Organotin Compounds and Selected Metals in the Marine Environment of Northern Adriatic Sea

The extent of pollution with organotin compounds and Cd, Pb, Ni, Cu, Zn, Cr, Mn, V, Co and Al was investigated in sediments and mussels (Mytilus galloprovincialis) from the Slovenian costal area of the Northern Adriatic Sea. Sampling was performed in Marina Portorož, Dockyard Izola, non exposed area of the Bay of Mesečev zaliv and in Mariculture Sečovlje. Mussels were taken in the summer and winter time, while sediments were collected during the winter sampling. Organotin compounds were determined by gas chromatography—mass spectrometry and metals by flame or electrothermal atomic absorption spectrometry. The accuracies of the analytical procedures were checked by the analysis of standard reference materials CRM 477 mussel tissue and PACS 2 marine sediment (organotin compounds) and SRM 2976 mussel tissue and CRM 320 river sediment (metals). Good agreements between certified and determined values were obtained. Normalization procedure to Al was applied to estimate the anthropogenic inputs of metals in sediments. The analyses of sediments demonstrated moderate pollution with organotin compounds in Marina Portorož and in Dockyard Izola. Concentrations of tributyltin species were higher than those of dibutyltin and monobutyltin. In mussels substantial contamination with tributyltin was observed in Marina Porotrož and Dockyard Izola. The extent of pollution was higher in the winter time. The analysis of metals in sediments exhibited elevated concentrations in Marina Portorož and Dockyard Izola. Data from the normalization procedure indicated the anthropogenic inputs of Cu, Zn and Cr in Marina Portorož and Mn in Bay of Mesečev zaliv and Dockyard Izola. Mussels, as accumulators of pollutants, in general contained higher metal concentrations during winter time in Dockyard Izola.     

Organochlorine pesticide contamination in marine organisms of Yantai coast,northern Yellow Sea of China

To evaluate the contamination of organochlorine pesticides (OCPs) in marine organisms and their potential health risk on consumers in the northern Yellow Sea of China, mollusks, wild shrimps, and crabs were collected from the Yantai coast, and the OCP contents in the samples were analyzed and compared. The results indicate that all the samples have been contaminated by OCPs, and OCP concentrations varied in individual species and in sampling sites. Among the studied OCPs, ∑HCH and ∑DDT concentrations ranged from 0.91 to 13.92 ng g^?1 and from 10.16 to 411.19 ng g^?1, respectively. Meretrix was highly enriched with HCHs, while the highest DDT concentration was found in Crassostrea. For the OCP isomers, β-HCH was the predominant isomer of HCHs, and p,p′-DDE concentration was much higher than other isomers of DDTs. The concentrations of other OCPs (HCB, t-CHL, endrin, and mirex) were relatively low. For the shrimp and crab samples, Alpheus distinguendus samples accumulated a higher level of HCHs but lower DDTs than Oratosquilla aratoria and Carcinoplax vestitus in all sampling areas. HCHs in the samples of contrast area were not significantly lower than that of the sewage outfall area and port area, whereas DDTs in the samples of contrast area were relatively lower than that of the other two areas. Generally, all the OCP contents in the samples are in the range of the edible hygienic criteria except the total concentration of DDTs in Crassostrea.     

Mass occurrence of the ctenophore Bolinopsis vitrea (L. Agassiz, 1860) in the nearshore southern Adriatic Sea (Kotor Bay, Montenegro)

The ctenophore Bolinopsis vitrea has been rarely observed in the Mediterranean Sea. A bloom of B. vitrea is here reported for the first time in the southern Adriatic Sea in the spring and summer of 2009, together with its effect on the plankton of Kotor Bay. Ctenophores were found below 5 m depth only. Results of the investigation indicate that mass occurrence of B. vitrea could have a great impact on the Kotor Bay ecosystem. Their predation on copepods would reduce grazing pressure on phytoplankton, favouring an uncommon bloom of the latter. It is evident that B. vitrea are capable of altering rapidly the composition and biomass of coastal plankton communities when present in large masses. This first evidence of such events for this species may indicate changes in the functioning of marine ecosystems of the southern Adriatic.     

