Persistence of fipronil and its metabolites in soil under field conditions

Fipronil belongs to phenylpyrazole class of chemical compounds. Degradation of fipronil in sandy loam soil was investigated under field conditions by applying fipronil (Regent 5 % SC) at 50 (T ₁) and 100 g a.i. ha^?1 (T ₂) in field. Samples were drawn periodically in triplicate on 0 (1 h after treatment), 1, 3, 7, 10, 15, 30, 60, and 90 days after treatment and analyzed on GC-ECD system equipped with capillary column. The residues of fipronil in both the doses dissipated in the range of 93.33–100 % in 90 days. Limit of detection (LOD) and limit of determination (LODe/LOQ) were 0.0003 and 0.001 mg kg^?1, respectively. Dissipation followed a biphasic first-order kinetics with half-life values of 10.81 and 9.97 days for fipronil alone and 8.14 and 13.05 days for fipronil along with metabolites in soil at (T ₁) and (T ₂) treatments, respectively.     

Persistence behaviour of imidacloprid and its metabolites in soil under sugarcane

The persistence and metabolism of imidacloprid in soil under sugarcane were studied following application of imidacloprid at 20 and 80 g active ingredient (a.i.) ha^?1. Soil samples were collected at different time intervals (7, 15, 30, 45, 60 and 90 days after application), and the residues of imidacloprid and its metabolites (6-chloronicotinic acid, nitrosimine, imidacloprid-NTG, olefin, urea and 5-hydroxy) were quantified by high-performance liquid chromatography. In soil, the total imidacloprid residues were mainly constituted by the parent compound followed by 6-chloronicotinic acid, nitrosimine and imidacloprid-NTG metabolites. Maximum residues of imidacloprid and its metabolites were 4.29 and 7.81 mg kg^?1 in soil samples collected 7 days after the application of imidacloprid at 20 and 80 g a.i. ha^?1, respectively. At both doses, these residues declined to below the detectable limit in soil after 90 days of application. Olefin, urea and 5-hydroxy metabolites were not detected in soil. Dissipation of total imidacloprid residues did not follow the first-order kinetics with a coefficient of determination value of 0.883 and 0.838 for the recommended dose and four times the recommended dose, respectively. The half-life (T _1/2) value of total imidacloprid was observed to be 10.64 and 10.10 days for the recommended dose and four times the recommended dose, respectively.     

环境样品阿特拉津及降解产物分析方法进展

阿特拉津是一种世界范围广泛使用的除草剂。文章介绍了环境样品中阿特拉津及其降解产物分析的前处理技术和分析方法的研究进展,并为今后的研究方向提出了建议。     

Safety evaluation of flubendiamide and its metabolites on cabbage and persistence in soil in different agroclimatic zones of India

Supervised field trials following good agricultural practices were conducted at the research farms of four agricultural universities located at four different agroclimatic zones of India to evaluate the persistence and dissipation of flubendiamide and its metabolite, des-iodo flubendiamide, on cabbage. Two spray applications of flubendiamide 480 SC of standard and double dose at the rate of 24 and 48 g a.i. ha^?1 were given to the crop at a 15-day interval, and the residues of flubendiamide 2 h after spray were found in the range of 0.107–0.33 and 0.20–0.49 mg kg^?1 at respective doses. Residue of des-iodo flubendiamide was not detected in any cabbage sample during study period. No residues were found in the soil samples collected from all treated fields after 15 days of application. On the basis of data generated under All India Network Project on Pesticide Residues, a preharvest interval (PHI) of 10 days has been recommended, and the flubendiamide 480 SC has been registered for its use on cabbage by Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India. The maximum residue limit (MRL) of flubendiamide on cabbage has been fixed by the Ministry of Health and Family Welfare, Government of India, under Food Safety Standard Authority of India as 0.05 μg/g after its risk assessment.     

