State of rare earth elements in different environmental components in mining areas of China

China has relatively abundant rare earth elements (REEs) reserves and will continue to be one of the major producers of REEs for the world market in the foreseeable future. However, due to the large scale of mining and refining activities, large amounts of REEs have been released to the surrounding environment and caused harmful effects on local residents. This paper summarizes the data about the contents and translocation of REEs in soils, waters, atmosphere, and plants in REE mining areas of China and discusses the characteristics of their forms, distribution, fractionation, and influencing factors. Obviously high concentrations of REEs with active and bioavailable forms are observed in all environmental media. The mobility and bioavailability of REEs are enhanced. The distribution patterns of REEs in soils and water bodies are all in line with their parent rocks. Significant fractionation phenomenon among individual members of REEs was found in soil–plant systems. However, limited knowledge was available for REEs in atmosphere. More studies focusing on the behavior of REEs in ambient air of REE mining areas in China are highly suggested. In addition, systematic study on the translocation and circulation of REEs in various media in REEs mining areas and their health risk assessment should be carried out. Standard analytical methods of REEs in environments need to be established, and more specific guideline values of REEs in foods should also be developed.     

Accuracy and traceability in environmental monitoring--pitfalls in methylmercury determinations as a case study

The concepts of accuracy and traceability as applied to environmental analysis are still prone to misunderstandings. While accuracy refers to the closeness of analytical values to "true values" (trueness) and among various repetitions (precision), the term traceability implies a link of data obtained to established references through an unbroken chain of comparisons all with stated uncertainties. These misunderstandings, possibly occurring among the analytical community, may have consequences on environmental data interpretation. Recent discussions in the field of environmental speciation analysis illustrated that accuracy and traceability issues are still not firmly established within the environmental chemistry community. This paper discusses this issue, taking methylmercury as a case study.     

Cycling of rare earth elements in the atmosphere in central Tokyo

Concentrations of 14 rare earth elements (REEs) in six size classes of airborne particulate matter (APM) (<0.43, 0.43-0.65, 0.65-1.1, 1.1-2.1, 2.1-11, and >11 μm) and in two different phases (suspended particulate and dissolved) in rainwater were determined by inductively coupled plasma mass spectrometry (ICP-MS). Positive Eu and Tb anomalies were observed in size-classified APM. These anomalies may be due to large emissions of Eu and Tb to the atmosphere resulting from the recent change in Japan from the use of cathode-ray tubes to plasma displays in television sets (Eu and Tb) and from the widespread use of magneto-optical disks (Tb). The light REEs were enriched in fine APM particles (diameter < 1.1 μm). Because compositions of La/Ce/Sm in fine APM (diameter < 1.1 μm) were similar to those in automobile catalyst, the light REE enrichment was attributed to automobile emissions. In contrast, the REE distribution pattern in the suspended particulate phase in rainwater was similar to that in coarse APM (diameter > 2.1 μm), and a positive Tb anomaly was observed, suggesting that coarse particles easily become trapped in rain droplets. A negative Eu anomaly was observed in the dissolved phase in rainwater, but not in APM or in the suspended particulate phase in rainwater. Unlike other REEs, Eu can exist as both bivalent and trivalent ions in nature, and Eu-selective dissolution from or adsorption onto the trapped particles of Eu might account for the negative anomaly. These results show that atmospheric REE cycling is affected by the physico-chemical properties of APM.     

Collaborative evaluation of the analytical state-of-the-art of platinum, palladium and rhodium determinations in road dust

In order to control the quality of platinum, palladium and rhodium determinations in road dust, the Standards, Measurements and Testing Programme (formerly BCR) of the European Commission has started a project, the final aim of which is to certify a road dust reference material for its contents of platinum group elements. The first part of this project consisted of an interlaboratory study, which aimed to test the feasibility of the preparation of a candidate road dust reference material and to detect and remove most of the pitfalls observed in platinum, palladium and rhodium determinations. This paper presents the main results of this interlaboratory study carried out prior to the certification campaign. The concordance of the data obtained by the participating laboratories for the three elements was considered to reflect the state-of-the-art and was encouraging enough to decide on the organization of a certification campaign to be conducted during the year 2000. The progress made with respect to the analytical state-of-the-art for these elements will be of great benefit to the quality of measurements carried out in environmental monitoring in this particular field.     

An approach to the assessment of the quality of environmental monitoring data

This paper reports an approach to the assessment of the validity of environmental monitoring data--a 'data filter'. The strategy has been developed through the UK National Marine Analytical Quality Control (AQC) Scheme for application to data collected for the UK National Marine Monitoring Plan, although the principles described are applicable more widely. The proposed data filter is divided into three components: Part A, 'QA/QC'--an assessment of the laboratory's practices in Quality Assurance/Quality Control; Part B, 'fitness for purpose'--an evaluation of the standard of accuracy that can be demonstrated by activities in (A), in relation to the intended application of the data; and Part C, the overall assessment on which data will be accepted as usable or rejected as being of suspect quality. A pilot application of the proposed approach is reported. The approach described in this paper is intended to formalise the assessment of environmental monitoring data for fitness for a chosen purpose. The issues important to fitness for purpose are discussed and assigned a relative priority order on which to judge the reliability/usefulness of monitoring data.     

