PBDF and PBDD from the combustion of bromine containing flame retarded polymers: A survey

The formation of polybrominated dibenzofurans (PBDF) and dibenzodioxins (PBDD) during the pyrolysis of different polymers containing brominated organic flame retardants was investigated. The pyrolyses were conducted at two different temperatures (600°C and 800°C) using three different oven configurations. Both the pyrolysis gases and the solid residues were analysed for PBDF and PBDD.

PBDF were found in almost all samples, but both the concentration and the degree of bromination varied greatly. The largest yields of PBDF in the percent range were measured in the pyrolysis products of polymers containing brominated diphenyl ethers. The other flame retardants generally yielded only a few ppm of PBDF. PBDD are formed only in a few samples and related to the PBDF in very low concentrations.     

Pyrolysis and GC/MS-analysis of brominated flame retardants in on-line operation

Flame retardants such as brominated diphenyl ethers (Bromkal 70-5-DE, FR 300 BA), 2,4,6-tribromophenol, pentabromophenol and hexabromobiphenyl were pyrolyzed at 600°C, 700°C, 800°C and 900°C in absence of oxygen in a SGE pyrojector, and the residues were analyzed by means of GC/MS in on-line operation. The pyrolysis of Bromkal 70-5-DE hereby yielded bromobenzenes (PBBz), bromophenols (PBP) and brominated dibenzofurans (PBDF). PBBz, bromonaphthalenes (PBN) and PBDF could be detected in the FR 300 BA pyrolysate, whereas brominated benzenes and dibenzodioxins formed during the pyrolysis of 2,4,6-tribromophenol. Unlike the pyrolysis of 2,4,6-tribromophenol, pentabromophenol pyrolysis produced mainly bromobenzenes along with traces of bromonaphthalenes, bromodioxins and bromodiphenyl ethers. The pyrogram of hexabromobiphenyl showed bromobenzenes and brominated biphenyls as key pyrolysate components.     

Simultaneous sampling of PCDD/PCDF inside the combustion chamber and on four boiler levels of a waste incineration plant

At a MSWI (municipal solid waste incinerator) plant PCDD/PCDF samples (gasphase and particulates) were taken simultaneously be a shock-freezing method in the incinerator combustion chamber at approx. 800°C and in four sampling sections in the boiler at about 490°C, 370°C, 330°C and 270°C. In this way PCDD/PCDF-formation in the flow through the boiler was determined. Two data sets were evaluated. A considerable PCDD/PCDF-formation had occurred already at boiler temperatures of about 490°C; the highest concentration, however, was found at the end of the boiler at about 300°C. The accompanying measuring program of plant parameters made the calculation of the PCDD/PCDF mass flows possible, which allowed the inclusion of the PCDD/PCDF-content in the ESP dust in the mass flow calculations.     

Emissions of organophosphate and brominated flame retardants from selected consumer products and building materials

The emissions of selected flame retardants were measured in 1- and 0.02-m³ emission test chambers and 0.001-m³ emission test cells. Four product groups were of interest: insulating materials, assembly foam, upholstery/mattresses, and electronics equipment. The experiments were performed under constant environmental conditions (23°C, 50% RH) using a fixed sample surface area and controlled air flow rates. Tris (2-chloro-isopropyl)phosphate (TCPP) was observed to be one of the most commonly emitted organophosphate flame retardants in polyurethane foam applications. Depending on the sample type, area-specific emission rates (SER_a) of TCPP varied between 20 ng m⁻² h⁻¹ and 140 μg m⁻² h⁻¹.The emissions from electronic devices were measured at 60°C to simulate operating conditions. Under these conditions, unit specific emission rates (SER_u) of organophosphates were determined to be 10–85 ng unit⁻¹ h⁻¹. Increasing the temperature increased the emission of several flame retardants by up to a factor of 500. The results presented in this paper indicate that emissions of several brominated and organophosphate flame retardants are measurable. Polybrominated diphenylethers exhibited an SER_a of between 0.2 and 6.6 ng m⁻² h⁻¹ and an SER_u of between 0.6 and 14.2 ng unit⁻¹ h⁻¹. Because of sink effects, i.e., sorption to chamber components, the emission test chambers and cells used in this study have limited utility for substances low vapour pressures, especially the highly brominated compounds; hexabromocyclododecane had an SER_a of between 0.1 and 29 ng m⁻² h⁻¹ and decabromodiphenylether was not detectable at all.     