Simultaneous determination of insecticide fipronil and its metabolites in maize and soil by gas chromatography with electron capture detection

An integrated method for the simultaneous determination of insecticide fipronil and its three metabolites, desulfinyl, sulfide, and sulfone, in maize grain, maize stem, and soil was developed. This three-step method uses liquid–solid extraction with ultrasound or mechanical grinding, followed by liquid–liquid partitioning and florisil solid-phase extraction (SPE) for cleanup. The quantification was conducted by gas chromatography–electron capture detection in triplicate for each sample. The method was validated with five replicates at three fortification concentrations, 0.002, 0.01, and 0.1 mg kg^?1, in each matrix and gave mean recoveries from 83 to 106 % with relative standard deviation ≤8.9 %. The limits of quantification (LOQ) were 0.002 mg kg^?1 for the compounds in all matrixes. In the field study in Beijing and Shandong 2012, fipronil-coated maize seeds were planted and the proposed method was applied for checking the possible existence of four compounds in maize and soil samples, but none of them contained residues higher than the LOQs in both application rates. Moreover, the dissipation of fipronil in soil fits first-order kinetics with half-lives 9.90 and 10.34 days in Beijing and Shandong, respectively. Combined with an adequate sample treatment, this technique offers good sensitivity and selectivity in the three complex matrixes. The results could provide guidance for the further research on pesticide distribution and safe use of fipronil as seed coat in cereals.     

Simultaneous analysis of endosulfan, chlorpyrifos, and their metabolites in natural soil and water samples using gas chromatography-tandem mass spectrometry

Analysis of endosulfan, chlorpyrifos, and their nonpolar metabolites in extracts from environmental aqueous and soil samples was performed using a gas chromatography-tandem mass spectrometry (GC–MS/MS) technique. Full-scan GC–MS analysis showed poor sensitivity for some of the metabolites (endodiol and endosulfan ether). A multisegment MS/MS method was developed and MS/MS parameter isolation time, excitation time, excitation voltage, and maximum excitation energy were optimized for chosen precursor ions to enhance selectivity and sensitivity of the analysis. The use of MS/MS with optimized parameters quantified analytes with significantly higher accuracy, and detection limits were lowered to ~1/6th compared with the full-scan method. Co-eluting compounds, chlorpyrifos and chlorpyrifos oxon, were also analyzed successfully in the MS/MS mode by choosing exclusive precursor ions. Analysis of soil and water phase samples from contaminated soil slurry bioreactors showed that the MS/MS method could provide more reliable estimates of these pesticide and metabolites (especially those present in low concentrations) by annulling interferences from soil organic matter.     

Effect of elevated CO2 on degradation of azoxystrobin and soil microbial activity in rice soil

An experiment was conducted in open-top chambers (OTC) to study the effect of elevated CO₂ (580?±?20 μmol mol^?1) on azoxystrobin degradation and soil microbial activities. Results indicated that elevated CO₂ did not have any significant effect on the persistence of azoxystrobin in rice-planted soil. The half-life values for the azoxystrobin in rice soils were 20.3 days in control (rice grown at ambient CO₂ outdoors), 19.3 days in rice grown under ambient CO₂ atmosphere in OTC, and 17.5 days in rice grown under elevated CO₂ atmosphere in OTC. Azoxystrobin acid was recovered as the only metabolite of azoxystrobin, but it did not accumulate in the soil/water and was further metabolized. Elevated CO₂ enhanced soil microbial biomass (MBC) and alkaline phosphatase activity of soil. Compared with rice grown at ambient CO₂ (both outdoors and in OTC), the soil MBC at elevated CO₂ increased by twofold. Elevated CO₂ did not affect dehydrogenase, fluorescein diacetate, and acid phosphatase activity. Azoxystrobin application to soils, both ambient and elevated CO₂, inhibited alkaline phosphates activity, while no effect was observed on other enzymes. Slight increase (1.8–2 °C) in temperature inside OTC did not affect microbial parameters, as similar activities were recorded in rice grown outdoors and in OTC at ambient CO₂. Higher MBC in soil at elevated CO₂ could be attributed to increased carbon availability in the rhizosphere via plant metabolism and root secretion; however, it did not significantly increase azoxystrobin degradation, suggesting that pesticide degradation was not the result of soil MBC alone. Study suggested that increased CO₂ levels following global warming might not adversely affect azoxystrobin degradation. However, global warming is a continuous and cumulative process, therefore, long-term studies are necessary to get more realistic assessment of global warming on fate of pesticide.     