Biomonitoring of antimony in environmental matrices from terrestrial and limnic ecosystems

Elder and poplar leaves from various sampling sites were studied with respect to their antimony content. Moreover, a retrospective determination of Sb was performed in representative limnic and terrestrial samples of the Federal Environmental Specimen Bank of Germany which have been collected over 14 years. The analytical procedure is based on an open vessel acid digestion of freeze-dried biological samples and the subsequent quantification of Sb in the digests by flow injection hydride generation atomic absorption spectrometry. Strict quality control schemes were applied to the entire procedure to guarantee accurate and precise results. No long-term changes of the Sb concentrations were found in spruce shoots or poplar leaves from different sampling sites. However, spruce shoots from a semi-natural region showed concentrations of Sb (approximately 22 ng g-1; range: 17-29 ng g-1) that were approximately four times lower than in corresponding samples from an urban-industrialized area. The analysis of virgin and washed elder leaves revealed that approximately 20-30% of the Sb is present on the leaf surface. Sb levels in elder leaves ranged from 5.2 +/- 0.3 ng g-1 in samples from Argentina to 589 +/- 30 ng g-1 in leaves collected directly beside a motorway in Germany. Similarly, poplar leaves from Argentina and Chile showed about 4 ng Sb g-1, whereas 150 ng Sb g-1 was found in poplar leaves from Germany. The lowest concentrations of Sb were determined in digests of pigeon eggs (approximately 2 ng g-1), bream liver (approximately 4 ng g-1) and deer liver (approximately 6 ng g-1). A similar pattern of Sb concentrations in spruce shoots, leaves or liver samples from an industrialized area and an agrarian ecosystem in Germany was established. Concentrations of Sb in elder leaves were closely associated with car traffic, giving maximum concentrations of 589 ng g-1 directly beside a motorway, 207 ng g-1 50 m from the motorway and 153 ng g-1 in a close residential area.     

Fuzzy clustering analysis in environmental impact assessment — A complement tool to environmental quality index

In spite of rapid progress achieved in the methodological research underlying environmental impact assessment (EIA), the problem of weighting various parameters has not yet been solved. This paper presents a new approach, fuzzy clustering analysis, which is illustrated with an EIA case study on Baoshan-Wusong District in Shanghai, China. Fuzzy clustering analysis may be used whenever a composite classification of environmental quality/impact incorporates multiple parameters. In such cases the technique may be used as a complement or an alternative to comprehensive assessment. In fuzzy clustering analysis, the classification is determined by a fuzzy relation. After a fuzzy similarity matrix has been established and the fuzzy relation stabilized, a dynamic clustering chart can be developed. Given a suitable threshold, the appropriate classification can be accomplished. The methodology is relatively simple and the results can be interpreted to provide valuable information to support decision making and improve management of the environment.     

用活性污染指数法评价微污染水体的环境质量

针对水环境质量的均值污染指数评价方法的缺点,提出了利用活性污染指数法来评价微污染水体环境质量。随后在实例中对此方法进行了运用,并与均值污染指数法进行了比较,效果不错。     

Determination of trace transition metals in environmental matrices by chelation ion chromatography

Trace transition metals (Fe^3?+?, Mn, Cu, Cd, Co, Zn, Ni) in environmental samples were analyzed by chelation ion chromatography using a mixed bed ion-exchange column with pyridine-2,6-dicarboxylic acid (PDCA) and oxalic acid as eluent and large volume direct injection (1,000 ??l). The two eluents, PDCA and oxalic acid, were tested, and repeatability and detection limits were compared. The total analysis time was ~15 min. The separation with PDCA was more successful than that obtained with acid oxalic. It was observed that utilizing PDCA resulted in lower detection limits, higher repeatability, and a quantitative detection of Cd and Mn, which coelute as a single peak when using the oxalic acid. At last, the PDCA calibration graphs resulted linear (r ²?>?0.999) in the range 0.4?C1,000 ??g/L. The procedure was applied to the analysis of metals in soils and in water samples. The results obtained from the analysis of natural waters have demonstrated that the method is simple and efficient, therefore, can be used for the determination of metals in natural waters using a continuous and automatic monitoring system.     

