Estimating temperature dependence of solubility and octanol-water partition coefficient for organic compounds using RP-HPLC.

Temperature dependence data for physical-chemical properties is increasingly required for modelling the fate of chemicals in the environment. Solubility and octanol-water partition coefficient (Kow) are among the most important parameters. A simple and fast method is presented to determine solubility and Kow of organic chemicals at different temperatures (5 degrees C, 15 degrees C, 25 degrees C, 35 degrees C) utilising a variable temperature RP-HPLC column. Correlations between capacity factors (k') and solubility and Kow were determined for some halogenated and methylated benzenes and showed that this approach could be used to predict acceptable results. New values for solubility and Kow as function of temperature for several compounds are presented.     

农药正辛醇／水分配系数的测定方法及其与其他环境参数的相关性

对已报道的农药正辛醇／水分配系数的６种测定方法进行了简述和比较，对农药Ｋｏｗ值与其他环境参数Ｓｗ，Ｋｏｃ，ＢＣＦ１的相关性进行了综述。     

Estimation of the aqueous solubility of complex organic compounds

The aqueous solubility of organic compounds depends on two contributing parameters: the ideal solubility and the activity coefficient. The methods available for the prediction of aqueous solubility have the ideal solubility term in common. They differ in the way they account for the activity coefficient. Various empirical and theoretical methods for predicting activity coefficients are compared in this report. The methods were first used with a Training Set of solutes. The same methods were then applied to a Test Set of solutes, which consisted of a series of compounds of pharmaceutical and environmental relevance. The Test Set encompassed a wide variety of chemical structures and high degree of structural complexity. Only those methods with a sound theoretical rationale are useful for both the Training and Test sets. A comparative evaluation of the methods tested was made through the quantification of the accuracy of their predictions and their range of applicability.     

Predicting aoueous solubility of organic nonelectrolytes from molar volume

Correlation equations relating aqueous solubility to molar volume and aqueous solubility to total molecular surface area were derived by regression analysis for several chemical classes which included both liquids and solids. These were similar to equations relating solubility with total molecular surface area and had similar correlation coefficients. The physical significance of the regression parameters obtained is discussed.     

Aqueous solubility, effects of salts on aqueous solubility, and partitioning behavior of hexafluorobenzene: experimental results and COSMO-RS predictions

The aqueous solubility of hexafluorobenzene has been determined, at 298.15 K, using a shake-flask method with a spectrophotometric quantification technique. Furthermore, the solubility of hexafluorobenzene in saline aqueous solutions, at distinct salt concentrations, has been measured. Both salting-in and salting-out effects were observed and found to be dependent on the nature of the cationic/anionic composition of the salt. COSMO-RS, the Conductor-like Screening Model for Real Solvents, has been used to predict the corresponding aqueous solubilities at conditions similar to those used experimentally. The prediction results showed that the COSMO-RS approach is suitable for the prediction of salting-in/-out effects. The salting-in/-out phenomena have been rationalized with the support of COSMO-RS σ-profiles. The prediction potential of COSMO-RS regarding aqueous solubilities and octanol-water partition coefficients has been compared with typically used QSPR-based methods. Up to now, the absence of accurate solubility data for hexafluorobenzene hampered the calculation of the respective partition coefficients. Combining available accurate vapor pressure data with the experimentally determined water solubility, a novel air-water partition coefficient has been derived.     

Study of fuel oxygenates solubility in aqueous media as a function of temperature and tert-butyl alcohol concentration

Methyl tert-butyl ether (MTBE) is the most widely used oxygenate in gasoline blending and has become one of the world’s most widespread groundwater and surface water pollutants. Alternative oxygenates to MTBE, namely ethyl tert-butyl ether (ETBE), tert-amyl ether (TAME) and diisopropyl ether (DIPE) have been hardly studied yet. The solubility of these chemicals is a key thermodynamic information for the assessment of the fate and transport of these pollutants. This work reports experimental data of water solubility at the range from 278.15 to 313.15 K and atmospheric pressure of ethers used in fuels (MTBE, ETBE, TAME and DIPE) due to the strong influence of temperature on its trend. From the experimental data, temperature dependent polynomials were fitted, thermodynamic parameters were calculated and theoretical models were used for prediction. Finally, the tert-butyl alcohol (TBA) influence in the solubility of MTBE and ETBE in aqueous media was studied.     