Rapid in situ assessment for predicting soil quality using an algae-soaked disc seeding assay

The soil quality of remediated land is altered and this land consequently exerts unexpected biological effects on terrestrial organisms. Therefore, field evaluation of such land should be conducted using biological indicators. Algae are a promising new biological indicator since they are a food source for organisms in higher soil trophic levels and easily sampled from the soil. Field evaluation of soil characteristics is preferred to be testing in laboratory conditions because many biological effects cannot be duplicated during laboratory evaluations. Herein, we describe a convenient and rapid algae-soaked disc seeding assay for assessing soil quality in the field based on soil algae. The collection of algae is easy and rapid and the method predicts the short-term quality of contaminated, remediated, and amended farm and paddy soils. The algae-soaked disc seeding assay is yet to be extensively evaluated, and the method cannot be applied to loamy sand soil in in situ evaluations. The algae-soaked disc seeding assay is recommended for prediction of soil quality in in situ evaluations because it reflects all variations in the environment. The algae-soaked disc seeding assay will help to develop management strategies for in situ evaluation.     

Effect of humic deposit (leonardite) on degradation of semi-volatile and heavy hydrocarbons and soil quality in crude-oil-contaminated soil

In order to investigate the bioremedial potential of humic deposit (leonardite), the effects of the treatments of leonardite and a commercial bioaugmentation agent on the degradation of a variety of petroleum hydrocarbons (C13–C31) and soil enzyme activities (urease acid-alkaline phosphatase and dehydrogenase) were tested within a soil incubation experiment lasting 120 days. Experimentally crude-oil-contaminated soil (2.5%) was regulated to a C:N:P ratio (100:15:1; Oilcon), amended with 5% of leonardite and regulated to the same C:N:P ratio (Oilcon-L) or mixed with a commercial bioaugmentation product (Oilcon-B), respectively. In the short period of incubation (60 days), Oilcon and Oilcon-B treatments showed higher hydrocarbon degradations, whereas Oilcon-L showed higher hydrocarbon degradation over Oilcon and Oilcon-B treatments in the long-term (120 days). Applying contaminated soil with leonardite increased urease (LSD, 4.978, *P?<?0.05) and dehydrogenase (LSD, 0.660, *P?<?0.05) activities. However, acid and alkaline phosphatase activities showed no certain inclination between different treatments. Dehydrogenase seemed to be more related to hydrocarbon degradation process. Overall results showed that leonardite enhanced biodegradation of petroleum hydrocarbons and also stimulated soil ecological quality measured as soil enzyme activities.     

The source of DDT and its metabolites contamination in Turkish agricultural soils

The concentration and impact of 1,1,1-trichloro-2,2-bis(4-chlorophenyl)-ethane (DDT) and its metabolites (DDE: 1,1-dichloro-2,2-bis(4-chlorophenyl)ethylene) on the environment was expected to decrease after its ban in the mid-1980s. Unfortunately, DDT contamination via its presence as an impurity in dicofol (2,2,2-trichloro-1,1-bis(4-chlorophenyl)ethanol) has led to a new source of contamination. This is particularly true especially in cotton production in Söke Plain, Turkey, where difocol-based pesticides are being used. The aim of this research was to investigate the extent and source of DDT contamination in cotton soils. Söke Plain soil samples were collected from 0–30, 30–60, and 60–90-cm depth and analyzed by GC/MS/MS. o,p′-DDT and p, p′-DDE were detected at 16.2 % and 17.6 % of the sites in the 0–30-cm depth of soils. In the 30–60 cm, p, p′-DDT (14.9 %), o, p′-DDE (8.1 %) and p, p′-DDE (2.7 %) were found in soil samples, and p, p′-DDT was the most prevalent with 9.5 % of the sampling sites. The dominant source of DDT particularly in the 60–90-cm depth was due to historic use of DDT. The presence of p, p′-DDE, o, p′-DDE and p,p′-DDT in the topsoil was attributed to recent dicofol applications.     

