Distribution of perfluorinated alkyl substances in marine shellfish along the Chinese Bohai Sea coast

Perfluorinated alkyl substances (PFASs) are emerging persistent organic pollutants, which pose a threat to human health primarily by dietary exposure, especially through seafood. Bohai Sea (a semi-closed sea located north of China) is an important shellfish aquaculture area that is possibly highly-polluted with PFASs. In this study, we first evaluated contamination by PFASs in a total of 230 samples of marine shellfish from the Bohai Sea. Samples included five important shellfish species, collected from important aquaculture spots distributed around the Bohai Sea. Samples were analyzed by an ultra-fast liquid chromatography-tandem mass spectrometry method, which could simultaneously detect 23 PFASs in shellfish. Our research verified that PFASs have become a threat to the safety of shellfish products in this area. Furthermore, contamination by PFASs in shellfish changed depending on the components of PFASs, the species of shellfish, and the sampling sites. Many of the 23 target compounds contributed to the high detection ratio (>50%) as follows: perfluorooctanoic acid (PFOA)?>?perfluorononanoic acid?>?perfluorodecanesulfonic acid?>?perfluorooctanesulfonic acid (PFOS). Compared with other dominant components, PFOA not only had the highest detection percentage in shellfish samples (98.3%), but its detection level contributed to 87.2% of total PFASs concentrations, indicating that PFOA is the major threat to the safety of shellfish products. The highest level of PFAS was found in clams (62.5?ng?g^?1 wet weight of PFOA). The concentration of total PFAS in different shellfish species showed the following trend: clams?>?mussels?>?scallops?>?whelks?>?oysters. The maximum concentration of total PFAS or PFOA was found in Shouguang. The total concentration of PFOS and its precursor were highest in Cangzhou, possibly due to local industrial activities. The results presented in this paper provide new data on the contamination of marine shellfish along the Bohai Sea coasts in China, and constitute a reference for future monitoring of contamination by emerging contaminants in Bohai coast.     

Removal of perfluorinated surfactants by sorption onto granular activated carbon, zeolite and sludge

Perfluorinated surfactants are emerging pollutants of increasing public health and environmental concern due to recent reports of their world-wide distribution, environmental persistence and bioaccumulation potential. Treatment methods for the removal of anionic perfluorochemical (PFC) surfactants from industrial effluents are needed to minimize the environmental release of these pollutants. Removal of PFC surfactants from aqueous solutions by sorption onto various types of granular activated carbon was investigated. Three anionic PFC surfactants, i.e., perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA) and perfluorobutane sulfonate (PFBS), were evaluated for the ability to adsorb onto activated carbon. Additionally, the sorptive capacity of zeolites and sludge for PFOS was compared to that of granular activated carbon. Adsorption isotherms were determined at constant ionic strength in a pH 7.2 phosphate buffer at 30 degrees C. Sorption of PFOS onto activated carbon was stronger than PFOA and PFBS, suggesting that the length of the fluorocarbon chain and the nature of the functional group influenced sorption of the anionic surfactants. Among all adsorbents evaluated in this study, activated carbon (Freundlich K(F) values=36.7-60.9) showed the highest affinity for PFOS at low aqueous equilibrium concentrations, followed by the hydrophobic, high-silica zeolite NaY (Si/Al 80, K(F)=31.8), and anaerobic sludge (K(F)=0.95-1.85). Activated carbon also displayed a superior sorptive capacity at high soluble concentrations of the surfactant (up to 80 mg l(-1)). These findings indicate that activated carbon adsorption is a promising treatment technique for the removal of PFOS from dilute aqueous streams.     

Extraction procedure optimization for perfluorooctane sulfonate and perfluorooctanoic acid in food packaging determination by LC-MS/MS

This research aimed to optimize the extraction method parameters for sample pretreatment and determine the levels of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) contamination in food packaging made of paper. Techniques used were pressurized liquid extraction (PLE) followed by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). Influence parameters of PLE were carefully evaluated for extracted concentration of samples in low level (ng g^?1). The study found that the optimal conditions for PLE were 30 min static extraction time with a flush volume of 100% cell volume and one extraction cycle at 80°C and 1,000 psi. The extraction technique validated the absolute recovery from PFOS and PFOA fortified control samples at three different levels (5, 50, and 200 ng g^?1), with seven repeats at each fortification level. The average recoveries were 79% or higher, with relative standard deviation (RSD) less than 11%. Optimization of the PLE method was established based on recovery data, accuracy, precision, and repeatability of the method. Using optimal PLE technique, PFOS and PFOA were extracted from 34 food-packaging samples collected in Thailand. PFOS and PFOA were detected in all kinds of collected samples, with average concentrations of 4.89 and 2.87 ng g^?1, respectively. The concentrations of PFOS and PFOA were highest in fast-food container samples: 36.99 and 9.99 ng g^?1, respectively.     

