Phenol photonitration upon UV irradiation of nitrite in aqueous solution II: effects of pH and TiO2.

Phenol photonitration and photonitrosation were studied both in homogeneous and in heterogeneous phase in the presence of TiO2 particles. The effect of pH as well as of the semiconductor particles on the kinetics and products of the reaction was observed. Formation of nitrophenols is enhanced at acidic pH, due to thermal processes initiated by nitrous acid, as well as in the presence of TiO2, due to the photocatalytic oxidation of nitrite.     

Phenol photonitration upon UV irradiation of nitrite in aqueous solution I: effects of oxygen and 2-propanol.

Nitrophenols are formed in aqueous solution upon UV irradiation of phenol and nitrite. The formation of nitrophenols is enhanced by dissolved oxygen and inhibited by the addition of 2-propanol. The mechanism of phenol photonitration involves both .NO2 (or N2O4, reacting with phenol, and 4-nitrosophenol, which is oxidised to 4-nitrophenol. A reaction scheme is proposed based on experimental results.     

紫外光(UV)光解油田采出水中多环芳烃

为了探讨紫外光光解人工模拟油田采出水中多环芳烃的降解效率,利用自制反应装置对油田采出水中多环芳烃(PAHs)的紫外光光解做了一个初步研究。研究结果证明,紫外光光解对油田采出水中的多环芳烃萘和芴有显著的降解能力。实验室的测试表明,与紫外UVA(365 nm)、UVB(308 nm)的光照相比,紫外UVC(254 nm)在光照60 min的条件下,2种多环芳烃各自的去除率都近似达到了99%。可见,在光解效力和暴露时间两方面,紫外UVC对采出水中萘和芴的去除具有相对稳定和比较高的效率。     

Release of gaseous bromine from the photolysis of nitrate and hydrogen peroxide in simulated sea-salt solutions

We have carried out a series of laboratory experiments to investigate the oxidation of bromide (Br⁻) by hydroxyl radical (OH) in solutions used to mimic sea-salt particles. Aqueous halide solutions with nitrate or hydrogen peroxide (HOOH) as a photochemical source of OH were illuminated with 313 nm light and the resulting gaseous bromine (Br*(g)) was collected. While illumination of these solutions nearly always formed gaseous bromine (predominantly Br₂ based on modeling results), there was no evidence for the release of gaseous chlorine. The rate of Br*(g) release increased (up to a plateau value) with increasing concentrations of bromide and was enhanced at lower pH values for both nitrate and HOOH solutions. Increased ionic strength in nitrate solutions inhibited Br*(g) release and the extent of inhibition was dependent upon the salt used. In HOOH solutions, however, no ionic strength effects were observed and the presence of Cl⁻ strongly enhanced Br*(g) release.Overall, for conditions typical of aged, deliquesced, sea-salt particles, the efficiencies of gaseous bromine release, expressed as mole of Br*(g) released per mole of OH photochemically formed, were typically 20–30%. Using these reaction efficiencies, we calculated the Br₂(g) release rate from aged, ambient sea-salt particles due to OH oxidation to be approximately 0.07 pptv h⁻¹ with the main contributions from nitrate photolysis and partitioning of gas-phase OH into the particle. While our solution conditions are simplified compared to ambient particles, this estimated rate of Br₂ release is high enough to suggest that OH-mediated reactions in sea-salt particles could be a significant source of reactive bromine to the marine boundary layer.     

Laboratory and field evidence of the photonitration of 4-chlorophenol to 2-nitro-4-chlorophenol and of the associated bicarbonate effect

Background, aim and scope  

Photochemical processes can decontaminate the aqueous environment from xenobiotics, but they also produce secondary pollutants. This paper presents field and laboratory evidence of the transformation of 4-chlorophenol (4CP) into 2-nitro-4-chlorophenol (2N4CP).     

Formation of mutagens by photolysis of amino acids in neutral aqueous solution containing nitrite or nitrate ion

Nine amino acids, i.e., alanine, threonine, cysteine, glutamic acid, arginine, proline, tryptophan, phenylalanine and tyrosine, were irradiated with UV light in water containing nitrite or nitrate ion under neutral conditions. The mutagenicities of the ether extracts and the residual water layers of the reaction mixtures were assayed with and without S-9 mix using $\text{Salmonella typhimurium}$ TA98 and TA100. Three aromatic amino acids, tryptophan, phenylalanine and tyrosine, were found to give direct-acting and frameshift mutagens by irradiation in aqueous nitrite solution. Among them, the ether extract of tryptophan exhibited the strongest mutagenicity toward TA98. In the case of irradiation in aqueous nitrate solution, only the ether extract of tryptophan exhibited weak mutagenicity toward TA98 without S-9 mix. The effects of nitrite concentration, irradiation time and pH on mutagen formation from tryptophan and some characteristics of the produced mutagens were examined.     

