A kinetic mechanism for predicting secondary organic aerosol formation from toluene oxidation in the presence of NOx and natural sunlight

A kinetic mechanism to predict secondary organic aerosol (SOA) formation from the photo-oxidation of toluene was developed. Aerosol phase chemistry that includes nucleation, gas–particle partitioning and particle-phase reactions as well as the gas-phase chemistry of toluene and its degradation products were represented. The mechanism was evaluated against experimental data obtained from the University of North Carolina (UNC) 270 m³ dual outdoor aerosol smog chamber facility. The model adequately simulates the decay of toluene, the nitric oxide (NO) to nitrogen dioxide (NO₂) conversion and ozone formation. It also provides a reasonable prediction of SOA production under different conditions that range from 15 to 300 μg m⁻³. Speciation of simulated aerosol material shows that up to 70% of the aerosol mass comes from oligomers and polymers depending on initial reactant concentrations. The dominant particle-phase species predicted by the mechanism are glyoxal oligomers, ketene oligomers from the photolysis of the toluene OH reaction product 2-methyl-2,4-hexadienedial, organic nitrates, methyl nitro-phenol analogues, C7 organic peroxides, acylperoxy nitrates and for the low-concentration experiments, unsaturated hydroxy nitro acids.     

Secondary organic aerosol formation from the oxidation of aromatic hydrocarbons in the presence of dry submicron ammonium sulfate aerosol

A laboratory study was conducted to examine formation of secondary organic aerosols. A smog chamber system was developed for studying gas–aerosol interactions in a dynamic flow reactor. These experiments were conducted to investigate the fate of gas and aerosol phase compounds generated from hydrocarbon–nitrogen oxide (HC/NO_x) mixtures irradiated in the presence of fine (<2.5 μm) particulate matter. The goal was to determine to what extent photochemical oxidation products of aromatic hydrocarbons contribute to secondary organic aerosol formation through uptake on pre-existing inorganic aerosols in the absence of liquid water films. Irradiations were conducted with toluene, p-xylene, and 1,3,5-trimethylbenzene in the presence of NO_x and ammonium sulfate aerosol, with propylene added to enhance the production of radicals in the system. The secondary organic aerosol yields were determined by dividing the mass concentration of organic fraction of the aerosol collected on quartz filters by the mass concentration of the aromatic hydrocarbon removed by reaction. The mass concentration of the organic fraction was obtained by multiplying the measured organic carbon concentration by 2.0, a correction factor that takes into account the presence of hydrogen, nitrogen, and oxygen atoms in the organic species. The mass concentrations of ammonium, nitrate, and sulfate concentrations as well as the total mass of the aerosols were measured. A reasonable mass balance was found for each of the aerosols. The largest secondary organic aerosol yield of 1.59±0.40% was found for toluene at an organic aerosol concentration of 8.2 μm⁻³, followed by 1.09±0.27% for p-xylene at 6.4 μg m⁻³, and 0.41±0.10% for 1,3,5-trimethylbenzene at 2.0 μg m⁻³. In general, these results agree with those reported by Odum et al. and appear to be consistent with the gas–aerosol partitioning theory developed by Pankow. The presence of organic in the aerosol did not affect significantly the hygroscopic properties of the aerosol.     

Gas-phase absorption cross sections of 24 monocyclic aromatic hydrocarbons in the UV and IR spectral ranges

Absorption cross sections of 24 volatile and non-volatile derivatives of benzene in the ultraviolet (UV) and the infrared (IR) regions of the electromagnetic spectrum have been determined using a 1080 l quartz cell. For the UV a 0.5 m Czerny-Turner spectrometer coupled with a photodiode array detector (spectral resolution 0.15 nm) was used. IR spectra were recorded with an FT-IR spectrometer (Bruker IFS-88, spectral resolution 1 cm^-1). Absolute absorption cross sections and the instrument function are given for the UV, while for the IR, absorption cross sections and integrated band intensities are reported.The study focused primarily on the atmospherically relevant methylated benzenes (benzene, toluene, o-xylene, m-xylene, p-xylene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, ethylbenzene, styrene) and their ring retaining oxidation products (benzaldehyde, o-tolualdehyde, m-tolualdehyde, p-tolualdehyde, phenol, o-cresol, m-cresol, p-cresol, 2,3-dimethylphenol, 2,4-dimethylphenol, 2,5-dimethylphenol, 2,6-dimethylphenol, 3,4-dimethylphenol, 3,5-dimethylphenol, 2,4,6-trimethylphenol and (E,Z)- and (E,E)-2,4-hexadienedial).The UV absorption cross sections reported here can be used for the evaluation of DOAS spectra (Differential Optical Absorption Spectroscopy) for measurements of the above compounds in the atmosphere and in reaction chambers, while the IR absorption cross sections will primarily be useful in laboratory studies on atmospheric chemistry, where FT-IR spectrometry is an important tool.     