Partitioning of perfluorooctanoate (PFOA), perfluorooctane sulfonate (PFOS) and perfluorooctane sulfonamide (PFOSA) between water and sediment

Laboratory partitioning experiments were conducted to elucidate the sorption behaviour and partitioning of perfluoroalkyl compounds (PFCs). Three different sediment types were used and separately spiked with perfluorooctanoate (PFOA), perfluorooctane sulfonate (PFOS) and perfluorooctane sulfonamide (PFOSA) at low environmentally realistic concentrations. PFOA, PFOS and PFOSA were mainly distributed in the dissolved phase at low suspended solid concentrations, indicating their long-range transport potential in the marine environment. In all cases, the equilibrium isotherms were linear and the organic carbon normalised partition coefficients (K_OC) decreased in the following order: PFOSA (log K_OC = 4.1 ± 0.35 cm³ g⁻¹) > PFOS (3.7 ± 0.56 cm³ g⁻¹) > PFOA (2.4 ± 0.12 cm³ g⁻¹). The level of organic content had a significant influence on the partitioning. For the sediment with negligible organic content the density of the sediment became the most important factor influencing the partitioning. Ultimately, data on the partitioning of PFCs between aqueous media and suspended solids are essential for modelling their transport and environmental fate.     

Radiosynthesis of perfluorooctanesulfonate (PFOS) and perfluorobutanesulfonate (PFBS), including solubility, partition and adhesion studies

Here, we describe for the first time the synthesis of [³⁵S] PFOS and [³⁵S] PFBS with sulfur-35 enriched sulfur dioxide as the radiolabelled reagent, resulting in 2.5 and 2.3 mCi of product, respectively. Basic information concerning the physicochemical properties of perfluorooctanesulfonate (PFOS), perfluorobutanesulfonate (PFBS) and perfluorooctanoic acid (PFOA) are still limited. Hence, we utilized these radiolabelled perfluoroalkanesulfonates (PFSAs), as well as carbon-14 labelled perfluorooctanoic acid ([¹⁴C] PFOA) to determine some basic characteristics of physiological and experimental significance.The solubility of PFOS in buffered aqueous solutions at pH 7.4 was found to be severely reduced in the presence of potassium and sodium ions, which, however, did not reduce the solubility of PFOA or PFBS. PFOS was found to adhere to a small extent to polypropylene and polystyrene, whereas no such adhesion of PFOA or PFBS was detected. The extents of adhesion of PFOS and PFOA to glass were found to be 20% and 10%, respectively. For the first time, the partition coefficients for PFOS, PFBS and PFOA between n-octanol and water were determined experimentally, to be −0.7, −0.3, and 1.4, respectively, reflecting the difference in the amphiphilic natures of these molecules.     

Sorption of perfluorooctane sulfonate to carbon nanotubes in aquatic sediments

To date, sorption of organic compounds to nanomaterials has mainly been studied for the nanomaterial in its pristine state. However, sorption may be different when nanomaterials are buried in sediments. Here, we studied sorption of Perfluorooctane sulfonate (PFOS) to sediment and to sediment with 4% multiwalled carbon nanotubes (MWCNTs), as a function of factors affecting PFOS sorption; aqueous concentration, pH and Ca²⁺ concentration. Sorption to MWCNT in the sediment–MWCNT mixtures was assessed by subtracting the contribution of PFOS sorption to sediment-only from PFOS sorption to the total sediment–MWCNT mixture. PFOS Log K_D values ranged 0.52–1.62 L kg^?1 for sediment and 1.91–2.90 L kg^?1 for MWCNT present in the sediment. The latter values are relatively low, which is attributed to fouling of MWCNT by sediment organic matter. PFOS sorption was near-linear for sediment (Freundlich exponent of 0.92 ± 0.063) but non-linear for MWCNT (Freundlich exponent of 0.66 ± 0.03). Consequently, the impact of MWCNT on sorption in the mixture was larger at low PFOS aqueous concentration. Effects of pH and Ca²⁺ on PFOS sorption to MWCNT were statistically significant. We conclude that MWCNT fouling and PFOS concentration dependency are important factors affecting PFOS–MWCNT interactions in sediments.     