Method optimization to measure polybrominated diphenyl ether (PBDE) concentrations in soils of Bratislava, Slovakia

We modified an analytical method to determine polybrominated diphenyl ethers (PBDEs) in urban soils of Bratislava (Slovakia). Gel permeation chromatography (GPC) introduced as a clean-up step for soil extracts substantially reduced matrix enhancements when PBDEs were measured with gas chromatography-negative chemical ionization-mass spectrometry (GC-NCI-MS). The resulting method proved to be accurate, precise, and showed low detection limits. The sum of 15 PBDE concentrations in surface horizons of Bratislava soils ranged from 87 to 627 pg g⁻¹. PBDE concentrations were mostly higher in surface than deeper horizons probably because of atmospheric deposition and lack of substantial vertical transport. Lower brominated PBDEs undergo more soil-atmosphere exchanges or are more scavenged and transferred with litter fall to the soil organic matter than higher brominated ones as suggested by the correlation between lower brominated PBDEs and soil organic C (C_org) concentrations.     

Solubility enhancement of seven metal contaminants using carboxymethyl-β-cyclodextrin (CMCD)

Carboxymethyl-β-cyclodextrin (CMCD) has been suggested as a complexing agent for remediation of sites co-contaminated with metals and organic pollutants. As part of an attempt to construct a geochemical complexation model for metal-CMCD interactions, conditional formation constants for the complexes between CMCD and 7 metal ions (Ba, Ca, Cd, Ni, Pb, Sr, and Zn) are estimated from experimental data. Stable metal concentrations were reached after approximately 1 day and estimated logarithmic conditional formation constants range from − 3.2 to − 5.1 with confidence intervals within ± 0.08 log units. Experiments performed at 10 °C and 25 °C show that temperature affects the solubility of the metal salts but the strength of CMCD-metal complexes are not affected by this temperature variation. The conditional stability constants and complexation model presented in this work can be used to screen CMCD as a potential remediation agent for clean-up of contaminated soil and groundwater.     

Surface-mediated formation of PBDD/Fs from the high-temperature oxidation of 2-bromophenol on a CuO/silica surface

As a model brominated hydrocarbon that may form brominated dioxins, we studied the surface-mediated, oxidative thermal degradation of 2-bromophenol on a supported copper oxide catalyst in a 1 mm i.d., fused silica flow reactor at a constant concentration of 90 ppm over a temperature range from 250 to 550 degrees C. Observed products included: dibenzo-p-dioxin (DD), 1-monobromodibenzo-p-dioxin (1-MBDD), dibromodibenzo-p-dioxin (DBDD), tribromodibenzo-p-dioxin (TrBDD), 4-monobromodibenzofuran (4-MBDF), 2,4,6-tribromophenol, 2,4- and 2,6-dibromophenol, and polybrominated benzenes. The results are compared and contrasted with previous work on surface catalyzed oxidative thermal degradation of 2-chlorophenol as well as our own work with the surface-catalyzed pyrolytic thermal degradation of 2-bromophenol. Typically 20 to 200x higher yields of PBDDs are observed for 2-bromophenol than for the analogous PCDDs for 2-chlorophenol. However the anticipated PBDF, 4,6-DBDF, was not observed and 4-MBDF was observed at very low yields. Surprisingly, the maximum yields of PBDDs were observed at higher temperatures than under pyrolytic conditions. This is attributed to regeneration of the catalytic surface due to the presence of oxygen. Higher yields of polybrominated phenols and polybrominated benzenes were also observed than for the analogous chlorinated phenols and benzenes from the oxidation of 2-chlorophenol. This can be attributed to the ease of bromination over chlorination based on the higher abundance of bromine atoms present for 2-bromophenol than chlorine atoms present for 2-chlorophenol.     

