Comparative assessment of essential and heavy metals in fruits from different geographical origins

The aim of this investigation was to estimate and compare essential and heavy metals contents in 98 commercially available fresh fruits from different geographic regions using multivariate techniques. The concentrations of 12 elements (calcium, magnesium, potassium, sodium, phophorus, cobalt (Co), manganese, iron, chromium (Cr), nickel (Ni), zinc and copper) were determined using flame atomic absorption spectrometry with deuterium-background correction. Phosphorus was determined in the form of phosphomolybdate by a spectrophotometric method. Reliability of the procedure was checked by analysis of the certified reference materials tea (NCS DC 73351), cabbage (IAEA-359) and spinach leaves (NIST-1570). Recoveries of the elements analysed varied between 85.5 and 103 %, and precisions for the reference materials were 0.13–6.08 %. Based on recommended dietary allowance and adequate intake estimated for essential elements, it was concluded that accessory fruits such as pineapples, raspberries and strawberries supply organism with the highest amounts of bioelements. Although accessory fruits were also found to be the greatest source of Ni among all the analysed fruits, in all the fruits Ni was more abundant than Cr and Co. Significant correlation coefficients (p?<?0.001, p?<?0.01 and p?<?0.05) were found between concentrations of some metals in fresh fruits. Application of ANOVA Kruskal–Wallis test and multivariate techniques such as factor analysis and cluster analysis enabled us to differentiate particular botanical families and types of fruits.     

Monitoring of total and bioavailable heavy metals concentration in agricultural soils

The aim of this paper is to evaluate total and bioavailable concentration of heavy metals in agricultural soils in order to estimate their distribution, to identify the possible correlations among toxic elements and the pollution sources, to distinguish the samples in relation to sampling site or to sampling depth, and to evaluate the available fraction providing information about the risky for plants. In particular, we reinvestigated total concentrations of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sb, V, and Zn and available concentrations of As, Be, Cd, Cr, Cu, Hg, Ni, Pb, Sb, and Zn in soil from Apulia (Southern Italy). Analytical results showed that total concentrations, for all soils, are in the range permitted by regulations in force in Italy, but some soils evidence slight enrichment of Cd, Cr, Cu, Pb, and Zn. All the heavy metals in the available fraction were below the detection limits of the analytical techniques used except Cu, Ni, Pb, and Zn.     

Atmospheric deposition and storm induced runoff of heavy metals from different impermeable urban surfaces

Contaminants deposited on impermeable surfaces migrate to stormwater following rainfall events, but accurately quantifying their spatial and temporal yields useful for mitigation purposes is challenging. To overcome limitations in current sampling methods, a system was developed for rapid quantification of contaminant build-up and wash-off dynamics from different impervious surfaces. Thin boards constructed of concrete and two types of asphalt were deployed at different locations of a large carpark to capture spatially distributed contaminants from dry atmospheric deposition over specified periods of time. Following experimental exposure time, the boards were then placed under a rainfall simulator in the laboratory to generate contaminant runoff under controlled conditions. Single parameter effects including surface roughness and material composition, number of antecedent dry days, rain intensity, and water quality on contaminant build-up and wash-off yields could be investigated. The method was applied to quantify spatial differences in deposition rates of contaminants (TSS, zinc, copper and lead) at two locations varying in their distance to vehicle traffic. Results showed that boards exposed at an unused part of the carpark >50 m from vehicular traffic captured similar amounts of contaminants compared with boards that were exposed directly adjacent to the access route, indicating substantial atmospheric contaminant transport. Furthermore, differences in contaminant accumulation as a function of surface composition were observed. Runoff from asphalt boards yielded higher zinc loads compared with concrete surfaces, whereas runoff from concrete surfaces resulted in higher TSS concentrations attributed to its smoother surfaces. The application of this method enables relationships between individual contaminant behaviour and specific catchment characteristics to be investigated and provides a technique to derive site-specific build-up and wash-off functions required for modelling contaminant loads from impermeable surfaces.     

