Analysis of airborne pollen fall in Nicosia (Cyprus)

Airborne pollen distribution in the city of Nicosia (Cyprus) was measured volumetrically during two consecutive years 2007–2008 on weekly basis using Lanzoni trap (Lanzoni VPPS 2000). A total of 7,880 pollen grains/m³ belonging to 44 taxa, in 2007 were 3,593 pollen grains/m³ and in 2008 it was 4,287 pollen grains/m³, were determined. Out of these, 25 belonged to the arboreal and 19 to the non-arboreal taxa. At the end of 2 years, total pollen counts were 78.76% arboreal, 19.32% non-arboreal, and 1.92% unidentified taxa. The number of pollen in the arboreal plants followed the trend as Pinaceae (29.96%), Cupressaceae/Taxaceae (18.33%), Olea europaea L. (6.92%), and Quercus spp. (4.92%), and for non-arboreal representatives, these were Poaceae (8.46%), Chenopodiaceae/Amaranthaceae (2.61%), Plantago spp. (1.69%), and Parietaria spp. (1.51%). The distribution of pollen in the atmosphere of Nicosia followed the trend as March, April, May, and June.     

Airborne pollen of allergenic herb species in Toledo (Spain)

This study analysed airborne pollen counts for allergenic herb taxa in Toledo (central Spain), a major tourist city receiving over 2 million visitors per year, located in the region of Castilla-La Mancha. The taxa selected were Chenopodiaceae–Amaranthaceae, Plantago, Poaceae and Urticaceae, all of which produce allergenic pollen giving rise to serious symptoms in pollen-allergy sufferers. Aerobiological data were recorded over a 6-year period (2005 to 2010) using the sampling and analysis procedures recommended by the Spanish Aerobiology Network. The abundance and the temporal (annual, daily and intradiurnal) distribution of these pollen types were analysed, and the influence of weather-related factors on airborne pollen counts was assessed. Pollen from herbaceous species accounted for 20.9% of total airborne pollen in Toledo, the largest contributor being Poaceae, with 8.5% of the total pollen count; this family was also the leading cause of respiratory allergies. Examination of intradiurnal variation revealed three distinct distribution patterns: (1) peak daily counts for Chenopodiaceae–Amaranthaceae and Plantago were recorded during the hottest part of the day, i.e. from 1400 to 1600 hours; (2) Urticaceae displayed two peaks (1400–1600 and 2200 hours); and (3) Poaceae counts remained fairly stable throughout the day. Two main risk periods were identified for allergies: spring, with allergies caused by Urticaceae, Plantago and Poaceae pollen, and summer, due to Chenopodiaceae–Amaranthaceae pollen.     

Platanus pollen season in Andalusia (southern Spain): trends and modeling

Platanus is a major cause of pollen allergy in many Spanish cities. The present paper reports an analysis of Platanus pollen season throughout the Andalusia region (southern Spain), which has among the highest pollen counts and the highest incidence of Platanus-related allergies in Europe. The main aim was to analyze pollen season trends from 1992 to 2010 in Andalusia; models were also constructed to forecast the start of the season. Daily pollen counts were recorded using Hirst-type volumetric spore-traps. Pollen season start-dates were very similar at all sites, usually occurring in March. The pollen season was delayed over the study period. The Pollen-season duration and Pollen index generally increased throughout the study period. The starting date for temperature accumulation was around the 10th February, although the threshold temperatures varied by site. The regional model for Andalusia failed to provide sufficiently accurate results compared with sub-regional or local models. For modeling purposes, three sub-regions are recommended: Inland, East Coast and West Coast.     