Aerosol formation yields from the reaction of catechol with ozone

The formation of secondary organic aerosol from the gas-phase reaction of catechol (1,2-dihydroxybenzene) with ozone has been studied in two smog chambers. Aerosol production was monitored using a scanning mobility particle sizer and loss of the precursor was determined by gas chromatography and infrared spectroscopy, whilst ozone concentrations were measured using a UV photometric analyzer. The overall organic aerosol yield (Y) was determined as the ratio of the suspended aerosol mass corrected for wall losses (M_o) to the total reacted catechol concentrations, assuming a particle density of 1.4 g cm^?3. Analysis of the data clearly shows that Y is a strong function of M_o and that secondary organic aerosol formation can be expressed by a one-product gas–particle partitioning absorption model. The aerosol formation is affected by the initial catechol concentration, which leads to aerosol yields ranging from 17% to 86%. The results of this work are compared to similar studies reported in the literature.     

Roadside BTEX and other gaseous air pollutants in relation to emission sources

Hourly concentrations of benzene, toluene, ethylbenzene, m,p-xylenes, and o-xylene (BTEX) plus CO, NO_x, SO₂ were monitored at roadsides simultaneously with the traffic volume during the dry season of 2004, in Hanoi, Vietnam. The selected three streets included Truong Chinh (TC) with high traffic volume, Dien Bien Phu (DBP) with low traffic volume, and Nguyen Trai (NT) with high traffic volume running through an industrial estate. BTEX were sampled by SKC charcoal tubes and analyzed by GC–FID. Geometric means of hourly benzene, toluene, ethylbenzene, m,p-xylenes and o-xylene are, respectively, 65, 62, 15, 43, and 22 μg m⁻³ in TC street; 30, 38, 9, 26, and 13 μg m⁻³ in DBP street; and 123, 87, 24, 56, and 30 μg m⁻³ in NT street. Levels of other gaseous pollutants including CO, NO_x, and SO₂, measured by automatic instruments, were low and not exceeding the Vietnam national ambient air quality standards. BTEX levels were comparatively analyzed for different downwind distances (3–50 m) from the street, between peak hours and off-peak hours, as well as between weekdays and weekend. Results of principal component analysis suggest that the gaseous pollutants are associated with different vehicle types.     

Unsaturated dicarbonyl products from the OH-initiated photo-oxidation of furan, 2-methylfuran and 3-methylfuran

This study presents the application of O-(2,3,4,5,6)-pentafluorobenzyl-hydroxylamine hydrochloride (PFBHA) on-fibre derivatisation Solid Phase Microextraction (SPME) to the sampling and quantification of the unsaturated 1,4-dicarbonyl products obtained in the photo-oxidation of furan, 2-methylfuran and 3-methylfuran with HONO: butenedial, 4-oxo-2-pentenal and 2-methylbutenedial, respectively. The use of Proton Transfer Reaction Mass Spectrometry (PTR-MS) is also considered and the advantages of the combined use of both methodologies is discussed. The 1,4 unsaturated dicarbonyl products sampled by SPME were quantified by GC-FID.The experiments were carried out in the EUPHORE outdoor simulation chambers. The results confirm that 1,4-dicarbonyls are the main products of the OH-initiated oxidation of furan and its methylated derivatives, a fact with environmental implications. Molar yields of (1.09 ± 0.41) and (0.90 ± 0.36) were obtained in two experiments of furan photo-oxidation. The yields of 4-oxo-2-pentenal and methylbutenedial were estimated to be (0.60 ± 0.24) and (0.83 ± 0.33) respectively, assuming the same SPME response factor as for butenedial. Furthermore, the unsaturated 1,4-dicarbonyls have also been identified in the chemical characterisation of the aerosols formed in the reactions. The yield of aerosols quantified were (8.5 ± 0.8)% in the photo-oxidation of furan, (1.85 ± 0.18)% in the photo-oxidation of 2-methylfuran and (5.5 ± 0.5)% in the photo-oxidation of 3-methylfuran, at the following concentrations of their precursors: 829 ± 249 ppbV and 748 ± 224 (in two furan experiments), 633 ± 190 in the 2-methylfuran and 641 ± 192 ppbV in the 3-methylfuran experiment.     

