Emission factors of PAHs,methoxyphenols, levoglucosan,elemental carbon and organic carbon from simulated wheat and Kentucky bluegrass stubble burns

Emission factors (EFs) of pollutants from post-harvest agricultural burning are required for predicting downwind impacts of smoke and inventorying emissions. EFs of polycyclic aromatic hydrocarbons (PAH), methoxyphenols (MP), levoglucosan (LG), elemental carbon (EC) and organic carbon (OC) from wheat and Kentucky bluegrass (KBG) stubble burning were quantified in a US EPA test burn facility. The PAH and MP EFs for combined solid+gas phases are 17±8.2 mg kg⁻¹ and 79±36 mg kg⁻¹, respectively, for wheat and 21±15 mg kg⁻¹ and 35±24 mg kg⁻¹, respectively, for KBG. LG, particulate EC and artifact-corrected OC EFs are 150±130 mg kg⁻¹, 0.35±0.16 g kg⁻¹ and 1.9±1.1 g kg⁻¹, respectively, for wheat and 350±510 mg kg⁻¹, 0.63±0.056 g kg⁻¹ and 6.9±0.85 g kg⁻¹, respectively, for KBG. Positive artifacts associated with OC sampling were evaluated and remedied with a two-filter system. EC and OC accounted for almost two-thirds of PM_2.5 mass, while LG accounted for just under 3% of the PM_2.5 mass. Since EFs of these pollutants generally decreased with increasing combustion efficiency (CE), identifying and implementing methods of increasing the CEs of burns would help reduce their emissions from agricultural field burning. PAH, OC and EC EFs are comparable to other similar studies reported in literature. MP EFs appear dependent on the stubble type and are lower than the EFs for hard and softwoods reported in literature, possibly due to the lower lignin content in wheat and KBG.     

A novel field measurement method for determining fine particle and gas emissions from residential wood combustion

Emission data from residential wood combustion are usually obtained on test stands in the laboratory but these measurements do not correspond to the operational conditions in the field because of the technological boundary conditions (e.g. testing protocol, environmental and draught conditions). The field measurements take into account the habitual practice of the operators and provide the more reliable results needed for emission inventories. In this study, a workable and compact method for measuring emissions from residential wood combustion in winter conditions was developed. The emissions for fine particle, gaseous and PAH compounds as well as particle composition in real operational conditions were measured from seven different appliances. The measurement technique worked well and was evidently suitable for winter conditions. It was easy and fast to use, and no construction scaffold was needed. The dilution of the sample with the combination of a porous tube diluter and an ejector diluter was well suited to field measurement. The results indicate that the emissions of total volatile organic carbon (TVOC) (17 g kg⁻¹ (of dry wood burned)), carbon monoxide (CO) (120 g kg⁻¹) and fine particle mass (PM₁) (2.7 g kg⁻¹) from the sauna stove were higher than in the other measured appliances. In the masonry heaters, baking oven and stove, the emissions were 2.9–9 g kg⁻¹ TVOC, 28–68 g kg⁻¹ CO and 0.6–1.6 g kg⁻¹ PM₁. The emission of 12 PAHs (PAH₁₂) from the sauna stove was 164 mg kg⁻¹ and consisted mainly of PAHs with four benzene rings in their structure. PAH₁₂ emission from other appliances was, on average, 21 mg kg⁻¹ and was dominated by 2-ring PAHs. These results indicate that despite the non-optimal operational practices in the field, the emissions did not differ markedly from the laboratory measurements.     

