Airborne cadmium in the major monitoring locations in Korea between 1991 and 2004

Air quality monitoring data for cadmium (Cd) collected in 13 cities in Korea over a 14-year period (1991–2004) have been analyzed. In the course of this study, variation of Cd was examined over time and with location to learn about its sources, transport, and removal processes and to help improve air quality control. The results of this study indicate that the spatial distribution of Cd is clearly distinguishable between different cities and that such a pattern is sensitively reflected by such a factor as the level of industrialization. Comparison of the Cd data sets between different cities indicated that its concentration levels observed in highly industrialized cities approached or exceeded 10 ng m⁻³, while those of urban background cities were found to lie in a narrow range of 1–3 ng m⁻³. As such, Cd values determined from the polluted areas were notably higher than the relatively clean ones, at least by several times. The Cd data collected from all study sites were also evaluated with respect to temporal behavior. Inspection of seasonal patterns generally showed the occurrences of the highest Cd value during spring (and winter) and the lowest one during summer. When the long-term pattern of Cd was assessed across all study years, the results differed greatly between different cities in relation to their pollution status. Although Cd concentrations tended to decrease rather abruptly in highly industrialized cities, its patterns for most cities were too variable to project a definitive trend. The results of this analysis thus suggest that Cd concentration levels in most urban areas of Korea are fairly comparable with those commonly seen in the urban background areas of western countries. Considering that most urban areas are affected by various pollution sources and that Cd concentrations have been reduced significantly through the years, more deliberate efforts are needed to further control Cd concentrations in the atmosphere.     

Environmental Pollution Liability Insurance in China: In Need of Strong Government Backing

Environmental pollution liability insurance was officially introduced in China only in 2006, as part of new market-based approaches for managing environmental risks. By 2012, trial applications of pollution insurance had been launched in 14 provinces and cities. More than ten insurance companies have entered the pollution insurance market with their own products and contracts. Companies in environmentally sensitive sectors and high-risk industries bought pollution insurance, and a few successful compensation cases have been reported. Still, pollution insurance faces a number of challenges in China. The absence of a national law weakens the legal basis of pollution insurance, and poor technical support stagnates further implementation. Moreover, current pollution insurance products have limited risk coverage, high premium rates, and low loss ratios, which make them fairly unattractive to polluters. Meanwhile, low awareness of environmental and social liabilities leads to limited demand for pollution insurance products by industrial companies. Hence, the pollution insurance market is not yet flourishing in China. To improve this situation, this economic instrument needs stronger backing by the Chinese state.     

Airborne trace element pollution in 11 European cities assessed by exposure of standardised ryegrass cultures

Within a European biomonitoring programme, Italian ryegrass (Lolium multiflorum Lam.) was employed as accumulative bioindicator of airborne trace elements (As, Cd, Cr, Cu, Fe, Ni, Pb, Sb, V, Zn) in urban agglomerations. Applying a highly standardised method, grass cultures were exposed for consecutive periods of four weeks each to ambient air at up to 100 sites in 11 cities during 2000–2002. Results of the 2001 exposure experiments revealed a clear differentiation of trace element pollution within and among local monitoring networks. Pollution was influenced particularly by traffic emissions. Especially Sb, Pb, Cr, Fe, and Cu exhibited a very uneven distribution within the municipal areas with strong accumulation in plants from traffic-exposed sites in the city centres and close to major roads, and moderate to low levels in plants exposed at suburban or rural sites. Accumulation of Ni and V was influenced by other emission sources. The biomonitoring sites located in Spanish city centres featured a much higher pollution load by trace elements than those in other cities of the network, confirming previously reported findings obtained by chemical analyses of dust deposition and aerosols. At some heavily-trafficked sites, legal thresholds for Cu, Pb, and V contents in foodstuff and animal feed were reached or even surpassed. The study confirmed that the standardised grass exposure is a useful and reliable tool to monitor and to assess environmental levels of potentially toxic compounds of particulate matter.     