Labile pools of Pb in vegetable-growing soils investigated by an isotope dilution method and its influence on soil pH

Pollution of Pb in the surface of agricultural soils is of increasing concern due to its serious impact on the plant growth and the human health through the food chain. However, the mobility, activity and bioavailability of Pb rely mainly on its various chemical species in soils. In the present study, E and L values, the labile pools of isotopically exchangeable Pb, were estimated using the method of isotope dilution in three vegetable-growing soils. The experiments involved adding a stable enriched isotope ((206)Pb > 96%) to a soil suspension and to soils in which plants are subsequently grown, the labile pools of Pb were then estimated by measuring the isotopic composition of Pb in soil solutions and in the plant tissues, respectively. In addition, the correlation of E values and soil pH was investigated at the ranges of pH 4.5-7.0. The amount of labile Pb in soils was also estimated using different single chemical extractants and a modified BCR approach. The results showed that after spiking the enriched isotopes of (206)Pb (>96%) for 24 hours an equilibration of isotopic exchanges in soil suspensions was achieved, and the isotope ratios of (208)Pb/(206)Pb measured at that time was used for calculating the E(24 h) values. The labile pools of Pb by %E(24 h) values, ranging from 53.2% to 61.7% with an average 57%, were found to be significantly higher (p < 0.05) than the values estimated with L values, single chemical extractants and the Σ(BCR) values obtained with the BCR approach, respectively. A strong negative correlation (R(2) = 0.984) between E(24 h) values and soil pH was found in the tested soil sample. The results indicate that the %E(24 h) value can more rapidly and easily predict the labile pools of Pb in soils compared with L values, but it might be readily overestimated because of the artificial soil acidity derived from the spiked isotopic tracer and the excess of spiked enriched isotopes. The results also suggest that the amounts of Pb extracted with EDTA and the Σ(BCR) values extracted with the modified BCR approach are helpful to detect the labile pools of Pb in soils. In addition, the negative correlation between soil pH and the labile pools of Pb in soils may be useful for further remediation to reduce the bioavailability of Pb in contaminated soils.     

Residues and dissipation of trifloxystrobin and its metabolite in tomatoes and soil

A simple residue analytical method using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) procedure for the determination of trifloxystrobin and its metabolite trifloxystrobin acid (CGA321113) in tomato and soil was developed using high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The limits of detection were 0.0005 mg/kg for trifloxystrobin and 0.001 mg/kg for trifloxystrobin acid, respectively. The average recoveries in tomato and soil ranged from 73–99 % for trifloxystrobin and 75–109 % for trifloxystrobin acid, with relative standard deviations below 15 %. The method was then used to study the dissipation and residues in tomato and soil. The dissipation half-lives of trifloxystrobin in tomato were 2.9 days (Beijing) and 5.4 days (Shandong), while in soil were 1.9 days (Beijing) and 3.0 days (Shandong), respectively. The final results showed that the major residue compound was trifloxystrobin in tomato whereas it was its metabolite, trifloxystrobin acid, in soil. The final residues of total trifloxystrobin (including trifloxystrobin acid) were below the EU maximum residue limit of 0.5 mg kg^?1 in tomato 3 days after the treatment.     

