Planning for integrated solid waste management at the industrial park level: a case of Tianjin, China

Industrial parks play a significant role in the production and use of goods and services. The proper management of solid waste is a major challenge for industrial parks due to the large quantity of wastes and the variability of waste characteristics from these types of developments. Therefore, integrated solid waste management has become very crucial to the industrial park managers. Such an approach requires industrial park managers to assess the overall use of resources, and to seek waste reduction, reuse and recycling opportunities both at the individual company level and among different tenant companies. The adoption of this method can bring both economic and environmental benefits. This paper introduces the planning efforts of a real case in China. It first presents the basic information on Tianjin Economic Development Area (TEDA), and then introduces its current practices on solid waste management. The main focus of this paper is to describe how to plan an integrated solid waste management system at TEDA. Benefits and challenges are all identified and analyzed. The experiences and methods from this case study should be applied in other industrial parks so as to improve the overall eco-efficiency of the whole industrial park.     

Report: future industrial solid waste management in pars Special Economic Energy Zone (PSEEZ), Iran.

The Pars Special Economic Energy Zone (PSEEZ) is located in the south of Iran, on the northern coastline of the Persian Gulf. This area was established in 1998 for the utilization of south Pars field oil and gas resources. This field is one of the largest gas resources in the world and contains about 6% of the total fossil fuels known. Petrochemical industries, gas refineries and downstream industries are being constructed in this area. At present there are three gas refineries in operation and five more gas refineries are under construction. In this study, different types of solid waste including municipal solid waste (MSW) and industrial wastes were investigated separately. The aim of the study was to focus on the management of the industrial wastes in order to minimize the environmental impact. In the first stage, the types and amounts of industrial waste in PSEEZ were evaluated by an inventory. The main types of industrial waste are oil products (fuel oil, light oil, lubricating oil), spent catalysts, adsorbents, resins, coke, wax and packaging materials. The waste management of PSEEZ is quite complex because of the different types of industry and the diversity of industrial residues. In some cases recycling/reuse of waste is the best option, but treatment and disposal are also necessary tools. Recently a design has been prepared for a disposal site in PSEEZ for the industrial waste that cannot be reused or recycled. The total surface area of this disposal site where the industrial waste should be tipped for the next 20 years was estimated to be about 42 000 m2.     

Characteristics and management of infectious industrial waste in Taiwan

Infectious industrial waste management in Taiwan is based on the specific waste production unit. In other countries, management is based simply on whether the producer may lead to infectious disease. Thus, Taiwan has a more detailed classification of infectious waste. The advantage of this classification is that it is easy to identify the sources, while the disadvantage lies in the fact that it is not flexible and hence increases cost. This study presents an overview of current management practices for handling infectious industrial waste in Taiwan, and addresses the current waste disposal methods. The number of small clinics in Taiwan increased from 18,183 to 18,877 between 2003 and 2005. Analysis of the data between 2003 and 2005 showed that the majority of medical waste was general industrial waste, which accounted for 76.9%-79.4% of total medical waste. Infectious industrial waste accounted for 19.3%-21.9% of total medical waste. After the SARS event in Taiwan, the amount of infectious waste reached 19,350 tons in 2004, an increase over the previous year of 4000 tons. Waste minimization was a common consideration for all types of waste treatment. In this study, we summarize the percentage of plastic waste in flammable infectious industrial waste generated by medical units, which, in Taiwan was about 30%. The EPA and Taiwan Department of Health have actively promoted different recycling and waste reduction measures. However, the wide adoption of disposable materials made recycling and waste reduction difficult for some hospitals. It has been suggested that enhancing the education of and promoting communication between medical units and recycling industries must be implemented to prevent recyclable waste from entering the incinerator.     

A model for quantifying construction waste in projects according to the European waste list

The new EU challenge is to recover 70% by weight of C&D waste in 2020. Literature reveals that one major barrier is the lack of data. Therefore, this paper presents a model which allows technicians to estimate C&D waste during the design stage in order to promote prevention and recovery. The types and quantities of CW are estimated and managed according to EU guidelines, by building elements and specifically for each project. The model would allow detection of the source of the waste and to adopt other alternative procedures which delete hazardous waste and reduce CW. Likewise, it develops a systematic structure of the construction process, a waste classification system and some analytical expressions which are based on factors. These factors depend on technology and represent a standard on site. It would allow to develop a database of waste anywhere. A Spanish case study is covered. Factors were obtained by studying over 20 dwellings. The source and types of packaging waste, remains, soil and hazardous waste were estimated in detail and were compared with other studies. Results reveal that the model can be implemented in projects and the chances of reducing and recovery C&D waste could be increased, well above the EU challenge.     