Removal mechanisms and kinetics of trace tetracycline by two types of activated sludge treating freshwater sewage and saline sewage

Understanding the removal mechanisms and kinetics of trace tetracycline by activated sludge is critical to both evaluation of tetracycline elimination in sewage treatment plants and risk assessment/management of tetracycline released to soil environment due to the application of biosolids as fertilizer. Adsorption is found to be the primary removal mechanism while biodegradation, volatilization, and hydrolysis can be ignored in this study. Adsorption kinetics was well described by pseudo-second-order model. Faster adsorption rate (k ₂?=?2.04?×?10^?2?g?min^?1?μg^?1) and greater adsorption capacity (q _e?=?38.8 μg?g^?1) were found in activated sludge treating freshwater sewage. Different adsorption rate and adsorption capacity resulted from chemical properties of sewage matrix rather than activated sludge surface characteristics. The decrease of tetracycline adsorption in saline sewage was mainly due to Mg²⁺ which significantly reduced adsorption distribution coefficient (K _d) from 12,990?±?260 to 4,690?±?180 L?kg^?1. Species-specific adsorption distribution coefficients followed the order of $ K_{\mathrm{d}}^{{ + 00}} \gg K_{\mathrm{d}}^{{ + - 0}} > K_{\mathrm{d}}^{{ + - - }} $ . Contribution of zwitterionic tetracycline to the overall adsorption was >90 % in the actual pH range in aeration tank. Adsorption of tetracycline in a wide range of temperature (10 to 35 °C) followed the Freundlich adsorption isotherm well.     

Perfluorooctanoic acid and perfluorooctane sulfonate released from a waste water treatment plant in Bavaria, Germany

Purpose

Perfluorooctanoate (PFOA), perfluorooctane sulfonate (PFOS), and precursors and derivatives thereof have been employed as surfactants and anti-adhesives. PFOA and PFOS are environmentally persistent and the discharge of municipal waste waters is one of the principal routes of these compounds into the aquatic environment. In a previous study, the concentrations of PFOA and PFOS in grab samples collected from the waste water treatment plant (WWTP) of Bayreuth, a city of 72,000 inhabitants in Bavaria, Germany, during two periods showed considerable variability. For a better estimate of average mass flows, the surfactants were monitored (five samplings) from 16 March to 18 May 2007. In a second campaign, river water receiving the WWTP effluent was sampled twice a day for five consecutive days.

Methods

Quantitative analysis was done by stable-isotope dilution, pre-cleaning, and pre-concentration by solid-phase extraction, and liquid chromatography followed by electrospray ionization/tandem mass spectrometry.

Results

The mass flows of PFOA and PFOS through the WWTP were determined. PFOA is fully discharged into the river, while about half of PFOS is retained in the sewage sludge. The average daily mass load of the river Roter Main by the WWTP of Bayreuth is about 1.2?±?0.5 g PFOA and 5?±?2 g PFOS, with variations of up to 140% within one day.

Conclusion

Overall, the total annual release to the rivers of Germany may be in the range of several hundred kilograms of PFOA and several tons of PFOS.     

Fate and transport of perfluoro- and polyfluoroalkyl substances including perfluorooctane sulfonamides in a managed urban water body