Assessment of trace metal distribution and contamination in surface soils of Hong Kong

An intensive investigation was conducted to study the distribution of trace metals in surface soils of Hong Kong and to assess the soil environmental quality. From results of cluster analysis, and comparisons among soil types and areas, it is clearly shown that increases in trace metal concentrations in the soils were generally extensive and obvious in urban and orchard soils, less so in vegetable soils, whilst rural and forest soils were subjected to the least impact of anthropogenic sources of trace metals. However, some of the forest soils also contained elevated levels of As, Cu, and Pb. Urban soils in Hong Kong were heavily polluted by Pb from gasoline combustion. Agricultural soils, both orchard and vegetable soils, usually accumulated As, Cd, Cu, and Zn originating from applications of pesticides, animal manures, and fertilizers. In general, trace metal pollution in soils of the industrial areas and Pb pollution in the soils of the commercial and residential areas were obvious.     

Heavy metals, polycyclic aromatic hydrocarbons and polychlorinated biphenyls in surface sediments of the Naples harbour (southern Italy)

The Naples's harbour is one of the largest and most important commercial and tourist port of the Mediterranean basin. It is located on the southeast coast of Italy and receives industrial and municipal wastewaters from the city of Naples. Due to its social and economic impact, a comprehensive assessment of levels and sources of contamination of bottom sediments in this area of the Mediterranean basin is essential to identify potential danger due to mobilization of contaminants produced by managing of the same sediments. In this study, superficial sediments collected from 189 sampling sites were analyzed for grain size, heavy metals (Cr, Cu, Ni, Pb, V, Zn, Co, Sn, Cd, Hg, As, Al and Fe), 16 priority polycyclic aromatic hydrocarbons (PAHs) and perylene and 38 individual polychlorinated biphenyl (PCB) congeners. Compared to the estimated local background, Cu, Zn, Pb, Cd, Sn and Hg show enrichment factors >3 and only Hg evidences a median value higher than the NOAA (effects range - median) guidelines. Principal component analysis allowed us to clearly discriminate two areas mainly affected by heavy metals contamination and influenced by different sources related to industrial, commercial and/or urban activities. Priority PAHs are predominantly represented by three-five-ring compounds with concentrations ranging between 9 and 31774 ng g(-1) and frequently higher than the NOAA ER-M index. A prevalent pyrolitic origin of PAH was assessed on the basis of the relative abundance of the different congeners and selected isomer ratios. The concentrations of PCBs, as sum of the 38 congeners, ranged from 1 to 899 ng g(-1), with a predominance of highly chlorinated (tetra- and penta-chlorobiphenyls) congeners. WHO-TEQ values, calculated for the PCDD-like PCB congeners, suggest a relatively high level of toxicity. Generally, the concentration of PAHs and PCBs were higher near the sites of intense industrial, shipping and/or commercial activities suggesting a direct influence of these sources on the pollutant distribution patterns.     

Monitoring atmospheric pollutants in the biosphere reserve Wienerwald by a combined approach of biomonitoring methods and technical measurements

In this study a combined approach of bioindication results correlated with an extensive set of data on air pollution and climate was used to assess the pollution status of the Man and Biosphere Reserve Wienerwald (Austria). Bryophytes served as impact indicators (via the Index of Atmospheric Purity-method IAP) at 30 sites as well as accumulation monitors for airborne trace elements (Al, Pb, V, S, Zn, Fe, Cu, Cr, Ni, Co, Mo, Cd, As, Sb and 16 EPA-PAHs) at 10 sites within the reserve. The results of these bioindication methods were subsequently correlated with further pollution (NO(2), SO(2) and dust) and climate data (precipitation, temperature and humidity). The findings obtained clearly indicate the following: Bryophyte distribution is solely influenced by the status of air quality, without interference by climatic or site-related factors, which is in contrast to several previous investigations. IAP-values correlated significantly with NO(2) (0.553; P=0.004), SO(2) winter values (0.511; P=0.013) and PM10 (dust) (0.561; P=0.013). The results obtained via chemical analyses revealed a strong correlation with data derived from the IAP methodology. In terms of the overall air quality within the biosphere reserve Wienerwald, the north-eastern part appears to be the most affected one with a most likely pollution contribution emitted by the capital city Vienna, agriculture and neighbouring countries.     

