Solid phase extraction of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) ions with 1-(2-thiazolylazo)-2-naphthol loaded Amberlite XAD-1180

A new method for separation and preconcentration of trace amounts of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) ions in various matrices was proposed. The method is based on the adsorption and chelation of the metal ions on a column containing Amberlite XAD-1180 resin impregnated with 1-(2-thiazolylazo)-2-naphthol (TAN) reagent prior to their determination by flame atomic absorption spectrometry (FAAS). The effect of pH, type, concentration and volume of eluent, sample volume, flow rates of sample and elution solutions, and interfering ions have been investigated. The optimum pH for simultaneous retention of all the metal ions was 9. Eluent for quantitative elution was 20 ml of 2 mol l(-1) HNO(3). The optimum sample and eluent flow rates were found as 4 ml min(-1), and also sample volume was 500 ml, except for Mn (87% recovery). The sorption capacity of the resin was found to be 0.77, 0.41, 0.57, and 0.30 mg g(-1) for Cu(II), Ni(II), Cd(II), and Mn(II), respectively. The preconcentration factor of the method was 200 for Cu(II), 150 for Pb(II), 100 for Cd(II) and Ni(II), and 50 for Mn(II). The recovery values for all of the metal ions were > or = 95% and relative standard deviations (RSDs) were < or = 5.1%. The detection limit values were in the range of 0.03 and 1.19 microg l(-1). The accuracy of the method was confirmed by analysing the certified reference materials (TMDA 54.4 fortified lake water and GBW 07605 tea samples) and the recovery studies. This procedure was applied to the determination of Cu(II), Ni(II), Pb(II), Cd(II) and Mn(II) in waste water and lake water samples.     

Analysis of Pesticides Using a Polyppyrole Modified Electrode

Electrochemical methods can provide fast, sensitive and sometimes real time detection of pesticides. In the course of this work, a dispersed mercury electrode has been used to detect pesticides electrochemically. The electrode was prepared by depositing a thin mercury film on a glassy carbon disc and then coating a layer of polypyrrole on the disc. The effect of coating thickness on detection sensitivity was studied. A thin mercury film of 0.34 µm dispersed by one cycle polymerization of pyrrole was preferred. The influence of electrolyte, pH and organic solvent content on pesticide response was also investigated. The polypyrrole dispersed mercury electrode (Hg-PPy/GC) was not suitable for a pH above 6 but it can tolerate acetonitrile up to 10% at which concentration the mercury film coated glassy carbon electrode (Hg/GC) failed to response. Methyl parathion, methyl azinphos, parathion and fenitrothion were detected. The sensitivity of the dispersed mercury electrode was similar to a normal thin mercury film electrode in this case. A good response can be obtained for 1 ppm pesticides using fast linear sweeping voltammetry.     

Formation of a Mercury Plated Carbon Paste Electrode by Electroreduction of a Mercury(II) Diethyldithiocarbamate Modified Carbon Paste

A novel approach to formation of a mercury film electrode (MFE) at the surface of a carbon paste electrode is proposed in this paper. This MFE is easy to fabricate, has good reproducibility and avoids the use of a plating mercury solution. In this new type of MFE, mercuric diethyldithiocarbamate (Hg(DDTC)2) was mixed with graphite powder and paraffin oil to form a chemically modified carbon paste electrode. When a -0.95V potential was applied to the electrode, the Hg(II) (in Hg(DDTC)2) was reduced to metallic Hg, thus forming a mercury film at the surface of the carbon paste electrode. The characteristics of this MFE were studied. This modified electrode was used in anodic stripping voltammetry. Conditions for the simultaneous determination of trace amount of Pb(II) and Cd(II) were also investigated.     

The efficiency of Amberlite XAD-4 resin loaded with 1-(2-pyridylazo)-2-naphthol in preconcentration and separation of some toxic metal ions by flame atomic absorption spectrometry

A selective method has been developed for the determination of trace amount of metal ions after preconcentration on 1-(2-pyridylazo)-2-naphthol loaded Amberlite XAD-4 resin. The chelating resin was characterized on the basis of infra red spectra, thermal and chemical stability, and hydrogen ion capacity. High preconcentration factor of 160?C400 up to a low preconcentration limit of 10 ??g L^???1 has been achieved for almost all the metals. The chelating resin was highly selective even in the presence of large concentrations of alkali and alkaline earth metals and various matrix components. Chromatographic separation of metal ions in binary mixtures has been accomplished. The analytical utility of the resin for metal ions was explored by analyzing natural water and standard reference materials.     