Microbial activities and trace element contents in an urban soil

Soil biological properties are influenced by trace metals. The main sources of these pollutants in the urban areas are industrial plants, power stations, domestic heating systems and motor vehicles. The aim of this work was to evaluate, in relation to distance from urban roads, soil trace metal concentrations (Pb, Cu, Cr, Cd and V) and their influence on C-microbial biomass as well as on soil respiration and enzyme activities (phosphatase glucosidase, galactosidase, xylanase, cellulase, trealase, protease and invertase). The samplings were carried out at four sites, along a route that goes from Giannone Street to Passionisti Street, two heavily travelled roads at two different times of the year (spring and autumn). Heavy metal contents and microbial activities were highest at the sites near the roads. The highest values of microbial activities were found in the inner site; here, on the contrary, the lowest concentrations of heavy metals were measured. Significant and negative correlations were found between microbial activity and heavy metal contents.     

我国《土壤环境质量标准》现存问题与建议

环境立法是环境保护的基础,<土壤环境质量标准>的制定,对于保护我国的土壤资源起到积极的促进作用,但其也存在一些不足之处.文章从实际工作出发,探讨了本标准的现存问题,并对<土壤环境质量标准>的制定原则和污染物一、二级指标的确立及监测提出了一些建议.     

Evaluation of interactive toxicity of chlorophenols in water and soil using lux-marked biosensors

An assessment of the toxicity of three chlorophenol compounds (2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TCP) and pentachlorophenol (PCP)), individually and in combinations, was made in deionised water, soil extracts and soils using the lux-marked microbial biosensors: Escherichia coli HB101 pUCD607 and Pseudomonas fluorescens 10586r pUCD607. These biosensors responded to the bioavailable fraction of pollutants enabling a rapid and ecologically relevant toxicity test. Toxicity interaction responses of pollutant mixtures were predicted after individual compounds were assessed. Synergistic interactions were observed in the response of P. fluorescens to all combinations of chlorophenols tested, while the toxicity response of E. coli varied with the matrices tested. Soil characteristics influenced the toxicity response when compared with aqueous solutions. These results highlight the significance of interactive factors and physicochemical parameters when evaluating toxicity. To develop an understanding of pollution derived hazard assessment in soils we need to integrate a wide spectrum of parameters.     

Atrazine Transport Within a Coastal Zone in Southeastern Puerto Rico: a Sensitivity Analysis of an Agricultural Field Model and Riparian Zone Management Model

Agrichemical runoff from farmland may adversely impact coastal water quality. Two models, the Agricultural Policy/Environmental eXtender (APEX) and the Riparian Ecosystem Management Model (REMM), were used to evaluate the movement of the herbicide atrazine to the Jobos Bay National Estuarine Research Reserve from adjacent fields. The reserve is located on Puerto Rico’s southeast coast. Edge-of-field atrazine outputs simulated with the APEX were routed through a grass-forest buffer using the REMM. Atrazine DT₅₀ (half-life) values measured in both field and buffer soils indicated that accelerated degradation conditions had developed in the field soil due to repeated atrazine application. APEX simulations examined both the measured field and buffer soil atrazine DT₅₀ and the model’s default value. The use of the measured field soil atrazine degradation rate in the APEX resulted in 33 % lower atrazine transport from the field. REMM simulations indicated that the buffer system had the potential to reduce dissolved atrazine transport in surface runoff by 77 % during non-tropical storm events by increasing infiltration, slowing transport, and increasing time for pesticide degradation. During a large runoff event due to a tropical storm that occurred close to the time of an atrazine application, the REMM simulated only a 37 % reduction in atrazine transport. The results indicate that large storm events soon after herbicide application likely dominate herbicide transport to coastal waters in the region. These results agree with water quality measurements in the reserve. This study demonstrated the sensitivity of these models to variations in DT₅₀ values in evaluating atrazine fate and transport in the region and emphasizes that the use of measured DT₅₀ values can improve model accuracy.     