Source identification and risk assessment of heavy metal contaminations in urban soils of Changsha,a mine-impacted city in Southern China

The urban soils suffered seriously from heavy metal pollutions with rapid industrialization and urbanization in China. In this study, 54 urban soil samples were collected from Changsha, a mine-impacted city located in Southern China. The concentrations of heavy metals (As, Cd, Co, Cu, Mn, Ni, Pb, and Zn) were determined by ICP-MS. The pollution sources of heavy metals were discriminated and identified by the combination of multivariate statistical and geostatistical methods. Four main sources were identified according to the results of hierarchical cluster analysis (HCA), principal component analysis (PCA), and spatial distribution patterns. Co and Mn were primarily derived from soil parent material. Cu, Pb, and Zn with significant positive relationships were associated with mining activities and traffic emissions. Cd and Ni might be affected by commercial activities and industrial discharges. As isolated into a single group was considered to have correlation with coal combustion and waste incineration. Risk assessment of heavy metals in urban soils indicated an overall moderate potential ecological risk in the urban region of Changsha.     

Characterization of lead,cadmium, arsenic and nickel in PM(2.5) particles in the Athens atmosphere,Greece

Concentrations of Pb, Cd, As and Ni in PM(2.5) particles were measured in samples collected, using low volume PM(2.5) samplers (Harvard Impactor system, HI) at two sites in Athens basin; Patission Street in Athens city center and Rentis, a semi-urban and industrial area, during March 1995-March 1996. Sample analysis for Pb, Cd, Ni and As was accomplished by electrothermal atomic absorption spectrometry after total digestion. Annual geometric mean values in 183 PM(2.5) particles samples were found to be: Pb: 143 nanogram(-3); Cd: 0.34 nanogram(-3); Ni: 4.55 nanogram(-3); As: 0.79 nanogram(-3). The geographical and temporal distribution patterns were investigated. Pb exhibited higher values during the winter period. For the other elements no significant seasonal variation was observed. Wind direction, air temperature and relative humidity affected element concentrations. Principal component analysis was applied on the data to enable source apportionment of toxic elements in PM(2.5) particles. It was found that Pb, As and Ni have common sources, which could be vehicles emissions/oil combustion and resuspended road dust. Cd and a portion of As originate from industrial activities.     

Assessment of contribution of SO2 and NO2 from different sources in Jamshedpur region, India

Contribution of pollution from different types of sources in Jamshedpur, the steel city of India, has been estimated in winter 1993 using two approaches in order to delineate and prioritize air quality management strategies for the development of region in an environmental friendly manner. The first approach mainly aims at preparation of a comprehensive emission inventory and estimation of spatial distribution of pollution loads in terms of SO₂ and NO₂ from different types of industrial, domestic and vehicular sources in the region. The results indicate that industrial sources account for 77% and 68% of the total emissions of SO₂ and NO₂, respectively, in the region, whereas vehicular emissions contributed to about 28% of the total NO₂ emissions. In the second approach, contribution of these sources to ambient air quality levels to which the people are exposed to, was assessed through air pollution dispersion modelling. Ambient concentration levels of SO₂ and NO₂ have been predicted in winter season using the ISCST3 model. The analysis indicates that emissions from industrial sources are responsible for more than 50% of the total SO₂ and NO₂ concentration levels. Vehicular activities contributed to about 40% of NO₂ pollution and domestic fuel combustion contributed to about 38% of SO₂ pollution. Predicted 24-h concentrations were compared with measured concentrations at 11 ambient air monitoring stations and good agreement was noted between the two values. In-depth zone-wise analysis of the above indicates that for effective air quality management, industrial source emissions should be given highest priority, followed by vehicular and domestic sources in Jamshedpur region.     

Air pollution in cities

Air quality in cities is the result of a complex interaction between natural and anthropogenic environmental conditions. Air pollution in cities is a serious environmental problem – especially in the developing countries. The air pollution path of the urban atmosphere consists of emission and transmission of air pollutants resulting in the ambient air pollution. Each part of the path is influenced by different factors. Emissions from motor traffic are a very important source group throughout the world. During transmission, air pollutants are dispersed, diluted and subjected to photochemical reactions. Ambient air pollution shows temporal and spatial variability. As an example of the temporal variability of urban air pollutants caused by motor traffic, typical average annual, weekly and diurnal cycles of NO, NO₂, O₃ and O_x are presented for an official urban air-quality station in Stuttgart, southern Germany. They are supplemented by weekly and diurnal cycles of selected percentile values of NO, NO₂, and O₃. Time series of these air pollutants give information on their trends. Results are discussed with regard to air pollution conditions in other cities. Possibilities for the assessment of air pollution in cities are shown. In addition, a qualitative overview of the air quality of the world's megacities is given.     