Effect of high concentrations of inorganic seed aerosols on secondary organic aerosol formation in the m-xylene/NOx photooxidation system

High concentrations (>15 μm³ cm^?3) of CaSO₄, Ca(NO₃)₂ and (NH₄)₂SO₄ were selected as surrogates of dry neutral, aqueous neutral and dry acidic inorganic seed aerosols, respectively, to study the effects of inorganic seeds on secondary organic aerosol (SOA) formation in irradiated m-xylene/NO_x photooxidation systems. The results indicate that neither ozone formation nor SOA formation is significantly affected by the presence of neutral aerosols (both dry CaSO₄ and aqueous Ca(NO₃)₂), even at elevated concentrations. The presence of high concentrations of (NH₄)₂SO₄ aerosols (dry acidic) has no obvious effect on ozone formation, but it does enhance SOA generation and increase SOA yields. In addition, the effect of dry (NH₄)₂SO₄ on SOA yield is found to be positively correlated with the (NH₄)₂SO₄ surface concentration, and the effect is pronounced only when the surface concentration reaches a threshold value. Further, it is proposed that the SOA generation enhancement is achieved by particle-phase heterogeneous reactions induced and catalyzed by the acidity of dry (NH₄)₂SO₄ seed aerosols.     

Evaluation of secondary organic aerosol formation in winter

Three different methods are used to predict secondary organic aerosol (SOA) concentrations in the San Joaquin Valley of California during the winter of 1995–1996 [Integrated Monitoring Study, (IMS95)]. The first of these methods estimates SOA by using elemental carbon as a tracer of primary organic carbon. The second method relies on a Lagrangian trajectory model that simulates the formation, transport, and deposition of secondary organic aerosol. The model includes a recently developed gas–particle partitioning mechanism. Results from both methods are in good agreement with the chemical speciation of organic aerosol during IMS95 and suggest that most of the OC measured during IMS95 is of primary origin. Under suitable conditions (clear skies, low winds, low mixing heights) as much as 15–20 μg C m⁻³ of SOA can be produced, mainly due to oxidation of aromatics. The low mixing heights observed during the winter in the area allow accumulation of SOA precursors and the acceleration of SOA formation. Clouds and fog slow down the production of secondary compounds, reducing their concentrations by a factor of two or three from the above maximum levels. In addition, it appears that there is significant diurnal variation of SOA concentration. A strong dependence of SOA concentrations on temperature is observed, along with the existence of an optimal temperature for SOA formation.     

Source apportionment of secondary organic aerosol during a severe photochemical smog episode

The UCD/CIT air quality model was modified to predict source contributions to secondary organic aerosol (SOA) by expanding the Caltech Atmospheric Chemistry Mechanism to separately track source apportionment information through the chemical reaction system as precursor species react to form condensable products. The model was used to predict source contributions to SOA in Los Angeles from catalyst-equipped gasoline vehicles, non-catalyst equipped gasoline vehicles, diesel vehicles, combustion of high sulfur fuel, other anthropogenic sources, biogenic sources, and initial/boundary conditions during the severe photochemical smog episode that occurred on 9 September 1993. Gasoline engines (catalyst+non-catalyst equipped) were found to be the single-largest anthropogenic source of SOA averaged over the entire model domain. The region-wide 24-h average concentration of SOA produced by gasoline engines was predicted to be 0.34 μg m⁻³ with a maximum 24-h average concentration of 1.81 μg m⁻³ downwind of central Los Angeles. The region-wide 24-h average concentration of SOA produced by diesel engines was predicted to be 0.02 μg m⁻³, with a maximum 24-h average concentration of 0.12 μg m⁻³ downwind of central Los Angeles. Biogenic sources are predicted to produce a region-wide 24-h average SOA value of 0.16 μg m⁻³, with a maximum 24-h average concentration of 1.37 μg m⁻³ in the less-heavily populated regions at the northern and southern edges of the air basin (close to the biogenic emissions sources). SOA concentrations associated with anthropogenic sources were weakly diurnal, with slightly lower concentrations during the day as mixing depth increased. SOA concentrations associated with biogenic sources were strongly diurnal, with higher concentrations of aqueous biogenic SOA at night when relative humidity (RH) peaked and little biogenic SOA formation during the day when RH decreased.     