Heavy metal distribution in dust from elementary schools in Hermosillo,Sonora, México

The city of Hermosillo, Sonora in northern Mexico was investigated for its heavy metals content. Samples of sedimented dust in roofs from 25 elementary schools were analyzed for their contents of Ni, Cr, Zn, Cd, Co, Ba, V, Pb, Fe and Cu after digestion with nitric acid. The results of the analysis were used to determine spatial distribution and magnitude of heavy metals pollution. The results of this study reveal that heavy metals distribution is different in two areas of the city. The southern area contains higher concentrations of heavy metals than the northcentral area. The mean level of Cd in exterior dust is 5.65 mg kg⁻¹ in the southern area whereas the mean level of Cd is 2.83 mg kg⁻¹ in the northcentral area. Elevated concentrations of Zn (2012 mg kg⁻¹), Pb (101.88 mg kg⁻¹), Cr (38.13 mg kg⁻¹) and Cd (28.38 mg kg⁻¹) in roof dust were found in samples located near industrial areas. Principal component analysis (PCA) was applied to the data matrix to evaluate the analytical results and to identify the possible pollution sources of metals. PCA shows two main sources: (1) Pb, Cd, Cr and Zn are mainly derived from industrial sources, combined with traffic sources; (2) Fe, Co and Ba are mainly derived from natural sources. V and Ni are highly correlated and possibly related to fuel combustion processes. Enrichment factors were calculated, which in turn further confirms the source identification. Ba and Co are dominantly crustal. Anthropogenically added Cd, Pb, Zn and Cr show maximum enrichment relative to the upper continental crustal component. The distribution of the heavy metals in dust does not seem to be controlled only by the topography of the city, but also by the location of the emission sources.     

The relationship of root porosity and radial oxygen loss on arsenic tolerance and uptake in rice grains and straw

The correlations among arsenic (As) accumulation in grains and straw, rates of radial oxygen loss (ROL), and porosity of roots using 25 rice cultivars were investigated based on two pot experiments: (1) soil with addition of 100 mg As kg^?1 for analysis of As in grains and straw, and (2) deoxygenated solution for analyzing rates of ROL and porosity of roots. The results showed that there were great differences in grain As (0.71–1.72 mg kg^?1) and straw As (15.6–31.7 mg kg^?1), rates of ROL (7.40–13.24 mmol O₂ kg^?1 root d.w. h^?1), and porosity (20.91–33.08%) among the cultivars. There were significant negative correlations between As in grains or straw and ROL and porosity, and significant positive correlations between rates of ROL and porosities, respectively. Rice cultivars with high porosities tended to possess higher rates of ROL, and had higher capacities for limiting the transfer of As to aboveground tissues.     

Real-world emission factors of fifteen carbonyl compounds measured in a Hong Kong tunnel

Real-world vehicle emissions of carbonyls were determined in summer and winter of 2003 at the Shing Mun Tunnel, Hong Kong. Fifteen carbonyl species have been analyzed in this study. The total measured carbonyls emission factors ranged from 21.7 to 68.9 mg veh⁻¹ km⁻¹ among different measurement periods, with an average of 35.8±11.9 mg veh⁻¹ km⁻¹. Higher carbonyl emissions were found to be associated with a high proportion of diesel-fueled vehicles. Total measured carbonyl emissions from Diesel-fueled Vehicle (DV, 71.5 mg veh⁻¹ km⁻¹) were about 7 times higher than those from Non-Diesel-fueled Vehicle (NDV, 10 mg veh⁻¹ km⁻¹). The five carbonyls with the largest DV emission factor were, in decreasing order, formaldehyde (38.3 mg veh⁻¹ km⁻¹), acetaldehyde (11.4 mg veh⁻¹ km⁻¹), acetone (5.3 mg veh⁻¹ km⁻¹), crotonaldehyde (5.2 mg veh⁻¹ km⁻¹) and benzaldehyde (2.0 mg veh⁻¹ km⁻¹). These five carbonyl compounds together accounted for 87% of the sum of all DV carbonyl emission factors. For NDV, the five most abundant carbonyls in NDV emission at the tunnel were, in decreasing order, formaldehyde (3.5 mg veh⁻¹ km⁻¹), acetone (1.8 mg veh⁻¹ km⁻¹), methyl ethyl ketone (1.6 mg veh⁻¹ km⁻¹), m,p-tolualdehyde (1.0 mg veh⁻¹ km⁻¹) and acetaldehyde (mg veh⁻¹ km⁻¹). They accounted for 85% of the sum of all NDV carbonyl emission factors.     