Atmospheric pollution in an urban environment by tree bark biomonitoring - part II: Sr, Nd and Pb isotopic tracing

The harmful effect of manmade particles on natural processes and human health is documented by a large number of studies showing a positive correlation between particulate matter (PM) concentration and health effects. Diminution of this health risk necessitates among others the precise knowledge of the particle sources, their physical and chemical properties and their dissemination in the environment. Pb isotope ratios have been successfully used during the past decades as tracers of anthropogenic Pb disseminated in the biosphere. Here we show that tree bark biomonitoring with lead (Pb), strontium (Sr) and neodymium (Nd) isotope ratios as tracers allow a thorough analysis of the impacts of industrial and other anthropogenic emissions on the urban environment. This is the first comprehensive multi-isotope tracer study of atmospheric pollution in an urban environment allowing to identify and to integrate the different plume paths of emissions in a digital map system. This innovative approach might become an important tool for environmental management and policy-making processes dealing especially with risks and surveillance of air quality in the urban environment.     

Spatio-temporal variation of element accumulation by Moehringia trinervia in a polluted forest ecosystem (South Poland)

The aim of this study was to identify factors affecting accumulation of elements by Moehringia trinervia (L.) Clairv. in a forest ecosystem impacted by long-term inflow of air pollution. The concentrations of N, S, Ca, K, Mg, Cd, Cu, Fe, Pb and Zn were determined in plants collected in 1999. In addition, Cd, Cu, Pb and Zn content was compared with measurements from 1984. Soil properties and bulk precipitation chemistry were used as explaining variables. The amount of heavy metals accumulated by M. trinervia depended on the magnitude of industrial emissions, but only Cu and Pb concentrations were clearly related to the distance from the pollution sources. The spatial distribution of Fe content was shaped by habitat conditions, whereas the distributions of Cd and Zn content were unexplained. Among the macronutrients, only Mg uptake was affected by environmental properties: it was lower under high concentrations of soil Cd and Zn.     

Using multivariate analyses and GIS to identify pollutants and their spatial patterns in urban soils in Galway, Ireland

Galway is a small but rapidly growing tourism city in western Ireland. To evaluate its environmental quality, a total of 166 surface soil samples (0-10 cm depth) were collected from parks and grasslands at the density of 1 sample per 0.25 km2 at the end of 2004. All samples were analysed using ICP-AES for the near-total concentrations of 26 chemical elements. Multivariate statistics and GIS techniques were applied to classify the elements and to identify elements influenced by human activities. Cluster analysis (CA) and principal component analysis (PCA) classified the elements into two groups: the first group predominantly derived from natural sources, the second being influenced by human activities. GIS mapping is a powerful tool in identifying the possible sources of pollutants. Relatively high concentrations of Cu, Pb and Zn were found in the city centre, old residential areas, and along major traffic routes, showing significant effects of traffic pollution. The element As is enriched in soils of the old built-up areas, which can be attributed to coal and peat combustion for home heating. Such significant spatial patterns of pollutants displayed by urban soils may imply potential health threat to residents of the contaminated areas of the city.     

Distribution,sources and pollution status of Pb in indoor and outdoor dusts of Kerman City,SE Iran

The aims of this study were to explore the status of pollution and the temporal/spatial distribution of indoor and outdoor dust-Pb in the city of Kerman (SE Iran), located in a dry playa and arid climatic zone. Flat panes were laid at appropriate locations, in the indoor and the outdoor spaces of selected one-story houses in different areas of the city, to collect dust samples. Forty-two samples were taken and analyzed using the ICP-MS method. The measurements have shown that the outdoor dust-Pb concentrations varied from 23.7 to 275.2?mg kg^?1, with a mean value of 71.8?mg kg^?1, and indoor dust-Pb concentrations ranged from 47.6 to 150.2?mg kg^?1, with a mean value of 89.6?mg kg^?1. Based on these measurements, Pb was enriched in the outdoor and the indoor dust samples up to 48.8 and 29.4 times, respectively. Dilution, as a result of prevalence of geogenic dust in the outdoor space, is expected to be the main cause of the temporal differences. This study has shown that the eastern part of the city is more polluted compared to the other parts, and, because of the stable air conditions, the concentration of Pb in the summer dust is higher than the other seasons.     