Aqueous-phase reactive uptake of dicarbonyls as a source of organic aerosol over eastern North America

We use a global 3-D atmospheric chemistry model (GEOS-Chem) to simulate surface and aircraft measurements of organic carbon (OC) aerosol over eastern North America during summer 2004 (ICARTT aircraft campaign), with the goal of evaluating the potential importance of a new secondary organic aerosol (SOA) formation pathway via irreversible uptake of dicarbonyl gases (glyoxal and methylglyoxal) by aqueous particles. Both dicarbonyls are predominantly produced in the atmosphere by isoprene, with minor contributions from other biogenic and anthropogenic precursors. Dicarbonyl SOA formation is represented by a reactive uptake coefficient γ = 2.9 × 10^?3 and takes place mainly in clouds. Surface measurements of OC aerosol at the IMPROVE network in the eastern U.S. average 2.2 ± 0.7 μg C m^?3 for July–August 2004 with little regional structure. The corresponding model concentration is 2.8 ± 0.8 μg C m^?3, also with little regional structure due to compensating spatial patterns of biogenic, anthropogenic, and fire contributions. Aircraft measurements of water-soluble organic carbon (WSOC) aerosol average 2.2 ± 1.2 μg C m^?3 in the boundary layer (<2 km) and 0.9 ± 0.8 μg C m^?3 in the free troposphere (2–6 km), consistent with the model (2.0 ± 1.2 μg C m^?3 in the boundary layer and 1.1 ± 1.0 μg C m^?3 in the free troposphere). Source attribution for the WSOC aerosol in the model boundary layer is 27% anthropogenic, 18% fire, 28% semi-volatile SOA, and 27% dicarbonyl SOA. In the free troposphere it is 13% anthropogenic, 37% fire, 23% semi-volatile SOA, and 27% dicarbonyl SOA. Inclusion of dicarbonyl SOA doubles the SOA contribution to WSOC aerosol at all altitudes. Observed and simulated correlations of WSOC aerosol with other chemical variables measured aboard the aircraft suggest a major SOA source in the free troposphere compatible with the dicarbonyl mechanism.     

Sources and characteristics of carbonaceous aerosol in two largest cities in Pearl River Delta Region,China

PM_2.5 samples were collected at five sites in Guangzhou and Hong Kong, Pearl River Delta Region (PRDR), China in both summer and winter during 2004–2005. Elemental carbon (EC) and organic carbon (OC) in these samples were measured. The OC and EC concentrations ranked in the order of urban Guangzhou > urban Hong Kong > background Hong Kong. Total carbonaceous aerosol (TCA) contributed less to PM_2.5 in urban Guangzhou (32–35%) than that in urban Hong Kong (43–57%). The reason may be that, as an major industrial city in South China, Guangzhou would receive large amount of inorganic aerosol from all kinds of industries, however, as a trade center and seaport, urban Hong Kong would mainly receive organic aerosol and EC from container vessels and heavy-duty diesel trucks. At Hong Kong background site Hok Tsui, relatively lower contribution of TCA to PM_2.5 may result from contributions of marine inorganic aerosol and inland China pollutant. Strong correlation (R²=0.76–0.83) between OC and EC indicates minor fluctuation of emission and the secondary organic aerosol (SOA) formation in urban Guangzhou. Weak correlation between OC and EC in Hong Kong can be related to the impact of the long-range transported aerosol from inland China. Averagely, secondary OC (SOC) concentrations were 3.8–5.9 and 10.2–12.8 μg m⁻³, respectively, accounting for 21–32% and 36–42% of OC in summer and winter in Guangzhou. The average values of 4.2–6.8% for SOA/ PM_2.5 indicate that SOA was minor component in PM_2.5 in Guangzhou.     