Transport and fate of perfluoro- and polyfluoroalkyl substances (PFASs) in an urban water body that receives mainly urban runoff was investigated. Water, suspended solids, and sediment samples were collected during the monsoon (wet) and inter-monsoon (dry) season at different sites and depths. Samples were analyzed for C7 to C12 perfluoroalkyl carboxylate homologues (PFCAs) (PFHpA, PFOA, PFNA, PFDA, PFUnA, PFDoA), perfluorohexane, perfluorooctane, and 6:2-fluorotelomer sulfonate (PFHxS, PFOS, and 6:2FtS, respectively), perfluorooctane sulfonamide (FOSA), N-ethyl FOSA (sulfluramid), N-ethyl sulfonamidoethanol (N-EtFOSE), and N-methyl and N-ethyl sulfonamidoacetic acid (N-EtFOSAA and N-MeFOSAA, respectively). Concentrations in wet samples were only slightly higher. The sum total PFAS (ΣPFAS) concentrations dissolved in the aqueous phase and sorbed to suspended solids (SS) ranged from 107 to 253 ng/L and 11 to 158 ng/L, respectively. PFOA, PFOS, PFNA, PFHxS, and PFDA contributed most (approximately 90 %) to the dissolved ΣPFASs. N-EtFOSA dominated the particulate PFAS burden in wet samples. K _D values of PFOA and PFOS calculated from paired SS and water concentrations varied widely (1.4 to 13.7 and 1.9 to 98.9 for PFOA and PFOS, respectively). Field derived K _D was significantly higher than laboratory K _D suggesting hydrophobic PFASs sorbed to SS resist desorption. The ΣPFAS concentrations in the top sedimentary layer ranged from 8 to 42 μg/kg and indicated preferential accumulation of the strongly sorbing long-chain PFASs. The occurrence of the metabolites N-MeFOSAA, N-EtFOSAA and FOSA in the water column and sediments may have resulted from biological or photochemical transformations of perfluorooctane sulfonamide precursors while the absence of FOSA, N-EtFOSA and 6:2FtS in sediments was consistent with biotransformation.     

A comparative study on sorption of perfluorooctane sulfonate (PFOS) by chars, ash and carbon nanotubes

Perfluorooctane sulfonate (PFOS), as one of emerging contaminants, has been attracting increasing concerns in recent years. Sorption of PFOS by maize straw- and willow-derived chars (M400 and W400), maize straw-origin ash (MA) as well as three carbon nanotubes (CNTs) was studied in this work. The sorption kinetics of PFOS by the six adsorbents was well fitted by the pseudo-second-order model. CNTs reached equilibrium in 2 h, much faster than those by chars (384 h) and ash (48 h). According to the sorption isotherms, both single-walled carbon nanotubes (SWCNT) and MA had high sorption capacities (over 700 mg g⁻¹), while the two chars had low sorption capacities (below 170 mg g⁻¹) caused by their small BET surface area. In the case of MA, due to its positively charged surface, both hydrophobic interaction and electrostatic attraction involved in the sorption, and the formation of hemi-micelles further favored the sorption. This study suggested that SWCNT and MA were effective adsorbents for PFOS removal from water. Compared to SWCNT, MA is low cost and easy to obtain, so it could be a preferred adsorbent for PFOS removal.     

Comparative assessment of metribuzin sorption efficiency of biochar,hydrochar and vermicompost

Abstract

In this study, we used two biochars (BC) produced from grapevine pruning residues (BCgv) and red spruce wood (BCrs), two hydrochars (HC) from urban pruning residues (HCup) and the organic fraction of municipal solid wastes (HCuw), and two vermicomposts (VC) obtained vermicomposting digestates from buffalo manure (VCbm) and mixed feedstock (VCmf). Adsorption kinetics and isotherms of metribuzin onto these materials were performed. Sorption kinetics followed preferentially a pseudo-second-order model, thus indicating the occurrence of chemical interactions between the sorbate and the adsorbents. Adsorption constants were calculated using the Freundlich and Langmuir models. Metribuzin sorption data on BCgv and both HC fitted preferentially the Freundlich equation, whereas on the other materials data fitted both isotherms well (r?>?0.95). Metribuzin sorption capacity of the materials followed the trend BC?>?HC?>?VC. Sorption constants of metribuzin normalised per organic carbon content (K_OC) on BCgv, BCrs, HCup, HCuw, VCbm and VCmf were 561, 383, 251, 214, 102 and 84?L kg^?1, respectively. A significant positive correlation (P?=?0.016) was calculated between distribution coefficients (K_d) of all materials and the corresponding organic carbon contents, thus indicating a prominent role of the organic fraction of these materials in the adsorption of metribuzin.     

The impact of semiconductor, electronics and optoelectronic industries on downstream perfluorinated chemical contamination in Taiwanese rivers

This study provides the first evidence on the influence of the semiconductor and electronics industries on perfluorinated chemicals (PFCs) contamination in receiving rivers. We have quantified ten PFCs, including perfluoroalkyl sulfonates (PFASs: PFBS, PFHxS, PFOS) and perfluoroalkyl carboxylates (PFCAs: PFHxA, PFHpA, PFOA, PFNA, PFDA, PFUnA, PFDoA) in semiconductor, electronic, and optoelectronic industrial wastewaters and their receiving water bodies (Taiwan's Keya, Touchien, and Xiaoli rivers). PFOS was found to be the major constituent in semiconductor wastewaters (up to 0.13 mg/L). However, different PFC distributions were found in electronics plant wastewaters; PFOA was the most significant PFC, contributing on average 72% to the effluent water samples, followed by PFOS (16%) and PFDA (9%). The distribution of PFCs in the receiving rivers was greatly impacted by industrial sources. PFOS, PFOA and PFDA were predominant and prevalent in all the river samples, with PFOS detected at the highest concentrations (up to 5.4 μg/L).     