Characterization of emissions from portable household combustion devices: particle size distributions,emission rates and factors,and potential exposures

A series of source tests were conducted to characterize emissions of particulate matter (PM), carbon monoxide (CO), carbon dioxide (CO₂), methane (CH₄), and total hydrocarbon (THC ) from five types of portable combustion devices. Tested combustion devices included a kerosene lamp, an oil lamp, a kerosene space heater, a portable gas range, and four unscented candles. All tests were conducted either in a well-mixed chamber or a well-mixed room, which enables us to determine emission rates and emission factors using a single-compartment mass balance model. Particle mass concentrations and number concentrations were measured using a nephelometric particle monitor and an eight-channel optical particle counter, respectively. Real-time CO concentrations were measured with an electrochemical sensor CO monitor. CO₂, CH₄, and THC were measured using a GC-FID technique. The results indicate that all particles emitted during steady burning in each of the tested devices were smaller than 1.0 μm in diameter with the vast majority in the range between 0.1 and 0.3 μm. The PM mass emission rates and emission factors for the tested devices ranged from 5.6±0.1 to 142.3±40.8 mg h⁻¹ and from 0.35±0.06 to 9.04±4.0 mg g⁻¹, respectively. The CO emission rates and emission factors ranged from 4.7±3.0 to 226.7±100 mg h⁻¹ and from 0.25±0.12 to 1.56±0.7 mg g⁻¹, respectively. The CO₂ emission rates and emission factors ranged from 5500±700 to 210,000±90,000 mg h⁻¹ and from 387±45 to 1689±640 mg g⁻¹, respectively. The contributions of CH₄ and THC to emission inventories are expected to be insignificant due both to the small emission factors and to the relatively small quantity of fuel consumed by these portable devices. An exposure scenario analysis indicates that every-day use of the kerosene lamp in a village house can generate fine PM exposures easily exceeding the US promulgated NAAQS for PM_2.5.     

Nitric oxide emissions from soils amended with municipal waste biosolids

Land spreading nitrogen-rich municipal waste biosolids (NO₃⁻-N<256 mg N kg⁻¹ dry weight, NH₃-N∼23,080 mg N kg⁻¹ dry weight, Total Kjeldahl N∼41,700 mg N kg⁻¹ dry weight) to human food and non-food chain land is a practice followed throughout the US. This practice may lead to the recovery and utilization of the nitrogen by vegetation, but it may also lead to emissions of biogenic nitric oxide (NO), which may enhance ozone pollution in the lower levels of the troposphere. Recent global estimates of biogenic NO emissions from soils are cited in the literature, which are based on field measurements of NO emissions from various agricultural and non-agricultural fields. However, biogenic emissions of NO from soils amended with biosolids are lacking. Utilizing a state-of-the-art mobile laboratory and a dynamic flow-through chamber system, in-situ concentrations of nitric oxide (NO) were measured during the spring/summer of 1999 and winter/spring of 2000 from an agricultural soil which is routinely amended with municipal waste biosolids. The average NO flux for the late spring/summer time period (10 June 1999–5 August 1999) was 69.4±34.9 ng N m⁻² s⁻¹. Biosolids were applied during September 1999 and the field site was sampled again during winter/spring 2000 (28 February 2000–9 March 2000), during which the average flux was 3.6±1.7 ng N m⁻² s⁻¹. The same field site was sampled again in late spring (2–9 June 2000) and the average flux was 64.8±41.0 ng N m⁻² s⁻¹. An observationally based model, developed as part of this study, found that summer accounted for 60% of the yearly emission while fall, winter and spring accounted for 20%, 4% and 16% respectively. Field experiments were conducted which indicated that the application of biosolids increases the emissions of NO and that techniques to estimate biogenic NO emissions would, on a yearly average, underestimate the NO flux from this field by a factor of 26. Soil temperature and % water filled pore space (%WFPS) were observed to be significant variables for predicting NO emissions, however %WFPS was found to be most significant during high soil temperature conditions. In the range of pH values found at this site (5.8±0.3), pH was not observed to be a significant parameter in predicting NO emissions.     