Thermal formation of PBDD/F from tetrabromobisphenol A--a comparison of polymer linked TBBP A with its additive incorporation in thermoplastics

For a long period, polybrominated flame retardants are under discussion because of the formation of polybrominated dibenzo-p-dioxins (PBDD)/dibenzofurans (PBDF) (PBDD/F) in case of thermal stress. Concerning polymer linked tetrabromobisphenol A (TBBP A), formation of PBDD/F was commonly presumed to be sterically hindered because of the covalent fixation into the polymer backbone. Combustion experiments with additively incorporated TBBP A compared with its polymer linkage revealed, that this assumption is incorrect and has to be revised. Under same conditions, similar PBDD/F concentrations in the range of 17.5-19.6 mg PBBD/F per kg TBBP A applied were analyzed. PBDD/F homologue distribution patterns were almost identical predominated by low brominated PBDF. These findings for PBDD/F formation have to be considered in future discussions regarding thermal stress caused by combustion or recycling processes, including other flame retardants bound in polymer matrix, e.g. polybrominated polystyrene (PS), or those with molecular structures showing less analogy to PBDD/F, like hexabromocyclododecane. The second aspect introduced, is the influence of different plastics on the formation rates of PBDD/F. In this context, combustion experiments were performed in an atmosphere consisting of synthetic air and HBr. PBDD/F concentrations were 8.47 mg/kg polyethylene, 1.67 mg/kg PS, 3.92 mg/kg phenolic resin and 18.1 mg/kg epoxy resin. Distribution patterns of PBDD/F homologues could partly be correlated with the occurrence of the precursors polybrominated benzenes and phenols.     

Bioaccumulation, maternal transfer and elimination of polybrominated diphenyl ethers in wild frogs

To investigate bioaccumulation, maternal transfer and elimination of polybrominated diphenyl ethers (PBDEs) in amphibians, we collected adult frogs (Rana limnocharis) from a rice field in an e-waste recycling site in China. We found that ∑PBDEs in the whole frogs and various tissues (brain, liver, testis and egg) ranged from 17.10 to 141.11 ng g⁻¹ wet weight. Various tissues exhibited a similar PBDE congener profile, which was characterized by intermediate brominated congeners (BDE-99 and BDE-153) as the largest contributors, with less lower brominated congeners (BDE-28 and BDE-47) and higher brominated congeners (BDE-209). The maternal transfer capacity of PBDEs declined with the increase in bromine numbers of PBDE congeners. We suggest that the bromine atom number (the molecular size, to some degree) might be a determining factor for the maternal transport of a PBDE congener rather than K_ow (Octanol-Water partition coefficient), which expresses a compound’s lipophilicity. ∑PBDEs concentrations in frogs decreased over time during a depuration period of 54 days when these wild frogs were brought to the lab from the e-waste recycling site. The half-life of ∑PBDEs was 35 days, with about 14 days for BDE-47, and 36 and 81 days for BDE-99 and BDE-153, respectively. The data shows that the elimination of PBDEs has no essential difference from aquatic and terrestrial species.     

Zero valent iron remediation of a mixed brominated ethene contaminated groundwater

The suitability of a granulated zero valent iron (ZVI) permeable reactive barrier (PRB) remediation strategy was investigated for tribromoethene (TriBE), cis-1,2-dibromoethene (c-DBE), trans-1,2-dibromoethene (t-DBE) and vinyl bromide (VB), via batch and large-scale column experiments that were subsequently analysed by reactive transport modelling.The brominated ethenes in both batch and large-scale column experiments showed rapid (compared to controls and natural attenuation) degradation in the presence of ZVI. In the large-scale column experiment, degradation half-lives were 0.35 days for TriBE, 0.50 days for c-DBE, 0.31 days for t-DBE and 0.40 days for VB, under site groundwater flow conditions, resulting in removal of brominated ethenes within the first 0.2 m of a 1.0 m thick ZVI layer, indicating that a PRB groundwater remediation strategy using ZVI could be used successfully.In the model simulations of the ZVI induced brominated ethene degradation, assuming a dominant reductive β-elimination pathway via bromoacetylene and acetylene production, simulated organic compound concentrations corresponded well with both batch and large-scale column experimental data. Changes of inorganic reactants were also well captured by the simulations. The similar ZVI induced degradation pathway of TriBE and TCE suggests that outcomes from research on ZVI induced TCE remediation could also be applied to TriBE remediation.     