Distribution of organophosphate insecticides in a Thai biomass-water system

Sorption and leaching of the organophosphate (OP) pesticides chlorpyrifos, profenofos, methyl parathion and malathion were investigated with four different types of biomass: coconut husk, rice husk, peat moss and peanut shell. Organic carbon contents of the biomass were in the range of 35.4–45.4%. Sorption studies were carried out by the batch (equilibrium) method at 4 different OP spike concentrations and at pH 3–7. Sorption isotherms conformed to a linear Freundlich equation and the Freundlich constant or sorption coefficient (K_D) confirmed that biomass organic carbon content was the principal sorbent factor affecting OP sorption. For a given sorbent, correlation of the extent of sorption with sorbate chemical properties was examined. Column leaching experiments involving different masses of coconut husk and peanut shell pre-spiked with OPs at the level equivalent to actual spraying concentrations in some Thai tangerine orchards were conducted. These experiments included repeated spikings and leaching. A water flow rate of 20 mL min^?1 was employed corresponding to the current average watering regime. Retardation and biodegradation with these sorbents were also examined.     

Sorption and desorption studies of a reactive azo dye on effective disposal of redundant material

The effective disposal of redundant elephant dung (ED) is important for environmental protection and utilization of resource. The aim of this study was to remove a toxic-azo dye, Reactive Red (RR) 120, using this relatively cheap material as a new adsorbent. The FTIR–ATR spectra of ED powders before and after the sorption of RR 120 and zero point charge (pH_zpc) of ED were determined. The sorption capacity of ED for removing of RR 120 were carried out as functions of particle size, adsorbent dose, pH, temperature, ionic strength, initial dye concentration, and contact time. Sorption isotherm, kinetic, activation energy, thermodynamic, and desorption parameters of RR 120 on ED were studied. The sorption process was found to be dependent on particle size, adsorbent dose, pH, temperature, ionic strength, initial dye concentration, and contact time. FTIR–ATR spectroscopy indicated that amine and amide groups have significant role on the sorption of RR 120 on ED. The pH_zpc of ED was found to be 7.3. Sorption kinetic of RR 120 on ED was well described by sigmoidal Logistic model. The Langmuir isotherm was well fitted to the equilibrium data. The maximum sorption capacity was 95.71 mg?g^?1. The sorption of RR 120 on ED was mainly physical and exothermic according to results of D–R isotherm, Arrhenius equation, thermodynamic, and desorption studies. The thermodynamic parameters showed that this process was feasible and spontaneous. This study showed that ED as a low-cost adsorbent had a great potential for the removal of RR 120 as an alternative eco-friendly process.     

Phthalates and perfluorinated alkylated substances in Atlantic bluefin tuna (Thunnus thynnus) specimens from Mediterranean Sea (Sardinia,Italy): Levels and risks for human consumption

Atlantic blue fin tuna (Thunnus thynnus) is a species of great importance for Mediterranean Sea area, from both ecological and commercial points of view. The scientific literature reports few data on the contamination of this fish by emerging organic compounds such as perfluorinated alkylated substances(PFASs) and phthalates, being the latter never been studied in tuna. This study therefore investigated the presence of the PFASs perfluorooctane sulphonate (PFOS) and perfluoroctanoic acid (PFOA) and the phthalate di-2-ethylhexyl phthalate (DEHP), also monitored by its metabolite mono-2-ethylhexyl phthalate(MEHP), to assess both the state of contamination of Atlantic bluefin tuna specimen and the risk due to the toxicity of these compounds for human consumption. While PFOA was never found, detectable levels of PFOS (0.4–1.88 ng/g), DEHP (9–14.62 ng/g) and MEHP (1.5–6.30 ng/g) were found. The results were elaborated relating the accumulation to the size and age of the individuals and showed a correlation between the levels of different pollutants investigated.     

Is pesticide sorption by constructed wetland sediments governed by water level and water dynamics?