On the nature of nitrate in coarse continental aerosols

In nonmarine environments, the nitrate (NO₃⁻) aerosol occurs in both the fine fraction (diameter < 2.5 μm) as NH₄NO₃ and in the coarse fraction (diameter ⩾ 2.5 μm). Our summertime studies in the eastern U.S. show that NO₃⁻ is predominantly in the coarse fraction. Strong correlations between coarse NO₃⁻ and the crustal elements suggest that the NO₃⁻ is associated with entrained soil dust. Various formation mechanisms, including artifact NO₃⁻ formation on filters, were examined and it appears that the most important mechanism is the reaction of HNO₃ with airborne crustal constituents.     

On the nature of nitrate particles in a coastal urban area

Application of micro spot and electron microscopy techniques to individual particles in a coastal urban site revealed the following:

• 1.(a) sulfate particles, some of them mixed, dominated the sub-μm (0.3–0.8 μm) size range;
• 2.(b) nitrates were found mostly in the μm size range, in the form of NaNO₃.

The latter was verified by X-ray analysis of individual nitrates. Apparently the NaNO₃ particles were formed through heterogeneous reaction of gaseous HNO₃ with sea salt particles.     

Role of pH in partitioning and cation exchange of aromatic amines on water-saturated soils

Predicting the reversible interactions between aromatic amines and soil is essential for assessing the mobility, bioavailability and exposure from contaminated sites. Reversible sorption mechanisms of aniline and alpha-naphthylamine were investigated by using single and binary solute sorption to five soils at several pH values, and by applying a distributed parameter (DP) model. The DP model assumes linear partitioning of the neutral species into soil organic matter domains and organic cation binding on negative-charged sites with the exchange coefficients represented by a Gaussian probability distribution. Sorption nonlinearity was attributed to cation exchange with varying site affinities, which was adequately simulated using the DP model. Greater uptake by hydrophobic partitioning and selectivity for cation exchange sites was observed for alpha-naphthylamine compared to aniline. Sorption of alpha-naphthylamine was not impacted quantitatively by aniline under those conditions examined; however, aniline sorption was reduced by alpha-naphthylamine with the largest reduction occurring in the soil with the lowest pH. DP model simulations showed that although hydrophobic partitioning increases with soil-solution pH, cation exchange still contributes significantly to the total sorption even at soil-solution pH values greater than pKa + 2.     

Simultaneous removal of chlorinated aromatic hydrocarbons, nitrate, and chromate using micellar-enhanced ultrafiltration

Feasibility of micellar-enhanced ultrafiltration for the mixed waste that is consisted of chlorinated aromatic hydrocarbons, nitrate, and chromate was investigated using a cationic surfactant. The co-presence of nitrate and chromate did not significantly affect the removal of chlorobenzenes, and the co-presence of chlorobenzenes did not affect the removal of nitrate and chromate because chlorobenzenes were solubilized at the hydrophobic interior of the micelles by hydrophobic interaction, but nitrate and chromate were bound to the outer shell by electrostatic interaction. Micellar-enhanced ultrafiltration can be applied to treat the mixed wastes.     

Sensitivity of modelled sulphate and nitrate aerosol to cloud,pH and ammonia emissions

A Lagrangian dispersion model has been used to predict daily sulphate aerosol in 2006 at five UK rural measurement sites and hourly nitrate aerosol in April 2003 at Harwell (UK). The sensitivity of aqueous phase sulphate production to the meteorological input has been investigated. Large differences were found between cloud fraction and cloud liquid water output from the regional and mesoscale Met Office Unified Model. The impact on the sulphate aerosol was relatively small, with the mesoscale meteorology giving better results.Sulphate aerosol production in the aqueous phase was found to be very sensitive to modelled cloud pH. As the cloud becomes acidic sulphate production is greatly limited, conversely if the cloud is basic large amounts of sulphate aerosol are produced. A fixed model pH of 5.8 was found to produce better results than allowing the model to calculate pH which resulted in large over-predictions of measured sulphate aerosol in some episodes.Nitrate aerosol was not sensitive to cloud variables or pH, but showed a slight increase with 30% more ammonia emissions, and a slight decrease with 30% less ammonia.Sulphate production in model runs with fixed pH was not sensitive to changing ammonia emissions, however the sulphate production with modelled pH was very sensitive to plus or minus 30% ammonia. This work suggests that good modelling of ammonia is essential to correct estimation of aqueous phase sulphate aerosol if cloud pH is modelled. It is concluded that modelling to estimate the effect of reduced ammonia emission scenarios on future ambient aerosol levels should also take into account the neutralising effect of ammonia in cloud and hence the effect on aqueous phase production of sulphate.     