Managed aquifer recharge by a check dam to improve the quality of fluoride-rich groundwater: a case study from southern India

In many regions around the globe, including India, degradation in the quality of groundwater is of great concern. The objective of this investigation is to determine the effect of recharge from a check dam on quality of groundwater in a region of Krishnagiri District of Tamil Nadu State, India. For this study, water samples from 15 wells were periodically obtained and analysed for major ions and fluoride concentrations. The amount of major ions present in groundwater was compared with the drinking water guideline values of the Bureau of Indian Standards. With respect to the sodium and fluoride concentrations, 38% of groundwater samples collected was not suitable for direct use as drinking water. Suitability of water for agricultural use was determined considering the electrical conductivity, sodium adsorption ratio, sodium percentage, permeability index, Wilcox and United States Salinity Laboratory diagrams. The influence of freshwater recharge from the dam is evident as the groundwater in wells nearer to the check dam was suitable for both irrigation and domestic purposes. However, the groundwater away from the dam had a high ionic composition. This study demonstrated that in other fluoride-affected areas, the concentration can be reduced by dilution with the construction of check dams as a measure of managed aquifer recharge.     

Fraction characteristics of rare earth elements in the surface sediment of Bohai Bay, North China

Surface sediment samples were collected at 27 stations of Bohai Bay, North China. Sequential extractions were carried out in this study. REE were leached out from four labile fractions: Exchangeable (L1), bound to carbonates (L2), bound to Fe–Mn oxides (L3), bound to organic matter (L4), and the remainder was residual (R5). The total contents of REE fluctuate slightly in Bohai Bay, and are mainly concentrated in the middle region, showing relatively higher levels in the north than that in the south of Bohai Bay. Percentages of L1, L2, L3, L4, and R5 for REE suggest that the residual fraction accounts for the major component of REE, whereas Fe–Mn oxides also play important roles in combining labile REE. As the REE complex is not stabilized, the competition of complex could induce dissociation of the complex and redistribution of the REE in various environments. According to REE patterns and Y/Ho ratios of samples, REE are not anthropogenic or oceanic sources but riverine input, whereas suitable environment varieties can slightly affect the patterns and fractionations of REE. As powerful tracers for the variable of environment, higher anomaly of Eu and Ce in southern regions indicates a greater reduction in the condition of surface sediment in the south than that in the north of Bohai Bay.     

How to improve reliability in groundwater analysis: over a decade of experience with external quality control in field campaigns on volatile halogenated compounds

The reliability in measurement results obtained during environmental monitoring is crucial for the assessment and further planning of remediation efforts on the respective contaminated sites by the responsible authorities. A case study concerned with groundwater contaminated with perchloroethylene, trichloroethylene and 1,1,2-trichlorotrifluoroethane including their degradation products which involves private contract laboratories and an independent provider of quality assurance (QA) is presented. The experience gained with biannual monitoring campaigns over 14 years indicates that the selection of contractors on basis of accreditation status and successful performance in interlaboratory comparisons are not sufficient. Rather the auditing of the contractors by the QA provider prior to each campaign and the crosschecking of selected monitoring samples by the QA provider led to a lasting improvement of reliability in the contractors' measurement results. A mean deviation of 20% from the reference value determined by the QA provider for the crosschecked samples was reached.     

Scaling methods in assessing environmental quality: A methodological approach to eutrophication

The identification of pollution levels by numerical classification-ordination and the statistical confirmation of the detected trends-were attempted in a eutrophication assessment study. Special emphasis was placed on the importance of data scaling and the selection of a distance coefficient that would accentuate discrete states within the system. Among metric, binary and ordinal variable scaling, ordinal numbers showed the maximum sensitivity in discriminating pollution levels; the observed trends were further enhanced by using the absolute distance coefficient as a resemblance measure. The eutrophic patterns identified were statistically confirmed by a non-parametric permutation test. Finally a step-by-step multivariate procedure is proposed for assessing environmental quality in aquatic ecosystems.     

Two thousand years of atmospheric rare earth element (REE) deposition as revealed by an ombrotrophic peat bog profile,Jura Mountains,Switzerland