Polycyclic aromatic hydrocarbon emission from straw burning and the influence of combustion parameters

A simulated burning experiment was conducted in a tubular furnace system to examine the emission of polycyclic aromatic hydrocarbons (PAHs) from the burning of rice and bean straw, and the influence of combustion parameters was investigated. Total emission amounts of 16 PAHs (∑PAHs) from the burning of rice and bean straw ranged from 9.29 to 23.6 μg g^?1 and from 3.13 to 49.9 μg g^?1, respectively, which increased with the increase of temperatures from 200 to 700 °C. The contribution of combustion to individual PAH yields was about 80.6–100%, which was generally increased with the increase of burning temperature. Moisture content in straw had a negative effect on PAH formation, especially on PAHs with low molecular weight. ∑PAHs emission amounts decreased by 78.2% for bean straw with a moisture content of 30% in comparison with that for dried straw. In addition, PAH emission amounts increased with the increase of O₂ content in supplied air and then decreased, which showed a maximum emission at O₂ content of 40%. The source fingerprint of PAHs in emission from straw burning was established, which showed that naphthalene accounted for 35.0 ± 7.4% of ∑PAHs. Based on the experimental data, emission amounts of ∑PAHs from the burning of rice and bean straw were estimated to be 320–357 and 32.5–76.0 tons to ambient air per year in China, respectively.     

Dioxins,furans and polycyclic aromatic hydrocarbons emissions from a hospital and cemetery waste incinerator

An experimental campaign was carried out on a hospital and cemetery waste incineration plant in order to assess the emissions of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs). Raw gases were sampled in the afterburning chamber, using a specifically designed device, after the heat recovery section and at the stack. Samples of slags from the combustion chamber and fly ashes from the bag filter were also collected and analyzed. PCDD/Fs and PAHs concentrations in exhaust gas after the heat exchanger (200–350 °C) decreased in comparison with the values detected in the afterburning chamber. Pollutant mass balance regarding the heat exchanger did not confirm literature findings about the de novo synthesis of PCDD/Fs in the heat exchange process. In spite of a consistent reduction of PCDD/Fs in the flue gas treatment system (from 77% up to 98%), the limit of 0.1 ng ITEQ Nm⁻³ at the stack was not accomplished. PCDD/Fs emission factors for air spanned from 2.3 up to 44 μg ITEQ t⁻¹ of burned waste, whereas those through solid residues (mainly fly ashes) were in the range 41–3700 μg ITEQ t⁻¹. Tests run with cemetery wastes generally showed lower PCDD/F emission factors than those with hospital wastes. PAH total emission factors (91–414 μg kg⁻¹ of burned waste) were in the range of values reported for incineration of municipal and industrial wastes. In spite of the observed release from the scrubber, carcinogenic PAHs concentrations at the stack (0.018–0.5 μg Nm⁻³) were below the Italian limit of 10 μg Nm⁻³.     

Global atmospheric emission inventory of polycyclic aromatic hydrocarbons (PAHs) for 2004

The global atmospheric emissions of the 16 polycyclic aromatic hydrocarbons (PAHs) listed as the US EPA priority pollutants were estimated using reported emission activity and emission factor data for the reference year 2004. A database for emission factors was compiled, and their geometric means and frequency distributions applied for emission calculation and uncertainty analysis, respectively. The results for 37 countries were compared with other PAH emission inventories. It was estimated that the total global atmospheric emission of these 16 PAHs in 2004 was 520 giga grams per year (Gg y^?1) with biofuel (56.7%), wildfire (17.0%) and consumer product usage (6.9%) as the major sources, and China (114 Gg y^?1), India (90 Gg y^?1) and United States (32 Gg y^?1) were the top three countries with the highest PAH emissions. The PAH sources in the individual countries varied remarkably. For example, biofuel burning was the dominant PAH source in India, wildfire emissions were the dominant PAH source in Brazil, while consumer products were the major PAH emission source in the United States. In China, in addition to biomass combustion, coke ovens were a significant source of PAHs. Globally, benzo(a)pyrene accounted for 0.05% to 2.08% of the total PAH emission, with developing countries accounting for the higher percentages. The PAH emission density varied dramatically from 0.0013 kg km^?2 y in the Falkland Islands to 360 kg km^?2 y in Singapore with a global mean value of 3.98 kg km^?2 y. The atmospheric emission of PAHs was positively correlated to the country's gross domestic product and negatively correlated with average income. Finally, a linear bivariate regression model was developed to explain the global PAH emission data.     