Apportionment of the airborne PM10 in Spain. Episodes of potential negative impact for human health

The particulate matter with an aerodynamic diameter less than or equal to 10 and 2.5 microns respectively (PM10 and PM2.5) constitutes one of the main air pollutants, which is currently regulated in Europe through Directive 2008/50/EC due to its proven harmful effects on human health. In this paper, the airborne PM10 samples collected in Zaragoza city during 2001-2009 were apportioned by statistical tools based on principal component analysis with absolute principal component scores (PCA-APCS). PM10 samples were characterized regarding their concentrations of polycyclic aromatic hydrocarbons (PAH) and water-soluble ions. PAH were analyzed by gas chromatography-mass spectrometry-mass spectrometry detection (GC-MS-MS) and ions were analyzed by ion chromatography. A total of five factors were identified by PCA-APCS corresponding to different anthropogenic and natural sources. This work was focused on analyzing in more detail those samples involving higher negative impact on human health, in particular, PM10 samples exceeding the daily PM10 limit value of 50 μg m(-3) according to Directive 2008/50/EC and samples with concentrations of benzo[a]pyrene (BaP) higher than the upper assessment threshold (BaP > 0.6 ng m(-3)) established by the Directive 2004/107/EC. Most of the exceedances of the daily PM10 limit value were associated with direct and indirect North-African long-range transport. During these exceedances, it was observed that anthropogenic pollution sources slightly decreased with regard to the natural sources. This indicated that episodes of high PM10 could have a natural origin associated with long-range transport from the African continent. On the contrary, those exceedances with regional contribution and samples with BaP concentrations higher than 0.6 ng m(-3) showed an important contribution of anthropogenic pollution sources increasing their negative impact on human health.     

Airborne pollen of ornamental tree species in the NW of Spain

This study analyzed airborne pollen counts for the tree taxa most widely used for ornamental purposes in the northwestern Iberian Peninsula (Platanus, Cupressaceae, Olea, Myrtaceae, Cedrus, and Casuarina) at four sites (Vigo, Ourense, Santiago, and Lugo), using aerobiological data recorded over a long period (1993?C2007). The abundance and the temporal and spatial distribution of these pollen types were analyzed, and the influence of weather-related factors on airborne pollen counts was assessed. Platanus (in Ourense) and Olea (in Vigo) were the taxa contributing most to pollen counts. In general terms, the results may be taken as indicators of potential risk for pollen-allergy sufferers and therefore used in planning future green areas.     

The statistical investigation on airborne fungi and pollen grains of atmosphere in Izmir-Turkey

This study aims to investigate the differences in the concentrations of airborne fungi and pollens between the towns located in the province of Izmir and to determine the factors contributing to these differences. Five stations in each of four towns (Buca, Konak, Bornova, and Karsiyaka) were randomly selected as the research areas. Fungus (cfu/m³) and pollen counts (cm²/pollen count) in the air samples collected from each station between June 2003 and May 2004 were measured. The results revealed that whereas Karsiyaka had the highest fungus concentration (521.33 ± 777.1), Buca and Bornova had the lowest concentration (482.67 ± 308.44). The mean fungus concentration in the province of İzmir was 501.5 ± 486.7. Pollen concentration was the highest in Konak (486.67 ± 839.06) and the lowest in Bornova (369.83 ± 551.13). Fungus and pollen concentrations revealed no difference between the towns (p > 0.05). The relationship between pollen-fungus concentrations and temperature-dust-humidity-sulphurdioxide was investigated but it was found statistically insignificant (p > 0.05). As a result of regression analysis, it was determined that correlation of atmospheric parameters had no effects on pollen and fungus concentrations (p > 0.05).     

Monitoring of pharmaceutically active compounds on the Guadalquivir River basin (Spain): occurrence and risk assessment

Guadalquivir River (South of Spain) is among the major freshwater sources of the European Atlantic basin. Until now scientific efforts have been focused on contamination by heavy metals and some priority pollutants in Guadalquivir River. However, the presence of "emerging contaminants", such as pharmaceutically active compounds, has not yet been studied. In this work the occurrence and risk assessment of sixteen pharmaceutically active compounds, belonging to different therapeutic groups, in Guadalquivir River during its course through Seville city are reported. Wastewater effluents from four wastewater treatment plants discharging into Guadalquivir River and river water samples were analyzed. All studied pharmaceutically active compounds, except sulfamethoxazole, trimethoprim, estrone and clofibric acid, were detected in effluent wastewaters at concentration levels up to 28.9 μg L(-1). Among the pharmaceutically active compounds found in effluent wastewater, seven were present in Guadalquivir River samples at concentration levels up to 0.75 μg L(-1), which indicated an important dilution from effluent discharge. Environmental risk assessment reveals that potential ecotoxicological risk cannot be expected on Guadalquivir River at measured concentration levels. Only, the lipid regulator gemfibrozil showed a medium risk for the environment. The risk for acute toxic effects in the environment with the current use of active pharmaceutical ingredients is unlikely. However, the results do not rule out the potential for chronic environmental effects.     