A peat core from a Swiss bog represents 2110 14C years of peat accumulation and provides a continuous record of atmospheric rare earth element (REE) deposition. This is the first study providing a time-series of all REE originating from the atmosphere. Concentrations of the 14 REE (La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb and Lu) were determined using inductively coupled plasma-mass spectrometry (ICP-MS) after dissolution of 200 mg aliquots of age-dated peat samples with 3 ml HNO3 and 0.1 ml HBF4 at 240 degrees C in a microwave autoclave. Strict quality control schemes were applied to ensure the accuracy of the applied analytical methodology. Previous analyses of selected REE by instrumental neutron activation analysis (INAA) in the same set of peat samples revealed that INAA frequently under- or overestimated REE concentrations in a systematic manner. Concentration profiles obtained for all REE were almost identical, except for Ce and Eu. Calculation of enrichment factors (EF) revealed a distinct depletion of heavy REE relative to light REE in peat samples since the beginning of the 19th century which marks the onset of the Industrial Revolution in Europe, suggesting a pronounced influence by anthropogenic activities. Enrichments of REE calculated using Sc as a reference element exceeded unity, relative to the Upper Continental Crust. Overall, EF in all peat samples ranged from 1.96 for Sm to 2.34 for Gd, with considerably lower EF for Ce (1.82) and Eu (1.44), respectively. A significant enrichment of all REE which may have been caused by military activities, was observed in the peat sample dating from World War II (1944); this exceptional sample, however, is not enriched in Ce. The concentration profiles of REE were similar but not identical to those of other lithogenic, conservative reference elements such as Sc, Y, Al, Zr and Ti. While it has been suggested that individual REE concentrations or the sum of REE can be used as a reference parameter to calculate crustal EF in environmental samples the data presented here indicates that anthropogenic emissions of REE cannot simply be ignored.     

An implementation plan for using biological indicators to improve assessment of water quality in Thailand

The present study showed a possibility to use phenotypic and proteomic responses in rice plants as an in vivo biomarker to detect higher concentrations of ambient ozone (O₃). The investigation was done on two cultivars of Indian rice using open top chambers ventilated with charcoal filtered air, ambient air, ambient air with 10 ppb O₃ exposure and ambient air with 20 ppb O₃ exposure at a rural site of Varanasi, India. Results showed that the magnitude of O₃ induced specific type of foliar injury directly depends on the duration and concentration of O₃ exposure. Even the internal protein profile of injured and normal leaf demonstrated a differential expression, which directly indicates towards the molecular basis of plant’s response against O₃.     

Many roads may lead to Rome: Selected features of quality control within environmental assessment systems in the US,NL, CA,and UK

As there is no one-and-only concept on how to precisely define and establish quality control (QC) or quality assurance (QA) in the making of environmental assessments (EA), this paper presents selected features of international approaches that address quality in EA systems in the USA, the Netherlands, Canada, and the United Kingdom. Based on explanative case studies, we highlight the embedding of specific quality control features within the EA systems, the objectives and processes, and relevant transparency challenges. Such features of QC/QA approaches can be considered in cases where substantial quality control and assurance efforts are still missing. Yet further research needs to be conducted on the efficacy of these approaches, which remains beyond the scope of this study.     

Progressing quality control in environmental impact assessment beyond legislative compliance: An evaluation of the IEMA EIA Quality Mark certification scheme

The effectiveness of Environmental Impact Assessment (EIA) systems is contingent on a number of control mechanisms: procedural; judicial; evaluative; public and government agency; professional; and development aid agency. If we assume that procedural and judicial controls are guaranteed in developed EIA systems, then progressing effectiveness towards an acceptable level depends on improving the performance of other control mechanisms over time. These other control mechanisms are either absent, or are typically centrally controlled, requiring public finances; this we argue is an unpopular model in times of greater Government austerity. Here we evaluate a market-based mechanism for improving the performance of evaluative and professional control mechanisms, the UK Institute of Environmental Management and Assessments' EIA Quality Mark. We do this by defining dimensions of effectiveness for the purposes of our evaluation, and by identifying international examples of the approaches taken to delivering the other control measures to validate the approach taken in the EIA Quality Mark. We then evaluate the EIA Quality Mark, when used in combination with legal procedures and an active judiciary, against the effectiveness dimensions and use time-series analysis of registrant data to examine its ability to progress practice. We conclude that the EIA Quality Mark has merit as a model for a market-based mechanism, and may prove a more financially palatable approach for delivering effective EIA in mature systems in countries that lack centralised agency oversight. It may, therefore, be of particular interest to some Member States of the European Union for ensuring forthcoming certification requirements stemming from recent amendments to the EIA Directive.     

强化空气质量管理改善城市空气质量

大连市在加强环境立法执法、老污染治理、新建项目管理的同时,通过进行区域总量控制、调整产业结构和工业布局以及对城市环境的综合整治等多种方法和手段,使城市环境空气质量明显改善.     

Application of a checklist for quality assistance in environmental modelling to an energy model

Large, complex energy models present considerable challenges to develop and test. Uncertainty assessments of such models provide only partial guidance on the quality of the results. We have developed a model quality assistance checklist to aid in this purpose. The model checklist provides diagnostic output in the form of a set of pitfalls for the model application. The checklist is applied here to an energy model for the problem of assessing energy use and greenhouse gas emissions. Use of the checklist suggests that results on this issue are contingent on a number of assumptions that are highly value-laden. When these assumptions are held fixed, the model is deemed capable of producing moderately robust results of relevance to climate policy over the longer term. Checklist responses also indicate that a number of details critical to policy choices or outcomes on this issue are not captured in the model, and model results should therefore be supplemented with alternative analyses.