Benthic foraminifera from polluted marine environment of Sulaibikhat Bay (Kuwait)

Quantitative analyses of recent benthic foraminiferal assemblages (living and dead) were carried out on the surface sediments of Sulaibikhat Bay. Marked contrast in foraminiferal assemblages between the shallow tidal mudflats and the deep tidal channel and their relation to the extent of pollution were observed. Cluster analysis of quantitative data on the distribution of foraminiferal tests revealed three assemblages that depend mainly on the intensity of pollution; (1) a highly polluted tidal flat assemblage, (2) normal (or less polluted) mud flat assemblage and, (3) tidal channel and subtidal assemblage. The highly polluted assemblage characterized by a drop in species densities (< 100 tests/20 cm(3) sediment) but with high average diversity (5.8 Yule-Simpson Index). The microfauna of the less polluted flat displays relatively lower diversity (4.6) but high density of tests (47.2% of the total picked tests). The most abundant species of this assemblage is Ammonia tepida, displays its maximum density in this assemblage. Ammonia tepida drops in density from 17.12% to 3.07% in the polluted assemblage. Tidal channel foraminiferal assemblages should normally display lower diversities than those of tidal flats, because tidal current in the channels tend to wash away most nutrient materials. However, this is not the case of the present study area which could be due to environmental setting of the Sulaibikhat Bay in which tidal currents bring in exceptionally high amounts of nutrients from Shatt Al-Arab Estuary and in which the tidal flats are strongly and adversely polluted.     

Occurrence of potential bacterial pathogens in coastal areas of the Adriatic Sea

A monitoring program was carried out in bathing waters along the sea-coast of the Adriatic Sea. The investigation was aimedat obtaining a quali-quantitative picture of microorganisms ofanthropic origin and of a more strictly autochthonous origin and at verifying the existence of possible reciprocal correlations and combinations of relationship between them. Results showed that the concentrations of indicators of faecal contamination, whether within or over the values established by legislation, are not always related to the presence and density of microorganisms of environmental origin but the regression modelsused can help to describe how these latter microorganisms can bein relation to levels of the other parameters. The difficultyis evident of the predictability of health effects swimming-associated; for this reason more complex models that are currently used should be taken into account for minimising the risk for bathers.     

Monitoring of cyclic organochlorines in the marine environment

Cyclic organochlorines are highly hydrophobic chemicals which usually possess a high persistence to microbial breakdown. These behavioural aspects determine the suitability of each environmental compartment for monitoring purposes, which is discussed.It is concluded, that monitoring of (cyclic) organochlorines should only be executed for compounds about which solid information is available on their environmental behaviour in abiotic and biotic environmental compartments. Under these conditions benthic invertebrates which use glycogen as their main energy-depot, appear to be the most suitable tool for environmental monitoring of lipophilic compounds. Concentrations should be expressed on the basis of (total) extractable lipids.The organisms to be compared should be sampled at a time when they have a similar physiological condition. This does not automatically mean synoptic sampling.Multi-component mixtures, such as PCB's, should be monitored on the basis of (selected) individual components in order to account for differences in behaviour of each component between different environmental compartments and animal species.Some representatives of the compounds discussed are strong inducers of mixed function oxygenase (MFO) enzyme systems. Therefore it should be investigated, if monitoring of MFO activity in addition to concentrations can be regarded as an early warning system of additive effects.     

Monitoring the quality of the marine environment

As part of the monitoring program from Instituto Hidrográfico, since 1981 sediment and water samples have been collected from four different estuarine areas located along the continental coast of Portugal. The concentrations of different parameters were measured in the water and sediment samples. After normalization, the concentrations of chromium, mercury, lead and zinc in the sediments from the different areas were compared.     