Heavy metal concentrations in particle size fractions from street dust of Murcia (Spain) as the basis for risk assessment

Street dust has been sampled from six different types of land use of the city of Murcia (Spain). The samples were fractionated into eleven particle size fractions (<2, 2-10, 10-20, 20-50, 50-75, 75-106, 106-150, 150-180, 180-425, 425-850 μm and 850-2000 μm) and analyzed for Pb, Cu, Zn and Cd. The concentrations of these four potentially toxic metals were assessed, as well as the effect of particle size on their distribution. A severe enrichment of all metals was observed for all land-uses (industrial, suburban, urban and highways), with the concentration of all metals affected by the type of land-use. Coarse and fine particles in all cases showed concentrations of metals higher than those found in undisturbed areas. However, the results indicated a preferential partitioning of metals in fine particle size fractions in all cases, following a logarithmic distribution. The accumulation in the fine fractions was higher when the metals had an anthropogenic origin. The strong overrepresentation of metals in particles <10 μm indicates that if the finest fractions are removed by a vacuum-assisted dry sweeper or a regenerative-air sweeper the risk of metal dispersion and its consequent risk for humans will be highly reduced. Therefore, we recommend that risk assessment programs include monitoring of metal concentrations in dust where each land-use is separately evaluated. The finest particle fractions should be examined explicitly in order to apply the most efficient measures for reducing the risk of inhalation and ingestion of dust for humans and risk for the environment.     

Cadmium and lead in bovine milk in the mining area of the Caudal River (Spain)

The levels of cadmium and lead in 36 raw bovine milk samples were analysed. These samples come from seven farms with a semi-extensive grazing system and were collected between the autumn of 2007 and the winter of 2008. All the farms were located in Asturias (Spain), a zone of great industrial and mining activity in the proximities of the Caudal River. The samples were collected in sterile precleaned polypropylene tubes and frozen until the analysis. After a lyophilization process, the samples were treated with nitric acid and microwave treatment. Cadmium and lead determinations were carried out using inductively coupled plasma mass spectrometry with sensibility under 0.2 ppb for liquid matrix. The lead content was found to vary from 0.71 to 16.06 μg/kg wet weight (w.w.), and the cadmium was lower than 2 μg/kg w.w. The levels of lead in milk are higher in those farms near zones of storage of mining waste depots, thermal power and areas with high levels of traffic. All the values found are in concordance with research carried out at non-polluted areas, and those for the lead are well below the European Union limitations.     

Study of urban atmospheric pollution in Navarre (Northern Spain)

An ambient air quality study was undertaken in two cities (Pamplona and Alsasua) of the Province of Navarre in northern Spain from July 2001 to June 2004. The data were obtained from two urban monitoring sites. At both monitoring sites, ambient levels of ozone, NO_x, and SO₂ were measured. Simultaneously with levels of PM₁₀ measured at Alsasua (using a laser particle counter), PM₁₀ levels were also determined at Pamplona (using a beta attenuation monitor). Mean annual PM₁₀ concentrations in Pamplona and Alsasua reached 30 and 28 μg m⁻³, respectively. These concentrations are typical for urban background sites in Northern Spain. By using meteorological information and back trajectories, it was found that the number of exceedances of the daily PM₁₀ limit as well as the PM₁₀ temporal variation was highly influenced by air masses from North Africa. Although North African transport was observed on only 9% of the days, it contributed the highest observed PM₁₀ levels. Transport from the Atlantic Ocean was observed on 68% of the days; transport from Europe on 13%; low transport and local influences on 7%; and transport from the Mediterranean region on 3% of the days. The mean O₃ concentrations were 45 and 55 μg m⁻³ in Pamplona and Alsasua, respectively, which were above the values reported for the main Spanish cities. The mean NO and NO₂ levels were very similar in both sites (12 and 26 μg m⁻³, respectively). Mean SO₂ levels were 8 μg m⁻³ in Pamplona and 5 μg m⁻³ in Alsasua. Hourly levels of PM₁₀, NO and NO₂ showed similar variations with the typically two coincident maximums during traffic rush hours demonstrating a major anthropogenic origin of PM₁₀, in spite of the sporadic dust outbreaks.     