The effect of nitrate concentration on sulfide-driven autotrophic denitrification in marine sediment

Copepods have been widely used to evaluate toxicity of metals present in marine environments. However, a technical difficulty is to understand the possible routes of metal uptake and to identify in which tissues or organs metals are being accumulated. Traditional techniques are hard to be employed once each organ has to be analyzed separately. Autoradiography is an alternative technique to circumvent this limitation, since metal distribution in tissues can be visualized and quantified, even in small organisms like copepods. In the present study, accumulation and distribution of ⁶⁴Cu in the copepod Calanus hyperboreus was studied using autoradiography. Copepods were exposed for 2 h to copper (2.3 mg L⁻¹; 1.08 MBq ⁶⁴Cu mg⁻¹ Cu) and then allowed to depurate for 2 h in clean seawater. Total ⁶⁴Cu was determined by gamma-spectrometry after a metal exposure and a depuration period. ⁶⁴Cu distribution was determined based on images generated by autoradiography. Metal accumulation was observed on all external surfaces of the copepods, being accumulated mostly on the ventral region, followed by dorsal, urossoma and internal regions. After depuration, radioactivity levels had a decrease in the sum of external body surface. Our results show that copper uptake by C. hyperboreus is fast and that a non-negligible proportion of the accumulated metal can reach internal tissues, which may lead to detrimental physiological effects. Moreover, whole-body autoradiography was demonstrated to be an efficient technique to study copper accumulation and body distribution in a very small organism such as the copepod C. hyperboreus.     

An in situ study of the effect of nitrate on the reduction of trichloroethylene by granular iron

The effect of nitrate on the reduction of TCE by commercial granular iron was investigated in column experiments designed to allow for the in situ monitoring of the iron surface film with Raman spectroscopy. Three column experiments were conducted; one with an influent solution of 100 mg/l nitrate+1.5 mg/l TCE, and two control columns, one saturated directly with 100 mg/l nitrate solution, the other pre-treated with Millipore water prior to the introduction of a 100 mg/l nitrate solution. In the presence of nitrate, TCE adsorbed onto the iron, but there was little TCE reduction to end-products ethene and ethane. The iron used (Connelly, GPM, Chicago) is a product typical of those used in permeable granular iron walls. The material is covered by an air-formed high-temperature oxidation film, consisting of an inner layer of Fe(3)O(4), and an outer, passive layer of Fe(2)O(3). In the control column pre-treated with Millipore water, the passive Fe(2)O(3) layer was removed upon contact with the water in a manner consistent with an autoreduction reaction. In the TCE+nitrate column and the direct nitrate saturation column, nitrate interfered with the removal of the passive layer and maintained conditions such that high valency protective corrosion species, including Fe(2)O(3) and FeOOH, were stable at the iron surface. The lack of TCE reduction is explained by the presence of these species, as they inhibit both mechanisms proposed for TCE reduction by iron, including catalytic hydrogenation, and direct electron transfer.     

Formation of nitrophenols upon UV irradiation of phenol and nitrate in aqueous solutions and in TiO2 aqueous suspensions.

The formation of nitrophenols was studied as a consequence of ultra violet (UV) irradiation of aqueous solutions of phenol and nitrate in the range of pH 1-12. The study was performed both in homogeneous phase and in the presence of water-suspended TiO2. The effects of pH, dissolved oxygen and 2-propanol as .OH scavenger have been evaluated. A reaction mechanism is proposed, based on the experimental results.     

Disappearance of polycyclic aromatic hydrocarbons sorbed on surfaces of pine [Pinua thunbergii] needles under irradiation of sunlight: Volatilization and photolysis

The solar photodegradation of 16 polycyclic aromatic hydrocarbons (PAHs), sorbed on surfaces of pine [Pinua thunbergii] needles was investigated. The PAHs were produced by combustion of polystyrene and exposed onto the surfaces of pine needles. The disappearance of PAHs sorbed on the pine needle surfaces is mainly caused by volatilization and photolysis, with photolysis playing a major role. The volatilization rates correlate with PAH molecular weight significantly. The photolysis of the 16 PAHs follows first-order kinetics and their photolysis half-lives (t_1/2,P) range from 12.9 h for naphthalene to 65.4 h for fluorene. The PAHs have similar half-lives whether they are sorbed on spruce or pine needles. Compared with water, the cuticular waxes of pine needles can stabilize photolysis of PAHs and facilitate accumulation of PAHs. t_1/2,P for selected PAHs correlate with semi-empirically calculated energy of the highest occupied orbital (E_HOMO). Photochemical behaviors of PAHs are dependent not only on their molecular structures but also the physical–chemical properties of the substrate on which they are adsorbed.