Monitoring of heavy metals uptake and allocation in Pinus sylvestris organs in alkalised soil

The concentration of heavy metals in soil and in Scots pine (Pinus sylvestris) organs growing on a pH gradient from 4.0 to 7.9 of soil at different distances from a cement plant was monitored. Emission for over 40 years of alkaline dust (pH 12.3-12.6) into the atmosphere in North Estonia had resulted in alkalisation and elevated concentration of total heavy metals in upper layers of the soil (0-30 cm), which was considerable even 10 years after the dust pollution stopped. Monitoring showed that the accumulation and allocation of heavy metals varied between the stem, shoots and needles and differed from the trees in the unpolluted area, depending more on the mobility of elements and the pH than element concentrations in the alkaline soil. A strong negative correlation was found between the soil pH and Mn, Zn and Cd concentrations in different tree organs. Compared to the unpolluted area, Pb was present in relatively higher concentrations in all organs but Cr, Fe and Cu in needles and shoots. The concentrations of Mn and Cd were much lower than control in all organs of trees in alkalised soil. The height increment and density of needles on shoots were predominantly in negative correlation with the pH of soil.     

Monitoring trace metals in different tissues of Cyprinus carpio from the Indus River in Pakistan

This replicated 4×2 factorial study investigated the bioaccumulation of selected metals (Mn, Pb, Zn, Hg and Cr) in four tissues (gills, liver, muscle and skin) of common carp (Cyprinus carpio) domiciled in two sites (upstream and downstream) of Indus River in Mianwali district of Pakistan. The data were statistically compared for the main effects of the site and fish organs and their interaction on the bioaccumulation pattern of these metals in fish organs at P?P?相似文献   

Monitoring of ambient particles and heavy metals in a residential area of Seoul, Korea

In this study, ambient TSP, PM10, and PM2.5 in a residential area located in the northern part of Seoul were monitored every other month for 1 year from April 2005 to February 2006. The monthly average levels of TSP, PM10, and PM2.5 had ranges of 71∼158, 40∼106, and 28∼43 μg/m³, respectively. TSP and PM10 showed highest concentration in April; this seems to be due to Asian dust from China and/or Mongolia. However, the fine particle of PM2.5 showed a relatively constant level during the monitoring period. Heavy metals in PM 10 and PM2.5, such as Cr, As, Cd, Mn, Zn and Pb, were also analysed during the same period. The monthly average concentrations of heavy metal in PM2.5 were Cr:1.9∼22.7 ng/m³; As:0.9∼2.5 ng/m³; Cd: 0.6∼7 ng/m³; Mn:6.1∼22.6 ng/m³; Zn: 38.9∼204.8 ng/m³, and Pb: 21.6∼201.1 ng/m³. For the health risk assessment of heavy metals in ambient particles, excess cancer risks were calculated using IRIS unit risk. As a result, the excess cancer risks of chromium, cadmium, and arsenic were shown to be more than one per million based on the annual concentration of heavy metals, and chromium showed the highest excess cancer risk in ambient particles in Seoul.     

Biomonitoring of heavy metals in fish from the Danube River

The Croatian part of the Danube River extends over 188 km and comprises 58 % of the country’s overall area used for commercial freshwater fishing. To date, the heavy metal contamination of fish in the Croatian part of the Danube has not been studied. The main purpose of this study was to determine heavy metal levels in muscle tissue of sampled fish species and to analyze the measured values according to feeding habits of particular groups. Lead ranged from 0.015 μg^?1 dry weight in planktivorous to 0.039 μg^?1 dry weight in herbivorous fish, cadmium from 0.013 μg^?1 dry weight in herbivorous to 0.018 μg^?1 dry weight in piscivorous fish, mercury from 0.191 μg^?1 dry weight in omnivorous to 0.441 μg^?1 dry weight in planktivorous fish and arsenic from 0.018 μg^?1 dry weight in planktivorous to 0.039 μg^?1 dry weight in omnivorous fish. Among the analyzed metals in muscle tissue of sampled fish, only mercury exceeded the maximal level (0.5 mg kg^?1) permitted according to the national and EU regulations determining maximum levels for certain contaminants in foodstuffs, indicating a hazard for consumers of fish from the Danube River.     