Modification of UNIFAC parameter table Revision 5 for representation of aqueous solubility and 1-octanol/water partition coefficient for POPs

In order to represent aqueous solubility and 1-octanol/water partition coefficient for POPs (persistent organic pollutants) by the UNIFAC model, two pairs of group interaction parameters in Revision 5 of the UNIFAC parameter table were modified. First, the pair of interaction parameters between the aromatic carbon-chloride (ACCl) and water (H2O) groups were corrected by minimizing the deviation between the experimental and calculated values of these properties for chlorinated benzenes, polychlorinated biphenyls, and polychlorinated dibenzo-p-dioxins and dibenzofurans. The corrected interaction parameters provided a better representation of both properties than the calculation results obtained in early works using the UNIFAC model. Second, the unknown pair of interaction parameters between the chloroalkene (Cl(C=C)) and H2O groups, which are required for calculating those properties of the other five POPs (aldrin, chlordane, endrin, dieldrin, and heptachlor), were newly determined from the experimental data on their properties. Finally, this study shows that Revision 5 could also predict solubility of POPs in some organic solvents. The modified parameter table is first suggested as the UNIFAC parameter table applicable to various phase equilibria including aqueous or nonaqueous solubility and partition coefficient of POPs.     

Relation of enhanced Pb solubility to Fe partitioning in soils

It is well documented that Pb solubility may be related to Fe chemistry in soils and enhanced Pb solubility may occur under certain reducing conditions; however, quantification of such relationships is unavailable. Based on metal classification, Pb (II) and Fe (II) are similar in some chemical characteristics. Thus, competition between Pb and Fe for ligands in soils may be important in determining Pb solubility. In this paper, Pb solubility was examined in a sandy soil after spiking with Pb and incubating for 40 days under water-flooded or non-water-flooded conditions. Solution chemistry in soil columns was adjusted using different concentrations of NaCl, CaCl(2) and deionized water of varying pH before incubation. The results showed that Pb solubility in the soil was not correlated well with pH, dissolved organic C or aqueous Fe concentrations. However, an index of Fe partition behavior using the ratio of aqueous Fe to sorbed Fe was related to Pb solubility. Enhanced Pb solubility occurred only when the index was < approximately 2 kg l(-1). The index can be a simple measure of Fe's ability to compete with Pb for ligands in solution. The ability of Fe to compete with Pb decreases as the index decreases and as the ratio approached its minimum, substantial increases in Pb solubility will be expected. In general, the index was not sensitive to changes in solution chemistry. A similar trend was observed using one data set published in the literature.     

Aqueous solubility, Henry's law constants and air/water partition coefficients of n-octane and two halogenated octanes

New data on the aqueous solubility of n-octane, 1-chlorooctane and 1-bromooctane are reported between 1 degree C and 45 degrees C. Henry's law constants, K(H), and air/water partition coefficients, K(AW), were calculated by associating the measured solubility values to vapor pressures taken from literature. The mole fraction aqueous solubility varies between (1.13-1.60)x10(-7) for n-octane with a minimum at approximately 23 degrees C, (3.99-5.07)x10(-7) for 1-chlorooctane increasing monotonically with temperature and (1.60-3.44)x10(-7) for 1-bromooctane with a minimum near 18 degrees C. The calculated air-water partition coefficients increase with temperature and are two orders of magnitude lower for the halogenated derivatives compared to octane. The precision of the results, taken as the average absolute deviations of the aqueous solubility, the Henry's law constants, or the air/water partition coefficients, from appropriate smoothing equations as a function of temperature is of 3% for n-octane and of 2% and 4% for 1-chlorooctane and 1-bromooctane, respectively. A new apparatus based on the dynamic saturation column method was used for the solubility measurements. Test measurements with n-octane indicated the capability of measuring solubilities between 10(-6) and 10(-10) in mole fraction, with an estimated accuracy better than +/-10%. A thorough thermodynamic analysis of converting measured data to air/water partition coefficients is presented.     

The aqueous solubility of twenty-seven insecticides and related compounds

The aqueous solubilities of 27 insecticides and related compounds were determined. Diazinon, fensulfothion and paraoxon had solubilities greater than reported in the literature. The presence of impurities and/or additional components in the mixture altered the measured solubility values. Addition of acetone in amounts up to 1% (volume) produced increases in parathion solubility up to 11%. The pH values of the equilibrated solubility systems were, in most instances, acidic and, in several instances, were in the pH 3-4 range.     