Aliphatic and polycyclic aromatic hydrocarbons in sediments of the Slovenian coastal area (Gulf of Trieste, northern Adriatic)

The distribution and sources of aliphatic and polycyclic aromatic hydrocarbons (PAH) were determined in sediments at seven sites around the Slovenian coastal area. The potential toxicological significance was also assessed using biological thresholds. The results of the analyses showed higher concentrations of hydrocarbons in the Port of Koper and in the Marina of Portoroz. The influence of pollution was also evident in rather higher concentrations of hydrocarbons in the surrounding area in the Bays of Koper and Piran. Concentrations of hydrocarbons decrease toward the central part of the Gulf of Trieste. The major component of the aliphatic fraction was the unresolved complex mixture. Concentrations of the total resolved aliphatic hydrocarbons were in a range from 689 to 3,164?ng?g^?1. Concentrations of the total PAHs were between 330 and 1,173?ng?g^?1. Polycyclic aromatic hydrocarbons are primarily of pyrolytic origin with some smaller contributions of the petrogenic, while the aliphatic are mostly of petrogenic origin with significant amounts of biogenic derived compounds of terrestrial and marine origin. Strong evidence of the diagenetic origin of perylene in the investigated area was also found. Quite a good linear relationship between PAH concentration and TOC and between aliphatic hydrocarbon concentrations and TOC was observed. The principal component analysis showed differences between the nearshore and offshore sites. In general, the investigated area is moderately contaminated by hydrocarbons. Concentrations of PAHs, hydrocarbons of high concern, are below the levels (effects range low and the effects range median) associated with adverse biological effects.     

Detecting and characterising sources of persistent organic pollutants (PAHs and PCBs) in surface sediments of an industrialized area (harbour of Trieste, northern Adriatic Sea)

A sediment sampling based on a two-dimensional mapping was performed in the harbour of Trieste (northern Adriatic Sea), considering 28 sites exposed to pollutant inputs from harbour and industrial activities. Polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) were determined in surface sediments, because these very persistent pollutants seem to be responsible for the depletion of benthic populations observed in this area. The correlation matrix indicates that PAHs and PCBs are non-correlated, and probably have different sources. Both cluster analysis performed on the sampling sites and graphical drawing of the PAH sediment contents make it possible to locate along the shoreline a band of more polluted sediments, clustered around a site facing a steelmaking factory, to be considered as the main source point for PAHs. The evaluation of phenanthrene to anthracene (P/AN) and fluoranthene to pyrene (FL/PY) ratios permits the assessment of the pyrolytic, industrial origin of these PAHs, rejecting a second possible source of hydrocarbons (i.e., an oil-pipeline terminal, situated near the steelmaking factory). Graphical drawing of the total PCB iso-concentrations reveals a different source-point for this other category of very persistent pollutants.     

Trace element content in marine algae species from the Black Sea, Turkey

Trace element content of marine algae species collected from the Black Sea coasts were determined by atomic absorption spectroscopy after microwave digestion. Trace element content in marine algae species were 1.70-17.1 microg/g for copper, 3.64-64.8 microg/g for zinc, 9.98-285 microg/g for manganese, 99-3,949 microg/g for iron, 0.50-11.6 microg/g for chromium, 0.27-36.2 microg/g for nickel, 11-694 microg/kg for selenium, 0.50-44.6 microg/kg for cadmium, 1.54-3,969 microg/kg for lead, 1.56-81.9 microg/kg for cobalt. While iron was the highest trace element concentration, cadmium was the lowest in samples. Most of the analyzed samples were edible. The samples are consumed for human diet in several countries.     