Inventory of aerosol and sulphur dioxide emissions from India. Part II—biomass combustion

A spatially resolved biomass burning data set, and related emissions of sulphur dioxide and aerosol chemical constituents was constructed for India, for 1996–1997 and extrapolated to the INDOEX period (1998–1999). Sources include biofuels (wood, crop waste and dung-cake) and forest fires (accidental, shifting cultivation and controlled burning). Particulate matter (PM) emission factors were compiled from studies of Indian cooking stoves and from literature for open burning. Black carbon (BC) and organic matter (OM) emissions were estimated from these, accounting for combustion temperatures in cooking stoves. Sulphur dioxide emission factors were based on fuel sulphur content and reported literature measurements. Biofuels accounted 93% of total biomass consumption (577 MT yr⁻¹), with forest fires contributing only 7%. The national average biofuel mix was 56 : 21 : 23% of fuelwood, crop waste and dung-cake, respectively. Compared to fossil fuels, biomass combustion was a minor source of SO₂ (7% of total), with higher emissions from dung-cake because of its higher sulphur content. PM_2.5 emissions of 2.04 Tg yr⁻¹ with an “inorganic fraction” of 0.86 Tg yr⁻¹ were estimated. Biomass combustion was the major source of carbonaceous aerosols, accounting 0.25 Tg yr⁻¹ of BC (72% of total) and 0.94 Tg yr⁻¹ of OM (76% of total). Among biomass, fuelwood and crop waste were primary contributors to BC emissions, while dung-cake and forest fires were primary contributors to OM emissions. Northern and the east-coast India had high densities of biomass consumption and related emissions. Measurements of emission factors of SO₂, size resolved aerosols and their chemical constituents for Indian cooking stoves are needed to refine the present estimates.     

Composition and emissions of VOCs in main- and side-stream smoke of research cigarettes

It is well known that mainstream (MS) and sidestream (SS) cigarette smoke contains a vast number of chemical substances. Previous studies have emphasized SS smoke rather than MS smoke to which smokers are exposed, and most have used chamber tests that have several disadvantages such as wall losses. Emissions from standard research cigarettes have been measured, but relatively few constituents have been reported, and only the 1R4F (low nicotine) cigarette type has been tested. This study provides a comprehensive characterization of total, MS and SS smoke emissions for the 1R5F (ultra low nicotine), 2R4F (low nicotine), and 1R3F (standard nicotine) research cigarettes research cigarettes, including emission factors for a number of toxic compounds (e.g., benzene) and tobacco smoke tracers (e.g., 2,5-dimethyl furan). Emissions of volatile organic compounds (VOCs) and particulate matter (PM) are quantified using a dynamic dilution emission measurement system that is shown to produce accurate, rapid and reproducible results for over 30 VOCs and PM. SS and MS emissions were accurately apportioned based on a mass balance of total emissions. As expected, SS emissions greatly exceeded MS emissions. The ultra low nicotine cigarette had lower emissions of most VOCs compared to low and standard nicotine cigarettes, which had similar emissions. Across the three types of cigarettes, emissions of benzene (296–535 μg cig⁻¹), toluene (541–1003 μg cig⁻¹), styrene (90–162 μg cig⁻¹), 2-dimethyl furan (71–244 μg cig⁻¹), naphthalene (15–18 μg cig⁻¹) and other VOCs were generally comparable to or somewhat higher than literature estimates using chamber tests.     