Detection criteria and preventive measures for occupational disease in the mines of Almaden (Spain)

This research focuses on the metallurgy and underground mining job positions in the historic mines of Almaden (Spain). We introduce a preventive methodology for hydrargyrism in work environments known by the name of Methodology for Operational Units Action Levels for Health Indicators (MUONAIS). The methodology allows critical levels to be established using environmental and clinical–biological indicators. The prevention plan concentrated on 15 job positions in the metallurgy department that employed more than 100 workers between the years 1986 and 1997. The development of this preventive methodology managed to keep workers’ mercury levels below 60 μg/l in blood and 200 μg/l in urine, values that present no negative effects on human health. MUONAIS has proven very effective in protecting workers’ health. During this period, some cases of micro-mercurialism were detected, yet were completely reversible, allowing us to affirm that the terrible disease of hydrargyrism was totally eradicated.     

Main results of strategic noise maps and action plans in Navarre (Spain)

According to Directive 2002/49, strategic noise maps and their correspondent action plans were carried out in the Autonomous Community of Navarre, Spain. Six strategic noise maps were produced for 120 km of major roads as well as a strategic noise map for the Agglomeration of the Region of Pamplona (ARP) with a population of 280,199 inhabitants. In the ARP, a total of 36,400 people (13.0 %) are exposed to Ln levels over 55 dBA and 42,300 people (15.1 %) are exposed to Lden levels over 65 dBA. With regard to major roads, a total of 3,900 people are exposed to Ln levels over 55 dBA and 2,400 people are exposed to Lden levels over 65 dBA. When designing action plans, different prioritisation criteria concerning rank-based effectiveness measures (mainly the amount of people benefitting from them) were taken into account.     

Alteration of potential harmful elements levels in sediments and biota from the central Mediterranean Sea (Aeolian Archipelago) following an episode of intense volcanic activity

In this paper levels of four (Hg, Cd, Pb, As) potential harmful elements (PHE) were measured in three different environmental matrices (sediments, macroalgae and fishes) from the Aeolian Archipelago and control areas both after 1 and 10 months from a volcanic activity of particular relevance occurred at the end of October 2002. Results were analysed on a multivariate statistical basis with the aim to evaluate: (I) general levels of pollution and increase of PHE due to the event; (II) differences observed among tested matrices in the time of recovery after the occurrence of the critical event; (III) the biological enrichment of PHE along the trophic web produced by the geological event. Results evidenced that volcanic emissions could represent a local source of particular relevance able to determine great enrichments of considered PHE in sediments and biological species. After 10 months from the event, levels in sediments and macroalgae notably decreased, whereas fish species evidenced an increase, principally related to the bioaccumulation phenomena. On the basis of the biological enrichment factors (BEF), major enrichments were evidenced after 1 month whereas, after 10 months, were recorded values reliable to an incomplete recovery. Concerning Cd, the BEF higher levels reported for the species Serranus cabrilla was probably related both to the diet and to the specific detoxification rates of this species.     

Metal concentrations and potential health risk in clam (Meretrix lyrata Sowerby 1851) tissues from East Java Coast,Indonesia

Environmental Monitoring and Assessment - Global environmental changes not only contribute to the modification of global pollution transport pathways but can also alter contaminant fate within the...     

