Indifference curves as a tool for environment impact assessment

Use of indifference curves, defined as functionality between development index and pollution load to evaluate environmental impact, is proposed. Existing Battelle environmental evaluation methodology is subjective in its approach. The use of indifference curves lends a more objective approach to environment assessment methodology. The extent of environmental damage we are prepared to accept, for a development, can be explained by Willingness to Pay and Willingness to Accept approach. The application of proposed approach has been demonstrated taking an example of Power plant set up in forest area. The curves clearly show that cost of EMP considering mitigation of ecological damage is higher than the EMP mitigating impacts of air and water pollution only. The example stresses the need for willingness to accept along with willingness to pay.     

Environmental impact assessment of a mixed tropical hardwood integrated pulp and paper mill— a case study

An overview of the environmental impact assessment (EIA) for a mixed tropical hardwood integrated pulp and paper mill in Sabah, Malaysia, is presented. The EIA before the mill construction included, among other things, a detailed baseline study and also environmental impact predictions based on certain mill design and pollution abatement measures. Subsequent to mill construction (during the operational stage), data were gathered to determine the quality of the ambient air as well as the effluent and the receiving bay water quality. These post-construction monitoring results were then compared with the earlier impact predictions, and showed, in general, a good correspondence.     

Environmental impact assessment in the association of southeast Asian Nations

The Association of Southeast Asian Nations has agreed that environmental protection and sustainable use of natural resources are essential for sound economic development. The Environmental Impact Assessment is viewed as an important management tool and an ASEAN Experts Group on the Environment has been working for several years on a model especially adapted to the region and also on case studies of the implementation of EIA. Progress so far has been frustratingly slow due to misunderstanding, a lack of ecological data, inadequate trained manpower and institutional shortcomings for compliance. The author advocates collaboration on an ASEAN model for performing EIA as a means of accelerating acceptance and implementation. The concept of Adaptive Environmental Assessment and Management is proposed as a prototype.     

Environmental impact assessment: The work of the OECD

This report describes the work of an international group that is supported in part by the Dutch Ministry for Environment and is chaired by Frans Evers, the Ministry's Deputy Director-General for Environmental Protection.     

Environmental impact of plantations in and around the petroleum refinery: a case study

Plantation or green belt (GB) grown around the factories and industrial premises improves the condition of land, mitigates air pollution (as the plants serve as a sink for pollutants and check the flow of dust, etc.), and reduces the level of noise pollution. The software developed by NEERI for the determination of the optimal width of GB in and around an industry is based on the pollution attenuation coefficient of selected plant species of deciduous trees existing in the region. The assessment of the impact of these plantations/green belts of 500-m width in and around a petroleum refinery in the west coast of India is evaluated for reducing/managing various waste generated, and it is observed that the overall efficiency is more than 60%.     

Environmental impact assessment (EIA): an overlooked instrument for sustainable development in Pakistan

Environmental impact assessment (EIA) is a policy tool used for evaluating a project proposal from physical and socioeconomic environmental perspectives. Its aim is to reduce the impact of development on environment, hence, ensuring environmental sustainability. It is mandatory to submit an Environmental Impact Statement before starting a mega project as required by Environmental Protection Act of 1997 and Environmental Policy of Pakistan. Public consultation plays a key role in an EIA system, identifying the likely aspects and impacts of a development activity. This aspect has been ignored in effective enactment of environmental legislation in Pakistan. Sufficient legislative instruments are there to support EIA system in the country but the agencies responsible for the enforcement of environmental regulations have failed to do so. The current research gives an insight into the actual status of EIA system in Pakistan along with the feedback of EIA specialists and university teachers of the concerned departments. A new index has been devised on the basis of questionnaire response to work out the overall performance of EIA system in Pakistan or any other country. The weaknesses and deficiencies of each EIA stage have been worked out for Pakistan and elaborated with the help of the controversial Zero point Interchange Project in the capital city of Pakistan.     

Environmental impact assessment (EIA) as collaborative learning process

A collaborative problem-solving approach was applied to environmental impact assessment of regional waste management strategy in Pirkanmaa, Finland. Various actors—interest groups, authorities, and experts—were invited to engage in joint fact finding and to exchange their views on the goals of alternative waste management strategies. The experiences of these encounters suggest that collaborative EIA can serve as a learning and civic discovery process where people can act together and find new solutions. During the process, the participants were able to reflect on their preferences and factual beliefs and to create a previously unconsidered waste management strategy that most parties found acceptable. The potential for learning and finding mutually acceptable solutions depended, however, on the legitimacy and institutional settings of the process: to what extent different perspectives were considered in the process, not only included, and how EIA was connected to a political decision-making process.     