Dioxin-like compounds in pine needles around Tokyo Bay, Japan in 1999

Pine needle samples collected at ten spatially distant sites around Tokyo Bay in 1999 indicated a widespread lower troposphere pollution with ultra-trace dioxin-like compounds such as chlorodibenzo-p-dioxins (PCDDs), -furans (PCDFs), non-ortho- and mono-ortho-chlorobiphenyls (pPCBs), and -naphthalenes (PCNs). Elevated concentration of planar PCBs and the total PCNs were found at the sites which are located innermost to the Bay, suggesting the regional importance of the evaporative nature of the source of pollution by those compounds over this vast area. The concentrations and profiles for PCDDs and PCDFs remained largely uniform. An exception was the site near the town of Tateyama in the Chiba Prefecture, which is the southernmost but also relatively separate from the inner Bay. The site near Tateyama showed somehow background contamination with all compound groups and highly different profiles of PCNs. The principal component analysis (PCA) of the data matrix has revealed that around the Tokyo Bay, apart from the evaporative emission sources for PCNs and PCBs, combustion related processes also play an important role as sources of the ambient air contamination not only with PCDDs/Fs but also with chloronaphthalenes and planar chlorobiphenyls.     

Distribution of HCH and DDT in the coastal marine environment of Mumbai,India

Organochlorine pesticides (OCPs) in sediment, water and biota samples from the coastal marine environment of Mumbai were analysed to elucidate their distribution in various environmental compartments. HCH isomers, dichlorodiphenyltrichloroethane (DDT) and its metabolites were the predominantly identified compounds in all the samples. High ratios of DDT to dichlorodiphenyldichloroethylene (DDE) were found in seawater samples. This indicates the presence of a significant source of DDT in this region. In sediment samples, the gamma-isomer contributed almost 55% to the total HCH, indicating a high affinity of the gamma-isomer towards the sediment. The levels of organochlorines in fish obtained from this region were found to be lower than the levels of organochlorines in fish in temperate regions.     

Controlling factors of phytoplankton seasonal succession in oligotrophic Mali Ston Bay (south-eastern Adriatic)

Fine spatial and temporal phytoplankton variability in Mali Ston Bay has been observed for the first time based on physicochemical properties and small herbivorous zooplankton. Extensive year-through research was conducted during 2002 at Usko station which is traditionally an area of intensive shellfish farming. The Neretva River inflow, submarine springs (“vruljas”) and precipitation are additional sources of nutrients in the bay. Temperature and salinity, combined with total inorganic nitrogen (TIN) were observed to be the most important environmental factors driving the succession of phytoplankton communities. Orthophosphate was a potential limiting factor for phytoplankton development. The nanophytoplankton abundances, as well as the microphytoplankton diatoms are controlled by herbivorous zooplankton grazing (‘top-down’ control) more than other groups of microphytoplankton. Nanophytoplankton dominated phytoplankton abundance and its most intensive development was recorded in winter and spring, while increase in microphytoplankton abundance occurred in spring and autumn. Diatoms dominated microphytoplankton abundance mostly in winter and autumn, while dinoflagellates dominated in spring and summer. Considering the number of taxa and abundance, dinoflagellates were the dominant microphytoplankton group during the year and were the main component of the spring blooms. At that time, in conditions of elevated temperature (>16 °C), decreased salinity (34–36) and increased concentrations of TIN, blooms of harmful dinoflagellate Prorocentrum minimum were recorded for the first time in the bay. The results showed a significant difference in environmental conditions, as well as in the annual phytoplankton succession and community structure, as compared with studies carried out more than 20 years ago in this area.     