Analysis of heavy metals in marine fish from Mumbai Docks

Seafood containing heavy metals as a result of environmental contamination causes toxicity in human beings. To evaluate such kind of contamination, our study targeted the analysis of metals such as lead, copper, cadmium, mercury, and arsenic in muscle tissue of the fish. The fish commonly consumed such as Brama brama (Pomfret), Rachycentron canadus (Surmai/King Fish), Rastrelliger kanagurta (Mackerel), Eleutheronema tetradactylum (Ravas/Indian salmon), and Metapenaeus monoceros (Brown Prawn) were collected from four different docks in the city. The heavy metals in tissue samples of fish were estimated using voltammeter and cold vapor atomic absorption spectrophotometer. Heavy metal concentration in the tissues varied significantly depending upon the locations from where the fish were collected. Although the concentration of arsenic, copper, cadmium, and lead were in normal range, the concentration of mercury was found to exceed the daily permissible levels (1 μg/g) as a food source for human consumption. We have analyzed heavy metals from different locations in Mumbai—Versova dock, Sassoon dock, Navi Mumbai dock, and Mazgaon dock.     

Monitoring of trace amounts of heavy metals in different food and water samples by flame atomic absorption spectrophotometer after preconcentration by amine-functionalized graphene nanosheet

We are introducing graphene oxide modified with amine groups as a new solid phase for extraction of heavy metal ions including cadmium(II), copper(II), nickel(II), zinc(II), and lead(II). Effects of pH value, flow rates, type, concentration, and volume of the eluent, breakthrough volume, and the effect of potentially interfering ions were studied. Under optimized conditions, the extraction efficiency is >97 %, the limit of detections are 0.03, 0.05, 0.2, 0.1, and 1 μg L^?1 for the ions of cadmium, copper, nickel, zinc, and lead, respectively, and the adsorption capacities for these ions are 178, 142, 110, 125, and 210 mg g^?1. The amino-functionalized graphene oxide was characterized by thermogravimetric analysis, transmission electron microscopy, scanning electron microscopy, and Fourier transform infrared spectrometry. The proposed method was successfully applied in the analysis of environmental water and food samples. Good spiked recoveries over the range of 95.8–100.0 % were obtained. This work not only proposes a useful method for sample preconcentration but also reveals the great potential of modified graphene as an excellent sorbent material in analytical processes.     

An eco-sustainable green approach for heavy metals management: two case studies of developing industrial region

Multifaceted issues or paradigm of sustainable development should be appropriately addressed in the discipline of environmental management. Pollution of the biosphere with toxic metals has accelerated dramatically since the beginning of the Industrial Revolution. In present review, comparative assessment of traditional chemical technologies and phytoremediation has been reviewed particularly in the context of cost-effectiveness. The potential of phytoremediation and green chemicals in heavy metals management has been described critically. Further, the review explores our work on phytoremediation as green technology during the last 6 years and hand in hand addresses the various ecological issues, benefits and constraints pertaining to heavy metal pollution of aquatic ecosystems and its phytoremediation as first case study. Second case study demonstrates the possible health implications associated with use of metal contaminated wastewater for irrigation in peri-urban areas of developing world. Our researches revealed wetland plants/macrophytes as ideal bio-system for heavy metals removal in terms of both ecology and economy, when compared with chemical treatments. However, there are several constraints or limitations in the use of aquatic plants for phytoremediation in microcosm as well as mesocosm conditions. On the basis of our past researches, an eco-sustainable model has been proposed in order to resolve the certain constraints imposed in two case studies. In relation to future prospect, phytoremediation technology for enhanced heavy metal accumulation is still in embryonic stage and needs more attention in gene manipulation area. Moreover, harvesting and recycling tools needs more extensive research. A multidisciplinary research effort that integrates the work of natural sciences, environmental engineers and policy makers is essential for greater success of green technologies as a potent tool of heavy metals management.     

北京市通州污灌区土壤环境质量监测和蔬菜重金属污染状况研究

通过对北京市通州污灌区土壤现状调查与蔬菜重金属污染监测,结合土壤环境质量标准、食品卫生标准及污灌区污染历史,分析对比该区土壤和蔬菜重金属污染状况及其变化。结果表明,本次监测通州污灌区土壤中重金属平均含量均达到土壤环境质量标准(GB15618-1995)中二级标准限量。对照土壤中的重金属Cu、Pb、Cr、Cd和As均达到土壤一级标准。凉水河两岸和通惠北干渠中重金属含量均高于对照土壤,说明污灌区污水灌溉已使土壤受到一定程度的污染。与二十世纪70年代末监测结果相比,土壤中多数重金属含量处于上升趋势。污灌区蔬菜重金属含量监测结果表明,其含量水平均达到食品卫生标准,说明污灌区蔬菜尚未受到严重污染。     