In situ measurements of volatile aromatic hydrocarbon biodegradation rates in groundwater

Benzene and alkylbenzene biodegradation rates and patterns were measured using an in situ microcosm in a crude-oil contaminated aquifer near Bemidji, Minnesota. Benzene-D6, toluene, ethylbenzene, o-, m- and p-xylenes and four pairs of C₃- and C₄-benzenes were added to an in situ microcosm and studied over a 3-year period. The microcosm allowed for a mass-balance approach and quantification of hydrocarbon biodegradation rates within a well-defined iron-reducing zone of the anoxic plume. Among the BTEX compounds, the apparent order of persistence is ethylbenzene > benzene > m,p-xylenes > o-xylene ≥ toluene. Threshold concentrations were observed for several compounds in the in situ microcosm, below which degradation was not observed, even after hundreds of days. In addition, long lag times were observed before the onset of degradation of benzene or ethylbenzene. The isomer-specific degradation patterns were compared to observations from a multi-year study conducted using data collected from monitoring wells along a flowpath in the contaminant plume. The data were fit with both first-order and Michaelis-Menten models. First-order kinetics provided a good fit for hydrocarbons with starting concentrations below 1 mg/L and Michaelis-Menten kinetics were a better fit when starting concentrations were above 1 mg/L, as was the case for benzene. The biodegradation rate data from this study were also compared to rates from other investigations reported in the literature.     

Formation of organic tracers for isoprene SOA under acidic conditions

The chemical compositions of a series of secondary organic aerosol (SOA) samples, formed by irradiating mixtures of isoprene and NO in a smog chamber in the absence or presence of acidic aerosols, were analyzed using derivatization-based GC–MS methods. In addition to the known isoprene photooxidation products 2-methylglyceric acid, 2-methylthreitol, and 2-methylerythritol, three other peaks of note were detected: one of these was consistent with a silylated-derivative of sulfuric acid, while the remaining two were other oxidized organic compounds detected only when acidic aerosol was present. These two oxidation products were also detected in field samples, and their presence was found to be dependent on both the apparent degree of aerosol acidity as well as the availability of isoprene aerosol. The average concentrations of the sum of these two compounds in the ambient PM_2.5 samples ranged from below the GC–MS detection limit during periods when the isoprene emission rate or apparent acidity were low to approximately 200 ng m^?3 (calibrations being based on a surrogate compound) during periods of high isoprene emissions. These compounds presently unidentified have the potential to serve as organic tracers of isoprene SOA formed exclusively in the presence of acidic aerosol and may also be useful in assessments in determining the importance and impact of aerosol acidity on ambient SOA formation.     

Model evidence for a significant source of secondary organic aerosol from isoprene

We investigate how a recently suggested pathway for production of secondary organic aerosol (SOA) affects the consistency of simulated organic aerosol (OA) mass in a global three-dimensional model of oxidant-aerosol chemistry (GEOS-Chem) versus surface measurements from the interagency monitoring of protected visual environments (IMPROVE) network. Simulations in which isoprene oxidation products contribute to SOA formation, with a yield of 2.0% by mass reduce a model bias versus measured OA surface mass concentrations. The resultant increase in simulated OA mass concentrations during summer of 0.6–1.0 μg m⁻³ in the southeastern United States reduces the regional RMSE to 0.88 μg m⁻³ from 1.26 μg m⁻³. Spring and fall biases are also reduced, with little change in winter when isoprene emissions are negligible.     

Multi-year hourly PM2.5 carbon measurements in New York: Diurnal,day of week and seasonal patterns