Constructed wetlands (CWs) are used to reduce the pesticide inputs from tile drainage or run-off to surface water. Their effectiveness appears variable and remains to be better characterized and understood. The aim of this study was to assess the influences of two hydraulic parameters (i.e., dynamics and water level) on the sorption process occurring in CWs. Then, two solid/liquid ratios were studied (1/1 and 1/5) to mimic the water level variation in the field, and two agitation speeds were used (none and gentle agitation) to simulate different water dynamics (stagnation and flow pass, respectively). Sorption kinetics and isotherms were obtained for four pesticides with contrasting properties. The pesticide adsorption coefficients were classified as follows: boscalid (BSC) > cyproconazole (CYP) > isoproturon (IPU) ～ dimethachlor (DMT) at any ratio or agitation, in agreement with their water solubilities and K _ow values. The effect of the solid/liquid ratio was evidenced for all conditions. Indeed, the adsorption equilibrium time was reached more quickly for the 1/1 ratio (24–72 h) than for the 1/5 ratio (96–120 h). In addition, the adsorption coefficients (K _f ^ads) were larger for the 1/1 ratio (1.8–11.2 L kg^?1) than for the 1/5 ratio (1.0–5.9 L kg^?1). The agitation effect was ?more evidenced for the 1/5 ratio and for the more hydrophobic molecules, such as BSC and CYP, for which adsorption equilibrium time was never reached with agitation (>120 h), while it was reached at 96 h without agitation. Moreover, the K _f ^ads values were larger with agitation than without agitation for BSC and CYP, whereas they were similar for the two agitations for IPU and DMT. Our results demonstrated that the hydrodynamic function of CWs could influence pesticide sorption with variable effects according to the molecular properties and consequently influence the mitigation effect of CWs throughout the year.     

Perfluoroalkyl acids in blood serum samples from children in Taiwan

Severe perfluoroalkyl acid (PFAA) contamination resulting from the fast-growing semiconductor, electrochemical, and optoelectronic industries has been determined in the river water in the vicinity of the Taipei area, Taiwan, during recent years. However, little is known about body burdens of the PFAA contaminations in local residents, especially children living in the Taipei area recently. In this study, ten target PFAA analytes consisted of three perfluorosulfonates (PFSAs) and seven perfluorocarboxylates (PFCAs) in the blood serum samples, collected from 225 healthy children with an average age of 13.6 years in the Taipei area from 2009 to 2010, were analyzed via high-performance liquid chromatography–tandem mass spectrometry (HPLC–MS/MS). As the dominant PFAA contaminant in the blood serum samples from Taiwanese children, perfluorooctane sulfonate (PFOS) contributed 86 % of all the target PFAA analytes, while the other nine analytes contributed less than 5 % individually. PFOS showed the highest median up to 29 ng/mL, ranging from 0.03 to 148 ng/mL, which was higher than that observed in the serum samples collected from Taiwanese children between 2006 and 2008. Statistically, serum concentrations of perfluorobutane sulfonate (PFBS), perfluorohexane sulfonate (PFHxS), and perfluorooctanoic acid (PFOA) had significantly positive correlations with ages of children (p?<?0.05). Furthermore, serum PFBS, PFHxS, and PFOA concentrations in the male children were considerably higher than those in the female children (p?=?0.049, p?=?0.000, p?=?0.000).     

Removal of Cu, Zn, and Cd from aqueous solutions by the dairy manure-derived biochar

Purpose

Biochar derived from waste biomass is now gaining much attention for its function as a biosorbent for environmental remediation. The objective of this study was to determine the effectiveness of biochar as a sorbent in removing Cd, Cu, and Zn from aqueous solutions.

Methods

Biochar was produced from dairy manure (DM) at two temperatures: 200°C and 350°C, referred to as DM200 and DM350, respectively. The obtained biochars were then equilibrated with 0–5 mM Cu, Zn or Cd in 0.01 M NaNO₃ solution for 10 h. The changes in solution metal concentrations after sorption were evaluated for sorption capacity using isotherm modeling and chemical speciation Visual MINTEQ modeling, while the solid was collected for species characterization using infrared spectroscopy and X-ray elemental dot mapping techniques.