Triethoxysilyl-substituted aminoethanethiol ligands for zinc and cadmium complexes and aminoethanethiol-modified silica gel. Evaluation of the corresponding supported molecular trap for metallic pollutant uptake (Cd2+, Hg2+ and Pb2+)

The reaction of 2-[3-(triethoxysilyl)propylamino]ethanethiol (LH, a) and 1-methyl-2-[3-(triethoxysilyl)propylamino]ethanethiol (LH, b) with ZnX2 and CdX2 (X = Cl, Br, I, NO3) in tetrahydrofuran (THF) or CH2Cl2 gives several complexes depending on the experimental conditions. Elemental analyses, IR, Raman, 13C[1H], 1H NMR and mass spectroscopies indicated the formation of mononuclear and dinuclear complexes. In the absence of NEt3 as proton quencher, the protonated ligands react in their zwitterionic form giving dinuclear [M(LH)X2]2 [M = Zn (1), Cd (2); LH = a, b; X = Cl, Br, I] or mononuclear M(NO3)2(LH)2 [M = Zn (5), Cd (6); LH = a] complexes. In both cases, coordination occurs through the S atoms, the ligands acting as terminal and bridging species. With NEt3, the deprotonated ligands are chelated through their N and S atoms and bridging occurs through the S atoms in [MLX]2 [M = Zn (3), Cd (4); LH = a; X = Cl, Br] complexes. The LH ligand is chemically grafted onto silica, the procedure optimized and the resulting material characterized by 13C and 29Si cross-polarization, magic-angle spinning (CP-MAS) NMR and DRIFT. This material is evaluated as a supported molecular trap for binding heavy metals (Cd2+, Hg2+, Pb2+) in aqueous solution. In both batch and column processes, it appears that Hg2+ and Pb2+ are trapped more than Cd2+, but in all cases values lower than those allowed were obtained.     

PAN-S树脂富集钴的分光光度法测定研究

研究了PAN—S浸渍树脂对Co^2＋的吸附性能。Co^2＋吸附pH值范围为4．7—9．2,最佳pH值为5．4;达到最大吸附容量需25min,树脂对Co^2＋平衡吸附容量是98mg／g干树脂,达到最大吸附容量平衡时用0．1mol／L的HNO,洗脱,洗脱率达98％。该方法建立了PAN—S-树脂富集一分离钴离子的分光光度测定方法,结果令人满意。     

Reduction and immobilization of chromium(VI) by nano-scale Fe0 particles supported on reproducible PAA/PVDF membrane

A new class of nano-scale Fe0 particles (NZVI) supported on a PAA/PVDF membrane (NZVI-PAA/PVDF) were synthesized and the feasibility of using NZVI-PAA/PVDF for reductive immobilization of Cr(VI) in water was investigated through laboratory batch tests. The results showed that the Cr(VI) removal capacity of NZVI-PAA/PVDF was 181 mg Cr/g Fe at an initial Cr(VI) concentration of 20 mg L(-1) under pH 6.5 +/- 0.1. XPS results showed that Cr(VI) was converted to nontoxic Cr(III). Interfering ions exerted various degrees of impact on NZVI-PAA/PVDF's Cr(VI) removal capacity. Specifically, Ca2+ alone showed the mildest impact while the presence of ions (Mg2+ and HCO3-) exerted the greatest impact. An advantage of NZVI-PAA/PVDF is that the nano-scale Fe0 and resultant particles were combined within a PAA/PVDF membrane, which prevents secondary pollution. Moreover, a piece of PAA/PVDF membrane (4.7 cm diameter) can still support 6.51 mg of nano-scale Fe0 particles after being renewed.     