Multi-year hourly measurements of PM_2.5 elemental carbon (EC) and organic carbon (OC) from a site in the South Bronx, New York were used to examine diurnal, day of week and seasonal patterns. The hourly carbon measurements also provided temporally resolved information on sporadic EC spikes observed predominantly in winter. Furthermore, hourly EC and OC data were used to provide information on secondary organic aerosol formation. Average monthly EC concentrations ranged from 0.5 to 1.4 μg m^?3 with peak hourly values of several μg m^?3 typically observed from November to March. Mean EC concentrations were lower on weekends (approximately 27% lower on Saturday and 38% lower on Sunday) than on weekdays (Monday to Friday). The weekday/weekend difference was more pronounced during summer months and less noticeable during winter. Throughout the year EC exhibited a similar diurnal pattern to NO_x showing a pronounced peak during the morning commute period (7–10 AM EST). These patterns suggest that EC was impacted by local mobile emissions and in addition by emissions from space heating sources during winter months. Although EC was highly correlated with black carbon (BC) there was a pronounced seasonal BC/EC gradient with summer BC concentrations approximately a factor of 2 higher than EC. Average monthly OC concentrations ranged from 1.0 to 4.1 μg m^?3 with maximum hourly concentrations of 7–11 μg m^?3 predominantly in summer or winter months. OC concentrations generally correlated with PM_2.5 total mass and aerosol sulfate and with NO_x during winter months. OC showed no particular day of week pattern. The OC diurnal pattern was typically different than EC except in winter when OC tracked EC and NO_x indicating local primary emissions contributed significantly to OC during winter at the urban location. On average secondary organic aerosol was estimated to account for 40–50% of OC during winter and up to 63–73% during summer months.     

Verification of a source-oriented externally mixed air quality model during a severe photochemical smog episode

The CIT/UCD three-dimensional source-oriented externally mixed air quality model is tested during a severe photochemical smog episode (Los Angeles, 7–9 September 1993) using two different chemical mechanisms that describe the formation of ozone and secondary reaction products. The first chemical mechanism is the secondary organic aerosol mechanism (SOAM) that is based on SAPRC90 with extensions to describe the formation of condensable organic products. The second chemical mechanism is the caltech atmospheric chemistry mechanism (CACM) that is based on SAPRC99 with more detailed treatment of organic oxidation products.The predicted ozone concentrations from the CIT/UCD/SOAM and the CIT/UCD/CACM models agree well with the observations made at most monitoring sites with a mean normalized error of approximately 0.4–0.5. Good agreement is generally found between the predicted and measured NO_x concentrations except during morning rush hours of 6–10 am when NO_x concentrations are under-predicted at most locations. Total VOC concentrations predicted by the two chemical mechanisms agree reasonably well with the observations at three of the four sites where measurements were made. Gas-phase concentrations of phenolic compounds and benzaldehyde predicted by the UCD/CIT/CACM model are higher than the measured concentrations whereas the predicted concentrations of other aromatic compounds approximately agree with the measured values.The fine airborne particulate matter mass concentrations (PM_2.5) predicted by the UCD/CIT/SOAM and UCD/CIT/CACM models are slightly greater than the observed values during evening hours and lower than observed values during morning rush hours. The evening over-predictions are driven by an excess of nitrate, ammonium ion and sulfate. The UCD/CIT/CACM model predicts higher nighttime concentrations of gaseous precursors leading to the formation of particulate nitrate than the UCD/CIT/SOAM model. Elemental carbon and total organic mass are under-predicted by both models during morning rush hour periods. When this latter finding is combined with the NO_x under-predictions that occur at the same time, it suggests a systematic bias in the diesel engine emissions inventory. The mass of particulate total organic carbon is under-predicted by both the UCD/CIT/SOAM and UCD/CIT/CACM models during afternoon hours. Elemental carbon concentrations generally agree with the observations at this time. Both the UCD/CIT/SOAM and UCD/CIT/CACM models predict low concentrations of secondary organic aerosol (SOA) (<3.5 μg m⁻³) indicating that both models could be missing SOA formation pathways. The representation of the aerosol as an internal mixture vs. a source-oriented external mixture did not significantly affect the predicted concentrations during the current study.     

Feasibility of a simple laboratory approach for determining temperature influence on SPMD–air partition coefficients of selected compounds

Semipermeable membrane devices (SPMDs) are a widely used passive sampling methodology for both waterborne and airborne hydrophobic organic contaminants. The exchange kinetics and partition coefficients of an analyte in a SPMD are mediated by its physicochemical properties and certain environmental conditions. Controlled laboratory experiments are used for determining the SPMD–air (K_sa's) partition coefficients and the exchange kinetics of organic vapors. This study focused on determining a simple approach for measuring equilibrium K_sa's for naphthalene (Naph), o-chlorophenol (o-CPh) and p-dichlorobenzene (p-DCB) over a wide range of temperatures. SPMDs were exposed to test chemical vapors in small, gas-tight chambers at four different temperatures (−16, −4, 22 and 40 °C). The exposure times ranged from 6 h to 28 d depending on test temperature. K_sa's or non-equilibrium concentrations in SPMDs were determined for all compounds, temperatures and exposure periods with the exception of Naph, which could not be quantified in SPMDs until 4 weeks at the −16 °C temperature. To perform this study the assumption of constant and saturated atmospheric concentrations in test chambers was made. It could influence the results, which suggest that flow through experimental system and performance reference compounds should be used for SPMD calibration.     