Environmental impact assessment in the Philippines: 1977–1985

During 1977 a Philippine environmental impact statement (EIS) system was established and the National Environmental Protection Council (NEPC) was formed to develop environmental policy. Several months after its creation, NEPC was given responsibility to certify that proposed projects met EIS system regulations. With few exceptions, this requirement to gain NEPC's approval was not taken seriously by agencies. The poor record of agency compliance with the EIS system is explained by the absence of ‘controls’ to force thorough assessments. Judicial controls are absent. Procedural and evaluative controls are in place, but NEPC has neither the budget nor the political power to enforce them. Although the national EIS system is ineffective, agencies sometimes conduct informal, ad hoc environmental assessments in response to instrumental controls exercised by international funding organizations, professional controls exerted by planners, and public controls brought about by individuals and groups who would be adversely affected by projects.     

Equity-focused health impact assessment: A tool to assist policy makers in addressing health inequalities

In Australasia (Australia and New Zealand) the use of health impact assessment (HIA) as a tool for improved policy development is comparatively new. The public health workforce do not routinely assess the potential health and equity impacts of proposed policies or programs. The Australasian Collaboration for Health Equity Impact Assessment was funded to develop a strategic framework for equity-focused HIA (EFHIA) with the intent of strengthening the ways in which equity is addressed in each step of HIA. The collaboration developed a draft framework for EFHIA that mirrored, but modified the commonly accepted steps of HIA; tested the draft framework in six different health service delivery settings; analysed the feedback about application of the draft EFHIA framework and modified it accordingly. The strategic framework shows promise in providing a systematic process for identifying potential differential health impacts and assessing the extent to which these are avoidable and unfair. This paper presents the EFHIA framework and discusses some of the issues that arose in the case study sites undertaking equity-focused HIA.     

Fuzzy clustering analysis in environmental impact assessment — A complement tool to environmental quality index

In spite of rapid progress achieved in the methodological research underlying environmental impact assessment (EIA), the problem of weighting various parameters has not yet been solved. This paper presents a new approach, fuzzy clustering analysis, which is illustrated with an EIA case study on Baoshan-Wusong District in Shanghai, China. Fuzzy clustering analysis may be used whenever a composite classification of environmental quality/impact incorporates multiple parameters. In such cases the technique may be used as a complement or an alternative to comprehensive assessment. In fuzzy clustering analysis, the classification is determined by a fuzzy relation. After a fuzzy similarity matrix has been established and the fuzzy relation stabilized, a dynamic clustering chart can be developed. Given a suitable threshold, the appropriate classification can be accomplished. The methodology is relatively simple and the results can be interpreted to provide valuable information to support decision making and improve management of the environment.     

Evaluation of a gradient sampling design for environmental impact assessment

Before-After Control Impact (BACI) sampling designsare commonly used in environmental impact assessmentand are considered the most effective for detectingchanges due to anthropogenic disturbances. Thesedesigns handle local spatial variability throughrandomized placement of samples into a treatmentstratum and a control stratum. When a contaminantdisperses with distance from a point source it issuggested that a gradient design will be moresensitive to change than randomized placement ofsamples. This requires allocating samples according todistance, rather than by random placement withinrandomly placed blocks. In this paper gradient versusrandom sampling designs were compared using data froman oil field in the North Sea. The gradient samplingdesign was more powerful than a randomized CI sampling design.     

The terrain signatures of administrative units: a tool for environmental assessment

The quantification of knowledge related to the terrain and the landuse/landcover of administrative units in Southern Greece (Peloponnesus) is performed from the CGIAR-CSI SRTM digital elevation model and the CORINE landuse/landcover database. Each administrative unit is parametrically represented by a set of attributes related to its relief. Administrative units are classified on the basis of K-means cluster analysis in an attempt to see how they are organized into groups and cluster derived geometric signatures are defined. Finally each cluster is parametrically represented on the basis of the occurrence of the Corine landuse/landcover classes included and thus, landcover signatures are derived. The geometric and the landuse/landcover signatures revealed a terrain dependent landuse/landcover organization that was used in the assessment of the forest fires impact at moderate resolution scale.     

Environmental impact assessment of Attenda abattoir, Ogbomoso southwestern Nigeria on surface and groundwater quality using geo-electrical imaging and microbiological analysis

The impact of Attenda abattoir, Ogbomoso southwestern Nigeria on four water sources was investigated using geoelectrical imaging and microbiological analysis. 2D electrical resistivity imaging indicated groundwater contamination by leachate from the abattoir. Electrical resistivity values measured by the traverse run directly on the waste dump and other areas impacted by the waste from the abattoir are generally very low (6.68-16.7 ?m) in comparison to other positions (135-288 ?m). The total viable bacteria count of the water samples ranged from 0.49 × 10(6) to 2.85 × 10(8) cfu/ml and all samples are contaminated with coliforms with the most probable number (MPN)/100 ml ranging from 110 to ≥ 1,600 MPN/100 ml. Among bacteria isolated from the study site (n = 95), resistance to eight antibiotics ranged from 35.8% to 94%. In addition, 85% of Streptococcus agalactiae (n = 31) and Staphylococci (n = 9) showed haemolytic activity while 92% of all isolates showed β-lactamase activity. These results suggest that operations of the abattoir may impact negatively on surrounding aquatic ecosystem and endanger the health of surrounding residents who use water from the wells for domestic purposes. Furthermore, such aquatic ecosystems may serve as reservoir of antibiotic resistant bacteria.