Measurements of gaseous mercury exchanges at the sediment-water, water-atmosphere and sediment-atmosphere interfaces of a tidal environment (Arcachon Bay, France)

The elemental mercury evasion from non-impacted natural areas is of significant importance in the global Hg cycle due to their large spatial coverage. Intertidal areas represent a dynamic environment promoting the transformations of Hg species and their subsequent redistribution. A major challenge remains in providing reliable data on Hg species variability and fluxes under typical transient tidal conditions found in such environment. Field experiments were thus carried out to allow the assessment and comparison of the magnitude of the gaseous Hg fluxes at the three interfaces, sediment-water, sediment-atmosphere and water-atmosphere of a mesotidal temperate lagoon (Arcachon Bay, Aquitaine, France) over three distinct seasonal conditions. The fluxes between the sediment-water and the sediment-atmosphere interfaces were directly evaluated with field flux chambers, respectively static or dynamic. Water-atmosphere fluxes were evaluated from ambient concentrations using a gas exchange model. The fluxes at the sediment-water interface ranged from -5.0 to 5.1 ng m(-2) h(-1) and appeared mainly controlled by diffusion. The occurrence of macrophytic covers (i.e.Zostera noltii sp.) enhanced the fluxes under light radiations. The first direct measurements of sediment-atmosphere fluxes are reported here. The exchanges were more intense and variable than the two other interfaces, ranging between -78 and 40 ng m(-2) h(-1) and were mostly driven by the overlying atmospheric Hg concentrations and superficial sediment temperature. The exchanges between the water column and the atmosphere, computed as a function of wind speed and gaseous mercury saturation ranged from 0.4 to 14.5 ng m(-2) h(-1). The flux intensities recorded over the intertidal sediments periodically exposed to the atmosphere were roughly 2 to 3 times higher than the fluxes of the other interfaces. The evasion of elemental mercury from emerged intertidal sediments is probably a significant pathway for Hg evasion in such tidal environments exhibiting background contamination level.     

Study on determination of iron,cobalt, nickel,copper, zinc and manganese in drinking water by solid-phase extraction and RP-HPLC with 2-(2-quinolinylazo)-5-diethylaminophenol as precolumn derivatizing reagent

A new method for the determination of iron, cobalt, nickel, copper, zinc and manganese in drinking water by the reversed-phase high-performance liquid chromatography (RP-HPLC) with 2-(2-quinolinylazo)-5-diethylaminophenol (QADEAP) as precolumn derivatizing reagent was studied in this paper. The iron, cobalt, nickel, copper, zinc, and manganese ions react with QADEAP to form color chelates in the presence of cetyl trimethylammonium bromide (CTMAB) and acetic acid-sodium acetic buffer solution medium of pH 4.0. These chelates were enriched by solid-phase extraction with a Waters Nova-Pak C18 cartridge and eluted the retained chelates from the cartridge with tetrahydrofuran (THF). The enrichment factor of 100 was achieved. Then the chelates were separated on a Waters Nova-Pak C18 column (3.9 x 150 mm, 5 microm) by gradient elution with methanol (containing 0.2% of acetic acid and 0.1% of CTMAB) and 0.05 mol L(-1) acetic acid-sodium acetic buffer solution (containing 0.1% of CTMAB) (pH 4.0) as mobile phase at a flow rate of 0.5 ml min(-1), and monitored with a photodiode array detector from 450 approximately 700 nm. The detection limits (S/N = 3) of iron, cobalt, nickel, copper, zinc and manganese are 0.8, 1.1, 0.9, 1.1, 1.5 and 2.0 ng L(-1), respectively, in the original sample. This method can be applied to determination at the microg L(-1) level of iron, cobalt, nickel, copper, zinc and manganese in drinking water with good results.     

Surfactant-mediated complex formation for determination of traces amounts of zinc, cadmium, and lead with 4-(2-thiazolylazo) resorcinol and chemometric methods

The partial least squares modeling is a powerful multivariate statistical tool applied to the spectrophotometric simultaneous determination of the divalent ions of zinc, cadmium, and lead based on the formation of their complexes with 4-(2-thiazolylazo) resorcinol in surfactant media. The linear concentration range for zinc, cadmium, and lead were 0.10-1.31, 0.148-1.92, and 0.148-3.70 mg L(?-1), respectively. The experimental calibration set was composed of 36 sample solutions using a mixture design for three component mixtures. The absorption spectra were recorded from 380 through 650 nm. The effect of pH on the sensitivity in determination of zinc, cadmium, and lead was studied in order to choose the optimum pH (pH = 8) for determination. The root-mean-square errors of predictions for zinc, cadmium, and lead were 0.0466, 0.0282, and 0.050, respectively. The proposed method was successfully applied for the determination of zinc, cadmium, and lead in water samples.     