The effects of evaporating essential oils on indoor air quality

Essential oils, predominantly comprised of a group of aromatic chemicals, have attracted increasing attention as they are introduced into indoor environments through various forms of consumer products via different venues. Our study aimed to characterize the profiles and concentrations of emitted volatile organic compounds (VOCs) when evaporating essential oils indoors. Three popular essential oils in the market, lavender, eucalyptus, and tea tree, based on a nation-wide questionnaire survey, were tested. Specific aromatic compounds of interest were sampled during evaporating the essential oils, and analyzed by GC-MS. Indoor carbon monoxide (CO), carbon dioxide (CO₂), total volatile organic compounds (TVOCs), and particulate matters (PM₁₀) were measured by real-time, continuous monitors, and duplicate samples for airborne fungi and bacteria were collected in different periods of the evaporation. Indoor CO (average concentration 1.48 vs. 0.47 ppm at test vs. background), CO₂ (543.21 vs. 435.47 ppm), and TVOCs (0.74 vs. 0.48 ppm) levels have increased significantly after evaporating essential oils, but not the PM₁₀ (2.45 vs. 2.42 ppm). The anti-microbial activity on airborne microbes, an effect claimed by the use of many essential oils, could only be found at the first 30–60 min after the evaporation began as the highest levels of volatile components in these essential oils appeared to emit into the air, especially in the case of tea tree oil. High emissions of linalool (0.092–0.787 mg m⁻³), eucalyptol (0.007–0.856 mg m⁻³), d-limonene (0.004–0.153 mg m⁻³), ρ-cymene (0.019–0.141 mg m⁻³), and terpinene-4-ol-1 (0.029–0.978 mg m⁻³), all from the family of terpenes, were observed, and warranted for further examination for their health implications, especially for their potential contribution to the increasing indoor levels of secondary pollutants such as formaldehyde and secondary organic aerosols (SOAs) in the presence of ozone.     

Natural radioactivity levels in soil samples from some areas of Himachal Pradesh,India using γ-ray spectrometry

²²⁶Ra, ²³²Th and ⁴⁰K analysis has been carried out in soil samples collected from some areas of Himachal Pradesh, India using γ-ray spectrometry. The measured activity in soil ranges from 42.09 to 79.63 Bq kg⁻¹, 52.83 to 105.81 Bq kg⁻¹ and 95.33 to 160.30 Bq kg⁻¹ for ²²⁶Ra, ²³²Th and ⁴⁰K with the mean values of 57.34, 82.22 and 135.75 Bq kg⁻¹, respectively. The measured activity concentration of ²²⁶Ra and ²³²Th in soil samples collected from these areas is higher and for ⁴⁰K is lower than the world average. The radium equivalent activity in all the soil samples is lower than the safe limit set in the OECD report (370 Bq kg⁻¹). The value of the external exposure dose has been determined from the content of these radionuclides in soil. It has been observed that on the average, the outdoor terrestrial gamma air absorbed dose rate is about 83.28 nGy h⁻¹. The study yields an annual effective dose in the range of 0.07–0.13 mSv. The average value of annual effective dose lies in the global range of outdoor radiation exposure given in United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) [(2000). Effects and risks of ionizing radiations. UN, NY]. The activity concentration of ²³⁸U has also been determined using fission track technique and the values range from 3.26 to 7.71 mg kg⁻¹ with a mean value of 4.38 mg kg⁻¹.     

Decadal reductions of traffic emissions on a transit route in Austria – results of the Tauerntunnel experiment 1997