Dynamics of toxic heavy metals in different compartments of a highly urbanized closed aquatic system

This paper deals with the dynamics of chromium, nickel, copper and lead among the different components namely water, surface sediments, submerged and free floating macrophytes and fish of the twin manmade lakes, Upper and Lower lakes, of Bhopal (M.P., India). Some basic parameters of water and sediment have also been studied. The basin of the lake system is densely populated and the water is used for various purposes including drinking. Ni and Pb along with nitrate in both lakes are significantly higher than the drinking water quality criteria of USEPA. The concentration of the metals in the sediments is noticeably higher than that present in the adjoining rock, particularly Ni and Pb. There is a significant uptake of metals by the macrophytes (Eichhornia crassipes and Hydrilla verticillata) and fish (Labeo rohita and Oreochromis niloticus) mainly in summer. The fish of Lower lake (O. niloticus) is unfit for human consumption. The data have been statistically treated. Principle component analysis and cluster analysis were performed to define the origin of metals and to assess the relationship among the sites. Overall the Lower lake is more polluted than the Upper lake. In aggregate, the lake system is under an environmental stress due to certain practices.     

Status of heavy metals in agricultural soils as affected by different patterns of land use

This study was conducted to determine status of heavy metals in agricultural soils under different patterns of land use. A total of 38, 40 and 45 soil samples for bare vegetable field, greenhouse vegetable field, and grain crop field were respectively taken from surface layer (0–20 cm) from selected experimental areas away from suburbs of ten counties (or districts or cities) in four provinces or municipalities of Huabei plain in north China. Information of crop production history, including varieties, rotation systems and fertilizer use, at the corresponding sampling sites was surveyed. Soil total Cu, Zn, Cd, Pb, Cr, As and Hg were measured. The results showed that the contents of total Cu, Zn, Cd, Pb, Cr, As, and Hg in the soil samples, especially soil total Cu and Zn contents, were higher in the bare vegetable field and the greenhouse vegetable field than that in the grain crop field. Long-term use of excessive chemical fertilizers and organic manures in the bare vegetable field and the greenhouse vegetable field contributed to the accumulation of Cu, Zn, and other heavy metals in the soils. The contents of total Cu, Zn, and other heavy metals in soils increased with increasing vegetable production history of the research areas. In comparison with the grain crop field, the comprehensive pollution indices of the seven soil heavy metals and the single-factor pollution indices of soil Zn, Cu, Cd, Cr, and Hg based on the second criterion of Environmental Quality Standard for Soils were significantly higher in the bare vegetable field and the greenhouse vegetable field. Soils from the greenhouse vegetable field were slightly contaminated according to the comprehensive pollution index, and soils from the bare vegetable field and the grain crop field were at the warning heavy metal pollution level. The soils were contaminated with Cd according to the single-factor pollution index. The Cd pollution was relatively more serious in the bare vegetable field and the greenhouse vegetable field than that in the grain crop field. The soils selected with different land use patterns were not contaminated with Zn, Cu, Pb, Cr, As and Hg.     

Assessment of heavy metals in aquatic sediments

The concentration of heavy metals in the bottom sediment and interstitial water collected from two reservoirs in Singapore was found to be enriched. A distribution coefficient,K _d , was used to assess the chemical stability of heavy metals in the sediments. Numerical models were used to assess (1) the redistribution of heavy metals in a changing environment, and (2) long-term self clean-up capabilities of a reservoir.     

Effect of selected heavy metals on the histopathology of different tissues of earthworm Eudrillus eugeniae

Laboratory-scale experiments were conducted to determine the effect of heavy metals viz. copper (Cu), cadmium (Cd), chromium (Cr), lead (Pb), and zinc (Zn) on the different vital tissues of earthworm Eudrillus eugeniae such as head, gizzard, clitellum, and intestine after the worms were placed in municipal solid waste (MSW) substrate spiked with heavy metals in the concentration range of 0.05 g/kg to 1.0 g/kg of the waste for Cu, Cr, PB, and Zn and 0.05 g/kg for Cd. The experiments were conducted for 100 days with periodic observations and sample collection for investigation after every 10th day. Copper and lead metals were found to cause more deleterious effect in head, gizzard, and intestine. Chromium metal caused cellular damage to the intestinal region. In comparison, cadmium metal severity was more than copper, lead, and chromium metal. Zinc metal did not show deleterious effect on tissues. In general, earthworms can be used as biomarkers in toxicity studies related to heavy metals at cellular levels.     