Evaluation of the urban/rural particle-bound PAH and PCB levels in the northern Spain (Cantabria region)

The aim of the present study was to evaluate the polycyclic aromatic hydrocarbon (PAH) and polychlorinated biphenyl (PCB) levels in PM(10) and PM(2.5), at one rural and three urban sites in the Cantabria region (northern Spain). From all of these pollutants, benzo(a)pyrene is regulated by the EU air quality directives; its target value (1?ng/m(3)) was not exceeded. The concentration values of the studied organic pollutants at the studied sites are in the range of those obtained at other European sites. A comparison between the rural-urban stations was developed: (a) PAH concentration values were lower in the rural site (except for fluorene). Therefore, the contribution of local sources to the urban levels of PAHs seems relevant. Results from the coefficient of divergence show that the urban PAH levels are influenced by different local emission sources. (b) PCB rural concentration values were higher than those found at urban sites. Because no local sources of PCBs were identified in the rural site, the contribution of more distant emission sources (about 40?km) to the PCB levels is considered to be the most important; the long-range transport of PCBs does not seem to be significant. Additionally, local PAH tracers were identified by a triangular diagram: higher molecular weight PAHs in Reinosa, naphthalene in Santander and anthracene/pyrene in Castro Urdiales. A preliminary PAH source apportionment study in the urban sites was conducted by means of diagnostic ratios. The ratios are similar to those reported in areas affected by traffic emissions; they also suggest an industrial emission source at Reinosa.     

Characterisation of particulate matter emissions from the Zimbabwe Mining and Smelting Company (ZIMASCO) Kwekwe Division (Zimbabwe): a ferrochrome smelter

Particulate matter emissions from stack number 2 of a majorferrochrome smelter, Zimbabwe Mining and Smelting Company(ZIMASCO) were characterized and the rates at which the elementsCr, Fe, Cu and Zn and total ferrochrome dust are emitted into theatmosphere were determined. The extent of soil contamination bythe dust deposited around the smelter in the generally prevailingsoutheasterly wind direction around the smelter was carried out.The highest concentrations of Cr and Fe occurred in the fineparticulates of sizes less than 59 m whilst that of Cu and Znoccurred in the coarse particulates of size range 70-100 m.The emission rates from stack 2 were; total ferrochromeparticulates 62.17 kg h^-1, Cr 6.217 kg h^-1, Fe 2.423 kg h^-1, Zn42 mg h^-1 and 6 mg h^-1 for Cu. Particulate matter was emitted at arate of 289 mg m^-3 from stack number 2. This value exceeds thelegal limit of 200 mg m^-3. Chromium and iron are the metalsin the largest amounts. The particles that constitute the largestproportion of the dust were in the range of 58-107.5 m. Thisis a characteristic feature of the particulate matter emissionsfrom ZIMASCO. Soils in the downwind direction from the smelterwere polluted with Cr up to a distance of about 700 m outward fromthe perimeter of the boundary of the smelter.     

Detection of airborne Legionella while showering using liquid impingement and fluorescent in situ hybridization (FISH)

Aerosols of water contaminated with Legionella bacteria constitute the only mode of exposure for humans. However, the prevention strategy against this pathogenic bacteria risk is managed through the survey of water contamination. No relationship linked the Legionella bacteria water concentration and their airborne abundance. Therefore, new approaches in the field of the metrological aspects of Legionella bioaerosols are required. This study was aimed at testing the main principles for bioaerosol collection (solid impaction, liquid impingement and filtration) and the in situ hybridization (FISH) method, both in laboratory and field assays, with the intention of applying such methodologies for airborne Legionella bacteria detection while showering. An aerosolization chamber was developed to generate controlled and reproducible L. pneumophila aerosols. This tool allowed the identification of the liquid impingement method as the most appropriate one for collecting airborne Legionella bacteria. The culturable fraction of airborne L. pneumophila recovered with the liquid impingement principle was 4 and 700 times higher compared to the impaction and filtration techniques, respectively. Moreover, the concentrations of airborne L. pneumophila in the impinger fluid were on average 7.0 x 10(5) FISH-cells m(-3) air with the fluorescent in situ hybridization (FISH) method versus 9.0 x 10(4) CFU m(-3) air with the culture method. These results, recorded under well-controlled conditions, were confirmed during the field experiments performed on aerosols generated by hot water showers in health institutions. This new approach may provide a more accurate characterization of aerobiocontamination by Legionella bacteria.     