Monitoring of a Coastal Mediterranean Area: Culturable Bacteria, Phytoplankton, Environmental Factors and their Relationships in the Southern Adriatic Sea

Culturable heterotrophic bacterial and phytoplanktonic densities were investigated at four sites in the Southern Adriatic Sea (Brindisi, S. Cataldo, Otranto and S. M. di Leuca) over an annual cycle. The main phytoplankton groups, the bacterial biodiversity, as well as the faecal contamination indicators were determined. Culturable bacterial numbers averaged 4.8 ± 0.2 log CFU ml⁻¹ whereas phytoplankton numbers averaged 2.1 ± 0.4 log cells ml⁻¹. Relationships between culturable bacteria, phytoplankton and the environmental factors were established. Bacterial and phytoplankton densities usually depended significantly on temperature, dissolved oxygen, phosphate and nitrite only in the S. Cataldo transect. In all the examined transects phytoplankton showed a bloom during the January–February period followed by a bacterial peak during the February–March period. Thus we can suppose that the phytoplankton winter bloom is responsible for the availabily of organic matter for bacterial populations in the following months in this oligotrophic ecosystem.     

Heavy metal in surface sediments of the Liaodong Bay, Bohai Sea: distribution, contamination, and sources

In an effort to assess the potential contamination and determine the environmental risks associated with heavy metals, the surface sediments in Liaodong Bay, northeast China, were systematically sampled and analyzed for the concentrations of Cu, Pb, Zn, Cr, Ni, As, and Hg. The metal enrichment factor (EF) and geoaccumulation index (I _geo) were calculated to assess the anthropogenic contamination in the region. Results showed that heavy metal concentrations in the sediments generally met the criteria of China Marine Sediment Quality (GB18668-2002); however, both EF and I _geo values suggested the elevation of Pb concentration in the region. Based on the effect-range classification (TEL-PEL SQGs), Cu, Pb, Ni, and As were likely to pose environment risks, and the toxic units decreased in the order: Ni?>?Pb?>?Cr?>?Zn?>?As?>?Cu?>?Hg. The spatial distribution of ecotoxicological index (mean-ERM-quotient) suggested that most of the surface sediments were “low–medium” priority zone. Multivariate analysis indicated that the sources of Cr, Ni, Zn, Cu, and Hg resulted primarily from parent rocks, and Pb or As were mainly attributed to anthropogenic sources. The results of this study would provide a useful aid for sustainable marine management in the region.     

Assessment of trace metal pollution in surface sediments of Nemrut Bay, Aegean Sea

Surface sediments collected from nine stations in Nemrut Bay, Aegean Sea were analyzed for trace metals (Hg, Cd, Pb, Cr, Cu, Zn, Mn, Ni, Fe, As, and Mg) and grain sizes. The results were compared with the numerical sediment guidelines used in North America as well as literature values reported for similar studies conducted in Izmit Bay and Izmir Bay. The metal levels were also evaluated according to the enrichment factor and contamination factor analyses. The analyses revealed significant anthropogenic pollution of Hg, Pb, Zn, and As in the surficial sediments of Nemrut Bay.     

State of the marine environment at Little Bay Arm,Newfoundland and Labrador,Canada, 10 years after a "do nothing" response to a mine tailings spill

In 1989, the tailings pond dam at the site of a former copper mine near Little Bay, Newfoundland and Labrador, Canada, ruptured and tailings spilled into Little Bay Arm. At the time, no action was taken to arrest the flow of tailings or to mitigate the effects of the spill. To date, no action has been taken to repair the dam and tailings continue to flow into Little Bay Arm. As a result, the marine environment around Little Bay Arm has become contaminated with heavy metals from the tailings. However, the tailings are not the only source of heavy metals to the ecosystem. An old slag heap and what is presumably concentrated copper ore spilled during the loading of ore freighters, are also contributing to the ecosystem's metal load. Marine sediment throughout the Arm contained elevated concentrations of Cu, Ni, Zn, As, V, Co, and Mn. Beach material also contained elevated concentrations of metals with material near the slag heap being the most contaminated. At this site, Cu concentrations were in excess of 5000 mg kg(-1) dry weight, Zn greater than 3000 mg kg(-1) and Co concentrations exceeded 700 mg kg(-1). The highest concentrations of metals in biota were found near the slag heap, near the tailings dam breach, and at the site of the former concentrate loading dock. Despite elevated metal concentrations, the tailings and nearby sediment were not devoid of life. Bivalves and seaweed were abundant in the area and there were no obvious signs of tissue damage or disease in soft shell clams (Mya arenaria) living in the tailings. These clams may be suffering from chronic exposure to the tailings, however, evidence of lipid peroxidation in the clams was inconclusive.     