Solid industrial wastes and their management in Asegra (Granada, Spain)

ASEGRA is an industrial area in Granada (Spain) with important waste management problems. In order to properly manage and control waste production in industry, one must know the quantity, type, and composition of industrial wastes, as well as the management practices of the companies involved. In our study, questionnaires were used to collect data regarding methods of waste management used in 170 of the 230 businesses in the area of study. The majority of these companies in ASEGRA are small or medium-size, and belong to the service sector, transport, and distribution. This was naturally a conditioning factor in both the type and management of the wastes generated. It was observed that paper and cardboard, plastic, wood, and metals were the most common types of waste, mainly generated from packaging (49% of the total volume), as well as material used in containers and for wrapping products. Serious problems were observed in the management of these wastes. In most cases they were disposed of by dumping, and very rarely did businesses resort to reuse, recycling or valorization. Smaller companies encountered greater difficulties when it came to effective waste management. The most frequent solution for the disposal of wastes in the area was dumping.     

Searching quality data for municipal solid waste planning

Effective waste reduction and recycling is predicated upon credible data on refuse generation and disposal. Despite improvements in the quality of data for municipal solid wastes (MSW) disposal, dependable generation and recycling statistics to support planning, regulation and administration are lacking. The available aggregates on national waste production from two sources do not conform to each other and fail to serve the requirements of local solid waste planning. As recycling estimates will be difficult to discern, the collection of generation data based on weighing waste samples at generator sites has been portrayed as the key for developing sustainable local databases. The coefficients developed from the databases for the various categories of residential, commercial, industrial and institutional wastes can be used as variables for waste generation models.     

Using plastic bag waste to assess the reliability of self-reported waste disposal data

Direct waste analysis (DWA) and the material flows approach are the two standard methods to quantify aggregated waste streams and analyze waste composition. Yet, with the increasing application of producer responsibility measures, product-based waste data rather than aggregated waste data are becoming important. It is over this requirement that both approaches fail to some extent in delivering the type and quality of information that is needed. This study uses plastic bag waste as an illustration to show how self-reported questionnaire survey data may be used to assess disposal quantities of product-based waste types. The estimates from a large-scale questionnaire survey with over 4,100 completed cases were verified against DWA data of the same year in Hong Kong. It was found that self-reported data give systematically lower figures (on the order of 1.3-5 times) than those obtained from standard methods such as DWA for Hong Kong and the UK. However, it is demonstrated that self-reported data can be internally consistent. Also, the magnitude of underestimation may not be as considerable as it appears since the data from DWA are not themselves entirely accurate owing to the difficulties in obtaining a pure load of waste for field analysis and the variable moisture contents or contamination levels in waste material.     

Sources and factors controlling the disposal of biodegradable municipal solid waste in urban and rural areas of Cyprus

An inventory of sources of biodegradable municipal soil waste (BMSW) was constructed for urban and rural areas in the EU accession region of Cyprus. Composition analysis was performed on source-separated BMSW collected from households in the rural Ergates Community and an urban area within the Agglanjia Municipality. The data were statistically scrutinized to identify the main factors influencing the quantities of BMSW disposed by urban and rural communities in Cyprus. The results were extrapolated to predict the quantities and types of BMSW disposed by the entire communities. Significantly more BMSW was disposed in the urban area compared to the rural community due to lower diversion rates for green waste and the disposal of food waste from commercial sources. The quantity of food waste collected from households was influenced by socio-economic (household size, income, percentage of children) and behavioural (feeding of food waste to domestic animals, consuming processed 'ready' food) factors, whereas garden size, the type of vegetation, the reuse of trimmings and home composting were the main factors controlling the disposal of green waste.     

Characteristics of healthcare wastes

A comprehensive understanding of the quantities and characteristics of the material that needs to be managed is one of the most basic steps in the development of a plan for solid waste management. In this case, the material under consideration is the solid waste generated in healthcare facilities, also known as healthcare waste. Unfortunately, limited reliable information is available in the open literature on the quantities and characteristics of the various types of wastes that are generated in healthcare facilities. Thus, sound management of these wastes, particularly in developing countries, often is problematic. This article provides information on the quantities and properties of healthcare wastes in various types of facilities located in developing countries, as well as in some industrialized countries. Most of the information has been obtained from the open literature, although some information has been collected by the authors and from reports available to the authors. Only data collected within approximately the last 15 years and using prescribed methodologies are presented. The range of hospital waste generation (both infectious and mixed solid waste fractions) varies from 0.016 to 3.23kg/bed-day. The relatively wide variation is due to the fact that some of the facilities surveyed in Ulaanbaatar include out-patient services and district health clinics; these facilities essentially provide very basic services and thus the quantities of waste generated are relatively small. On the other hand, the reported amount of infectious (clinical, yellow bag) waste varied from 0.01 to 0.65kg/bed-day. The characteristics of the components of healthcare wastes, such as the bulk density and the calorific value, have substantial variability. This literature review and the associated attempt at a comparative analysis point to the need for worldwide consensus on the terms and characteristics that describe wastes from healthcare facilities. Such a consensus would greatly facilitate comparative analyses among different facilities, studies and countries.     