Environmental exposure to POPs and heavy metals in urban children from Dhaka, Bangladesh

Persistent organic pollutants (POPs) and heavy metals are well known environmental pollutants. Even though numerous studies have been carried out to assess human exposures to these compounds, there is still a lack of data on humans from developing countries, especially in underprivileged children. The objective of this study was to assess the exposure to POPs and heavy metals in children from Dhaka, Bangladesh. One specific aim was to investigate whether children working at, or living close to, open waste disposal sites (WDSs) were more heavily exposed than other urban children. In 2008, blood and serum were collected from 73 children aged 7-16 from five neighbourhoods. Some of the children lived and worked at WDSs (N = 31), others lived next to a WDS (N = 17), whereas some children lived far from such sites (N = 25). Blood levels of lead (B-Pb), cadmium (B-Cd), and selenium (B-Se) were determined by ICP-MS for all subjects. The metal levels were high, with B-Pb overall mean 120 μg L(-1) (range 40-220), B-Cd 0.74 μg L(-1) (0.22-4.1), and B-Se 120 μg L(-1) (81-170). There were no marked differences between children from the different neighbourhoods, or between WDS workers and other children. PCB levels were low and with no contrast between neighbourhoods, for CB-153 the overall mean was 7.0 ng g(-1) fat (2.8-51). In contrast, high levels of DDTs were observed in all children, for 4,4'-DDE 1300 ng g(-1) fat (420-4600), and for 4,4'-DDT 326 ng g(-1) fat (44-1400), indicating ongoing exposure. PBDE levels were low, and BDE-209 was quantitated mainly in children working at or living close to WDSs. In conclusion, the high levels of DDTs, lead and cadmium observed in children from Dhaka are of concern. Many children were exposed at levels where health effects have been observed, or at levels without safety margins.     

Spatial patterns of heavy metals in soil under different geological structures and land uses for assessing metal enrichments

One hundred and thirty composite soil samples were collected from Hamedan county, Iran to characterize the spatial distribution and trace the sources of heavy metals including As, Cd, Co, Cr, Cu, Ni, Pb, V, Zn, and Fe. The multivariate gap statistical analysis was used; for interrelation of spatial patterns of pollution, the disjunctive kriging and geoenrichment factor (EF_G) techniques were applied. Heavy metals and soil properties were grouped using agglomerative hierarchical clustering and gap statistic. Principal component analysis was used for identification of the source of metals in a set of data. Geostatistics was used for the geospatial data processing. Based on the comparison between the original data and background values of the ten metals, the disjunctive kriging and EF_G techniques were used to quantify their geospatial patterns and assess the contamination levels of the heavy metals. The spatial distribution map combined with the statistical analysis showed that the main source of Cr, Co, Ni, Zn, Pb, and V in group A land use (agriculture, rocky, and urban) was geogenic; the origin of As, Cd, and Cu was industrial and agricultural activities (anthropogenic sources). In group B land use (rangeland and orchards), the origin of metals (Cr, Co, Ni, Zn, and V) was mainly controlled by natural factors and As, Cd, Cu, and Pb had been added by organic factors. In group C land use (water), the origin of most heavy metals is natural without anthropogenic sources. The Cd and As pollution was relatively more serious in different land use. The EF_G technique used confirmed the anthropogenic influence of heavy metal pollution. All metals showed concentrations substantially higher than their background values, suggesting anthropogenic pollution.     

Distribution of heavy metals in polluted creek sediment

Sediments affect the water quality substantially. The metal concentrations in sediments often reflect the degree of pollution of the aquatic environment. The sediments of Thane Creek near Bombay were analyzed for nine metals Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn on twenty stations. The average metal concentrations in the sediments were 2.29, 37.25, 39.89, 103.38, 69825.0, 860.15, 105.08, 54.08, and 169.60 g g^-1 dwt respectively. The metal concentrations at certain stations were relatively higher than those of uncontaminated sediments, possibly due to industrial activity in the former area.