Preparation of 2-mercaptobenzothiazole-derivatized mesoporous silica and removal of Hg(ii) from aqueous solution

Mesoporous silicas (SBA-15 and MCM-41) have been functionalized by two different methods. Using the heterogeneous route the silylating agent, 3-chloropropyltriethoxysilane, was initially immobilized onto the mesoporous silica surface to give the chlorinated mesoporous silica Cl-SBA-15 or Cl-MCM-41. In a second reaction a multifunctionalized N,S donor compound (2-mercaptobenzothiazol) was incorporated to obtain the functionalized silicas denoted as MBT-SBA-15-Het and MBT-MCM-41-Het. Using the homogeneous route, the functionalization was achieved via the one step reaction of the mesoporous silica with an organic ligand containing the chelating functions, to give the modified mesoporous silicas denoted as MBT-SBA-15-Hom or MBT-MCM-41-Hom. The functionalized mesoporous silicas were employed as adsorbents for the regeneration of aqueous solutions at pH 6 contaminated with Hg(ii) at room temperature. Results obtained indicate that mercury adsorption was higher in the mesoporus silicas prepared by the homogeneous method, and the maximum adsorption value (0.24 +/- 0.02 mmol Hg(ii) g(-1)) was obtained for MBT-SBA-15-Hom. The chemically stability in acid medium of the functionalized silicas, possibility its regeneration washing with concentrate HCl, resulting in the reuse of the adsorbent material for several cycles.     

Effect of fertilizer application on ammonia emission and concentration levels of ammonium, nitrate, and nitrite ions in a rice field

The concentrations of ammonium NH4+, nitrate NO3-, and nitrite NO2- ions were recorded along with ammonia (NH(3)) emission from a fertilized rice field located in the Kwangju province in South Korea over a period of 4 months (June to October 2006). The highest magnitude of NH(3) flux was 20,754 microg m(-2) h(-1), while the average flux value over the entire sampling period was 2,395 microg m(-2) h(-1). The highest ionic concentrations were 1.67, 0.44, and 0.71 ppm for NH4+, NO3-, and NO2- ions, respectively. Possible effects of soil pH on NH(3) fluxes were detected, as they concurrently exhibited a gradual and periodic change during the sampling period. Positive correlations existed between concentrations of NH4+ and NO2- ions and the soil pH. Positive correlations also existed between NH(3) emission flux and ambient (and water) temperatures. Results indicated that fertilizer application to rice can lead to significant emission of NH(3) along with NH4+ and NO3- ions.     

Predominant anthropogenic sources and rates of atmospheric mercury accumulation in southern Ontario recorded by peat cores from three bogs: comparison with natural "background" values (past 8000 years)

Peat cores from three bogs in southern Ontario provide a complete, quantitative record of net rates of atmospheric Hg accumulation since pre-industrial times. For comparison with modern values, a peat core extending back 8000 years was used to quantify the natural variations in Hg fluxes for this region, and their dependence on climatic change and land use history. The net mercury accumulation rates were separated into "natural" and "excess" components by comparing the Hg/Br ratios of modern samples with the long-term, pre-anthropogenic average Hg/Br. The average background mercury accumulation rate during the pre-anthropogenic period (from 5700 years BC to 1470 AD) was 1.4 +/- 1.0 microg m(-2) per year (n = 197). The beginning of Hg contamination from anthropogenic sources dates from AD 1475 at the Luther Bog, corresponding to biomass burning for agricultural activities by Native North Americans. During the late 17th and 18th centuries, deposition of anthropogenic Hg was at least equal to that of Hg from natural sources. Anthropogenic inputs of Hg to the bogs have dominated continuously since the beginning of the 19th century. The maximum Hg accumulation rates decrease in the order Sifton Bog, in the City of London, Ontario (141 microg Hg m(-2) per year), Luther Bog in an agricultural region (89 microg Hg m(-2) per year), and Spruce Bog which is in a comparatively remote, forested region (54 microg Hg m(-2) per year). Accurate age dating of recent peat samples using the bomb pulse curve of 14C shows that the maximum rate of atmospheric Hg accumulation occurred during AD 1956 and 1959 at all sites. In these (modern) samples, the Hg concentration profiles resemble those of Pb, an element which is known to be immobile in peat bogs. The correlation between these two metals, together with sulfur, suggests that the predominant anthropogenic source of Hg (and Pb) was coal burning. While Hg accumulation rates have gone into strong decline since the late 1950's, Hg deposition rates today still exceed the average natural background values by 7 to 13 times.     