A field study of the influence of land management and soil properties on runoff and soil loss in central Spain

Since the 1950s afforestation of degraded land has been the principal means of combatting erosion in a seasonally arid area of central Spain. In the 1970s tree planting of steep hillsides and gully sides was preceded by bench terracing. Experimental sites have been established to monitor runoff and soil losses under mature Pinus forest, 12-year-old Pinus forest, and Cistus matorral. The experiment is being conducted at three scales: large gully or small watershed (c. 3.5 ha), runoff erosion plot (10–21.5 m²), and rainfall simulation plot (1 m²). Monitoring began in October 1992. Discharge was recorded continuously, while sediment loss and soil moisture content were measured on a storm basis. The paper presents summary data on runoff and soil erosion for the three scales and comments on relationships between land management, site characteristics, and these losses. We stress the crucial role of vegetation and its interrelationship with soil properties such as structure and aggregate stability. Matorral was effective in combatting water and soil loss, but we question the practice of afforesting seasonally arid, steeply sided areas that have highly erodible soils.     

Characterisation of airborne uranium and thorium contamination in northern England through measurement of U, Th and 235U/238U in tree bark

Samples of tree bark were collected from four locations in Northern England (a typical rural site, a coal-fired power station, a uranium (isotopic) enrichment plant and a nuclear fuel fabrication facility), to assess the nature and extent of airborne uranium and thorium contamination. The U and Th concentrations of bark were determined by inductively coupled plasma mass spectrometry after conventional nebulisation of bark digests, whilst measurement of 235U/238U isotopic ratio utilised high efficiency nebulisation. Uranium concentrations varied between and within the sites (range, 0.01-12 micrograms g-1), with maximum values recorded within 1 km of the nuclear fuel fabrication plant (Springfields). In comparison, the concentration of Th in bark was low (mean, 0.018 microgram g-1) at all sites with the exception of the area affected by coal combustion (0.2-0.8 microgram g-1). The U/Th ratio varied from 0.5 to 3900 compared with the average crustal ratio of 0.3. Low values (< 2) were recorded at the 'coal' and 'rural' sites whilst Capenhurst and Springfields showed high values indicating the relative magnitude of uranium elevation. Significant enrichment of the natural 235U/238U ratio (0.00725) was observed near the nuclear installations, in particular, the enrichment plant (Capenhurst).     

The potential of elemental and isotopic analysis of tree bark for discriminating sources of airborne lead contamination in the UK

Samples of tree bark, which accumulate airborne material, were collected from seven locations in the UK to provide an indication of the magnitude and source of lead pollution. Measurement of the Pb content and 206/207Pb stable isotope ratio by inductively coupled plasma mass spectrometry revealed significant differences between the sites. The concentration of Pb varied over almost four orders of magnitude from 7.2 to 9,600 micrograms g-1, the maximum values being found near a 'secondary' Pb smelter. The 206/207Pb isotope ratios varied from 1.108 +/- 0.002 to 1.169 +/- 0.001. The lowest Pb concentrations and highest isotope ratios were detected in bark samples from the Scilly Isles, reflecting the low-level of industry and road traffic. In contrast, samples obtained from a city centre (Sheffield) and near a motorway (M1) contained 25-46 micrograms g-1 Pb and recorded the lowest 206/207Pb ratios. Higher concentrations in the vicinity of a coal-fired power station recorded a 206/207Pb ratio of 1.14, suggesting a significant contribution from fly-ash. The relative contribution of lead from petrol (206/207Pb = 1.08) and other sources such as coal (206/207Pb = 1.18) were thus estimated using mass balance equations. Tree bark near the lead smelter recorded an intermediate 206/207Pb ratio of 1.13 reflecting the processing of material of mixed origin.