Seasonal characteristics of water-soluble organic carbon in atmospheric particles in the inland Kanto plain,Japan

An investigation of water-soluble organic carbon (WSOC) in atmospheric particles was conducted as an index of the formation of secondary organic aerosol (SOA) from April 2005 to March 2006 at Maebashi and Akagi located in the inland Kanto plain in Japan. Fine (<2.1 μm) and coarse (2.1–11 μm) particles were collected by using an Andersen low-volume air sampler, and WSOC, organic carbon (OC), elemental carbon (EC), and ionic components were measured. The mean mass concentrations of the fine particles were 22.2 and 10.5 μg m^?3 at Maebashi and Akagi, respectively. The WSOC in fine particles accounted for a large proportion (83%) of total WSOC. The concentration of fine WSOC ranged from 1.2 to 3.5 μg-C m^?3 at Maebashi, rising from summer to fall. At Akagi, it rose from spring to summer, associated with the southerly wind from urban areas. The WSOC/OC ratio increased in summer at both sites, but the ratio at Akagi was higher, which we attributed to differences in primary emissions and secondary formation between the sites. The fine WSOC concentration was significantly positively correlated with concentrations of SO₄^2?, EC, and K⁺, and we inferred that WSOC was produced by photochemical reaction and caused by the combustion of both fuel and biomass. We estimated that SOA accounted for 11–30% of the fine particle mass concentration in this study, suggesting that SOA is a significant year-round component in fine particles.     

Heterogeneous SOA yield from ozonolysis of monoterpenes in the presence of inorganic acid

The secondary organic aerosol (SOA) yield of a series of montoerpenes was investigated to determine the relative amounts of organic mass, which can be attributed to mass produced by heterogeneous acid-catalyzed reactions. Five monoterpenes (α-pinene, terpinolene, d-limonene, Δ²-carene, β-pinene) were studied using a 2 m³ indoor Teflon chamber and SOA was created in the presence of both acidic and neutral inorganic seed aerosol. The relative humidity was varied to create differing acidic seed environments. The heterogeneous aerosol production was influenced by the seed mass concentration, the acidity of the inorganic seed aerosol, and also molecular structure of the monoterpene ozonolysis products. This study also can be incorporated with our previously presented model of the kinetic expression for SOA mass production from heterogeneous acid-catalyzed reactions.     

Measurement and analysis of atmospheric concentrations of isoprene and its reaction products in central Texas

A field experiment was conducted in August 1998 to investigate the concentrations of isoprene and isoprene reaction products in the surface and mixed layers of the atmosphere in Central Texas. Measured near ground-level concentrations of isoprene ranged from 0.3 (lower limit of detection – LLD) to 10.2 ppbv in rural regions and from 0.3 to 6.0 ppbv in the Austin urban area. Rural ambient formaldehyde levels ranged from 0.4 ppbv (LLD) to 20.0 ppbv for 160 rural samples collected, while the observed range was smaller at Austin (0.4–3.4 ppbv) for a smaller set of samples (37 urban samples collected). Methacrolein levels did not vary as widely, with rural measurements from 0.1 ppbv (LLD) to 3.7 ppbv and urban concentrations varying between 0.2 and 5.7 ppbv. Isoprene flux measurements, calculated using a simple box model and measured mixed-layer isoprene concentrations, were in reasonable agreement with emission estimates based on local ground cover data. Ozone formation attributable to biogenic hydrocarbon oxidation was also calculated. The calculations indicated that if the ozone formation occurred at low VOC/NO_x ratios, up to 20 ppbv of ozone formed could be attributable to biogenic photooxidation. In contrast, if the biogenic hydrocarbon reaction products were formed under low NO_x conditions, ozone production attributable to biogenics oxidation would be as low as 1 ppbv. This variability in ozone formation potentials implies that biogenic emissions in rural areas will not lead to peak ozone levels in the absence of transport of NO_x from urban centers or large rural NO_x sources.