Utilization of post-production waste from fruit processing for energetic purposes: analysis of Polish potential and case study

There is no doubt that waste products from fruit and vegetable processing are difficult to manage. In that context, partial substitution of conventional energy substrates by industrial waste is an alternative, as it helps to utilize residues and at the same time to reduce the fixed cost of running business. The aim of the article is to analyse the possibilities of using fruit processing wastes for energy purposes in Poland. The assessment on a country scale was based on the data of the Central Statistical Office. Analogical analysis was based on the data collected from selected production plant. The obtained results show that the fruit processing waste can be successfully utilized for energy purposes. At the same time, problems of organizational nature should not be overlooked, as they can significantly decrease that potential. Although the amount of energy obtained from this source is basically negligible in the Polish energy balance, the environmental factor should not be ignored also. Therefore, the utilization of waste products from fruit processing should be a topic of interest, as it works in two ways, i.e., through reducing the amount of waste and increasing production of renewable energy.

     

Prediction of unconfined compressive strength of cement paste containing industrial wastes

Neural network analysis was used to construct models of unconfined compressive strength (UCS) as a function of mix composition using existing data from literature studies of Portland cement containing real industrial wastes. The models were able to represent the known non-linear dependency of UCS on curing time and water content, and generalised from the literature data to find relationships between UCS and quantities of five waste types. Substantial decreases in UCS were caused by all wastes; except for EAF dust, the effect was nonlinear with the greatest decrease caused initially by approx. 12% plating sludge, 40% foundry dust, 58% other ash, and 72% MSWI fly ash by mass of dry product. It appears that the maximum waste additions used in modelling may approximate the practical limits of waste additions used in modelling may approximate the practical limits of waste addition to Portland cement, i.e., 50% plating sludge or EAF dust, 64% foundry dust, 92% other ash, and 85% MSWI fly ash by mass of dry product. The laboratory was found to be a key predictive variable and acted as a surrogate for laboratory-specific variables related to cement composition, strength and hardening class, product mixing and preparation details, laboratory conditions, and testing details. While the neural network modelling approach has been shown to be feasible, development of better models would require larger data sets with more complete information regarding laboratory-specific variables and waste composition.     

A planning-level model for estimating quantities of wastes generated by the demolition of structures during remediation

A model is presented to estimate quantities of wastes generated by the demolition of various types of industrial structures. It is intended to be used for preliminary planning purposes in the absence of any detailed structure-specific information. Detailed material quantity estimates compiled for structures at the U.S. Department of Energy's Fernald site in Ohio were used to develop the statistical relationships in the model. The model provides estimates of the total quantity of wastes, the quantities of waste concrete, and the quantities of wastes that originate from at-, below-, and above-grade portions of a structure.     

Options for sustainable industrial waste management toward zero landfill waste in a high-density polyethylene (HDPE) factory in Thailand

The feasibility of the 3R concept tends to increase the reduction, reuse, and recycling of industrial waste. In this study, we investigated the feasibility of 3R methods to cope with industrial waste generated from high-density polyethylene production in Thailand. The sources and types of waste and existing waste management practices were identified. The four sources of waste generation that we identified were: (1) production, (2) packaging, (3) wastewater treatment, and (4) maintenance, distributed as 47, 46, 4, and 3 %, respectively. The main options for management were: sales to recycling plants (60.41 %), reuse and recycling (25.93 %), and industrial-waste landfilling (10.47 %). After 3R options were introduced, the proposed alternatives were found to be capable of reducing the amount of waste by 33.88 %. The results of life-cycle assessment (LCA) were useful for considering the environmental impact where 3R options were adopted. We also found that net greenhouse gas (GHG) emissions and other environmental impacts could be reduced when industrial waste diverted from landfill is used as alternative fuel. However, the cost of waste disposal seems to be the greatest obstacle for the adoption of 3R methods in Thailand.     

Discussion on the methodology for determining food waste in household waste composition studies

Food waste has become an increasingly discussed topic in recent years. However, there is little authoritative data on food waste quantities and composition and systematic and comparable data are missing. Household waste composition analyses, which are often carried out routinely at regular or irregular intervals, provide an opportunity for obtaining data about food waste at both local and regional levels. The results of prior waste composition studies are not really comparable due to the different classifications, definitions and methods used; in addition, these are mostly insufficiently described and not reproducible by a third party. The aim of this paper is to discuss a methodology for determining the proportion of food waste in household waste composition studies, by analysing specific problems and possible solutions. For that purpose, findings from the literature are analysed and the approach and results of a composition analysis of residual waste of a stratified sample (urban, rural area) are presented. The study suggests that in order to avoid a significant loss of information, waste should not be sieved before sorting and packed food waste should be classified into the relevant food waste category together with its packaging. The case study showed that the overall influence of the proportion of food packaging included in the food waste category, which amounted to only 8%, did not significantly influence the results and can therefore be disregarded.     