Diffusive sampling of methyl isocyanate using 4-nitro-7-piperazinobenzo-2-oxa-1,3-diazole (NBDPZ) as derivatizing agent

A diffusive sampling method for the determination of methyl isocyanate (MIC) in air is introduced. MIC is collected using a glass fiber filter impregnated with 4-nitro-7-piperazinobenzo-2-oxa-1,3-diazole (NBDPZ). The urea derivative formed is desorbed from the filter with acetonitrile and analyzed by means of high-performance liquid chromatography (HPLC) using fluorescence detection (FLD) with lambdaex = 471 nm and lambdaex = 540 nm. Additionally, a method was developed using tandem mass spectrometric (MS-MS) detection, which was performed as selected reaction monitoring (SRM) on the transition [MIC-NBDPZ + H]+ (m/z 307) to [NBDPZ + H]+ (m/z 250). The diffusive sampler was tested with MIC concentrations between 1 and 35 microg m(-3). The sampling periods varied from 15 min to 8 h, and the relative humidity (RH) was set from 20% up to 80%. The sampling rate for all 15 min experiments was determined to be 15.0 mL min(-1) (using HPLC-FLD) with a relative standard deviation of 9.9% for 56 experiments. At 80% RH, only 15 min sampling gave acceptable results. Further experiments revealed that humidity did not affect the MIC derivative but the reagent on the filter prior to and during sampling. The sampling rate for all experiments (including long term sampling) performed at 20% RH was found to be 15.0 mL min(-1) with a relative standard deviation of 6.3% (N = 42). The limit of quantification was 3 microg m(-3) (LC-MS-MS: 1.3 microg m(-3)) for 15 min sampling periods and 0.2 microg m(-3) (LC-MS-MS: 0.15 microg m(-3)) for 8 h sampling runs applying fluorescence detection.     

Preconcentration of Zn2+ and Cu2+ ions from food and vegetable samples using modified activated carbon

In this work, two N/S-containing chelating agents 2-(4-methoxybenzylideneamino)thiophenol (2-4-MBAT) and 2-(4-chlorobenzylideneamino) benzenethiol (2-4-CBABT) were synthesized as new sorbents and were used for preconcentration of Zn(2+) and Cu(2+) ions in food and vegetable samples. In the proposed procedure, the trace amount of Zn(2+) and Cu(2+) ions from 250?mL of sample solution at pH?=?5.0 was preconcentrated by 1?g of activated carbon (AC) loaded with 15?mg of 2-4-MBAT and 2-4-CBABT separately. The breakthrough volumes (maximum sample volume that their metal ions quantitatively can be enriched) for solid-phase extraction (SPE) procedure based on the AC modified with 2-4-MBAT and 2-4-CBABT were 800 and 750?mL, respectively. The sorbed Zn(2+) and Cu(2+) ions were efficiently eluted by 8?mL of 4?mol?L(-1) HNO(3) and preconcentration factor of 112.5 and 93.7 and experimental enhancement factor of 30 and 35 ions were obtained for Zn(2+) and Cu(2+), respectively. The application of this enrichment procedure allowed the extraction of trace metal ions with recoveries exceeding of 90%.     

Mercury concentration in fish from Piracicaba River (Minas Gerais, Brazil)

Mercury emissions from some upstream gold mining areas and recent findings of high natural Hg levels in sediments motivated studies on the Hg cycle in the Minas Gerais state. The study presents the total mercury amount found in Geophagus brasiliensis' muscular tissue (wet weight) and sediments from Piracicaba River. Mercury was analyzed using acid digestion followed by determination of total mercury by cold vapour atomic absorption spectrophotometry. This study was also complemented with the analysis of the limnological parameters (water temperature, conductivity, total dissolved solids, suspended particles, pH, dissolved oxygen, maximum depth, photic index and total carbon). The mercury concentration in sediments samples was higher than the mercury concentration in muscular tissue of fish. The lowest Hg level measured in fish was 0.0147 microg g( - 1), while the highest was 0.101 microg g( - 1). In the sediment samples, the lowest and highest levels were 0.02 microg g( - 1) and 0.16 microg g( - 1), respectively. The Hg concentrations in fish and sediment were both under the maximum limit permitted by the World Health Organization.     

