2% to 4% for SRs and LDPE, to about 1% for EXACT. No oligomer release was observed for POM. Diffusion coefficients were higher in all SRs compared with LDPE and EXACT. No measurable diffusion was observed in POM after 24h of exposure. Differences in polymer-water partition coefficients spanned two orders of magnitude, with the lowest values observed for POM and the highest values observed for LDPE and EXACT. For the ten tested SRs, this range was less than 0.4 log units. Transport resistances estimated on the basis of diffusion coefficients and partition coefficients were generally lower for SRs than for LDPE and EXACT.     

Characterization of SDS-degrading Delftia acidovorans and in situ monitoring of its temporal succession in SDS-contaminated surface waters

Incomplete removal of sodium dodecyl sulfate (SDS) in wastewater treatment plants may result in SDS residues escaping and finding their way into receiving water bodies like rivers, lakes, and sea. Introduction of effective microorganisms into the aerobic treatment facilities can reduce unpleasant by-products and SDS residues. Selecting effective microorganisms for SDS treatment is a big challenge. Current study reports the isolation, identification, and in situ monitoring of an effective SDS-degrading isolate from detergent-polluted river waters. Screening was carried out by the conventional enrichment culture technique and the isolate was tentatively identified by using fatty acid methyl ester and 16S ribosomal RNA (rRNA) sequence analyses. Fatty acids produced by the isolate investigated were assumed as typical for the genus Comamonas. 16S rRNA sequence analysis also confirmed that the isolate had 95 % homology with Delftia acidovorans known as Comamonas or Pseudomonas acidovorans previously. D. acidovorans exhibited optimum growth at SDS concentration of 1 g l^-1 but tolerated up to 10 g l^-1 SDS. 87 % of 1.0 g l^-1 pure SDS was degraded after 11 days of incubation. The temporal succession of D. acidovorans in detergent-polluted river water was also monitored in situ by using Comamonas-specific fluorescein-labeled Cte probe. Being able to degrade SDS and populate in SDS-polluted surface waters, D. acidovorans isolates seem to be very helpful in elimination of SDS.