A Forecast Model Of Refuse Tonnage With Recapture And Uncertainty Bounds

A spreadsheet model for forecasting solid waste tonnages is described. The model uses generation coefficients from the technical literature associated with individual material components (paper, glass, metals, plastics and rubber, organic materials, construction waste, inerts and other) to express the amount of waste produced per capita and per employee in the labor force. Estimates of quantities being generated by two major groups, namely domestic and industrial/commercial/institutional sources are reflected in the model's output. Using this disaggregated format, the model estimates total waste, recaptured waste (as a result of policy initiatives), and net refuse. Confidence intervals are developed using a regression model related to the business cycle. Two worked examples are given for data obtained in Canada.     

Potentials for the prevention of municipal solid waste

Waste prevention has been assigned the highest priority under European waste management law. However, the initiatives which have been taken so far have not reduced the regular annual increase in total waste arising across Europe. The purpose of this paper is to quantify and analyze in depth the prevention potential for selected case studies (advertising material, beverage packaging, diapers, food waste, waste from events). Only such measures are considered, which do not require a reduction of consumption. The prevention potentials for household waste in theory are exemplified for the city of Vienna, also with a view to barriers that may reduce the achievable prevention potential. The results show that the prevention potentials for the analyzed individual measures can reach an order of magnitude of some 10% of the relevant waste stream (e.g., advertising material, beverage packaging), or rather 1-3% of municipal solid waste. The prevention potentials appear to be relatively small in relation to the total municipal waste quantities. Methodological shortcomings, such as the missing availability of basic data, make it difficult to exactly estimate the impact of waste prevention measures on waste quantities, which is only one of the effects of waste prevention among other ecological, social and economic aspects.     

The predictive accuracy of published solid waste generation factors

The accuracy of predictions of quantities of solid waste based upon waste generation factors reported in the literature was tested. Estimates of residential, industrial, and commercial solid waste quantities were computed for Brown County. Wisconsin U.S.A. and compared to actual waste quantities received. Predictions were within 20% for residential wastes and for some predictions of commercial wastes but far from the mark for industrial and construction-demolition wastes.     

Environmental impact of incineration of calorific industrial waste: Rotary kiln vs. cement kiln

Rotary kiln incinerators and cement kilns are two energy intensive processes, requiring high temperatures that can be obtained by the combustion of fossil fuel. In both processes, fossil fuel is often substituted by high or medium calorific waste to avoid resource depletion and to save costs. Two types of industrial calorific waste streams are considered: automotive shredder residue (ASR) and meat and bone meal (MBM). These waste streams are of current high interest: ASR must be diverted from landfill, while MBM can no longer be used for cattle feeding. The environmental impact of the incineration of these waste streams is assessed and compared for both a rotary kiln and a cement kiln. For this purpose, data from an extensive emission inventory is applied for assessing the environmental impact using two different modeling approaches: one focusing on the impact of the relevant flows to and from the process and its subsystems, the other describing the change of environmental impact in response to these physical flows. Both ways of assessing emphasize different aspects of the considered processes. Attention is paid to assumptions in the methodology that can influence the outcome and conclusions of the assessment. It is concluded that for the incineration of calorific wastes, rotary kilns are generally preferred. Nevertheless, cement kilns show opportunities in improving their environmental impact when substituting their currently used fuels by more clean calorific waste streams, if this improvement is not at the expense of the actual environmental impact.     

从胶片生产废料中回收银

介绍了从涂布废水,废胶片、废乳剂中回收银的工艺流程,叙述了工业试验出现的问题和采取的措施。工业试验结果表明,对从上述３种废料中得到的湿银泥,采用培烧－置换－铸锭工艺回收银,回收率大于９９％,产品银锭的纯度大于９９．９％。     

Raw material potential of recyclable materials for fiber composites: a review study

The aim of this study is to investigate waste streams as a source of recyclable raw material for fiber composite production. Globally, vast volumes of waste are produced daily that are not recycled effectively. In this work, three different raw material sources are examined; industrial, construction and municipal solid waste streams. All three sources produce wastes that are currently underutilized. Usage areas for the waste material include use as a reinforcing fiber, as part of the plastic matrix or as a filler. The industrial sector produces more homogenous waste, while waste from municipalities is mixed. Irregular material flow, the varying condition of the waste and different pretreatments used pose difficulties for recycling. Furthermore, some materials are industry-specific and may be produced in only certain areas. Despite these difficulties, huge amount of potentially useful exploitable waste is available and using different waste streams as a part of wood-plastic composite production can reduce waste volumes disposed to landfill.