Results

The isotherms of Cu, Zn, and Cd sorption by DM200 were better fitted to Langmuir model, whereas Freundlich model well described the sorption of the three metals by DM350. The DM350 were more effective in sorbing all three metals than DM200 with both biochars had the highest affinity for Cu, followed by Zn and Cd. The maximum sorption capacities of Cu, Zn, and Cd by DM200 were 48.4, 31.6, and 31.9 mg g^?1, respectively, and those of Cu, Zn, and Cd by DM350 were 54.4, 32.8, and 51.4 mg g^?1, respectively. Sorption of the metals by the biochar was mainly attributed to their precipitation with PO ₄ ^3? or CO ₃ ^2? originating in biochar, with less to the surface complexation through –OH groups or delocalized π electrons. At the initial metal concentration of 5 mM, 80–100 % of Cu, Zn, and Cd retention by DM200 resulted from the precipitation, with less than 20 % from surface adsorption through phenonic –OH complexation. Among the precipitation, 20–30 % of the precipitation occurred as metal phosphate and 70–80 % as metal carbonate. For DM350, 75–100 % of Cu, Zn, and Cd retention were due to the precipitation, with less than 25 % to surface adsorption through complexation of heavy metal by phenonic –OH site or delocalized π electrons. Among the precipitation, only less than 10 % of the precipitation was present as metal phosphate and more than 90 % as metal carbonate.

Conclusions

Results indicated that dairy manure waste can be converted into value-added biochar as a sorbent for sorption of heavy metals, and the mineral components originated in the biochar play an important role in the biochar's high sorption capacity.     

Adsorption of chlorpyrifos,penconazole and metalaxyl from aqueous solution by modified clays

Sorption of three pesticides (chlorpyrifos, metalaxyl and penconazole) has been measured on a commercial clay montmorillonite and on the same mineral modified with either of two cationic-surfactant micelles. Both micelle–clay complexes, commercial names Cloisite 20A and Cloisite 30B, showed a good capacity to sorb all three pesticides from water, whereas their sorption on the natural montmorillonite was not described by an isotherm. Modelling sorption on both micelle–clay complexes showed that the Freundlich sorption constant (K _F) was higher for chlorpyrifos on Cloisite 20A (K _F = 7.76) than on Cloisite 30B (K _F = 5.91), whereas the sorption of metalaxyl was stronger on Cloisite 30B (K _F = 1.07) than on Cloisite 20A (K _F = 0.57). Moreover the micelle–clay complex Cloisite 20A also showed a good affinity for penconazole, the maximum quantity adsorbed (q _m) of 6.33 mg g^?1 being 45% more than that on Cloisite 30B. Single-batch adsorption of each pesticide onto both micelle–clay complexes was studied using the Freundlich isotherm for chlorpyrifos and metalaxyl and the Langmuir isotherm for penconazole. The Cloisite 20A micelle–clay complex was predicted to require 23% less adsorbent to treat certain volumes of wastewater containing 30 mg L^?1 chlorpyrifos, 43% more to treat metalaxyl similarly and 57% less to treat penconazole compared with Cloisite 30B.     

Responses of kinetics and capacity of phenanthrene sorption on sediments to soil organic matter releasing

Soil organic matter (SOM) releasing with dissolved organic matter (DOM) formed in solution was confirmed in a sediment/water system, and the effects of SOM releasing on the sorption of phenanthrene on sediments were investigated. Inorganic salt (0–0.1 mol L^?1 NaCl) was used to adjust SOM releasing, and two sediments were prepared, the raw sediment (S1) from Weihe River, Shann’xi, China, and the eluted sediments with and without DOM supernatant remained, termed as S2a and S2b, respectively. The FTIR and ¹H NMR analysis indicate that the low molecular weight hydrophilic SOM fraction released prior to the high molecular weight hydrophobic fraction. As a response, phenanthrene sorption kinetics on S1 showed atypical and expressed as three stages: rapid sorption, pseudo sorption with partial desorption, and slow sorption, thus a defined “sorption valley” occurred in kinetic curve. In all cases, partition dominates the sorption, and sorption capacity (K_d) ranked as S2b > S1 > S2a. Compared with the alterations of sediment characters, DOM solubilization produced by SOM releasing exhibited a greater inhibitory effect on sorption with a relative contribution of 0.67. Distribution coefficients (K_doc) of PHE into DOM clusters were 2.10?×?10⁴–4.18?×?10⁴ L kg^?1, however a threshold concentration of 6.83 mg L^?1 existed in DOM solubilization. The study results will help to clarify PAHs transport and their biological fate in a sediment/water system.