Air Quality in Selected Megacities

Abstract

About half of the world's population now lives in urban areas because of the opportunity for a better quality of life. Many of these urban centers are expanding rapidly, leading to the growth of megacities, which are often defined as metropolitan areas with populations exceeding 10 million inhabitants. These concentrations of people and activity are exerting increasing stress on the natural environment, with impacts at urban, regional and global levels. In recent decades, air pollution has become one of the most important problems of megacities. Initially, the main air pollutants of concern were sulfur compounds, which were generated mostly by burning coal. Today, photochemical smog—induced primarily from traffic, but also from industrial activities, power generation, and solvents—has become the main source of concern for air quality, while sulfur is still a major problem in many cities of the developing world. Air pollution has serious impacts on public health, causes urban and regional haze, and has the potential to contribute significantly to global climate change. Yet, with appropriate planning megacities can efficiently address their air quality problems through measures such as application of new emission control technologies and development of mass transit systems.

This review is focused on nine urban centers, chosen as case studies to assess air quality from distinct perspectives: from cities in the industrialized nations to cities in the developing world. This review considers not only megacities, but also urban centers with somewhat smaller populations, for while each city—its problems, resources, and outlook—is unique, the need for a holistic approach to complex environmental problems is the same. There is no single strategy to reduce air pollution in megacities; a mix of policy measures will be needed to improve air quality. Experience shows that strong political will coupled with public dialogue is essential to effectively implement the regulations required to address air quality.     

Atmospheric pollution in an urban environment by tree bark biomonitoring--part I: trace element analysis

Tree bark has been shown to be a useful biomonitor of past air quality because it accumulates atmospheric particulate matter (PM) in its outermost structure. Trace element concentrations of tree bark of more than 73 trees allow to elucidate the impact of past atmospheric pollution on the urban environment of the cities of Strasbourg and Kehl in the Rhine Valley. Compared to the upper continental crust (UCC) tree barks are strongly enriched in Mn, Ni, Cu, Zn, Cd and Pb. To assess the degree of pollution of the different sites in the cities, a geoaccumulation index I_geo was applied. Global pollution by V, Ni, Cr, Sb, Sn and Pb was observed in barks sampled close to traffic axes. Cr, Mo, Cd pollution principally occurred in the industrial area. A total geoaccumulation index I_GEO-tot was defined; it is based on the total of the investigated elements and allows to evaluate the global pollution of the studied environment by assembling the I_geo indices on a pollution map.     

Air quality for metals and sulfur in Shanghai, China, determined with moss bags

In order to better understand the spatial and temporal distribution pattern of metals and sulfur present in Shanghai, moss bags with Haplocladium microphyllum (Hedw.) Broth. were suspended at 14 local monitoring stations from April through June 2006 in Shanghai, the largest city in China. The results showed that the concentrations of S, Cu, Pb, and Zn in the moss bags after exposure were higher at the sites in the industrial district and most urban districts and lower at the sites in suburban areas, and well correlated with SO₂ API and PM10 API in the air both in terms of space and time. The present study provided evidence that the moss H. microphyllum is suitable for bio-monitoring air pollution with moss bags and further confirmed that the moss-bag method is a simple, inexpensive and useful technique.     

Eco-industrial zones in the context of sustainability development of urban areas

Industry is one of the main activities in the city and in many cities of the world, and the dominant industrial zones are the most significant morphological forms of concentration of industrial facilities in the city and are concentrated industrial and business activity. Industrial parks combine activities related to energy and resource consumption, emissions, waste generation, economic benefits, and regional development. The focus of this work is the path of transformation between the present and the vision of a sustainable city in the future. The problem and the subject of research related to two related objects of research: the city and sustainable development. In this paper, the co-author’s industrial symbiosis parks, modern tendencies of the spatial distribution of productive activities, circular economy, to attract leading corporations and open the way for new ventures while preserving the living environment in an urban area.