Quaternary stratigraphy, sediment characteristics and geochemistry of arsenic-contaminated alluvial aquifers in the Ganges–Brahmaputra floodplain in central Bangladesh

This study focuses on the Quaternary stratigraphy, sediment composition, mineralogy, and geochemistry of arsenic (As)-contaminated alluvial aquifers in the Ganges–Brahmaputra floodplain in the central Bangladesh. Arsenic concentrations in 85 tubewells in Manikganj area, 70 km northwest of Dhaka City, range from 0.25 µg/L to 191 µg/L with a mean concentration of 33 µg/L. Groundwater is mainly Ca–HCO₃ type with high concentrations of dissolved As, Fe, and Mn, but low level of SO₄. The uppermost aquifer occurs between 10 m and 80 m below the surface that has a mean arsenic concentration of 35 µg/L. Deeper aquifer (> 100 m depth) has a mean arsenic concentration of 18 µg/L. Sediments in the upper aquifer are mostly gray to dark-gray, whereas sediments in the deep aquifer are mostly yellowing-gray to brown. Quartz, feldspar, mica, hornblende, garnet, kyanite, tourmaline, magnetite, ilmenite are the major minerals in sediments from both aquifers. Biotite and potassium feldspar are dominant in shallow aquifer, although plagioclase feldspar and garnet are abundant in deep aquifer sediments. Sediment composition suggests a mixed provenance with sediment supplies from both orogenic belts and cratons. High arsenic concentrations in sediments are found within the upper 50 m in drilled core samples. Statistical analysis shows that As, Fe, Mn, Ca, and P are strongly correlated in sediments. Concentrations of Cd, Cu, Ni, Zn, and Bi also show strong correlations with arsenic in the Manikganj sediment cores. Authigenic goethite concretions, possibly formed by bacteria, are found in the shallow sediments, which contain arsenic of a concentration as high as 8.8 mg/kg. High arsenic concentrations in aquifers are associated with fine-grained sediments that were derived mostly from the recycled orogens and relatively rapidly deposited mainly by meandering channels during the Early to Middle Holocene rising sea-level conditions.     

Contamination and potential sources of polybrominated diphenyl ethers (PBDEs) in water and sediment from the artificial Lake Shihwa, Korea

Concentrations of polybrominated diphenyl ethers (PBDEs) were determined in water and sediment collected from the artificial Lake Shihwa and surrounding creeks. Total concentrations of 23 PBDE congeners in water and sediment ranged from 0.16 to 11.0 ng L⁻¹ and from 1.3 to 18 700 ng g⁻¹ dry weight, respectively. The concentrations of BDE 209 in water and sediment were 1-2 orders of magnitude higher than the total concentrations of other PBDE congeners. The concentrations of total PBDEs and BDE 209 in sediments were the highest compared to previously reported worldwide levels. The highest concentrations of PBDEs in water and sediments were found in creeks near industrial complexes. The PBDE concentrations gradually decreased with increasing distance from the creeks to the inshore and then offshore regions of the lake. BDE 209 was a major congener, accounting for 80% of the total PBDEs in water and sediment, consistent with a high consumption of deca-BDE for the brominated flame retardant market in Korea. Non-parametric multidimensional scaling ordination showed that surrounding creeks are major pathways of PBDE contamination associated with deca-BDE technical mixtures used in industrial complexes around Lake Shihwa. A significant correlation between total organic carbon and total PBDE concentration was found in sediments, and the correlation coefficients for individual PBDE congeners relatively increased from lower to higher brominated congeners.     

An aerosol flow tube study of the interaction of N2O5 with calcite, Arizona dust and quartz

The interaction of N₂O₅ with dispersed samples of Arizona Test Dust (ATD), Calcite (CaCO₃) and quartz (SiO₂) was investigated at varying relative humidity using an aerosol flow reactor. Reactive uptake coefficients, γ, obtained at close to zero relative humidity were (4.8 ± 0.7) × 10⁻³ for CaCO₃, (8.6 ± 0.6) × 10⁻³ for Quartz and (9.8 ± 1.0) × 10⁻³ for ATD. In the case of calcite, evidence was obtained for an enhanced rate of uptake at relative humidities above ≈ 50%. The results are compared to literature values obtained using bulk substrates and to previous aerosol uptake data on Saharan dust.     