Real-world emissions of a traffic fleet on a transit route in Austria were determined in the Tauerntunnel experiment in October 1997. The total number of vehicles and the average speed was nearly the same on both measuring days (465 vehicles 30 min⁻¹ and 76 km h⁻¹ on the workday, 477 and 78 km h⁻¹ on Sunday). The average workday fleet contained 17.6% heavy-duty vehicles (HDV) and the average Sunday fleet 2.8% HDV resulting in up to four times higher emission rates per vehicle per km on the workday than on Sunday for most of the regulated components (CO₂, CO, NO_x, SO₂, and particulate matter-PM10). Emission rates of NMVOC accounted for 200 mg vehicle⁻¹ km⁻¹ on both days. The relative contributions of light-duty vehicles (LDV) and HDV to the total emissions indicated that aldehydes, BTEX (benzene, toluene, ethylbenzene, xylenes), and alkanes are mainly produced by LDV, while HDV dominated emissions of CO, NO_x, SO₂, and PM10. Emissions of NO_x caused by HDV were 16,100 mg vehicle⁻¹ km⁻¹ (as NO₂). Produced by LDV they were much lower at 360 mg vehicle⁻¹ km⁻¹. Comparing the emission rates to the results that were obtained by the 1988 experiment at the same place significant changes in the emission levels of hydrocarbons and CO, which accounted 1997 to only 10% of the levels in 1988, were noticed. However, the decrease of PM has been modest leading to values of 80 and 60% of the levels in 1988 on the workday and on Sunday, respectively. Emission rates of NO_x determined on the workday in 1997 were 3130 mg vehicle⁻¹ km⁻¹ and even higher than in 1988 (2630 mg vehicle⁻¹ km⁻¹), presumable due to the increase of the HD-traffic.     

Biogenic VOC emissions from fresh leaf mulch and wood chips of Grevillea robusta (Australian Silky Oak)

The emissions of VOC from freshly cut and shredded Grevillea robusta (Australian Silky Oak) leaves and wood have been measured. The VOC emissions from fresh leaf mulch and wood chips lasted typically for 30 and 20 h respectively, and consisted primarily of ethanol, (E)-2-hexenal, (Z)-3-hexen-1-ol and acetaldehyde. The integrated emissions of the VOCs were 0.38±0.04 g kg⁻¹ from leaf mulch, and 0.022±0.003 g kg⁻¹ from wood chips. These emissions represent a source of VOCs in urban and rural air that has previously been unquantified and is currently unaccounted for. These VOCs from leaf mulch and wood chips will contribute to both urban photochemistry and secondary organic aerosol formation. Any CH₄ emissions from leaf mulch and wood chips were <1×10⁻¹¹ g g dry mass⁻¹ s⁻¹.     

Methane emissions from lakes and floodplains in Pantanal,Brazil

To evaluate the tropical wetlands contribution to the methane (CH₄) burden better, field campaigns were performed during 2004 and 2005 near the Miranda River, in five sites inside the Brazilian Pantanal region. The CH₄ fluxes were determined using the static chamber technique. Environmental variables that may affect CH₄ emissions, as the water depth, the water and air temperatures were also measured. The overall average of the 320 individual CH₄ flux measurements made between March/2004 and March/2005 was 142±314 mg CH₄ m⁻² d⁻¹, which is a value near the ones observed in other tropical flooded regions. About 47% of the fluxes measurements presented nonlinear increases in the chamber concentrations, which were assumed to be linked to CH₄ losses through bubbles. The bubble flux represented about 90% of the total CH₄ losses in the measurements and ranged from 1 to 2187 mg CH₄ m⁻² d⁻¹ with an average of 292±410 mg CH₄ m⁻² d⁻¹ (median: 153 mg CH₄ m⁻² d⁻¹). The diffusive flux ranged from 1 to 124 mg CH₄ m⁻² d⁻¹, with an average of 10±17 mg CH₄ m⁻² d⁻¹ (median: 5 mg CH₄ m⁻² d⁻¹). The fluxes from lakes were smaller than those observed in the floodplains, where the flooding was more dependent on the seasonal cycle. The diffusive flux showed a slight, but not statistically significant seasonal variation, following the seasonal variation of the flooding of the Pantanal region. A rough estimative of the total annual CH₄ emission shows that the contribution of the Pantanal is about 3.3 Tg CH₄ yr⁻¹, which represents about 3.3% of the total CH₄ emissions estimated to be originated in wetlands ecosystems. It may be a conservative estimate, which may present a large interannual variation, since it was obtained during one of the lowest flood of the Pantanal in recent years.     