Mercury and methyl mercury ratios in caimans (Caiman crocodilus yacare) from the Pantanal area, Brazil

The Pantanal region is the largest floodplain area in the world and of great biological importance due to its unique flora and fauna. This area is continuously undergoing increasing anthropogenic threats, and has also experienced mercury contamination associated with gold mining and other anthropogenic activities. Pantanal caimans are top-level predators, and, as such, show great potential to accumulate mercury (Hg) by biomagnification. In this study 79 specimens from four locations in the Pantanal were analyzed for total Hg and methyl mercury (MeHg) by cold vapor atomic absorption spectrometry. Total Hg contents ranged from 0.02 to 0.36 μg g(-1) (ww), and most specimens presented MeHg ratios above 70%. One of the sites, impacted by anthropogenic activities, presented significantly higher total Hg in comparison to three less impacted sites, supporting the hypothesis that caimans can, in fact, be considered effective bioindicators of ecosystem health.     

Pesticide residues in liquid pekmez (grape molasses)

In this investigation properties of organic semiconductor copper phthalocyanine (CuPc) capacitive humidity and illumination sensors were studied. Organic thin film was deposited by vacuum evaporation on a glass substrate with silver surface-type electrodes to form the Ag/CuPc/Ag sensor. The capacitance of the samples was evaluated at room temperature in the relative humidity range of 35–92%. It was observed that capacitance of the Ag/CuPc/Ag sensor increases with increase in humidity. The ratio of the relative capacitance to relative humidity was about 200. It is assumed that in general the capacitive response of the sensor is associated with polarization due to absorption of water molecules and transfer of charges (electrons and holes). It was observed that under filament lamp illumination of up to 1,000 lx the capacitance of the Ag/CuPc/Ag photo capacitive detectors increased continuously by 20% as compared to dark condition. It is assumed that photo capacitive response of the sensor is associated with polarization due to transfer of photo-generated electrons and holes. An equivalent circuit of the Ag/CuPc/Ag capacitive humidity and illumination sensor was developed. Humidity and illumination dependent capacitance properties of this sensor make it attractive for use in humidity and illumination multi-meters. The sensor may be used in instruments for environmental monitoring of humidity and illumination.     

Cloud water and throughfall deposition of mercury and trace elements in a high elevation spruce-fir forest at Mt. Mansfield,Vermont

As part of the Lake Champlain Basin watershed study of mercury (Hg) and pollutant deposition, cloud water and cloud throughfall collections were conducted at the south summit (1204 m) of Mt. Mansfield, Vermont between August 1 and October 31, 1998, for multi-element chemical analysis. A passive Teflon string collector was deployed during non-precipitating events to sample cloud/fog water at timberline, while three sets of paired funnels collected cloud throughfall under the red spruce-balsam fir canopy. Samples were analyzed for concentrations of Hg, major ions, and 10 trace elements. Ultra-clean sampling and analysis techniques were utilized throughout the study. Six events were sampled for cloud water alone and four events were sampled for both cloud water and cloud throughfall. Cloud throughfall chemistry showed substantial modification from incident cloud water. Much higher concentrations of Hg (2.3 x), base cations (Ca2+, K-, Mg2+; 3-18 x) and certain trace elements (Ni, Cu, Mn, Rb, Sr; 2-34 x) were observed in throughfall than in cloud water. These results confirm that cloud water can leach a wide variety of elements from tree foliage and wash off dry deposited elements. Cloud water deposited an average of 0.42 +/- 0.12 mm of water per hour. Estimated cloud water deposition of Hg was 7.4 microg m(-2) for the period August 1-October 31, approximately twice that deposited by rain during this period at a nearby low elevation Hg monitoring site. Our results indicate that cloud water and Hg deposition at Mt. Mansfield are likely to have considerable ecological effects.     

Genotoxicity of the sediments collected from Pearl River in China and their polycyclic aromatic hydrocarbons (PAHs) and heavy metals

The accelerated industrialization and urbanization in the last three decades around the Pearl River Delta within Guangdong Province in China have led to serious concerns about the impacts on the aquatic environment. In the present study, the genotoxicity of the sediments collected from the Pearl River was evaluated by micronucleus (MN) assay with Vicia faba root tip cells, and the 16 EPA priority polycyclic aromatic hydrocarbons (PAHs) and heavy metals (HMs, including Cr, Cu, As, Se, Cd, Hg, and Pb) in the sediments were determined respectively by GC-MS, inductively coupled plasma mass spectrometry, and inductively coupled plasma atomic emission spectrometry. The results showed that there were significant increases of MN frequencies observed in the sediment-exposed groups, compared with the negative group (P?相似文献