Persistent organic pollutants (POPs) in human milk: A biomonitoring study in rural areas of Flanders (Belgium)

To collect information on the concentrations of persistent organic pollutants (POPs) in the rural areas in Flanders (Belgium), 84 breastfeeding mothers were recruited in rural communities in East and West Flanders and Flemish Brabant in 2009-2010. Polychlorinated biphenyl (PCB) congeners, organochlorine pesticides, brominated flame retardants, perfluorinated compounds, polychlorinated dibenzodioxines and dibenzofurans, and dioxin-like PCBs were measured in individual milk samples and in a pooled milk sample, while some additional pollutants were only measured in the pooled sample. For most pollutants, the concentrations in this study were lower or comparable to the concentrations measured in the pooled Belgian sample of the WHO human milk study of 2006, except for the pesticides dichlorodiphenyltrichloroethane DDT (+25% for ΣDDT and metabolites) and trans-nonachlor (+94%), and for the brominated flame retardant hexachlorocyclododecane HBCD (+153%). Perfluorinated compounds were for the first time determined in human milk samples from Belgium and the concentrations were comparable to those from other European countries. Also, interesting associations were found between the concentrations of POPs measured in human milk and personal characteristics as well as dietary habits of the study population. PFOS en PFOA concentrations were significantly higher in milk of primiparous participants compared to mothers who gave birth to their second child. Lower brominated PBDE congeners increased with increasing BMI of the mothers (p = 0.01 for BDE 47, p = 0.02 for BDE 99 and p = 0.02 for BDE 100). Participants consuming milk or dairy products daily had significant higher concentrations of ΣDDTs (p = 0.03) and oxychlordane (p = 0.047) in their human milk samples.     

Freezing of a clayey silt contaminated with an organic solvent

In a study of water migration characteristics and organic contaminant transfer mechanisms in a freezing fine-grained saturated soil, a series of one-dimensional freezing tests were conducted on a clayey silt contaminated with a miscible, non-reactive organic compound, 1-propanol, at various concentrations. The experimental results indicate that the frost heave behaviour and solute rejection mechanisms of a soil contaminated with 1-propanol is similar to that of the same soil contaminated with sodium-chloride salt. It was found that 1-propanol is rejected from the pore for rates of cooling smaller than 4 ± 1°C/day. Diffusion appears to control contaminant redistribution in the unfrozen soil. Finally, there has been no contaminant redistribution in the frozen soil for periods up to 245 hours.     

Variability of tropospheric hydroperoxides at a coastal surface site in Antarctica

The annual cycles of hydrogen peroxide (H₂O₂) and methylhydroperoxide (MHP) have been investigated at a remote site in Antarctica in order to study seasonal variations as well as chemical processes in the troposphere. The measurements have been performed from March 1997 to January 1998 and in February 1999 at the German Antarctic research station Neumayer which is located at 70°39′S, 8°15′W. The obtained time series for hydrogen peroxide and methylhydroperoxide in near-surface air represents the first all-year measurements in Antarctica and indicates clearly the occurrence of seasonal variations. During polar night mean values of 0.054±0.046 ppbv (range<0.03–0.11 ppbv) for hydrogen peroxide and 0.089±0.052 ppbv (range<0.05–0.14 ppbv) for methylhydroperoxide were detected. At the sunlit period higher Mixing ratios were found, 0.20±0.13 ppbv (range<0.03–0.91 ppbv) for hydrogen peroxide and 0.19±0.10 ppbv (range<0.05–0.89 ppbv) for methylhydroperoxide. Occasional long-range transport of air masses from mid-latitudes caused enhanced peroxide concentrations at polar night. During the period of stratospheric ozone depletion we observed peroxide mixing ratios comparable to typical winter levels.     

Polybrominated diphenyl ethers in various atmospheric environments of Taiwan: their levels, source identification and influence of combustion sources