Interspecies and interregional comparisons of the chemistry of PAHs and trace elements in mosses Hylocomium splendens (Hedw.) B.S.G. and Pleurozium schreberi (Brid.) Mitt. from Poland and Alaska

Comparative biogeochemical studies performed on the same plant species in remote areas enable pinpointing interspecies and interregional differences of chemical composition. This report presents baseline concentrations of PAHs and trace elements in moss species Hylocomium splendens and Pleurozium schreberi from the Holy Cross Mountains (south-central Poland) (HCM) and Wrangell–Saint Elias National Park and Preserve (Alaska) and Denali National Park and Preserve (Alaska). Total PAH concentrations in the mosses of HCM were in the range of 473–2970 μg kg^?1 (dry weight basis; DW), whereas those in the same species of Alaska were 80–3390 μg kg^?1 DW. Nearly all the moss samples displayed the similar ring sequence: 3 > 4 > 5 > 6 for the PAHs. The 3 + 4 ring/total PAH ratios show statistically significant differences between HCM (0.73) and Alaska (0.91). The elevated concentrations of PAHs observed in some sampling locations of the Alaskan parks were linked to local combustion of wood, with a component of vehicle particle- and vapor-phase emissions. In HCM, the principal source of PAH emissions has been linked to residential and industrial combustion of coal and vehicle traffic. In contrast to HCM, the Alaskan mosses were distinctly elevated in most of the trace elements, bearing a signature of the underlying geology. H. splendens and P. schreberi showed diverse bioaccumulative capabilities of PAHs in all three study areas.     

Historical changes in atmospheric nitrogen deposition to Cape Cod,Massachusetts, USA

We reconstructed the historical trends in atmospheric deposition of nitrogen to Cape Cod, Massachusetts, from 1910 to 1995 by compiling data from literature sources, and adjusting the data for geographical and methodological differences. The reconstructed data suggest that NO₃-N wet deposition to this region increased from a low of 0.9 kg N ha⁻¹ yr⁻¹ in 1925 to a high of approximately 4 kg N ha⁻¹ yr⁻¹ around 1980. The trend in NO₃-N deposition has remained since the early 1980s at around 3.6 kg N ha⁻¹ yr⁻¹. In contrast, NH₄-N wet deposition decreased from more than 4 kg N ha⁻¹ yr⁻¹ in the mid 1920s to about 1.5 kg N ha⁻¹ yr⁻¹ from the late-1940s until today. Emissions of NO_x-N in the Cape Cod airshed increased at a rate of 2.1 kg N ha⁻¹ per decade since 1910, a rate that is an order of magnitude higher than NO₃-N deposition. Estimates of NH₃ emissions to the northeast United States and Canada have decreased slightly throughout the century, but the decrease in reconstructed N-NH₄⁺ deposition rates does not parallel emissions estimates. The trend in reconstructed total nitrogen deposition suggests an overall increase through the century at a rate of 0.26 kg N ha⁻¹ per decade. This overall increase in deposition may expose coastal forests to rates of nitrogen addition that, if exceeded, could induce nitrogen saturation and increase nitrogen loads to adjoining estuaries.     

Removal of aqueous lead by poorly-crystalline hydroxyapatites

The use of a phosphorus amendment in altering Pb to a chemically less mobile phase is a promising strategy based on minimizing ecotoxicological risk and improving time and cost efficiency. This study evaluated crystalline and poorly-crystalline hydroxyapatite sorbents on removal of aqueous Pb in response to reaction time, solution pH, and Pb concentration. Batch experiments were conducted using a commercially-available crystalline hydroxyapatite (HA), and two poorly-crystalline hydroxyapatites synthesized from gypsum waste (CHA) and incinerated ash of poultry waste (MHA). Poorly-crystalline hydroxyapatites had greater capacity for Pb removal from a solution with a wider pH range as compared to a crystalline hydroxyapatite. The maximum sorption capacity of Pb determined by the Langmuir model was 500 mg g⁻¹ for CHA, 277 mg g⁻¹ for MHA and 145 mg g⁻¹ for HA. Removal of aqueous Pb by CHA was not dependent on solution pH, with a 98.8% reduction throughout the solution pH range of 2–9, whereas aqueous Pb removal by HA and MHA was pH-dependent with less removal in the neutral solution pH. Poorly-crystalline hydroxyapatites may provide an effective alternative to existing remediation technologies for Pb-contaminated sites.