Evaluation of the dependence of aqueous solubility of nitro compounds on temperature and salinity: a COSMO-RS simulation

The solubility in pure and saline water at various temperatures was calculated for selected nitro compounds (nitrobenzene, 1,3,5-trinitrobenzene, 2-nitrotoluene, 3-nitrotoluene, 4-nitrotoluene, 2,4-dinitrotoluene, 2,6-dinitrotoluene, 2,3-dinitrotoluene, 3,4-dinitrotoluene, 2,4,6-trinitrotoluene) using the Conductor-like Screening model for Real Solvents (COSMO-RS). The results obtained were compared with experimental values. The COSMO-RS predictions have shown high accuracy in reproducing the trends of aqueous solubilities for both temperature and salinity. The proposed methodology was then applied to predict the aqueous solubilities of 19 nitro compounds in the temperature range of 5-50 °C in saline solutions. The salting-out parameters of the Setschenow equation were also calculated. The predicted salting-out parameters were overestimated when compared to the measured values, but these parameters can still be used for qualitative estimation of the trends.     

Cosolvent effects of alcohols on the Henry's law constant and aqueous solubility of tetrachloroethylene (PCE)

The effects of selected cosolvents ethyl alcohol (EtOH), isopropyl alcohol (IPA), and tertbutyl alcohol (TBA) on the Henry's law constant (H) of tetrachloroethylene (PCE) in aqueous solutions were investigated using the static headspace method. Alcohols in solution at a concentration around 20% and above acted as cosolvents increasing the aqueous solubility of PCE, which resulted in lower H values for PCE as compared to the value of H in deionized water. TBA, the most hydrophobic of the three alcohols, exhibited the strongest cosolvent effects, while EtOH had the weakest effects. A ln-linear relationship was observed between H and the volumetric fraction of alcohol added. Investigation of the solubilization of PCE in alcohol solutions confirmed the cosolvent trend observed for the three alcohols. A ln-ln relationship was observed between H and the enhanced solubility of PCE at a particular alcohol concentration. It was also observed that the value of H is a function of the enhanced solubility regardless of the type of cosolvent used. The results from this research further define the behavior of PCE in alcohol flooding solutions used in the remediation of PCE contaminated media.     

Estimating the aqueous solubility of aromatic hydrocarbons by high performance liquid chromatography

Empirical equations which correlate high performance liquid chromatography capacity factor (k′) to aromatic hydrocarbon aqueous solubility are developed. The correlations of k′ to octanol-water partition coefficients, and k′ to hydrocarbon surface area are also shown.     

Partitioning of polychlorinated biphenyls in octanol/water, triolein/water, and membrane/water systems

The use of the octanol/water partition constant (Kow) as a surrogate parameter for lipid/water partitioning of persistent organic pollutants (POPs) was reassessed by comparing the measured Kow of 12 selected polychlorinated biphenyl congeners (PCBs) with partition constants in triolein/water (Ktw) and membrane/water (Kmw) systems. Kow and Ktw were measured by the slow-stirring method. Kmw was measured by an adaptation of the slow-stirring method using suspensions of phosphatidylcholine and phosphatidylserine liposomes. Partitioning of POPs to octanol, triolein, and liposomes is similar but not equal. The log-log correlation for Kow and Ktw is excellent (r2 = 0.982) and that for Kow and Kmw is somewhat weaker (r2 = 0.856). Ktw values are greater than Kow by a factor of 1.6. Kmw of some PCB congeners exceed both Kow and Ktw by an order of magnitude. The differences are attributed to different PCB activity coefficients in the different lipid phases. The results imply that Kow can be used as a reasonable conservative estimate of lipid/water partitioning. But the observed differences between Kow and Kmw also indicate that using Kow to predict accumulation of POPs, particularly highly hydrophobic ones, in the polar lipids of organisms will underestimate their concentrations at equilibrium.     