In this study, ambient air samples from different atmospheric environments were examined for both PBDE and PCDD/F characteristics to verify that combustion is a significant PBDE emission source. The mean ± SD atmospheric PBDE concentrations were 165 ± 65.0 pg Nm⁻³ in the heavy steel complex area and 93.9 ± 24.5 pg Nm⁻³ in the metals complex areas, 4.7 and 2.7 times higher than that (35.3 ± 15.5 pg Nm⁻³) in the urban areas, respectively. The statistically high correlation (r = 0.871, p < 0.001) found between the atmospheric PBDE and PCDD/F concentrations reveals that the combustion sources are the most likely PBDE emission sources. Correspondence analysis shows the atmospheric PBDEs of the heavy steel and metals complex areas are associated with BDE-209, -203, -207, -208, indicative of combustion source contributions. Furthermore, the PBDEs in urban ambient air experience the influence of the evaporative releases of the commercial penta- and octa-BDE mixtures, as well as combustion source emissions. By comparing the PBDE homologues of indoor air, urban ambient air, and stack flue gases of combustion sources, we found that the lighter brominated PBDEs in urban ambient air were contributed by the indoor air, while their highly brominated ones were from the combustion sources, such as vehicles. The developed source identification measure can be used to clarify possible PBDE sources not only for Taiwanese atmosphere but also for other environmental media in other countries associated with various emission sources in the future.     

Estimating bulk optical properties of aerosols over the western North Pacific by using MODIS and CERES measurements

Over the western North Pacific, a large amount of land aerosols from Asian-Pacific countries is transported by the prevailing westerlies. This transport makes the radiative characteristics of these aerosols diverse, particularly when one compares those characteristics over the coastal sea with those over the open sea. In this paper we discuss a method that uses satellite data to obtain the single-scattering albedo (ω) and asymmetry factor (g) of atmospheric aerosols for two large-scale subdivisions—the coastal sea (within 250 km from the coast) and the open sea (the remaining area)—over the western North Pacific (110°E–180°, 20°N–50°N). Our estimation method uses satellite measurements, obtained over a six-year period (2000–2005), of aerosol optical depth (AOD) and shortwave fluxes at both the surface and the top of the atmosphere (TOA); the measurements are obtained using the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Clouds and the Earth's Radiant Energy System (CERES). For the two subdivisions, the estimated annual means of (ω,g) at 630 nm are significantly different: (0.94, 0.65) over the coastal sea and (0.97, 0.70) over the open sea. From a quantitative viewpoint, this result indicates that in comparison with aerosols over the open sea, those over the coastal sea show greater absorption and lesser forward scattering of solar radiation. The estimated optical properties are responsible for the aerosol surface cooling observed by MODIS and CERES, which is approximately 138 and 108 W m⁻² per AOD over the coastal sea and open sea, respectively.     

Bioaccumulation of polybrominated diphenyl ethers in harbor seals from the northwest Atlantic

Polybrominated diphenyl ethers (PBDEs) were analyzed in blubber of harbor seals (Phoca vitulina concolor) collected between 1991 and 2005 along the northwest Atlantic. ∑PBDE concentrations (mono- to hexa-BDEs) detected in blubber samples (n = 42) ranged from 80 to 25 720 ng g⁻¹ lw, (overall mean 2403 ± 5406 ng g⁻¹ lw). By age, mean ∑PBDE concentrations were: 3645 ± 7388, 2945 ± 5995, 1385 ± 1265, and 326 ± 193 ng g⁻¹ lw in pups, yearlings, adult males, and adult females, respectively. Unlike the trend for PCBs, no decreasing gradient from urban to rural/remote areas was observed for PBDEs in these samples, likely reflecting inputs from local sources. No significant temporal trend was observed for PBDEs in harbor seals between 1991 and 2005, although congener profiles shifted over time. Tetra-BDE-47 was the dominant congener, followed by BDEs-99, -100, -153, -154, and -155 in varying order, suggesting exposure to the penta-BDE product. In adult males, the hexa-BDEs contributed more to the total (22%) than BDEs-99 and -100 (14%), and concentrations of BDE-155 were elevated compared with -154. Higher BDEs were detected in a subset of seals (n = 12) including hepta-BDE-183, the marker for the octa-BDE mixture, and octa-BDE-197, along with several unidentified hepta- and octa- congeners. BDE-209 was detected in seal blubber at concentrations ranging from 1.1 to 8 ng g⁻¹ lw, indicating that deca-BDE is bioavailable in this marine food web. This is the first study to document the accumulation of BDE-209 at measurable levels in wild harbor seals. While the PBDE patterns in blubber indicate exposure to all three BDE commercial mixtures, the data also suggest that BDE-209 debromination by seal prey fish may contribute to the loading of lower brominated congeners (hexa- to octa-BDEs) in these seals.