Monitoring of fate and effects of oil in the marine environment

Examples are presented of different techniques which are in use, or could be used, to monitor the fate and effects of oil pollution in Dutch marine waters by oil spills and chronic contamination by rivers, processing water from the oil industry, etc.A number of techniques are presented to quantify the fate of oil in water, sediments and biota, and some readily available methods to monitor possible effects in the ecosystem.In Dutch coastal waters much effort is being given to airborne detection of oil at the sea surface in order to reduce pollution and to take rapid measures in cases of severe pollution. Oil concentrations in sediments and selected organisms can be monitored as a general quality control measure, and to check the functioning of licensed installations. If concentrations above background levels are found, research on possible effects should be initiated. In this context short term studies on stress-indicators are very useful. Laboratory based investigations, for example in model ecosystems, can be carried out to test hypotheses from such studies. Elevated oil concentrations and indications for ecological effects may result in changes in the management of the marine area in question. Monitoring of population dynamics and species composition, notably of benthic macrofauna, should be carried out to verify long-term effects on the ecosystem.     

Assessing heavy metal pollution in the recent bottom sediments of Mabahiss Bay, North Hurghada, Red Sea, Egypt

Thirty-nine samples of recent bottom sediments were collected from Mabahiss Bay, north of Hurghada City, Red Sea, Egypt. The collected samples were subjected to a total digestion technique and analyzed by absorption spectrometer for metals including Pb, Zn, Cd, Ni, Co, Cu, and Mn. Concentration data were processed using correlation analysis, principal component analysis, and hierarchical cluster analysis. Multivariate statistical analysis classified heavy metals in the study area into different groups. The pollution level attributed to these metals was evaluated using geoaccumulation index and contamination factor in order to determine anthropogenically derived sediment contamination. The results of both geoaccumulation index and contamination factor results reveal that the study area is not contaminated with respect to Zn, Ni, Cu, and Mn; uncontaminated to moderately contaminate with Pb; and moderately to strongly contaminate with Cd. The high contents of Pb, Cd, and Co in the study area result from various anthropogenic activities including dredging, land filling, localized oil pollution, using of antifouling and anticorrosive paints from fishing and tourist boats, and sewage discharging from various sources within the study area.     

Zoning for eco-geological environment before mining in Yushenfu mining area,northern Shaanxi,China

Zoning for the eco-geological environment (EGE) aims to protect and improve the regional ecological environment. It is the basis for evaluating the ecological characteristics of a mining area prior to mining activities and has the purpose of implementing water-preserved mining according to zoning type. In this study, four EGE types were proposed following field investigation in the Yushenfu mining area: oasis type with phreatic water and bottomland in desert (OTPWBD), oasis type with surface water and valley river (OTSWVR), loess gully type with surface runoff (LGTSR), and regional deep groundwater enrichment type (RDGET). Nine EGE evaluation indices were selected: rainfall, evaporation capacity, Luohe formation thickness, surface elevation, Sara Wusu aquifer water abundance, surface lithology, topography, slope, and normalized difference vegetation index (NDVI). Remote sensing technology and geographic information systems were first used to generate the evaluation index thematic maps. Then, the weight of each evaluation index was determined based on an analytic hierarchy process (AHP). Third, the index weight was used to form an improved weighted fuzzy C s clustering algorithm, and EGE zones were assigned using the MATLAB computing platform. For comparison, the AHP was also adopted for EGE zoning and a map of zoning differences was obtained. Finally, EGE field surveys of typical mines were carried out, which verified that EGE zoning using fuzzy clustering was accurate and reasonable.