Transfer of pesticides to the brew during mate drinking process and their relationship with physicochemical properties

In order to evaluate the extraction of pesticide residues that are transferred to the brew during mate drinking process of P.U.1 yerba mate leaves (Ilex paraguariensis), a special device to simulate the way in which mate is drunk in Uruguay was developed. The transfer to the brew of 12 organophosphates, 5 synthethic pyrethroids and one organochlorine pesticide from spiked samples was studied. The relationship between the transfer data thus obtained and physicochemical properties like water solubility (Ws), octanol-water coefficient (Kow) and Henry's constant (H) was evaluated. The extractability of the pesticide residues from yerba mate can be correlated with log Ws and log Kow. These transfer values allowed the calculation of ARLs (acceptable residue level) for the pesticides following Food and Agriculture Organization (FAO), World Health Organizaion (WHO) guidelines. These results can help the future establishment of maximum residue levels (MRLs).     

Three-dimensional, quantitative-structure-property-relationship study of aqueous solubility for phenylsulfonyl carboxylates using comparative-molecular-field analysis and comparative-molecular-similarity-indices analysis.

With both the comparative-molecular-field analysis (CoMFA) and the comparative-molecular-similarity-indices analysis (CoMSIA), the paper describes two five-component, three-dimensional, quantitative-structure-property-relationship (3D-QSPR) models for the aqueous solubility logSw (Sw, mol x L(-1)) of 52 phenylsulfonyl carboxylates. Two models yield the leave-one-out cross-validated correlation coefficient q2 values 0.851 and 0.821, and the conventional correlation coefficient r2 values 0.963 and 0.929, respectively. The achievement of high q2 and r2 values of the CoMFA model indicates the significance of correlation of steric and electrostatic fields with the aqueous solubility. The key features in the CoMFA contour maps are critical to trace the important properties and gain insight to the solvation mechanism of tested compounds. The quality of CoMSIA model is slightly lower than that of CoMFA in terms of q2 and r2 values. Not requiring molecular superposition, CoMSIA may be faster than CoMFA in data processing.     

Transfer of pesticides to the brew during mate drinking process and their relationship with physicochemical properties

In order to evaluate the extraction of pesticide residues that are transferred to the brew during mate drinking process of P.U.1 yerba mate leaves (Ilex paraguariensis), a special device to simulate the way in which mate is drunk in Uruguay was developed. The transfer to the brew of 12 organophosphates, 5 synthethic pyrethroids and one organochlorine pesticide from spiked samples was studied. The relationship between the transfer data thus obtained and physicochemical properties like water solubility (Ws), octanol-water coefficient (Kow) and Henry's constant (H) was evaluated. The extractability of the pesticide residues from yerba mate can be correlated with log Ws and log Kow. These transfer values allowed the calculation of ARLs (acceptable residue level) for the pesticides following Food and Agriculture Organization (FAO), World Health Organizaion (WHO) guidelines. These results can help the future establishment of maximum residue levels (MRLs)     

Degradation of tetraphenylphosphonium bromide at high pH and its effect on radionuclide solubility

Recently, tetraphenylphosphonium bromide (TPPB) has been used to remove technetium from some radioactive waste streams. However, before TPPB could be approved for use it was necessary to show that TPPB and its degradation products would not have a significant detrimental effect on post-closure performance of a radioactive waste repository. TPPB is known to be stable at neutral pH, however, under alkaline conditions it degrades by an alkaline hydrolysis mechanism to triphenylphosphonium oxide (TPPO). Degradation can also occur by radiolysis to produce triphenylphosphine (TPP). The kinetics of the alkaline hydrolysis degradation of TPPB is described and the solubility of europium, iodine, nickel, technetium(VII) and uranium(VI) in aqueous solutions of TPPB and its degradation products is reported. These results were used to support the use of TPPB in removing technetium from some waste streams.     

Partial solubility parameters of chlorobenzene and chlorophenol compounds at equilibrium distribution in two immiscible phases

Partial solubility parameters of chlorobenzene and chlorophenol compounds at equilibrium distribution in two immiscible phases such as soil-water system were studied. An integral distribution equilibrium equation is derived from the concept of partial solubility parameters and Flory-Hungins equation. Twelve chlorobenzenes and nineteen chlorophenols were employed in this study and their partial solubility parameters including dispersion( (δ_d),and polar van der Waals (δ_p), as well as their electron acceptor and donor solubility parameters (δ_a and δ_b) were calculated.Hildebrand's solubility parameter(δ) of the compounds was also obtained by using boiling point and formula.HPLC was performed by octadecyl-bonded phase as the stationary phase with methanol or acetonitrile as the mobile phase to determine the capacity factor k′ of all compounds for the calculation of δ_a and δ_b.