New procedures for simultaneous determination of mesotrione and atrazine in water and soil. Comparison of the degradation processes of mesotrione and atrazine

A method for the determination of residues of mesotrione, atrazine and its degradation products: deethylatrazine, hydroxyatrazine, deisopropylatrazine, desethyldesisopropylatrazine in a variety of water and soil matrices has been developed. Mesotrione is a new selective herbicide for use in corn, which has been substituted for atrazine, which has been banned in European Union countries since 2007. Although atrazine has not been used for three vegetative periods, it is still detected in the environment. The analysis was conducted by means of ultra-high-pressure liquid chromatography with ultraviolet detection and liquid chromatography with diode array detection. The procedures for analyte separation from water and soil matrices were also established. The optimal conditions for solid-phase extraction (SPE) were determined. The recoveries were compared with that obtained by means of SPE. Method fortification recoveries from water samples averaged 78–97% and for soil 80–97% depending on the analyte and type of sample. The limits of detection were 0.04–0.61 μg/L for water samples and for soil samples 0.02–0.88 μg/g. The soil samples were collected in spring 2009 from three different fields with water samples being made from effluents from these fields. Samples collection was conducted in the day of mesotrione (Callisto 100SC) application and then done weekly, until the mesotrione concentration was below the limit of quantification. The results enabled the monitoring of mesotrione degradation in soil and its permeability into surface waters; simultaneously, the same studies were conducted for atrazine.     

An assessment of metal pollution in surface sediments of Seyhan dam by using enrichment factor, geoaccumulation index and statistical analyses

The aim of this study was to determine if high concentrations of any heavy metals exist in the sediment of Seyhan Dam reservoir to be considered toxic to the aquatic environment. Surface sediment samples from five stations in the Seyhan dam were collected quarterly from 2004 to 2005 and examined for metal content (Cr, Zn Cu, Mn, Cd, Fe, Ca, K, and Na), organic matter, and grain size. Correlation analyses showed that metal content of Seyhan dam sediment was affected by organic matter and grain size. The results have been compared with values given in the literature. The evaluation of the metal pollution status of the dam was carried out by using the enrichment factor and the geoaccumulation index. A comparison with sediment quality guideline values has also been made. Based on the enrichment factor, dam sediments were treated as a moderately severe enrichment with Cd and minor enrichment with Cr and Mn. The results of geoaccumulation index reveal that sediments of Seyhan Dam were strongly polluted in stations 1, 2, 4, and 5, and were moderately polluted in station 3 with Cd. Moreover, Cd and Cr concentrations in the sediments were above TECs except ERL for Cd.     

Determination and study on dissipation and residue of bismerthiazol and its metabolite in Chinese cabbage and soil

A simple and accurate method for the determination of bismerthiazol and its metabolite 2-amino-5-mercapto-1,3,4-thiadiazole was developed in Chinese cabbage and soil by high-performance liquid chromatography-diode array detection in this study. The limits of detection were 0.06 mg/kg for bismerthiazol and 0.03 mg/kg for 2-amino-5-mercapto-1,3,4-thiadiazole, respectively. Recoveries of cabbage and soil were investigated at three spiking levels and were in the range of 84.0–96.0 % for bismerthiazol and 71.0–74.6 % for 2-amino-5-mercapto-1,3,4-thiadiazole, with relative standard deviations below 7.0 %. For field experiments, the half-life of bismerthiazol was 2.4–2.5 days in Chinese cabbage and 2.5–4.8 days in soil at the two experimental locations in China. Dissipation residues of 2-amino-5-mercapto-1,3,4-thiadiazole were lower than 0.72 mg/kg. Terminal residues of bismerthiazol and its metabolite were less than 3.0 and 0.3 mg/kg in Chinese cabbage, respectively. No bismerthiazol or metabolite residues were detected in soil on days 5, 7, 10, and 14 after the last spraying at the two dosage levels.